Correct name of the compound

Answer:

1) Sound waves are stores as electrical signal in the digital recording.

2) the electrical signal of the digital recording is transcribed and sent to the voice coils.

3) the voice coil changes this electrical signal into varying magnetic fields.

4) The magnetic field pushes and pulls the diaphragm of the speakers.

5) the pushing and pulling of the diaphragm generates sound waves in the speaker.

Answer:

jeez thats some calculus stuff right there im pretty sure its b

Explanation:

Answer:

2.078x10^24

Explanation:

No. of atoms of chlorine = 3.45 x 6.022x 10 ^23 x 1

= 2.078x10^24

( to find no. of atoms of, heres the formula i was taught No. of atoms = no. of moles x Avogadros constant x no. of atoms in the formula of compound)

Answer: Volume =  50.0 mL in liters : 50.0 / 1000 = 0.05 L

n = M x V

n = 0.20 x 0.05

n = 0.01 moles of solute

Explanation:

The number of moles of solute are present in 50.0 mL of 0.20 M of KNO₃ solution is 0.01 moles.

Moles will be calculated by using the molarity formula because molarity is define as the no. of moles of solute present in per liter of the solution as:

M = n/V, where

M = molarity of KNO₃ = 0.2 M

V = volume of solution = 50mL = 0.05L

Moles will be calculated as:

n = (0.2)(0.05) = 0.01 moles

Hence required moles are 0.01 moles.

To know more about molarity, visit the below link:
https://brainly.com/question/26528084

Answer:

kii

Explanation:

Answer:

B the density stays the same

Answer: 16700 Joules

Explanation:

The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.

[tex]Q=m\times c\times \Delta T[/tex]

Q = Heat absorbed = ?

m = mass of sand = 2 kg

c = heat capacity = [tex]835J/kg^0C[/tex]

Initial temperature  = [tex]T_i[/tex] = [tex]40^0C[/tex]

Final temperature= [tex]T_f[/tex]  = [tex]50^0C[/tex]

Change in temperature ,[tex]\Delta T=T_f-T_i=(50-40)^0C=10^0C[/tex]

Putting in the values, we get:

[tex]Q=2kg\times 835J/kg^0C\times 10^0C[/tex]

[tex]Q=16700J[/tex]

16700 J of energy must be added to a 2-kilogram pile of it to increase its temperature from 40°C to 50°C

Answer:

4.92 L

Explanation:

Rearrange ideal gas law and solve.

Change C to K.

- Hope that helps! Please let me know if you need further explanation.

Answer:

Gamma Rays.

Explanation:

Gamma-ray photons have the highest energy in the EMR spectrum and their waves have the shortest wavelength.

Answer: The reaction of one mole of oxygen [tex](O_2)[/tex] releases 445 kJ of energy.

Explanation:

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.

Endothermic reactions are defined as the reactions in which energy of the product is greater than the energy of the reactants. The total energy is absorbed in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be positive.

[tex]CH_4(g)+2O_2(g)\rightarrow CO_2(g)+2H_2O(l)[/tex]  [tex]\Delta H=-890kJ[/tex]

on halving the reaction, enthalpy also becomes half

[tex]\frac{1}{2}CH_4(g)+O_2(g)\rightarrow \frac{1}{2}CO_2(g)+H_2O(l)[/tex]  [tex]\Delta H=-445kJ[/tex]

Thus The reaction of one mole of oxygen [tex](O_2)[/tex] releases 445 kJ of energy.

Answer:

55×10^-26 J

Explanation:

We can calculate the energy of the wave from

E= hc/λ

Where

h= Planks constant = 6.6×10^-34 Is

c= speed of light = 3×10^8 ms-1

λ= wavelength of the wave = 0.36 metres

Recall that cell phone use radio waves which belong to the electromagnetic spectrum hence it must possess the speed of light.

E= 6.6×10^-34 × 3×10^8/ 0.36

E= 55×10^-26 J

Hence the energy possessed by 0.36 meters wavelength radio waves is 55×10^-26 J

Answer:

A continuous spectrum is a record formed by collecting light of all frequencies traveling through space together. ... A line spectrum is a record formed by collecting light emitted from excited atoms whose electrons are falling back down to lower energy states.

Explanation:

Answer:

0.03

Explanation:

22.8 g Ba(OH)2 (1 mol Ba (OH)2/ 171.34 g) = 0.133 mol Ba (OH)2

77.2 g H2O (1 mol H2O/18 g) = 4.29 mol H2O

X= molar fraction= mol Ba(OH)2/ mol total

X= 0.133/ (0.133+4.29) = 0.03

0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.

The ratio of the number of moles of one component of a solution or other mixture to the total number of moles representing all of the components.

Moles of [tex]Ba(OH)_2[/tex]

Moles = [tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{22.8 g Ba(OH)_2}{171.34 g}[/tex]

= 0.133 mol [tex]Ba (OH)_2[/tex]

Moles of [tex]H_2O[/tex]

[tex]Moles = \frac{mass}{molar \;mass}[/tex]

[tex]Moles = \frac{77.2 g H_2O}{18 g}[/tex]

= 4.29 mol [tex]H_2O[/tex]

The mole fraction of [tex]Ba(OH)_2[/tex]

[tex]\frac{mol Ba(OH)_2}{total \;mol}[/tex]

= 0.03

0.03 is the mole fraction of [tex]Ba(OH)_2[/tex] in an aqueous solution that contains 22.8% [tex]Ba(OH)_2[/tex] by mass.

