Using the given information, a confidence interval for the population proportion can be constructed at a 94% confidence level.
To construct the confidence interval for the population, we can use the formula for a confidence interval for a proportion. Given that x = 860 (number of successes), n = 1100 (sample size), and a confidence level of 94%, we can calculate the sample proportion, which is equal to x/n. In this case, [tex]\hat{p}= 860/1100 = 0.7818[/tex].
Next, we need to determine the critical value associated with the confidence level. Since the confidence level is 94%, the corresponding alpha value is 1 - 0.94 = 0.06. Dividing this value by 2 (for a two-tailed test), we have alpha/2 = 0.06/2 = 0.03.
Using a standard normal distribution table or a statistical calculator, we can find the z-score corresponding to the alpha/2 value of 0.03, which is approximately 1.8808.
Finally, we can calculate the margin of error by multiplying the critical value (z-score) by the standard error. The standard error is given by the formula [tex]\sqrt{(\hat{p}(1-\hat{p}))/n}[/tex]. Plugging in the values, we find the standard error to be approximately 0.0121.
The margin of error is then 1.8808 * 0.0121 = 0.0227.
Therefore, the confidence interval for the population proportion is approximately ± margin of error, which gives us 0.7818 ± 0.0227. Simplifying, the confidence interval is (0.7591, 0.8045) at a 94% confidence level.
Learn more about population here:
https://brainly.com/question/31598322
#SPJ11
Find the area of the region between the graph of y=4x^3 + 2 and the x axis from x=1 to x=2.
The area of the region between the graph of y=4x³+2 and the x-axis from x=1 to x=2 is 14.8 square units.
To calculate the area of a region, we will apply the formula for integrating a function between two limits. We're going to integrate the given function, y=4x³+2, between x=1 and x=2. We'll use the formula for calculating the area of a region given by two lines y=f(x) and y=g(x) in this problem.
We'll calculate the area of the region between the curve y=4x³+2 and the x-axis between x=1 and x=2.The area is given by:∫₁² [f(x) - g(x)] dxwhere f(x) is the equation of the function y=4x³+2, and g(x) is the equation of the x-axis. Therefore, g(x)=0∫₁² [4x³+2 - 0] dx= ∫₁² 4x³+2 dxUsing the integration formula, we get the answer:14.8 square units.
The area of the region between the graph of y=4x³+2 and the x-axis from x=1 to x=2 is 14.8 square units.
To know more about area visit:
brainly.com/question/32301624
#SPJ11
a plumber charges a rate of $65 per hour for his time but gives a discount of $7 per hour to senior citizens. write an expression which represents a senior citizen's total cost of plumber in 2 different ways
An equation highlighting the discount: y = (65 - 7)x
A simpler equation: y = 58x
The position of a body over time t is described by What kind of damping applies to the solution of this equation? O The term damping is not applicable to this differential equation. O Supercritical damping O Critical damping O Subcritical damping D dt² dt +40.
The solution to the given differential equation d²y/dt² + 40(dy/dt) = 0 exhibits subcritical damping.
The given differential equation is d²y/dt² + 40(dy/dt) = 0, which represents a second-order linear homogeneous differential equation with a damping term.
To analyze the type of damping, we consider the characteristic equation associated with the differential equation, which is obtained by assuming a solution of the form y(t) = e^(rt) and substituting it into the equation. In this case, the characteristic equation is r² + 40r = 0.
Simplifying the equation and factoring out an r, we have r(r + 40) = 0. The solutions to this equation are r = 0 and r = -40.
The discriminant of the characteristic equation is Δ = (40)^2 - 4(1)(0) = 1600.
Since the discriminant is positive (Δ > 0), the damping is classified as subcritical damping. Subcritical damping occurs when the damping coefficient is less than the critical damping coefficient, resulting in oscillatory behavior that gradually diminishes over time.
Therefore, the solution to the given differential equation exhibits subcritical damping.
Learn more about discriminant here:
https://brainly.com/question/27922708
#SPJ11
The average number of customer making order in ABC computer shop is 5 per section. Assuming that the distribution of customer making order follows a Poisson Distribution, i) Find the probability of having exactly 6 customer order in a section. (1 mark) ii) Find the probability of having at most 2 customer making order per section. (2 marks)
The probability of having at most 2 customer making order per section is 0.1918.
Given, The average number of customer making order in ABC computer shop is 5 per section.
Assuming that the distribution of customer making order follows a Poisson Distribution.
i) Probability of having exactly 6 customer order in a section:P(X = 6) = λ^x * e^-λ / x!where, λ = 5 and x = 6P(X = 6) = (5)^6 * e^-5 / 6!P(X = 6) = 0.1462
ii) Probability of having at most 2 customer making order per section.
P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)P(X ≤ 2) = λ^x * e^-λ / x!
where, λ = 5 and x = 0, 1, 2P(X ≤ 2) = (5)^0 * e^-5 / 0! + (5)^1 * e^-5 / 1! + (5)^2 * e^-5 / 2!P(X ≤ 2) = 0.0404 + 0.0673 + 0.0841P(X ≤ 2) = 0.1918
i) Probability of having exactly 6 customer order in a section is given by,P(X = 6) = λ^x * e^-λ / x!Where, λ = 5 and x = 6
Putting the given values in the above formula we get:P(X = 6) = (5)^6 * e^-5 / 6!P(X = 6) = 0.1462
Therefore, the probability of having exactly 6 customer order in a section is 0.1462.
ii) Probability of having at most 2 customer making order per section is given by,
P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2)
Where, λ = 5 and x = 0, 1, 2
Putting the given values in the above formula we get: P(X ≤ 2) = (5)^0 * e^-5 / 0! + (5)^1 * e^-5 / 1! + (5)^2 * e^-5 / 2!P(X ≤ 2) = 0.0404 + 0.0673 + 0.0841P(X ≤ 2) = 0.1918
Therefore, the probability of having at most 2 customer making order per section is 0.1918.
Learn more about probability
brainly.com/question/31828911
#SPJ11
M = { }
N = {6, 7, 8, 9, 10}
M ∩ N =
Answer:The intersection of two sets, denoted by the symbol "∩", represents the elements that are common to both sets.
In this case, the set M is empty, and the set N contains the elements {6, 7, 8, 9, 10}. Since there are no common elements between the two sets, the intersection of M and N, denoted as M ∩ N, will also be an empty set.
Therefore, M ∩ N = {} (an empty set).
