Answer:
41.8 g of water.
Explanation:
To solve this, we introduce the concept of mol.
1 mol of anything contains 6.02×10²³ particles.
In this case, we talk about molecules of water.
Molecular weigh is 18 g/mol which indicates that 1 mol of water weighs 18 g.
So let's do the conversion
(18 g of water / 6.02×10²³ 1 mol of molecules) . 1.4×10²⁴ molecules = 41.8 g
What is the purpose of a buffer?
Answer: A buffer solution is a solution made to prevent the pH level of something from changing when you add a base or an acid to it. For example, if you put a buffer solution in a pool, and then you put chlorine in it, the chlorine's effect on the PH level will be suppressed.
State of matter
A gas made up of homonuclear diatomic molecules escapes through a pinhole 3.98 times as fast as oxygen gas. Write the Chemical formula of the gas.
Answer:
H₂
Explanation:
To solve this question we must find, as first, find the molar mass of the homonuclear diatomic gas using Graham's law. With the molar mass we can identify this gas
Graham's law:
[tex]\frac{V_a}{V_b} =\sqrt{\frac{m_B}{m_A} }[/tex]
Where V is the speed of the gases and m the molar mass of those:
As Va is 3.98 times Vb (And mB is molar mass of oxygen gas = 32g/mol)
[tex]3.98 =\sqrt{\frac{32g/mol}{m_A} }[/tex]
15.84 = 32g/mol / mA
mA = 2.02g/mol
As is a homonuclear diatomic gas, the molar mass of the atom is 1.01g/mol. Thus, the gas is:
H₂Why can more water vapor (water molecules that are in the gas state of matter) be present in warm air than in cold air?
Answer:
Because warm air is less dense
Explanation:
what is the name of the chemical used for bleach in sugar industries?
Answer:
Sulfur Dioxide
Explanation:
Sulfur dioxide is the chemical that, when released by factories using fossil fuels, combines with the atmosphere and can produce acid raid.
how do you make a potion of slow falling
Answer:
So you can make it longer by putting in some redstone. And this will give you a potion that will last for 4 minutes. Alright we're done it's got 4 minute slow falling potions.
Explanation:
Answer:
Ok, to make a slow falling potion, you need 1 water bottle, 1 nether wart, and 1 fantom membrane.
Explanation:
hope I could help, lmk if I did!
Bobby has a toy car that is sitting at rest on the floor. He decides to play with his toy car and pushes it with 3 newtons to the right. Bobby's friend Sam also decides to play with the toy car and pushes it with 6 newtons to the left at the exact same time. Which of the following best describes the resulting motion of the toy car? A It travels to the right at an increasing speed. B It travels to the right at a constant speed. C It travels to the left at an increasing speed. D It travels to the left at a constant speed.
Answer: D
Explanation:
The car will move to the left because Sam is implying a grater force (3 N < 6 N) but it is traveling at a constant speed because there is still a force being acted upon it. <3
The result of applying forces to a toy car is required.
Option D is correct.
Force applied by Bobby is 3 N to the right
Force applied by Sam is 6 N to the left
Right is taken as positive and left is taken as negative.
m = Mass of toy
a = Acceleration
Net force applied to the toy
[tex]F=3-6\\\Rightarrow F=-3\ \text{N}\\\Rightarrow ma=-3\\\Rightarrow a=\dfrac{-3}{m}[/tex]
So, the toy will move left with a constant acceleration.
Constant acceleration means its speed will be increasing.
So, option D is correct.
Learn more:
https://brainly.com/question/18373733?referrer=searchResults
What did Rutherford contribute to the model of the atom?
the neutron
the proton
the nucleus
the electron
Answer:
the nucleus
Explanation:
He proposed that the mass of an atom is concentrated in the nucleus which occupies a small volume in the center .He added that the nucleus comprises the protons and neutrons.where the neutron had no charge while the protons had charge of +1
Answer:
the nucleus
Explanation:
3 miles of NaCl in 12 liters of water
What is the molarity
Answer:
[tex]12 \: litres \: contain \: 3 \: \: moles \: of \: sodium \: chloride \\ 1 \: litre \: will \: contain \: \frac{(1 \times 3)}{12} moles \\ = 0.25 \: mol \: {l}^{ - 1} [/tex]
Explanation:
[tex]12 \: litres \: contain \: 3 \: \: moles \: of \: sodium \: chloride \\ 1 \: litre \: will \: contain \: \frac{(1 \times 3)}{12} moles \\ = 0.25 \: mol \: {l}^{ - 1} \\ or : 0.25 \: M[/tex]
answer asap pls i give brainliest
Answer:
B. Revolution is a planet's movement around the sun causing four seasons the occur. Rotation is the spinning of the planet on its axis causing day and night.
Which contains more carbon 4.71 g of C6H12O6 or 5.85 g C2H6O?
Answer:
5.85 g C2H6O has more carbon
Explanation:
Weight of carbon in 4.71 g of C6H12O6
[tex]4.71 * 12.01\\56.5671\\[/tex] grams
Weight of carbon in 5.85 g of C2H6O
[tex]5.85 * 12.01\\70.259\\[/tex] grams
Hence, 5.85 g C2H6O has more carbon
Graphene is made of pure _______________.
Answer:
Graphene is made of pure carbon.
Explanation:
It is a material in which the carbon atoms are arranged in a single layer, creating a honeycomb pattern. It should be stressed that this layer of carbon is only one atom thick, although some authors consider up to ten layers of carbon to be graphene.
please mark me brainliest
6
Use the image of an element square to answer the following
questions:
C
Carbon
12.01
What does the 6 in the upper left
represent?
What does the 12.01 represent?
Answer:
the 6 stands for the atomic number
the 12.01 stands for the atomic mass
HELP!!! WILL MARK BRAINLIEST!!!
picture attached below
Answer:
0.2 cm
Explanation:
looking at the ruler, you can see that the diameter is 0.4 cm. to get the radius, just divide by two, which gets 0.2 cm as the radius
5. The number of atoms in 9.2 g of Na will be: A. 6.2 x 1023 atoms B. 2.408 x 1023 atoms C. 9.2 x1023 atoms D. 23 atoms E. 9.2 atoms
Answer:
The answer is "Option B"
Explanation:
Formula:
Na atoms= Na atoms moles \times NA
[tex]= \frac{mass}{Na \ Molar\ mass} \times 6.022 \times 10^{23}\\\\= \frac{9.2}{23} \times 6.022 \times 10^{23}\\\\=0.2875 \times 6.022 \times 10^{23}\\\\=2.4 \times 10^{23}\ atoms \\\\[/tex]
Which of the following is not an example of a chemical change?
A. rusting iron B. an apple ripening C. cutting paper D. a piece of wood burning
Answer:
cutting paper is not an example of chemical change.
Explanation:
cutting paper is physical change, its physical properties (size, shape ) change but chemical composition remain same.
The cutting paper is not a example of chemical change of a chemical reaction.
What is chemical reaction?The kind of reaction in which one kind of element get converted into another kind of elements or molecule is referred as chemical reaction.
What is chemical changes?
Chemical changes take place when a material combines with the other to generate a new substance, a process known as chemical synthesis, or when a molecule decomposes into more than one separate chemicals, a process known as chemical decomposition. These processes are known as chemical reactions, and they are generally irreversible unless they are followed by more chemical reactions.
Cutting paper is just a physical change not chemical change since the paper's characteristics did not change; only the shape, which would be a physical attribute, changed. The term "chemical change" refers to a change in a substance's chemical properties. Burning of paper, for example, or rusting of iron.
Therefore, cutting paper is not a example of chemical change.
To know more about chemical change.
https://brainly.com/question/8159283.
#SPJ2
What effect does an increase in carbon dioxide (CO 2 ) have on the concentration of hydrogen ions (H^ + ) in the blood?
Answer:
As the level of carbon dioxide in the blood increases, more H+ is produced and the pH decreases. This increase in carbon dioxide and subsequent decrease in pH reduce the affinity of hemoglobin for oxygen. The oxygen dissociates from the Hb molecule, shifting the oxygen dissociation curve to the right.
Which term identifies a type of intermolecular force?
A.
covalent bonding
B.
hydrogen bonding
C.
ionic bonding
D.
metallic bonding
Answer: B. Hydrogen Bonding
Explanation: I got it right on castle learning lol
There are different kinds of forces. The term that identifies a type of intermolecular force is hydrogen bonding.
The three known to be types of intermolecular interactions. They are
Dipole–dipole interactions London dispersion forces hydrogen bonds.
Hydrogen bonding is known to be an intermolecular force that takes place between two molecules. That molecule is known to have a hydrogen atom be bonded to a nitrogen, oxygen, or fluorine atom.
Learn more about Bond from
https://brainly.com/question/1420470
Which is composed of alkenes? welding torch fuel polystyrene cups propane gas degreaser containing hexane
Answer:
welding torch fuel
Explanation:
Alkenes are chemical compounds formed by a carbon atom and a hydrogen atom. They have an open chain with double bonds between two carbon acts. They are widely used in the composition of fuels, such as welding torch fuel and have as main characteristics the solubility in solvents, the insolubility in water, high melting and boiling point and the absence of colors.
Welding torch fuel is composed of alkenes. The alkenes comprise a series of compounds that are composed of carbon and hydrogen atoms with at least one double bond in the carbon chain.
What are alkenes?Alkenes are a homologous series of hydrocarbons that contain a carbon-carbon double bond.
The number of hydrogen atoms in an alkene is double the number of carbon atoms, so they have the general formula [tex]C_nH _2 _n[/tex].
For example, the molecular formula of ethene is [tex]C _2 H _4[/tex] , while for propene it is [tex]C _3 H _6[/tex].
Alkenes are chemical compounds formed by a carbon atom and a hydrogen atom.
They have an open chain with double bonds between two carbon acts.
They are widely used in the composition of fuels, such as welding torch fuel and have as main characteristics the solubility in solvents, the insolubility in water, high melting and boiling point and the absence of colors.
Hence, the Welding torch fuel is composed of alkenes.
Learn more about the alkenes here:
https://brainly.com/question/13910028
#SPJ5
answer truthfully:))
Answer:
Formula: [tex]Velocity \: V = f \lambda \\ Solution: = 5 \times 0.8 \\ = 4 \: {ms}^{ - 1} [/tex]
Answer:
The first guy is correct. That's what I got too
. What is the molarity of 5.30 moles of NaCl dissolved in 0.400 L of solution?
Answer:
13.25 M
Explanation:
Molarity is moles over liters so simply plug your values in as such:
5.30 mol ÷ 0.400 L = 13.25 M
How much so you can be dissolved and 50 mL of water at 30 Celsius see chart:)
Answer:
The correct answer is - 100 grams.
Explanation:
The solubility graph is a very useful tool because it tells you the amount of solute that can be dissolved per 100 mL of water in order to have a saturated solution of potassium nitrate at a given temperature.
In order to find the solubility of the salt at 30 ∘ C , start from the 30 ∘ C
mark on the graph and move up until you intersect the curve. At the point of intersection, move left until you intersect the y axis and read off the value that you land on which is 200. However, it is for 100 ml so half the value you read:
200/2 = 100 gram .
So, solubility ≈ 100 g / 50 mL water
So, a saturated solution of solute will hold about 100 g of dissolved solute, that is of dissociated solute, per 50 mL of water at 30 ∘ C .
If you put a link, you will be reported.
Answer:
5ppm
Explanation:
there are 1 million (1,000,000) µg (micrograms or mcg) per g (gram) ("micro" means millionth). So, 4. 1 part per million (ppm) for a 1g sample is 1 µg or .
I know you said no links, but this is a converter that explained it much better than I know how to
http://www.endmemo.com/sconvert/ppmug_g.php#:~:text=%C2%BB%20Microgram%2Fgram%20Conversions%3A&text=ug%2Fg%E2%86%94ppm%201%20ug%2Fg%20%3D%201%20ppm
heres a screenshot of the site (since i understand links are awful)
Which statement explains why carbon-14 dating cannot be used to date ancient rocks?
O Carbon-14 decays at a varying rate.
O Carbon-14 decays quickly leaving the amount too small to measure.
O Carbon-14 can be used only to date the remains of organisms.
O Carbon-14 has a half-life that is much longer than potassium.
Answer: Carbon-14 decays quickly leaving the amount too small to measure.
Explanation:
Answer:
b
Explanation:
i did it
Forensic biologist Manning is looking at a cell sample under the microscope. The cell she sees is oval, with a long tail or flagellum. Immediately, she knows that this is a ________ cell.
red blood
skin
sperm
plant
Answer:
Sperm Cell
Explanation:
This attached picture !!
Make up a short story to explain jays speed and acceleration change throughout his walk. Make sure to address parts A-D
Answer:
Speed of jays increases first, again increases, decreases and then increases.
Explanation:
The speed of jays increases while moving from rest to point A and no acceleration due to constant speed. From point A to point B, the speed is continues to increase and no acceleration. From point B to point C, the speed of jays decreases and acceleration is produced in the journey due to change of speed and from point C to point D, the speed of jays again increases and acceleration is produced due to increasing the speed.
Answer:
The speed of jay's walk increases first, again increases, then it decreases and then increases due to his acceleration walk during parts A-D.
Explanation:
IS ANYONE GOOD AT CHEMISTRY?! i need help please lol
Answer:
I'm ok at it.
Explanation:
I can try to help if you need anything:)
Help Plz
How does temperature relate to energy?
Answer:
temperature a measurement of the average amount of energy PER UNIT OF STUFF
Heat Energy is TOTAL ENERGY IN THE STUFF
So, that's why the difference. If you have two things at the same temperature, then any one mole (which is the same as how many molecules or atoms it takes to make up the molecular weight of something in grams.. so one mole of Hydrogen weighs 1 gram, 1 mole of helium weighs 2 grams, 1 mole of Gold weight 196 grams) of the stuff will have the same amount of energy as one mole of the other stuff. If you measure by total mass though, then you realize that there are more water molecules than gold ones in the same volume of stuff, and heat is about volume and molecular density, not mass.
This is why some Stirling engine folks who have made solar plants use Helium as the working gas.. it contains a huge amount of heat for its volume (also because it is very compressible)
So.. Delta Q goes with moles, not mass.
which of the following is true about these diagrams
Answer:
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
Explanation:
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
N/A NO DIAGRAM
A 1.0 liter flask contains 90.1 moles of water vapor at 27.0 oC. What is the pressure of the gas?
Answer:
The pressure of the gas is 224839.8 atm
Explanation:
As we know
PV = nRT
Substituting the given values, we get -
P * 1 L = 90.1 moles * 8.314 4621(75). J K−1 mol−1 * 300
P = 224839.8 atm
The pressure of the gas is 224839.8 atm
