¿Cuánto se demora el sonido en recorrer 3 metros de un cable de cobre, si su rapidez en él es de 3810 m/s

Answer:

B illustrates refraction

Answer:

77.625 cm

Explanation:

The given distance of the image behind the convex mirror, v = 11.5 cm

The focal length of the mirror, f = 13.5 cm

The mirror formula for convex mirror is given as follows;

[tex]\dfrac{1}{u} - \dfrac{1}{v} = -\dfrac{1}{f}[/tex]

Where;

u = The distance from the statue to the mirror

Therefore, we get;

[tex]\dfrac{1}{u} = -\dfrac{1}{f} + \dfrac{1}{v}[/tex]

Plugging in the values gives;

[tex]\dfrac{1}{u} = -\dfrac{1}{13.5} + \dfrac{1}{11.5} = \dfrac{8}{621}[/tex]

∴ The distance from the statue to the mirror, u = 621/8 cm = 77.625 cm.

Answer:

i. Work done by the gas as it expands is approximately 1,900 J

ii. The total heat supplied is approximately 4, 576 J

iii. The change in internal energy is approximately 2,772 J

Explanation:

The constant pressure of the helium gas, P = 1.0 × 10⁵ Pa

The initial and final pressure of the gas, T₁, and T₂ = 2°C (275.15 K) and 112°C (385.15 K) respectively

The number of moles of helium in the sample of helium gas, n = 2 moles

The volume occupied by the gas at state 1, V₁ = 45 L

i. By ideal gas law, we have;

P·V = n·R·T

Therefore;

[tex]V = \dfrac{n \cdot R \cdot T}{P}[/tex]

Plugging in the values gives;

[tex]V_2 = \dfrac{n \cdot R \cdot T_2}{P}[/tex]

Where;

V₂ = The volume of the gas at state 2

Therefore;

[tex]V_2 = \dfrac{2 \cdot 8.314 \cdot 385.15}{1.0 \times 10^5} \approx 0.064[/tex]

The volume of the gas at state 2, V₂ ≈ 0.064 m³ = 64 Liters

Work done by the gas as it expands, W = P × (V₂ - V₁)

∴ W ≈ 1.0 × 10⁵ Pa × (64 L - 45 L) = 1,900 J

Work done by the gas as it expands, W ≈ 1,900 J

ii. The total heat supplied, Q = Cp·n·ΔT

∴ Q = 20.8 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 4,576 J

The total heat supplied, Q = 4, 576 J

iii. The change in internal energy, ΔU = Cv·n·ΔT

∴ ΔU = 12.6 J/(mol·K) × 2 moles × (385.15 K - 275.15 K) = 2,772 J

The change in internal energy, ΔU = 2,772 J

Complete Question

A light spring with force constant 3.05 N/m is compressed by 7.80 cm as it is held between a 0.400-kg block on the left and a 0.800-kg block on the right, both resting on a horizontal surface. The spring exerts a force on each block, tending to push the blocks apart. The blocks are simultaneously released from rest. Find the acceleration with which each block starts to move, given that the coefficient of kinetic friction between each block and the surface is 0, 0.035, and 0.397. (Let the coordinate system be positive to the right and negative to the left. Indicate the direction with the sign of your answer. Assume that the coefficient of static friction is the same as the coefficient of kinetic friction. If the block does not move, enter 0.)

(a) u = 0 heavier block m/s2 m/s2 lighter block

(b)M = 0.035 heavier block m/s2 m/s2 lighter block

Answer:

a)  [tex]A_h=0.297[/tex]

   [tex]A_l=-0.59475[/tex]

b)  [tex]a=0[/tex]

    [tex]a=-0.25175m/s^2[/tex]

Explanation:

From the question we are told that:

Force constant [tex]k=3.05N/m[/tex]

Compression Length [tex]l_c=7.80cm=0.07m[/tex]

Left Mass [tex]M_l=0.400kg[/tex]

Right Mass [tex]M_r=0.800kg[/tex]

Coefficient of kinetic friction [tex]\mu=0, 0.035, and\ 0.397.[/tex]

Therefore

Spring force is given as

 [tex]F_s=Kx[/tex]

 [tex]F_s=3.05*0.070[/tex]

 [tex]F_s=0.238N[/tex]

Generally the equation for Acceleration is mathematically given by

 [tex]A=\frac{F}{m}[/tex]

For Heavier block

 [tex]A_h=\frac{F_s}{m_r}[/tex]

 [tex]A_h=\frac{0.238N}{0.8}[/tex]

 [tex]A_h=0.297[/tex]

For Lighter blocks

 [tex]A_l=\frac{F_s}{m_r}[/tex]

 [tex]A_l=\frac{-0.238N}{0.4}[/tex]

 [tex]A_l=-0.59475[/tex]

b)

Generally the equation for Force is mathematically given by

[tex]F_s-F=ma[/tex]

For Heavier block

[tex]F>Fs[/tex]

Therefore

[tex]a=0[/tex]

For Lighter blocks

[tex]F-F_s=ma[/tex]

[tex](0.035)(0.4)(9.8)-(0.2379)=(0.4)a[/tex]

[tex]a=-0.25175m/s^2[/tex]

Answer:

Explanation:

Use the kinematic equation.