Step-by-step explanation:
Do this in two ways: (a) directly from the definition of the observability matrix, and (b) by duality, using Proposition 4.3. Proposition 5.2 Let A and T be nxn and C be pxn. If (C, A) is observable and T is nonsingular, then (T-¹AT, CT) is observable. That is, observability is invariant under linear coordinate transformations. Proof. The proof is left to Exercise 5.1.
The observability of a system can be determined in two ways: (a) directly from the definition of the observability matrix, and (b) through duality using Proposition 4.3. Proposition 5.2 states that if (C, A) is observable and T is nonsingular, then (T^(-1)AT, CT) is also observable, demonstrating the invariance of observability under linear coordinate transformations.
To determine the observability of a system, we can use two approaches. The first approach is to directly analyze the observability matrix, which is obtained by stacking the matrices [C, CA, CA^2, ..., CA^(n-1)] and checking for full rank. If the observability matrix has full rank, the system is observable.
The second approach utilizes Proposition 4.3 and Proposition 5.2. Proposition 4.3 states that observability is invariant under linear coordinate transformations. In other words, if (C, A) is observable, then any linear coordinate transformation (T^(-1)AT, CT) will also be observable, given that T is nonsingular.
Proposition 5.2 reinforces the concept by stating that if (C, A) is observable and T is nonsingular, then (T^(-1)AT, CT) is observable as well. This proposition provides a duality-based method for determining observability.
In summary, observability can be assessed by directly examining the observability matrix or by utilizing duality and linear coordinate transformations. Proposition 5.2 confirms that observability remains unchanged under linear coordinate transformations, thereby offering an alternative approach to verifying observability.
Learn more about matrix here:
https://brainly.com/question/29132693
#SPJ11
Is it possible for a graph with six vertices to have a Hamilton Circuit, but NOT an Euler Circuit. If yes, then draw it. If no, explain why not.
Yes, it is possible for a graph with six vertices to have a Hamilton Circuit, but NOT an Euler Circuit.
In graph theory, a Hamilton Circuit is a path that visits each vertex in a graph exactly once. On the other hand, an Euler Circuit is a path that traverses each edge in a graph exactly once. In a graph with six vertices, there can be a Hamilton Circuit even if there is no Euler Circuit. This is because a Hamilton Circuit only requires visiting each vertex once, while an Euler Circuit requires traversing each edge once.
Consider the following graph with six vertices:
In this graph, we can easily find a Hamilton Circuit, which is as follows:
A -> B -> C -> F -> E -> D -> A.
This path visits each vertex in the graph exactly once, so it is a Hamilton Circuit.
However, this graph does not have an Euler Circuit. To see why, we can use Euler's Theorem, which states that a graph has an Euler Circuit if and only if every vertex in the graph has an even degree.
In this graph, vertices A, C, D, and F all have an odd degree, so the graph does not have an Euler Circuit.
Hence, the answer to the question is YES, a graph with six vertices can have a Hamilton Circuit but not an Euler Circuit.
Learn more about Hamilton circuit visit:
brainly.com/question/29049313
#SPJ11
f(x₁y) = x y let is it homogenuos? IF (yes), which degnu?
The function f(x₁y) = xy is homogeneous of degree 1.
A function is said to be homogeneous if it satisfies the condition f(tx, ty) = [tex]t^k[/tex] * f(x, y), where k is a constant and t is a scalar. In this case, we have f(x₁y) = xy. To check if it is homogeneous, we substitute tx for x and ty for y in the function and compare the results.
Let's substitute tx for x and ty for y in f(x₁y):
f(tx₁y) = (tx)(ty) = [tex]t^{2xy}[/tex]
Now, let's substitute t^k * f(x, y) into the function:
[tex]t^k[/tex] * f(x₁y) = [tex]t^k[/tex] * xy
For the two expressions to be equal, we must have [tex]t^{2xy} = t^k * xy[/tex]. This implies that k = 2 for the function to be homogeneous.
However, in our original function f(x₁y) = xy, the degree of the function is 1, not 2. Therefore, the function f(x₁y) = xy is not homogeneous.
Learn more about function here:
https://brainly.com/question/30721594
#SPJ11
Linear Functions Page | 41 4. Determine an equation of a line in the form y = mx + b that is parallel to the line 2x + 3y + 9 = 0 and passes through point (-3, 4). Show all your steps in an organised fashion. (6 marks) 5. Write an equation of a line in the form y = mx + b that is perpendicular to the line y = 3x + 1 and passes through point (1, 4). Show all your steps in an organised fashion. (5 marks)
Determine an equation of a line in the form y = mx + b that is parallel to the line 2x + 3y + 9 = 0 and passes through point (-3, 4)Let's put the equation in slope-intercept form; where y = mx + b3y = -2x - 9y = (-2/3)x - 3Therefore, the slope of the line is -2/3 because y = mx + b, m is the slope.
As the line we want is parallel to the given line, the slope of the line is also -2/3. We have the slope and the point the line passes through, so we can use the point-slope form of the equation.y - y1 = m(x - x1)y - 4 = -2/3(x + 3)y = -2/3x +
We were given the equation of a line in standard form and we had to rewrite it in slope-intercept form. We found the slope of the line to be -2/3 and used the point-slope form of the equation to find the equation of the line that is parallel to the given line and passes through point (-3, 4
Summary:In the first part of the problem, we found the slope of the given line and used it to find the slope of the line we need to find because it is perpendicular to the given line. In the second part, we used the point-slope form of the equation to find the equation of the line that is perpendicular to the given line and passes through point (1, 4).
Learn more about equation click here:
https://brainly.com/question/2972832
#SPJ11
The math department is putting together an order for new calculators. The students are asked what model and color they
prefer.
Which statement about the students' preferences is true?
A. More students prefer black calculators than silver calculators.
B. More students prefer black Model 66 calculators than silver Model
55 calculators.
C. The fewest students prefer silver Model 77 calculators.
D. More students prefer Model 55 calculators than Model 77
calculators.
The correct statement regarding the relative frequencies in the table is given as follows:
D. More students prefer Model 55 calculators than Model 77
How to get the relative frequencies from the table?For each model, the relative frequencies are given by the Total row, as follows:
Model 55: 0.5 = 50% of the students.Model 66: 0.25 = 25% of the students.Model 77: 0.25 = 25% of the students.Hence Model 55 is the favorite of the students, and thus option D is the correct option for this problem.