Learn more about the mole fraction here:

https://brainly.com/question/8076655

#SPJ2

Answer:

Sodium is in group 1 so it has 1 valence electron (one electron in its outer shell). Sodium will be looking to lose its one valence electron in order to become more stable. Chlorine is in group 17 so it has 7 valence electrons, and therefore only needs to gain one valence electron to attain noble gas electron configuration (become stable with 8 valence electrons, just like the noble gases in group 18 have 8). Because the chlorine atom is trying to gain one electron, and the sodium atom is trying to lose one, sodium will give up its one valence electron to chlorine and the two atoms will form an ionic bond. Because chlorine is looking to gain just one electron and sodium is looking to lose the same number, the ratio of chlorine atoms to sodium atoms will be 1:1, one chlorine atom per one sodium atom.

Explanation:

Answer:

answer: A. all of the living organisms in a specific place at a specific time

Explanation:

Answer: C

# The main reason why the reaction above can not be balanced is:

   This chemical reaction SO2 + H2O -> H2SO2 is not correctly written.

    It must be: SO2 + H2O -> H2SO3

Explanation:

Note 1:

H2SO2 can be produced by the other chemical reaction:

2H2O + SCl2 -> 2HCl + H2SO2

....

Note 2: Answer A is false

As you can see in the reaction  SO2 + H2O -> H2SO3, the oxygen atoms are in two molecules on one side, but one in the other - However, this reaction is written correctly.

Note 3: Answer D is false

Of course the Sulfur atom must be placed in different places: in reactant and product molecules.

Note 4: Answer B is false

There are different kinds of chemical reactions, and this is normal that there are more molecules on one side than on the other.

The answer is C

The correct way to balance the reaction, would be to write it as SO2 + H2O →  H2SO3

Answer A is incorrect.

The oxygen atoms in the reaction SO2 + H2O -> H2SO3 are in two compounds on one end but on the other, it is in just one.

Answer D is wrong.

The sulfur atom has to be in the reactants and the products.

Answer B is not correct.

There are many types of chemical reactions . One side commonly has more atoms than the other.

Answer:

True!

Explanation:

Fossil fuels are carbon based compounds present deep in the earth left millions of years ago.

hope it helps!

Answer:

hydrogen

Explanation:

sound energy, kinetic energy,

i cant think of any more but hope this helps

Answer:

Mechanical to kinetic to sound to heat

Explanation:

Remember that all types of energy transformation end in heat

Answer:

Dark matter also called baronic matter is the matter that makes up 27% of the universe.

In 1933 it was determined as that mass that cannot be seen, that is, the non-visible mass of outer space.

Dark matter also plays a central role in the formation of structures and the evolution of galaxies and has measurable effects on the anisotropy of cosmic microwave background radiation. The composition of this matter is unknown today.

The dark matter component has considerably more mass than the "visible" component of the Universe.

Explanation:

There are certain researchers who say that the appearance of dark matter was before the appearance of the big bang.

A relevant fact of this matter is that dark matter exerts gravity, and that gravity affects the movements of objects.

Despite the fact that nothing is known about its origin, astronomers have amply demonstrated that dark matter plays a determining role in the formation of galaxies and galactic clusters, which could not maintain their cohesion without its existence, but many doubt that it is the remainder / remnant or product of a big bang.

Proper lane placement can include positioning your car 36 inches from the right or left line. Therefore, option B is correct.

Using different lane positions to make adjustments for potential problems and create larger space between car and problem situations. Lane position is the placement of car in the center, on the right, or on the left of a lane.  The width of a lane is twelve feet on most highways or streets.

There are three main positions are lane position 1 is center of lane, lane position 2 is left side, and lane position 3 is right side. Position 2 is left side of lane is for car.

Position 3 is a vehicle placement to the right when a restriction to path of travel or your line of sight occurs. Proper lane placement can include positioning your car 36 inches from the right or left line.

Thus, option B is correct.

To learn more about lane positioning, follow the link;

https://brainly.com/question/11661954

#SPJ2

Answer:

2.888mm needs for the reaction

Answer:

unbalanced

Explanation:

Cl and H have an extra atom

- Hope that helps! Please let me know if you need further explanation.

Answer:

b

Explanation:

Answer:

V = 513.36m/s

Explanation:

Temperature (T) = 25°C = (25 + 273.15) = 298.15K

Speed (V) = 1.92*10³m/s

According to kinetic theory of gases, the speed (v) of a molecule is

V= √(3RT / M)

V = speed or velocity

R = ideal gas constant = 0.082J/mol.K

T = temperature of the gas

M = molar mass

Molar mass of hydrogen molecule = 2.0g/mol

Molar mass of Nitrogen molecule = (2×14.0) = 28.0g/mol

Since they're in the same temperature

V1 / V2 = √(M2 / M1)

1.92×10³ / V2 = √(28 / 2)

1.92×10³ / V2 = √(14)

1.92*10³ / V2 = 3.74

1.92*10³ = 3.74V2

V2 = 1920 / 3.74

V2 = 513.36m/s

The velocity of Nitrogen molecule is 513.36m/s

Answer:

Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)

Explanation:

Given:

Mass of copper (M) = 45 gram

Change in temperature (ΔT) = 71°C - 12°C = 59°C

Specific heat (c) =0.75 j /g*c

Find:

Heat energy (Q) = ?

Computation:

Heat energy (Q) = Mass(M) × Change in temperature (ΔT) × Specific heat (c)

Heat energy (Q) = 45 gram × 59°C × 0.75 j /g*c

Heat energy (Q) = 1991.25 J

Heat energy (Q) = 1.9925 KJ = 2 KJ (Approx)

Answer:

Evaporation

Explanation:

Evaporation turns liquid water into a gas called water vapor. If heat is taken away from water vapor, it condenses. Condensation turns water vapor into a liquid. If heat is taken away from liquid water, it freezes to become ice.

Answer:

D

Explanation: