Cora is a network engineer for a large company and has been given instructions on how to configure a private fiber connection between her company's data center and the cloud service provider her company uses. She needs to configure an ASN on one of the core routers in the data center as part of the connection. Which of the following protocols is she most likely being instructed to configure for use with the CSP?

Answer:

the main difference between copyrighted graphics and written works is that copyrighted graphics are protected by copyright law, while written works are protected by both copyright and intellectual property law. Copyright law grants exclusive rights to the author of the work (such as the right to reproduce or distribute the work) while intellectual property law protects the expression of ideas.

Answer:

Explanation:

See the attached.

Answer:

The metric that Beri might be looking at is the frame check sequence (FCS) error rate. The FCS error rate measures the number of frames that are received with errors due to corruption or other issues. A high FCS error rate indicates that frames are being corrupted as they are being sent across the network.

Computers are text-based systems. Users must key in commands to tell the computer what to do. The primary method of input is the keyboard; a mouse is not needed.

In order to interact with the computer, a user must input commands into the system in order to give the computer instructions. The commands are usually in the form of words, numbers, and symbols. After the user enters the command, the computer will process the command and respond accordingly. The user can then type in more commands and the computer will repeat the process until the user is finished. This method of input allows users to be very precise in their instructions, as each individual command is processed and executed by the computer.

For more such questions on Computers

https://brainly.com/question/28498043

#SPJ11

The following circuit connects the output of a comparator (U1A) to an LED (D1). The condition is correct.

To determine if the condition is correct, we must examine the circuit and the functionality of the components. U1A is a comparator, meaning it takes two inputs and compares them. If the input voltage of U1A is higher than the reference voltage, U1A's output will be high (1). D1 is an LED, meaning when it is activated it will produce light. In this circuit, D1 is connected to U1A's output. Therefore, if U1A's output is high, the LED will be activated, and if U1A's output is low, the LED will not be activated.

To determine if the condition is correct, we must consider the logic of the circuit. If U1A's input voltage is higher than the reference voltage, U1A's output will be high and the LED will be activated. Therefore, the given condition is correct.

For such more questions on circuit :

brainly.com/question/28655795

#SPJ11

The given statement "Limited characteristics make it impossible for hash functions to be used to determine whether or not data has changed" is False because hash functions can be used to identify whether data has been altered, and their use is not restricted by limited characteristics.

A hash function is a method for creating a unique fixed-size digital fingerprint for a message of arbitrary length. The output, which is typically a short string of characters or numbers, is referred to as a hash, fingerprint, or message digest. It's worth noting that the hash function's output is always the same size regardless of the input's size. The hash function is used to validate the integrity of the transmitted data.

The hash function can quickly detect any changes made to the original data by recalculating the hash value and comparing it to the initial hash value. Hash functions can be used to detect whether or not data has been altered. It works by comparing the hash value of the original data with the hash value of the new data. If the hash values are the same, the data has not been altered. If the hash values are different, the data has been altered. Hash functions are widely used in computer security to ensure the integrity of data.

Hence, the given statement "Limited characteristics make it impossible for hash functions to be used to determine whether or not data has changed" is False.

Know more about Hash function here:

https://brainly.com/question/13164741

#SPJ11

Big O notation is used to describe the upper bound of the time complexity of an algorithm. It can be used to provide a measure of the worst-case time complexity of the algorithm.

for more such question on algorithm

https://brainly.com/question/13902805

#SPJ11

The given statement "The Transport layer uses port numbers to identify the source and destination Application-layer protocol of the data that it contains is true because in computer networking, port numbers are used to identify certain protocols or services that are part of an application.

It enables the operating system to manage incoming and outgoing connections through the network's internet Protocol (IP) address.

Port numbers are divided into three ranges: well-known ports, registered ports, and dynamic or private ports. These numbers are typically represented as a 16-bit unsigned integer within a TCP or UDP header. TCP and UDP are two common protocols that use port numbers.

For such more question on networking:

https://brainly.com/question/28464891

#SPJ11

Answer:2.5 and '2.5'

Explanation:

A float number is a number that isn't whole, like for example a decimal number, so the only floats I saw were 2.5 and '2.5'

I hope you get a 100%

For an integer x to execute branch 3, the value of x must be equal to 9. This can be seen by examining the given statement "if x < 10 : branch 1 else if x > 9: branch 2 else: branch 3".

The statement is an example of an if-else statement, which is a type of conditional statement used in programming. This statement is read as: "If the condition 'x < 10' is true, execute branch 1; otherwise, if the condition 'x > 9' is true, execute branch 2; if both of these conditions are false, execute branch 3." As the condition 'x > 9' is false if x is equal to 9, branch 3 will execute when x = 9.

To sum up, for an integer x to execute branch 3, the value of x must be equal to 9.

for more such question on integer

https://brainly.com/question/29692224

#SPJ11

Answer:

1. Line 3

def username (strFirst, strLast):

2. Line 2

return strFirst[0] + strLast

3. Line 1

answer = username ('Joann', 'Do')

4. Line 4

print (answer)

Output: JDo

Answer:

you can store data in list , Tuple , map and array

Explanation:

list means in the form:

list = [1,2,3,4,5]

Tuple = (1,2,3,4,5)

map = {1:2, 2:3 , 3:4}

array = [

[1,2,3,4,5]

[6,7,8,9,10]

]

difference

list is used to access the stored data by usinf the index. Tuple consider each elements as a string

map used to store connected data's like age and name of some one and acces it using either of them and areay used to store 2 dimensional data

Answer:

1. Poor Posture: Sitting in the same position for too long can lead to poor posture, which can cause muscle fatigue, back and neck pain, and headaches.

2. Carpal tunnel syndrome: Repetitive motions such as typing on a keyboard can cause carpal tunnel syndrome, a type of nerve damage that can cause pain and numbness in the hands and wrists.

3. Eyestrain: Prolonged use of a computer can cause eyestrain, which can lead to headaches and vision problems.

4. Poor diet: Sitting in front of a computer can lead to snacking, which can lead to a poor diet and health problems.

5. Lack of physical activity: Using a computer all day can lead to lack of physical activity, which can cause health problems such as obesity.

Answer:

Microsoft word: docx or doc

PowerPoint: pptx

Excel: There's a few for Excel, but I believe the default is xlsx

Image: jpg, jpeg, png

ICT refers to the field of information and communication technologies as a whole, while ICTs refer to the individual technologies within that field such as computers, smartphones, and the internet.

What is internet?
The internet is a global network of interconnected computers and servers that communicate with each other using standard communication protocols, allowing people to access and share information and communicate with each other across geographical distances.


ICT stands for Information and Communication Technology, which is a term used to describe the combination of technologies used to manage and communicate information.

ICTs, on the other hand, stands for Information and Communication Technologies, which refers to the specific devices, tools, and technologies used for communication and information management, such as computers, smartphones, the internet, and various software and applications.

In summary, ICT is a broader term that encompasses various technologies used for managing and communicating information, while ICTs are specific technologies that fall under the ICT umbrella.

To know more about software visit:
brainly.com/question/1022352
#SPJ1

Answer:

Explanation:

All of the options listed have a chance to call an IT security risk with business impact.

(a) Infection of computers with a computer virus can lead to the loss of data or system functionality, which can disrupt business operations and result in financial losses.

(b) Putting off antivirus software can increase the risk of malware infections, which can lead to data breaches, theft of sensitive information, and other security incidents.

(c) Sharing a critical business password without proper encryption can compromise the confidentiality and integrity of sensitive data, potentially resulting in data breaches and other security incidents.

Therefore, all of these actions have the potential to cause IT security risks with business impact, and organizations should take appropriate measures to mitigate these risks.

The Answer: B. UPPER

The statement  is true because regarding U.S. GAAP and IFRS when it comes to guarding against overestimating variable consideration is that "Under IFRS, sellers only include an estimate of variable consideration to extent it is "probable".