More can be learned about relative frequency at https://brainly.com/question/1809498
#SPJ1
Two angles are complementary. One angle measures 27. Find the measure of the other angle. Show your work and / or explain your reasoning
Answer:
63°
Step-by-step explanation:
Complementary angles are defined as two angles whose sum is 90 degrees. So one angle is equal to 90 degrees minuses the complementary angle.
The other angle = 90 - 27 = 63
An equation for the graph shown to the right is: 4 y=x²(x-3) C. y=x²(x-3)³ b. y=x(x-3)) d. y=-x²(x-3)³ 4. The graph of the function y=x¹ is transformed to the graph of the function y=-[2(x + 3)]* + 1 by a. a vertical stretch by a factor of 2, a reflection in the x-axis, a translation of 3 units to the right, and a translation of 1 unit up b. a horizontal stretch by a factor of 2, a reflection in the x-axis, a translation of 3 units to the right, and a translation of 1 unit up c. a horizontal compression by a factor of, a reflection in the x-axis, a translation of 3 units to the left, and a translation of 1 unit up d.a horizontal compression by a factor of, a reflection in the x-axis, a translation of 3 units to the right, and a translation of 1 unit up 5. State the equation of f(x) if D = (x = Rx) and the y-intercept is (0.-). 2x+1 x-1 x+1 f(x) a. b. d. f(x) = 3x+2 2x + 1 3x + 2 - 3x-2 3x-2 6. Use your calculator to determine the value of csc 0.71, to three decimal places. b. a. 0.652 1.534 C. 0.012 d. - 80.700
The value of `csc 0.71` to three decimal places is `1.534` which is option A.
The equation for the graph shown in the right is `y=x²(x-3)` which is option C.The graph of the function `y=x¹` is transformed to the graph of the function `y=
-[2(x + 3)]* + 1`
by a vertical stretch by a factor of 2, a reflection in the x-axis, a translation of 3 units to the right, and a translation of 1 unit up which is option A.
The equation of `f(x)` if `D = (x = Rx)` and the y-intercept is `(0,-2)` is `
f(x) = 2x + 1`
which is option B.
The value of `csc 0.71` to three decimal places is `1.534` which is option A.4. Given a graph, we can find the equation of the graph using its intercepts, turning points and point-slope formula of a straight line.
The graph shown on the right has the equation of `
y=x²(x-3)`
which is option C.5.
The graph of `y=x¹` is a straight line passing through the origin with a slope of `1`. The given function `
y=-[2(x + 3)]* + 1`
is a transformation of `y=x¹` by a vertical stretch by a factor of 2, a reflection in the x-axis, a translation of 3 units to the right, and a translation of 1 unit up.
So, the correct option is A as a vertical stretch is a stretch or shrink in the y-direction which multiplies all the y-values by a constant.
This transforms a horizontal line into a vertical line or a vertical line into a taller or shorter vertical line.6.
The function is given as `f(x)` where `D = (x = Rx)` and the y-intercept is `(0,-2)`. The y-intercept is a point on the y-axis, i.e., the value of x is `0` at this point. At this point, the value of `f(x)` is `-2`. Hence, the equation of `f(x)` is `y = mx + c` where `c = -2`.
To find the value of `m`, substitute the values of `(x, y)` from `(0,-2)` into the equation. We get `-2 = m(0) - 2`. Thus, `m = 2`.
Therefore, the equation of `f(x)` is `
f(x) = 2x + 1`
which is option B.7. `csc(0.71)` is equal to `1/sin(0.71)`. Using a calculator, we can find that `sin(0.71) = 0.649`.
Thus, `csc(0.71) = 1/sin(0.71) = 1/0.649 = 1.534` to three decimal places. Hence, the correct option is A.
To know more about slope visit:
brainly.com/question/3605446
#SPJ11
Worksheet Worksheet 5-MAT 241 1. If you drop a rock from a 320 foot tower, the rock's height after x seconds will be given by the function f(x) = -16x² + 320. a. What is the rock's height after 1 and 3 seconds? b. What is the rock's average velocity (rate of change of the height/position) over the time interval [1,3]? c. What is the rock's instantaneous velocity after exactly 3 seconds? 2. a. Is asking for the "slope of a secant line" the same as asking for an average rate of change or an instantaneous rate of change? b. Is asking for the "slope of a tangent line" the same as asking for an average rate of change or an instantaneous rate of change? c. Is asking for the "value of the derivative f'(a)" the same as asking for an average rate of change or an instantaneous rate of change? d. Is asking for the "value of the derivative f'(a)" the same as asking for the slope of a secant line or the slope of a tangent line? 3. Which of the following would be calculated with the formula )-f(a)? b-a Instantaneous rate of change, Average rate of change, Slope of a secant line, Slope of a tangent line, value of a derivative f'(a). 4. Which of the following would be calculated with these f(a+h)-f(a)? formulas lim f(b)-f(a) b-a b-a or lim h-0 h Instantaneous rate of change, Average rate of change, Slope of a secant line, Slope of a tangent line, value of a derivative f'(a).
1. (a) The rock's height after 1 second is 304 feet, and after 3 seconds, it is 256 feet. (b) The average velocity over the time interval [1,3] is -32 feet per second. (c) The rock's instantaneous velocity after exactly 3 seconds is -96 feet per second.
1. For part (a), we substitute x = 1 and x = 3 into the function f(x) = -16x² + 320 to find the corresponding heights. For part (b), we calculate the average velocity by finding the change in height over the time interval [1,3]. For part (c), we find the derivative of the function and evaluate it at x = 3 to determine the instantaneous velocity at that point.
2. The slope of a secant line represents the average rate of change over an interval, while the slope of a tangent line represents the instantaneous rate of change at a specific point. The value of the derivative f'(a) also represents the instantaneous rate of change at point a and is equivalent to the slope of a tangent line.
3. The formula f(a+h)-f(a)/(b-a) calculates the average rate of change between two points a and b.
4. The formula f(a+h)-f(a)/(b-a) calculates the slope of a secant line between two points a and b, representing the average rate of change over that interval. The formula lim h->0 (f(a+h)-f(a))/h calculates the slope of a tangent line at point a, which is equivalent to the value of the derivative f'(a). It represents the instantaneous rate of change at point a.
Learn more about tangent line here:
https://brainly.com/question/31617205
#SPJ11
Consider the following. +1 f(x) = {x²+ if x = -1 if x = -1 x-1 y 74 2 X -2 -1 2 Use the graph to find the limit below (if it exists). (If an answer does not exist, enter DNE.) lim, f(x)
The limit of f(x) as x approaches -1 does not exist.
To determine the limit of f(x) as x approaches -1, we need to examine the behavior of the function as x gets arbitrarily close to -1. From the given graph, we can see that when x approaches -1 from the left side (x < -1), the function approaches a value of 2. However, when x approaches -1 from the right side (x > -1), the function approaches a value of -1.
Since the left-hand and right-hand limits of f(x) as x approaches -1 are different, the limit of f(x) as x approaches -1 does not exist. The function does not approach a single value from both sides, indicating that there is a discontinuity at x = -1. This can be seen as a jump in the graph where the function abruptly changes its value at x = -1.
Therefore, the limit of f(x) as x approaches -1 is said to be "DNE" (does not exist) due to the discontinuity at that point.
Learn more about function here:
https://brainly.com/question/18958913
#SPJ11
The rate of change of N is inversely proportional to N(x), where N > 0. If N (0) = 6, and N (2) = 9, find N (5). O 12.708 O 12.186 O 11.25 O 10.678
The rate of change of N is inversely proportional to N(x), where N > 0. If N (0) = 6, and N (2) = 9, find N (5). The answer is 12.186.
The rate of change of N is inversely proportional to N(x), which means that the rate of change of N is equal to some constant k divided by N(x). This can be written as dN/dt = k/N(x).
If we integrate both sides of this equation, we get ln(N(x)) = kt + C. If we then take the exponential of both sides, we get N(x) = Ae^(kt), where A is some constant.
We know that N(0) = 6, so we can plug in t = 0 and N(x) = 6 to get A = 6. We also know that N(2) = 9, so we can plug in t = 2 and N(x) = 9 to get k = ln(3)/2.
Now that we know A and k, we can plug them into the equation N(x) = Ae^(kt) to get N(x) = 6e^(ln(3)/2 t).
To find N(5), we plug in t = 5 to get N(5) = 6e^(ln(3)/2 * 5) = 12.186.
Learn more about rate of change here:
brainly.com/question/29181688
#SPJ11
Use implicit differentiation for calculus I to find and where cos(az) = ex+yz (do not use implicit differentiation from calculus III - we will see that later). əx Əy
To find the partial derivatives of z with respect to x and y, we will use implicit differentiation. The given equation is cos(az) = ex + yz. By differentiating both sides of the equation with respect to x and y, we can solve for ǝx and ǝy.
We are given the equation cos(az) = ex + yz. To find ǝx and ǝy, we differentiate both sides of the equation with respect to x and y, respectively, treating z as a function of x and y.
Differentiating with respect to x:
-az sin(az)(ǝa/ǝx) = ex + ǝz/ǝx.
Simplifying and solving for ǝz/ǝx:
ǝz/ǝx = (-az sin(az))/(ex).
Similarly, differentiating with respect to y:
-az sin(az)(ǝa/ǝy) = y + ǝz/ǝy.
Simplifying and solving for ǝz/ǝy:
ǝz/ǝy = (-azsin(az))/y.
Therefore, the partial derivatives of z with respect to x and y are ǝz/ǝx = (-az sin(az))/(ex) and ǝz/ǝy = (-az sin(az))/y, respectively.
To learn more about implicit differentiation visit:
brainly.com/question/11887805
#SPJ11
Which of the following equations correctly expresses the relationship between the two variables?
A. Value=(-181)+14.49 X number of years
B. Number of years=value/12.53
C. Value=(459.34/Number of years) X 4.543
D. Years =(17.5 X Value)/(-157.49)
option B correctly expresses the relationship between the value and the number of years, where the number of years is equal to the value divided by 12.53. The equation that correctly expresses the relationship between the two variables is option B: Number of years = value/12.53.
This equation is a straightforward representation of the relationship between the value and the number of years. It states that the number of years is equal to the value divided by 12.53.
To understand this equation, let's look at an example. If the value is 120, we can substitute this value into the equation to find the number of years. By dividing 120 by 12.53, we get approximately 9.59 years.
Therefore, if the value is 120, the corresponding number of years would be approximately 9.59.
In summary, option B correctly expresses the relationship between the value and the number of years, where the number of years is equal to the value divided by 12.53.
To Know more about The relationship between the two variables Visit:
https://brainly.com/question/606076
#SPJ11
Nonhomogeneous wave equation (18 Marks) The method of eigenfunction expansions is often useful for nonhomogeneous problems re- lated to the wave equation or its generalisations. Consider the problem Ut=[p(x) uxlx-q(x)u+ F(x, t), ux(0, t) – hu(0, t)=0, ux(1,t)+hu(1,t)=0, u(x,0) = f(x), u(x,0) = g(x). 1.1 Derive the equations that X(x) satisfies if we assume u(x, t) = X(x)T(t). (5) 1.2 In order to solve the nonhomogeneous equation we can make use of an orthogonal (eigenfunction) expansion. Assume that the solution can be represented as an eigen- function series expansion and find expressions for the coefficients in your assumption as well as an expression for the nonhomogeneous term.
The nonhomogeneous term F(x, t) can be represented as a series expansion using the eigenfunctions φ_n(x) and the coefficients [tex]A_n[/tex].
To solve the nonhomogeneous wave equation, we assume the solution can be represented as an eigenfunction series expansion. Let's derive the equations for X(x) by assuming u(x, t) = X(x)T(t).
1.1 Deriving equations for X(x):
Substituting u(x, t) = X(x)T(t) into the wave equation Ut = p(x)Uxx - q(x)U + F(x, t), we get:
X(x)T'(t) = p(x)X''(x)T(t) - q(x)X(x)T(t) + F(x, t)
Dividing both sides by X(x)T(t) and rearranging terms, we have:
T'(t)/T(t) = [p(x)X''(x) - q(x)X(x) + F(x, t)]/[X(x)T(t)]
Since the left side depends only on t and the right side depends only on x, both sides must be constant. Let's denote this constant as λ:
T'(t)/T(t) = λ
p(x)X''(x) - q(x)X(x) + F(x, t) = λX(x)T(t)
We can separate this equation into two ordinary differential equations:
T'(t)/T(t) = λ ...(1)
p(x)X''(x) - q(x)X(x) + F(x, t) = λX(x) ...(2)
1.2 Finding expressions for coefficients and the nonhomogeneous term:
To solve the nonhomogeneous equation, we expand X(x) in terms of orthogonal eigenfunctions and find expressions for the coefficients. Let's assume X(x) can be represented as:
X(x) = ∑[A_n φ_n(x)]
Where A_n are the coefficients and φ_n(x) are the orthogonal eigenfunctions.
Substituting this expansion into equation (2), we get:
p(x)∑[A_n φ''_n(x)] - q(x)∑[A_n φ_n(x)] + F(x, t) = λ∑[A_n φ_n(x)]
Now, we multiply both sides by φ_m(x) and integrate over the domain [0, 1]:
∫[p(x)∑[A_n φ''_n(x)] - q(x)∑[A_n φ_n(x)] + F(x, t)] φ_m(x) dx = λ∫[∑[A_n φ_n(x)] φ_m(x)] dx
Using the orthogonality property of the eigenfunctions, we have:
p_m A_m - q_m A_m + ∫[F(x, t) φ_m(x)] dx = λ A_m
Where p_m = ∫[p(x) φ''_m(x)] dx and q_m = ∫[q(x) φ_m(x)] dx.
Simplifying further, we obtain:
(p_m - q_m) A_m + ∫[F(x, t) φ_m(x)] dx = λ A_m
This equation holds for each eigenfunction φ_m(x). Thus, we have expressions for the coefficients A_m:
(p_m - q_m - λ) A_m = -∫[F(x, t) φ_m(x)] dx
The expression -∫[F(x, t) φ_m(x)] dx represents the projection of the nonhomogeneous term F(x, t) onto the eigenfunction φ_m(x).
In summary, the equations that X(x) satisfies are given by equation (2), and the coefficients [tex]A_m[/tex] can be determined using the expressions derived above. The nonhomogeneous term F(x, t) can be represented as a series expansion using the eigenfunctions φ_n(x) and the coefficients A_n.
To learn more about ordinary differential equations visit:
brainly.com/question/32558539
#SPJ11
Determine the derivative of f(x) = 2x x-3 using the first principles.
The derivative of f(x) = 2x/(x-3) using first principles is f'(x) =[tex]-6 / (x - 3)^2.[/tex]
To find the derivative of a function using first principles, we need to use the definition of the derivative:
f'(x) = lim(h->0) [f(x+h) - f(x)] / h
Let's apply this definition to the given function f(x) = 2x/(x-3):
f'(x) = lim(h->0) [f(x+h) - f(x)] / h
To calculate f(x+h), we substitute x+h into the original function:
f(x+h) = 2(x+h) / (x+h-3)
Now, we can substitute f(x+h) and f(x) back into the derivative definition:
f'(x) = lim(h->0) [(2(x+h) / (x+h-3)) - (2x / (x-3))] / h
Next, we simplify the expression:
f'(x) = lim(h->0) [(2x + 2h) / (x + h - 3) - (2x / (x-3))] / h
To proceed further, we'll find the common denominator for the fractions:
f'(x) = lim(h->0) [(2x + 2h)(x-3) - (2x)(x+h-3)] / [(x + h - 3)(x - 3)] / h
Expanding the numerator:
f'(x) = lim(h->0) [2x^2 - 6x + 2hx - 6h - 2x^2 - 2xh + 6x] / [(x + h - 3)(x - 3)] / h
Simplifying the numerator:
f'(x) = lim(h->0) [-6h] / [(x + h - 3)(x - 3)] / h
Canceling out the common factors:
f'(x) = lim(h->0) [-6] / (x + h - 3)(x - 3)
Now, take the limit as h approaches 0:
f'(x) = [tex]-6 / (x - 3)^2[/tex]
For more suhc questiosn on derivative visit:
https://brainly.com/question/23819325
#SPJ8
A car is moving on a straight road from Kuantan to Pekan with a speed of 115 km/h. The frontal area of the car is 2.53 m². The air temperature is 15 °C at 1 atmospheric pressure and at stagnant condition. The drag coefficient of the car is 0.35. Based on the original condition; determine the drag force acting on the car: i) For the original condition ii) If the temperature of air increase for about 15 Kelvin (pressure is maintained) If the velocity of the car increased for about 25% iii) iv) v) If the wind blows with speed of 4.5 m/s against the direction of the car moving If drag coefficient increases 14% when sunroof of the car is opened. Determine also the additional power consumption of the car.
(i) For the original condition, the drag force acting on the car can be determined using the formula:
Drag Force = (1/2) * Drag Coefficient * Air Density * Frontal Area * Velocity^2
Given that the speed of the car is 115 km/h, which is equivalent to 31.94 m/s, the frontal area is 2.53 m², the drag coefficient is 0.35, and the air density at 15 °C and 1 atmospheric pressure is approximately 1.225 kg/m³, we can calculate the drag force as follows:
Drag Force = (1/2) * 0.35 * 1.225 kg/m³ * 2.53 m² * (31.94 m/s)^2 = 824.44 N
Therefore, the drag force acting on the car under the original condition is approximately 824.44 Newtons.
(ii) If the temperature of the air increases by 15 Kelvin while maintaining the pressure, the air density will change. Since air density is directly affected by temperature, an increase in temperature will cause a decrease in air density. The drag force is proportional to air density, so the drag force will decrease as well. However, the exact calculation requires the new air density value, which is not provided in the question.
(iii) If the velocity of the car increases by 25%, we can calculate the new drag force using the same formula as in part (i), with the new velocity being 1.25 times the original velocity. The other variables remain the same. The calculation will yield the new drag force value.
(iv) If the wind blows with a speed of 4.5 m/s against the direction of the car's movement, the relative velocity between the car and the air will change. This change in relative velocity will affect the drag force acting on the car. To determine the new drag force, we need to subtract the wind speed from the original car velocity and use this new relative velocity in the drag force formula.
(v) If the drag coefficient increases by 14% when the sunroof of the car is opened, the new drag coefficient will be 1.14 times the original drag coefficient. We can then use the new drag coefficient in the drag force formula, while keeping the other variables the same, to calculate the new drag force.
Please note that without specific values for air density (in part ii) and the wind speed (in part iv), the exact calculations for the new drag forces cannot be provided.
To learn more about Coefficient - brainly.com/question/1594145
#SPJ11
Suppose that the number of atoms of a particular isotope at time t (in hours) is given by the exponential decay function f(t) = e-0.88t By what factor does the number of atoms of the isotope decrease every 25 minutes? Give your answer as a decimal number to three significant figures. The factor is
The number of atoms of the isotope decreases by a factor of approximately 0.682 every 25 minutes. This means that after 25 minutes, only around 68.2% of the original number of atoms will remain.
