Using the table for electrode potential differences (Figure 2) identify the possible composition of the screws responsible for the corrosion observed in the contact area with the copper wire.
In which highlighted section of the periodic table in the diagram provided above are the elements whose atoms have 1 valence electron located?
A) a
B) b
C) c
D) d
Answer:
B.
Explanation:
Explaining Radioactive Decay
Explain the process of radioactive decay. What happens during radioactive decay, and what is the result at the end of radioactive decay?
Answer:
Radioactive decay is the process in which the nucleus of an unstable isotope spontaneously changes, releasing particles and energy. An unstable isotope will continue to decay until it reaches the stable form of either a different isotope of the same element that is stable or a different element that is stable.
Explanation:
Answer:
Sample Response: Radioactive decay is the process in which the nucleus of an unstable isotope spontaneously changes, releasing particles and energy. An unstable isotope will continue to decay until it reaches the stable form of either a different isotope of the same element that is stable or a different element that is stable.
If you want to make your own make sure to include.
- Radioactive decay is the process in which the nucleus of an unstable isotope spontaneously changes, releasing particles and energy.
- An unstable isotope will continue to decay until it reaches a stable form.
- The stable form could be a different isotope of the same element that is stable or a different element that is stable.
Explanation:
Edge 2021
The sun is located in the center of our solar system. Where is the sun located in our disc-shaped
galaxy?
*Answer:-*
The sun is about 1/3 the distance from the center of the Milky Way galaxy to its outer edges. It's located in a smaller spiral arm, between two large arms, called the Orion Arm.
HELP!!! DUE TONIGHT!!
10 PTS!!
the answers are given already but my teacher wants me to show work...pls help!!!
Answer:
K I will attempt
Explanation:
a)
[tex]O_2_{(g)}+ 2H_2_{(g)} => 2H_2O_{(l)}\\[/tex]
b)
1 : 2 : 2 (I don't know if this is what the question wants but it is what I would answer)
c)
Hydrogen because it requires 2 moles of H2 to react with 1 mole of O2
d)
24 moles of water. Look at stoichiometric coefficient. 2:2 means 24 moles you get 24 moles
e)
Oxygen. 2 < 5/2. Remember, 1 mole of O2 requires 2 moles of H2. But 5/2 is still greater than 2
f)
First, let's find out how many moles of water we can get. Since O2 is the limiting reactant, and O2:H2O ratio is 1:2, we will get 4 moles of H2O. Then, we can multiply 4 by Avogadro's number which is [tex]6.022*10^{23}[/tex] to get the number of molecules. We get: 2.41 * 10^24 molecules of water.
Answer:
I'ma just take the point thank you very much
what are all the populations of different species that live in the same area at the same time
Answer:
The answer is Community
Explanation:
What needs to be known about an object in order to determine its kinetic energy.
P.S Please help I need to answer this question for my pendulum experiment.
Answer:
we need to know it's
mass and velocity
Explanation:
then use the formula of kinetic energy
Answer:
Mass and velocity (or motion).
Explanation:
KE=(1/2)mv^2.
The kinetic energy of an object is the amount of work (expended energy) that's required to move (or more accurately, to accelerate) the object to a specific velocity. So, if you know the mass of the object, and you know it's current velocity, you can determine it's kinetic energy with the formula above.
I need help really bad with this!!!
For the following:
Highlight each subscript in RED.
Highlight each coefficient in BLUE.
H2O 5Cl2 2Mg 3H2O2
For the following
List the chemical symbols of each element.
Give the number of atoms of each element.
HCl CO2 Na2SO4
Balance the following chemical equations.
1. Cu2O + C → Cu + CO2
2. H2O2 → H2O + O2
Al + Fe3N2 → AlN + Fe
4. Ag2S → Ag + S8
5. ZnS + AlP → Zn3P2 + Al2S3
6. Fe(OH)3 → Fe2O3 + H2O
Given the two chemical equations, highlight in RED the one that is balanced.
7. a. 2Na + Cl2 → 2NaCl
b. 2Na + 2Cl2 → 2NaCl
8. a. C3H8 + 5O2 → 3CO2 + 4H2O b. 2C3H8 + 5O2 → 3CO2 + 8H2O
9. a. 2NH3 + 5O2 → 2NO + 3H2O b. 4NH3 + 5O2 → 4NO + 6H2O
10. a. Y(NO3)2 + GaPO4 → YPO4 + Ga(NO3)2
b. 2Y(NO3)2 + 2GaPO4 → 2YPO4 + Ga(NO3)2
Answer:
Did u get the answers
Explanation:
How would you describe the appearance of homogeneous mixture? A. Homogeneous mixtures do not have a uniform composition. B. Homogeneous mixtures have a uniform appearance. C. Homogeneous mixtures are not distributed evenly. D. Homogeneous mixtures have two phases
Answer:
i think its c somebody correct me if im wrong. but hope this help
Explanation:
Josie draws models of the particles within a substance. Which model best represents the particles in
a solid?
D
A
B
C
Please select the word from the list that best fits the definition.
Science lab, bring water and sodium
a) term calendar
b) weekly schedule
c) daily organizer
Answer:
C. Daily Organizer. Also called an agenda. We usually write notes in them for school related things so the answer is pretty self explanatory.
Air has
A. a definite volume but not a definite shape
B. a definite shape but not a definite volume.
C. no definite volume or shape.
D. both a definite shape and a definite volume.
Answer would be neither!
The reason being that it can take the shape and volume of anything.
Answer:
Neither
Explanation:
11. Which elements are least likely to react with other elements? A) metals C) nonmetals B) noble gases D) transition elements
Answer:
I believe the answer is B. Noble gases.
Explanation:
their outer shell is already full of electrons which makes then less reactive.
The creation of carbon monoxide is an effect. What is one cause?
A. the regrouping of the atoms in table salt
B.the burning of fossil fuels
C.cleaning swimming pools
D.operating a stove
Answer:
Your answer is going to be B. the burning of fossil fuels
Explanation:
This is because carbon monoxide is extremely toxic for us humans. An example of this could be pollution. Hope this helps! :)
Explain how to identify a starting position on a line.
Displacement is defined as the distance, in any direction, of an object relative to the position of another object. Physicists use the concept of a position vector as a graphical tool to visualize displacements. A position vector expresses the positionof an object from the origin of a coordinate system
Answer:
Pick a reference point on the line to be the zero position. Determine the direction and measure the distance from zero in standard units.
Explanation:
PLZ HELP!
How do you think changing the angle of a ramp will affect work done?
Answer: The steepness of a ramp affects it by making it easier or harder.
Explanation: It's a bit situational. If you were going up a steep ramp with a heavy load, it will increase the work necessary, whereas if you were going down a ramp, it would decrease the work necessary. If you need this simply put, think about biking up and down a hill. It would be easier going down than up.
Write one paragraph to summarize Strengths and Weaknesses of Acids and Bases.
Answer:
Explanation: I can't give you the answer you with the sentence but i will help you the best i can
One qualitative measure of the strength of an acid or a base solution is the pH scale A logarithmic scale that relates the concentration of the hydrogen ion in solution.
If the actual yield of sodium chloride from the reaction of
8.3 g of sodium and 4.5 g of chlorine is 6.4 g, what is the percent yield?
Answer:
86%
Explanation:
Calculate the theoretical yield from the mass of each reactant. The lesser amount is the theoretical yield. Then use the following formula to calculate the percent yield: % yield = actual yield/theoretical yield X 100.
2KClO3 → 2KCl + 3O2
How many moles of KClO3would it take to make 6.0 moles of O2?
a) 1.5
b) 9.0
c) 2.0
d) 4.0
God is GOOD AND arr you sure that is written properly
Define Mole Concept give 3 Significance of Mole concept
Answer:
The mole is important because it allows chemist to work with a subatomic world with macro world units and amount. Atoms molecules and formula units are very small and very difficult to work with usually. However the mole allows a chemist to work with amount large enough to use.
In the International System of Units, the mole is the unit of substance quantity. How many elementary entities of a certain substance are present in an item or sample is determined by the quantity of that material.
Three significance of Mole concept are:
1) Since atoms and molecules are so tiny, we can count them using the mole idea by weighing extremely little quantities of material.
2) It sets a benchmark for figuring out the stoichiometry of reactions.
(3) It explains the characteristics of gases.
The mole is specified as exactly 6.02214076×10²³ elementary entities.
Learn more about mole, here:
https://brainly.com/question/22540912
#SPJ2
Matter that is made up of only one kind of Atom
Answer:
elements
Matter that has only one kind of atom is called an element. Gold, copper, oxygen, and mercury are examples of elements. Most matter is made up of two or more different kinds of atoms that are chemically combined. This kind of matter is called a compound.
Explanation:
Answer:
Element
Explanation:
This is the answer because:
1) All matter is made up of substances called elements.
2) Matter that iis made up of only one kind of Atom is called an Element.
Hope this helps! :D
An object has a mass of 26.94 grams and a volume of 2.568 cubic centimeters. What material is it likely to be
made of?
Substance iron gold silver copper
Density (g/cm) 7.874 19.32 10.49 8.92
a. Silver
c. Iron
b. Gold
d. Copper
Answer:
a) silver
Explanation:
Given data:
Mass of object = 26.94 g
Volume of object = 2.568 cm³
Which subject is this = ?
Solution:
Formula:
d = m/v
by putting values
d = 26.94 g/ 2.568 cm³
d = 10.49 g/cm³
Densities of objects: g/cm³
iron = 7.874
gold = 19.32
silver = 10.49
copper = 8.92
Thus, given object is silver.
Which safety procedure could prevent an accident?
using a fire extinguisher
using glass without chips or cracks
smelling a mixture of chemicals
getting a bandage out of the first aid kit when bleeding
Answer:
B
Explanation:
"You learned about mixtures, especially solutions and the factors that affect their makeup and properties. Why is it important to know the properties of both solutes and solvents when preparing a solution that is expected to meet a certain need?
Does this involve a chemical change or a physical change? Explain."
Can u pls help me
Answer:
its due to the solvents being factored. to be prepared for the solution you would need a chemical change as the solvents get factored so this will mean that it will have a chemical reaction. in this case its slightly different so it will be called a chemical change as 2 different chemicals change and evolve.
Explanation:
Compare and contrast atoms and molecules. Cite specific examples from the readings, as well as what you may already know, to support your comparison.
Answer:
The main difference between an atom and a molecule lies in the size: while the atom is the smallest unit into which matter can be divided into any of its states, a molecule is the union of a group of atoms, that is, this composed of several atoms. Thus, for example, a water molecule is composed of two hydrogen atoms and one oxygen atom (H2O). Therefore, it can be said that atoms are the smallest unit in which the chemical elements of the world can be divided, while molecules are the particles of matter that are formed through the combination of these elements.
If X is the symbol of an element, which pair correctly represents isotopes of X
Answer:
What pair???
Explanation:
Answer:
C is the pair that represent the isotopes of x
If a sample of nitroglycerin containing 2 mL (density = 1.592g/mL) is detonated, how many total moles of gas are produced? If each mole of gas occupies 55L under the conditions of the explosion, how many liters of gas are produced? How many grams of nitrogen gas are specifically produced?
Total moles of gas = 0.1225
Volume of gas produced : 6.7375 L
mass of Nitrogen : 0.588 g
Further explanationGiven
2 ml of Nitroglycerin(ρ=1.592 g/ml)
Required
Total moles of gas
Solution
Nitroglycerin detonated ⇒ decomposition reaction
4C₃H₅N₃O₉(s)⇒ 6N₂(g)+12CO(g)+10H₂O(g)+7O₂(g)
mass of Nitroglycerin :
[tex]\tt mass=2~ml\times 1.592~g/ml=3.184~g[/tex]
moles of Nitroglycerin :
[tex]\tt moles=\dfrac{3.184}{227,0865~g/mol}=0.014[/tex]
Total moles of gas:
[tex]\tt \dfrac{6+12+10+7}{4}\times 0.014=0.1225[/tex]
Volume of gas produced :
[tex]\tt 0.1225\times 55=6.7375~L[/tex]
moles of Nitrogen :
[tex]\tt \dfrac{6}{4}\times 0.014=0.021[/tex]
mass of Nitrogen :
[tex]\tt 0.021\times 28=0.588~g[/tex]
pls helpppp
Is the law of conservation of mass observed in each equation?
1. 2KClO3=2KCl+3O2
2. CaCO3+2HCl=CaCl2+H2O+CO2
Answer:
its c my guy
Explanation:
I don't really understand this worksheet question.
Structural formula of 2 ethyl, 4 methyl-Heptane