IFRS requires that estimates of variable consideration be included only when the likelihood of significant reversal of revenue is “probable”, and this is a stricter standard than the “reasonably possible” standard under U.S. GAAP.

Under U.S. GAAP, estimates of variable consideration are only included when the amount of the estimate is both “reasonably possible” and “probable”. Therefore, U.S. GAAP and IFRS do not convey the same likelihood when it comes to the uncertainty associated with the variable consideration.

Under IFRS, the seller must be more certain that there will not be a significant reversal of revenue before including the estimate, while under U.S. GAAP, the seller only needs to be reasonably certain that there is a possibility of a significant reversal.

For more such questions on revenue

https://brainly.com/question/13440727

#SPJ11

Answer:

Explanation:

SEE THE ATTACHED.

The options that are a fast and easy way to gather information about a company are as follows View the company's website, Look for company ads in phone directories. Therefore the correct option is option C and D.

To acquire information about a company, conducting a zone transfer of the company’s DNS server and port scanning aren't the recommended techniques because they’re intrusive and can lead to security risks.

Both the website and the phone directory are easy to access, safe, and are often trustworthy sources of information. To gather the required information, one can quickly check out the company's website, where it is possible to find the required information that one needs, and also look for company ads in phone directories.

These two methods are fast and easy to access. One can also go through the company profile on various social media platforms for getting insights into the company's culture, employee reviews, and reviews from customers. Therefore the correct option is option C and D.

For such more question on directories:

https://brainly.com/question/29486744

#SPJ11

In the Reno TCP, when TCP enters the fast recovery if a new (non-duplicate) ACK arrives, TCP increments the congestion window by 1 segment instead of 1/2 segment.

The Reno TCP was the first modification of TCP that addressed congestion. It replaces the slow start and congestion avoidance algorithms with a more aggressive algorithm that speeds up the recovery process when packet loss is detected in the network. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost. The Reno TCP then changes to fast recovery mode when it detects the third duplicate acknowledgement.

The Reno TCP is an enhancement to the TCP congestion avoidance algorithm that improves its ability to handle congestion in the Internet. It is a variant of TCP that is designed to cope with network congestion by quickly responding to lost packets, rather than relying on the slow, steady approach of TCP's congestion avoidance algorithm. The Reno TCP is able to detect the loss of a packet by the receipt of three duplicate acknowledgments, as it believes that the sender has transmitted a packet that has been lost.

For such  more questions on TCP :

brainly.com/question/29848408

#SPJ11

The given statement "Typically, hybrid drives use SSD to store the operating system and applications and hard disks to store videos, music, and documents." is true because a hybrid drive is a combination of solid-state and hard-disk drives.

It aims to provide faster and more efficient performance in contrast to traditional hard-disk drives. An SSD is the key component of a hybrid drive since it improves the boot time of the operating system and speeds up the launch of applications by using the flash storage.

As a result, users experience much quicker system responsiveness and load times. Hard-disk drives, on the other hand, are used to store media files, such as music and videos, as well as personal documents and archives.

Thus, hybrid drives offer the best of both worlds by combining the speed of SSDs and the storage capacity of traditional hard-disk drives.

For such more question on hard-disk:

https://brainly.com/question/26382243

#SPJ11

The final value of arr will be {-8, -14, 1, 9, 10, 34}, which is closest to option B: {-17, -14, 3, 18, 21, 34}. Therefore, the answer is option B.

The mystery method is dividing the length of the array by 2 and iterating over the array by incrementing i by 2 in each iteration. In each iteration, it's updating the value at index i to be half of its current value.

Starting with the given values of arr: {-17, -14, 3, 9, 21, 34}

In the first iteration, i = 0, and arr[0] will be updated to -8.5, but since it's an integer array, it will be rounded down to -8.

After the first iteration: {-8, -14, 3, 9, 21, 34}

In the second iteration, i = 2, and arr[2] will be updated to 1.5, but since it's an integer array, it will be rounded down to 1.

After the second iteration: {-8, -14, 1, 9, 21, 34}

In the third iteration, i = 4, and arr[4] will be updated to 10.5, but since it's an integer array, it will be rounded down to 10.

After the third iteration: {-8, -14, 1, 9, 10, 34} Option B.

For more such questions on mystery

https://brainly.com/question/30331783

#SPJ11

Polymorphic method that appears throughout Python's system of classes is a true statement.

The str method is an example of such a method in Python.In Python, a method that can be used with multiple types of objects is known as a polymorphic method. Python's polymorphic nature allows it to perform many operations without needing to be explicitly declared for specific data types. Python supports polymorphism via a broad variety of concepts, such as functions, method overloading, and operator overloading.

Str method example:As mentioned earlier, the str method in Python is a good example of a polymorphic method that appears throughout Python's system of classes. The str method is used to convert an object into a string. The str method is known as an instance method since it is called on an instance of a class.Str method definition:This method returns a string representation of the object. If no argument is given, it returns a string representation of the empty object.

For such more questions on str method:

brainly.com/question/29602416

#SPJ11

Answer:
values = []

for i in range(5):

   value = int(input(f"Enter value {i+1}: "))

   values.append(value)

if len(set(values)) < len(values):

   print("DUPLICATES")

else:

   print("ALL UNIQUE")

Explanation:

The program creates an empty list called values, and then uses a for loop to request five integer values from the user using the input() function. The int() function is used to convert the input values to integers, and the append() method is used to add each value to the values list.

After all five values have been entered, the program uses the set() function to create a set of the values. A set is an unordered collection of unique elements, so if there are any duplicate values in the original values list, they will be removed when the set is created. The program then compares the length of the original values list to the length of the set. If the lengths are not equal, it means there were duplicates in the original list, and the program prints "DUPLICATES". Otherwise, the program prints "ALL UNIQUE".

The following statement about changing requirements in software development, is correct: Organizations must adapt to rapidly changing market conditions to stay relevant in business. (Option D)

Software development refers to the process of designing, creating, testing, and maintaining software applications, frameworks, or other software components used by computers or other devices.

The statement "Changes are acceptable till design but once development starts, any further change should be rejected" is incorrect as changes in software requirements can occur at any stage of the software development life cycle.

However, changes made later in the development cycle can be more expensive and time-consuming to implement, and they can introduce additional risks to the project.

The statement "In traditional way of software development, once the requirements are baseline, further changes can be easily accepted with light process" is also not entirely true. Any changes to baselined requirements should be subject to a formal change control process.

Learn more about software development on:

https://brainly.com/question/3188992

#SPJ1

Full Question:

Although part of your question is missing, you might be referring to this full question:


Which of the following statements about changing requirements in software development, are correct?

In traditional way of software development, once the requirements are base lined, further changes should undergo heavy change control process

Changes are acceptable till design but once development starts, any further change should be rejected

In traditional way of software development, once the requirements are base lined, further changes can be easily accepted with light process.

Organizations must adapt to rapidly changing market conditions to stay relevant in business​

The best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. A linear search algorithm is a simple search algorithm that looks for a value within a list by sequentially checking each element of the list until it finds the desired element or reaches the end of the list. In this case, the algorithm would start at the beginning of the studentList.curNodeA, and then check each node until it finds the desired insertion position.


Once the algorithm finds the desired insertion position, it would then insert the new item into the list, either at the beginning, middle, or end. To insert at the beginning, the algorithm would shift all the other elements down and make room for the new item. To insert at the middle, the algorithm would again shift all the other elements down, while making room for the new item. And to insert at the end, the algorithm would simply append the new item onto the end of the list.

To summarize, the best algorithm to use for finding the insertion position of a new item in the linked list studentList.curNodeA = curNodeB is a linear search algorithm. This algorithm can search for the desired insertion position and then insert the new item at the beginning, middle, or end of the list as needed.

for more such questions on algorithm .

https://brainly.com/question/24953880

#SPJ11