The exponential decay function given is f(t) = e^(-0.88t), where t is measured in hours. To find the factor by which the number of atoms decreases every 25 minutes, we need to convert 25 minutes into hours.
There are 60 minutes in an hour, so 25 minutes is equal to 25/60 = 0.417 hours (rounded to three decimal places). Now we can substitute this value into the exponential decay function:
[tex]f(0.417) = e^{(-0.88 * 0.417)} = e^{(-0.36696)} =0.682[/tex] (rounded to three significant figures).
Therefore, the number of atoms of the isotope decreases by a factor of approximately 0.682 every 25 minutes. This means that after 25 minutes, only around 68.2% of the original number of atoms will remain.
Learn more about exponential here: https://brainly.com/question/28596571
#SPJ11
A swimming pool with a rectangular surface 20.0 m long and 15.0 m wide is being filled at the rate of 1.0 m³/min. At one end it is 1.1 m deep, and at the other end it is 3.0 m deep, with a constant slope between ends. How fast is the height of water rising when the depth of water at the deep end is 1.1 m? Let V, b, h, and w be the volume, length, depth, and width of the pool, respectively. Write an expression for the volume of water in the pool as it is filling the wedge-shaped space between 0 and 1.9 m, inclusive. V= The voltage E of a certain thermocouple as a function of the temperature T (in "C) is given by E=2.500T+0.018T². If the temperature is increasing at the rate of 2.00°C/ min, how fast is the voltage increasing when T = 100°C? GIZ The voltage is increasing at a rate of when T-100°C. (Type an integer or decimal rounded to two decimal places as needed.) dv The velocity v (in ft/s) of a pulse traveling in a certain string is a function of the tension T (in lb) in the string given by v=22√T. Find dt dT if = 0.90 lb/s when T = 64 lb. dt *** Differentiate v = 22√T with respect to time t. L al dv dT dt tFr el m F dt Assume that all variables are implicit functions of time t. Find the indicated rate. dx dy x² +5y² +2y=52; = 9 when x = 6 and y = -2; find dt dt dy (Simplify your answer.) ... m al Assume that all variables are implicit functions of time t. Find the indicated rate. dx dy x² + 5y² + 2y = 52; =9 when x = 6 and y = -2; find dt dt dy y = (Simplify your answer.) ...
To find the rate at which the height of water is rising when the depth of water at the deep end is 1.1 m, we can use similar triangles. Let's denote the height of water as h and the depth at the deep end as d.
Using the similar triangles formed by the wedge-shaped space and the rectangular pool, we can write:
h / (3.0 - 1.1) = V / (20.0 * 15.0)
Simplifying, we have:
h / 1.9 = V / 300
Rearranging the equation, we get:
V = 300h / 1.9
Now, we know that the volume V is changing with respect to time t at a rate of 1.0 m³/min. So we can differentiate both sides of the equation with respect to t:
dV/dt = (300 / 1.9) dh/dt
We are interested in finding dh/dt when d = 1.1 m. Since we are given that the volume is changing at a rate of 1.0 m³/min, we have dV/dt = 1.0. Plugging in the values:
1.0 = (300 / 1.9) dh/dt
Now we can solve for dh/dt:
dh/dt = 1.9 / 300 ≈ 0.0063 m/min
Therefore, the height of water is rising at a rate of approximately 0.0063 m/min when the depth at the deep end is 1.1 m.
know more about differentiate :brainly.com/question/13958985
#spj11
what is hcf of 180,189 and 600
first prime factorize all of these numbers:
180=2×2×3×(3)×5
189 =3×3×(3)×7
600=2×2×2×(3)×5
now select the common numbers from the above that are 3
H.C.F=3
Assume that the random variable X is normally distributed, with mean u= 45 and standard deviation o=16. Answer the following Two questions: Q14. The probability P(X=77)= C)0 D) 0.0228 A) 0.8354 B) 0.9772 Q15. The mode of a random variable X is: A) 66 B) 45 C) 3.125 D) 50 148 and comple
The probability P(X=77) for a normally distributed random variable is D) 0, and the mode of a normal distribution is undefined for a continuous distribution like the normal distribution.
14. To find the probability P(X=77) for a normally distributed random variable X with mean μ=45 and standard deviation σ=16, we can use the formula for the probability density function (PDF) of the normal distribution.
Since we are looking for the probability of a specific value, the probability will be zero.
Therefore, the answer is D) 0.
15. The mode of a random variable is the value that occurs most frequently in the data set.
However, for a continuous distribution like the normal distribution, the mode is not well-defined because the probability density function is smooth and does not have distinct peaks.
Instead, all values along the distribution have the same density.
In this case, the mode is undefined, and none of the given options A) 66, B) 45, C) 3.125, or D) 50 is the correct mode.
In summary, the probability P(X=77) for a normally distributed random variable is D) 0, and the mode of a normal distribution is undefined for a continuous distribution like the normal distribution.
Learn more about Standard Deviation here:
https://brainly.com/question/475676
#SPJ11
Consider the following set of constraints: X1 + 7X2 + 3X3 + 7X4 46 3X1 X2 + X3 + 2X4 ≤8 2X1 + 3X2-X3 + X4 ≤10 Solve the problem by Simplex method, assuming that the objective function is given as follows: Minimize Z = 5X1-4X2 + 6X3 + 8X4
Given the set of constraints: X1 + 7X2 + 3X3 + 7X4 ≤ 46...... (1)
3X1 X2 + X3 + 2X4 ≤ 8........... (2)
2X1 + 3X2-X3 + X4 ≤ 10....... (3)
Also, the objective function is given as:
Minimize Z = 5X1 - 4X2 + 6X3 + 8X4
We need to solve this problem using the Simplex method.
Therefore, we need to convert the given constraints and objective function into an augmented matrix form as follows:
$$\begin{bmatrix} 1 & 7 & 3 & 7 & 1 & 0 & 0 & 0 & 46\\ 3 & 1 & 2 & 1 & 0 & 1 & 0 & 0 & 8\\ 2 & 3 & -1 & 1 & 0 & 0 & 1 & 0 & 10\\ -5 & 4 & -6 & -8 & 0 & 0 & 0 & 1 & 0 \end{bmatrix}$$
In the augmented matrix, the last row corresponds to the coefficients of the objective function, including the constants (0 in this case).
Now, we need to carry out the simplex method to find the values of X1, X2, X3, and X4 that would minimize the value of the objective function. To do this, we follow the below steps:
Step 1: Select the most negative value in the last row of the above matrix. In this case, it is -8, which corresponds to X4. Therefore, we choose X4 as the entering variable.
Step 2: Calculate the ratios of the values in the constants column (right-most column) to the corresponding values in the column corresponding to the entering variable (X4 in this case). However, if any value in the X4 column is negative, we do not consider it for calculating the ratio. The minimum of these ratios corresponds to the departing variable.
Step 3: Divide all the elements in the row corresponding to the departing variable (Step 2) by the element in that row and column (i.e., the departing variable). This makes the departing variable equal to 1.
Step 4: Make all other elements in the entering variable column (i.e., the X4 column) equal to zero, except for the element in the row corresponding to the departing variable. To do this, we use elementary row operations.
Step 5: Repeat the above steps until all the elements in the last row of the matrix are non-negative or zero. This means that the current solution is optimal and the Simplex method is complete.In this case, the Simplex method gives us the following results:
$$\begin{bmatrix} 1 & 7 & 3 & 7 & 1 & 0 & 0 & 0 & 46\\ 3 & 1 & 2 & 1 & 0 & 1 & 0 & 0 & 8\\ 2 & 3 & -1 & 1 & 0 & 0 & 1 & 0 & 10\\ -5 & 4 & -6 & -8 & 0 & 0 & 0 & 1 & 0 \end{bmatrix}$$Initial Simplex tableau$ \Downarrow $$\begin{bmatrix} 1 & 0 & 5 & -9 & 0 & -7 & 0 & 7 & 220\\ 0 & 1 & 1 & -2 & 0 & 3 & 0 & -1 & 6\\ 0 & 0 & -7 & 8 & 0 & 4 & 1 & -3 & 2\\ 0 & 0 & -11 & -32 & 1 & 4 & 0 & 8 & 40 \end{bmatrix}$$
After first iteration
$ \Downarrow $$\begin{bmatrix} 1 & 0 & 0 & -3/7 & 7/49 & -5/7 & 3/7 & 8/7 & 3326/49\\ 0 & 1 & 0 & -1/7 & 2/49 & 12/7 & -1/7 & -9/14 & 658/49\\ 0 & 0 & 1 & -8/7 & -1/7 & -4/7 & -1/7 & 3/7 & -2/7\\ 0 & 0 & 0 & -91/7 & -4/7 & 71/7 & 11/7 & -103/7 & 968/7 \end{bmatrix}$$
After the second iteration
$ \Downarrow $$\begin{bmatrix} 1 & 0 & 0 & 0 & -6/91 & 4/13 & 7/91 & 5/13 & 2914/91\\ 0 & 1 & 0 & 0 & 1/91 & 35/26 & 3/91 & -29/26 & 1763/91\\ 0 & 0 & 1 & 0 & 25/91 & -31/26 & -2/91 & 8/26 & 54/91\\ 0 & 0 & 0 & 1 & 4/91 & -71/364 & -11/364 & 103/364 & -968/91 \end{bmatrix}$$
After the third iteration
$ \Downarrow $$\begin{bmatrix} 1 & 0 & 0 & 0 & 6/13 & 0 & 2/13 & 3/13 & 2762/13\\ 0 & 1 & 0 & 0 & 3/13 & 0 & -1/13 & -1/13 & 116/13\\ 0 & 0 & 1 & 0 & 2/13 & 0 & -1/13 & 2/13 & 90/13\\ 0 & 0 & 0 & 1 & 4/91 & -71/364 & -11/364 & 103/364 & -968/91 \end{bmatrix}$$
After the fourth iteration
$ \Downarrow $
The final answer is:
X1 = 2762/13,
X2 = 116/13,
X3 = 90/13,
X4 = 0
Therefore, the minimum value of the objective function
Z = 5X1 - 4X2 + 6X3 + 8X4 is given as:
Z = (5 x 2762/13) - (4 x 116/13) + (6 x 90/13) + (8 x 0)
Z = 14278/13
Therefore, the final answer is Z = 1098.15 (approx).
To know more about Simplex method visit
brainly.com/question/30387091
#SPJ11
True or false? For nonzero m, a, b ≤ Z, if m | (ab) then m | a or m | b.
False. For nonzero integers a, b, and c, if a| bc, then a |b or a| c is false. The statement is false.
For nonzero integers a, b, and m, if m | (ab), then m | a or m | b is not always true.
For example, take m = 6, a = 4, and b = 3. It can be seen that m | ab, as 6 | 12. However, neither m | a nor m | b, as 6 is not a factor of 4 and 3.
to know more about nonzero integers visit :
https://brainly.com/question/29291332
#SPJ11
Define T: P2 P₂ by T(ao + a₁x + a₂x²) = (−3a₁ + 5a₂) + (-4a0 + 4a₁ - 10a₂)x+ 5a₂x². Find the eigenvalues. (Enter your answers from smallest to largest.) (21, 22, 23) = Find the corresponding coordinate elgenvectors of T relative to the standard basls {1, x, x²}. X1 X2 x3 = Find the eigenvalues of the matrix and determine whether there is a sufficient number to guarantee that the matrix is diagonalizable. (Recall that the matrix may be diagonalizable even though it is not guaranteed to be diagonalizable by the theorem shown below.) Sufficient Condition for Diagonalization If an n x n matrix A has n distinct eigenvalues, then the corresponding elgenvectors are linearly Independent and A is diagonalizable. Find the eigenvalues. (Enter your answers as a comma-separated list.) λ = Is there a sufficient number to guarantee that the matrix is diagonalizable? O Yes O No ||
The eigenvalues of the matrix are 21, 22, and 23. The matrix is diagonalizable. So, the answer is Yes.
T: P2 P₂ is defined by T(ao + a₁x + a₂x²) = (−3a₁ + 5a₂) + (-4a0 + 4a₁ - 10a₂)x+ 5a₂x².
We need to find the eigenvalues of the matrix, the corresponding coordinate eigenvectors of T relative to the standard basis {1, x, x²}, and whether the matrix is diagonalizable or not.
Eigenvalues: We know that the eigenvalues of the matrix are given by the roots of the characteristic polynomial, which is |A - λI|, where A is the matrix and I is the identity matrix of the same order. λ is the eigenvalue.
We calculate the characteristic polynomial of T using the definition of T:
|T - λI| = 0=> |((-4 - λ) 4 0) (5 3 - 5) (0 5 - λ)| = 0=> (λ - 23) (λ - 22) (λ - 21) = 0
The eigenvalues of the matrix are 21, 22, and 23.
Corresponding coordinate eigenvectors:
We need to solve the system of equations (T - λI) (v) = 0, where v is the eigenvector of the matrix.
We calculate the eigenvectors for each eigenvalue:
For λ = 21, we have(T - λI) (v) = 0=> ((-25 4 0) (5 -18 5) (0 5 -21)) (v) = 0
We get v = (4, 5, 2).
For λ = 22, we have(T - λI) (v) = 0=> ((-26 4 0) (5 -19 5) (0 5 -22)) (v) = 0
We get v = (4, 5, 2).
For λ = 23, we have(T - λI) (v) = 0=> ((-27 4 0) (5 -20 5) (0 5 -23)) (v) = 0
We get v = (4, 5, 2).
The corresponding coordinate eigenvectors are X1 = (4, 5, 2), X2 = (4, 5, 2), and X3 = (4, 5, 2).
Diagonalizable: We know that if the matrix has n distinct eigenvalues, then it is diagonalizable. In this case, the matrix has three distinct eigenvalues, which means the matrix is diagonalizable.
The eigenvalues of the matrix are λ = 21, 22, 23. There is a sufficient number to guarantee that the matrix is diagonalizable. Therefore, the answer is "Yes."
To know more about the eigenvalues visit:
https://brainly.com/question/32806629
#SPJ11
a line passes through the point (-3, -5) and has the slope of 4. write and equation in slope-intercept form for this line.
The equation is y = 4x + 7
y = 4x + b
-5 = -12 + b
b = 7
y = 4x + 7
Answer:
y=4x+7
Step-by-step explanation:
y-y'=m[x-x']
m=4
y'=-5
x'=-3
y+5=4[x+3]
y=4x+7
Let f(x) = = 7x¹. Find f(4)(x). -7x4 1-x
The expression f(4)(x) = -7x4(1 - x) represents the fourth derivative of the function f(x) = 7x1, which can be written as f(4)(x).
To calculate the fourth derivative of the function f(x) = 7x1, we must use the derivative operator four times. This is necessary in order to discover the answer. Let's break down the procedure into its individual steps.
First derivative: f'(x) = 7 * 1 * x^(1-1) = 7
The second derivative is expressed as follows: f''(x) = 0 (given that the derivative of a constant is always 0).
Because the derivative of a constant is always zero, the third derivative can be written as f'''(x) = 0.
Since the derivative of a constant is always zero, we write f(4)(x) = 0 to represent the fourth derivative.
As a result, the value of the fourth derivative of the function f(x) = 7x1 cannot be different from zero. It is essential to point out that the formula "-7x4(1 - x)" does not stand for the fourth derivative of the equation f(x) = 7x1, as is commonly believed.
Learn more about derivative here:
https://brainly.com/question/25324584
#SPJ11
Prove that |1-wz|² -|z-w|² = (1-|z|³²)(1-|w|²³). 7. Let z be purely imaginary. Prove that |z-1|=|z+1).
The absolute value only considers the magnitude of a complex number and not its sign, we can conclude that |z - 1| = |z + 1| when z is purely imaginary.
To prove the given identity |1 - wz|² - |z - w|² = (1 - |z|³²)(1 - |w|²³), we can start by expanding the squared magnitudes on both sides and simplifying the expression.
Let's assume z and w are complex numbers.
On the left-hand side:
|1 - wz|² - |z - w|² = (1 - wz)(1 - wz) - (z - w)(z - w)
Expanding the squares:
= 1 - 2wz + (wz)² - (z - w)(z - w)
= 1 - 2wz + (wz)² - (z² - wz - wz + w²)
= 1 - 2wz + (wz)² - z² + 2wz - w²
= 1 - z² + (wz)² - w²
Now, let's look at the right-hand side:
(1 - |z|³²)(1 - |w|²³) = 1 - |z|³² - |w|²³ + |z|³²|w|²³
Since z is purely imaginary, we can write it as z = bi, where b is a real number. Similarly, let w = ci, where c is a real number.
Substituting these values into the right-hand side expression:
1 - |z|³² - |w|²³ + |z|³²|w|²³
= 1 - |bi|³² - |ci|²³ + |bi|³²|ci|²³
= 1 - |b|³²i³² - |c|²³i²³ + |b|³²|c|²³i³²i²³
= 1 - |b|³²i - |c|²³i + |b|³²|c|²³i⁵⁵⁶
= 1 - bi - ci + |b|³²|c|²³i⁵⁵⁶
Since i² = -1, we can simplify the expression further:
1 - bi - ci + |b|³²|c|²³i⁵⁵⁶
= 1 - bi - ci - |b|³²|c|²³
= 1 - (b + c)i - |b|³²|c|²³
Comparing this with the expression we obtained on the left-hand side:
1 - z² + (wz)² - w²
We see that both sides have real and imaginary parts. To prove the identity, we need to show that the real parts are equal and the imaginary parts are equal.
Comparing the real parts:
1 - z² = 1 - |b|³²|c|²³
This equation holds true since z is purely imaginary, so z² = -|b|²|c|².
Comparing the imaginary parts:
2wz + (wz)² - w² = - (b + c)i - |b|³²|c|²³
This equation also holds true since w = ci, so - 2wz + (wz)² - w² = - 2ci² + (ci²)² - (ci)² = - c²i + c²i² - ci² = - c²i + c²(-1) - c(-1) = - (b + c)i.
Since both the real and imaginary parts are equal, we have shown that |1 - wz|² - |z - w|² = (1 - |z|³²)(1 - |w|²³), as desired.
To prove that |z - 1| = |z + 1| when z is purely imaginary, we can use the definition of absolute value (magnitude) and the fact that the imaginary part of z is nonzero.
Let z = bi, where b is a real number and i is the imaginary unit.
Then,
|z - 1| = |bi - 1| = |(bi - 1)(-1)| = |-bi + 1| = |1 - bi|
Similarly,
|z + 1| = |bi + 1| = |(bi + 1)(-1)| = |-bi - 1| = |1 + bi|
Notice that both |1 - bi| and |1 + bi| have the same real part (1) and their imaginary parts are the negatives of each other (-bi and bi, respectively).
Since the absolute value only considers the magnitude of a complex number and not its sign, we can conclude that |z - 1| = |z + 1| when z is purely imaginary.
To know more about complex number click here :
https://brainly.com/question/14329208
#SPJ4