This equation can be derived from [tex]f=ma[/tex], but we can just memorize, or look them up when needed as it saves us time.

Now we can plug our measurements into each variable to solve for acceleration.

Subtract 8m/s from both sides.

Divide by 5 seconds. Left with acceleration in terms of [tex]\frac{m}{s^2}[/tex]

Answer: If we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Explanation:

A temperature at which the the liquid and gaseous phase of a substance of a substance are present in equilibrium with each other is called boiling point.

For example, the boiling point of butane is -1.5 degree Celsius.

This means that at a temperature above -1.5 degree Celsius, butane will exist is gaseous state. That is, at a temperature of 24 degree Celsius butane will evaporate.

Thus, we can conclude that if we leave liquid butane in a bowl on a table in a room where the temperature is [tex]24^{o}C[/tex], butane will evaporate.

Answer:

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Explanation:

Asumiendo que la varilla de cobre experimenta deformaciones muy pequeñas y que las deformaciones no longitudinales son despreciables con respecto a las deformaciones longitudinales, la deformación longitudinal de la varilla se estima mediante la siguiente fórmula:

[tex]l_{f} = l_{o}\cdot [1+\alpha \cdot (T_{f}-T_{o})][/tex] (1)

Donde:

[tex]l_{o}[/tex] - Longitud inicial de la varilla, en metros.

[tex]\alpha[/tex] - Coeficiente de dilatación, en [tex]^{\circ}C^{-1}[/tex].

[tex]T_{o}[/tex] - Temperatura inicial de la varilla, en grados Celsius.

[tex]T_{f}[/tex] - Temperatura final de la varilla, en grados Celsius.

Si sabemos que [tex]l_{o} = 1.20\,m[/tex], [tex]\alpha = 1.4\times 10^{-5}\,^{\circ}C^{-1}[/tex], [tex]T_{o} = 18\,^{\circ}C[/tex] y [tex]T_{f} = 100\,^{\circ}C[/tex], entonces la longitud final de la varilla es:

[tex]l_{f} = (1.20\,m)\cdot \left[1 + \left(1.4\times 10^{-5}\,^{\circ}C^{-1}\right)\cdot (100\,^{\circ}C-18\,^{\circ}C)\right][/tex]

[tex]l_{f} = 1.201\,m[/tex]

La longitud de la varilla de cobre es de 1.201 metros a una temperatura de 100 °C.

Answer:

ΔP = 1875 Pa,   P₂ = P₁ - 1875

Explanation:

Let's use Bernoulli's equation, with the subscript 1 for the widest Mars and the subscript 2 for the narrowest part, suppose that the pipe is horizontal

          P₁ + ½ ρ v₁² + ρ g y₁ = P₂ + ½ ρ v₂² + ρ g y₂

          P₁ -P₂ = ½ ρ (v₂² - v₁²)

suppose the fluid is water

          P₁ - P₂ = ½ 1000 (2² - 0.5²)

         ΔP = 1875 Pa

this is the pressure difference between the two sections

the pressure in the narrowest section is

           P₂ = P₁ - 1875

Answer:

The diagram assigned B

explanation:

Check the direction of the two vectors, their resultant must be in the same direction.

At the ball's highest point, it has no vertical velocity, so the 6 m/s is purely horizontal. A projectile's horizontal velocity does not change, which means the ball was initially thrown with speed v such that

v cos(53°) = 6 m/s   ==>   v = (6 m/s) sec(53°) ≈ 9.97 m/s

The player shoots the ball from a height of 2.0 m, so that the ball's horizontal and vertical positions, respectively x and y, at time t are

x = (9.97 m/s) cos(53°) t = (6 m/s) t

y = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

Find the times t for which the ball reaches a height of 3.00 m:

3.00 m = 2.0 m + (9.97 m/s) sin(53°) t - 1/2 gt ²

==>   t ≈ 0.137 s   or   t ≈ 1.49 s

The second time is the one we care about, because it's the one for which the ball would be falling into the basket.

Now find the distance x traveled by the ball after this time:

x = (6 m/s) (1.49 s) ≈ 8.93 m

B. Watts

Then j/s is the rate of transferring energy or doing work. Its unit is the Watt, equivalent to 1 Joule per second.

The gravitational force between 2 bodys decreases with distance between the two bodies.

f=G m1m2/r2

Answer:

Answer:

D

Explanation:

a weak base is the answer

Answer:

weak base because its near to 7 (neutral) and above 7 is base

Answer:

[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]

Explanation:

Given the following data;

Frequency = 4.0 x 10⁹ Hz

Planck's constant, h = 6.626 x 10-34 J·s.

To find the energy of the electromagnetic wave;

Mathematically, the energy of an electromagnetic wave is given by the formula;

E = hf

Where;

E is the energy possessed by a wave.

h represents Planck's constant.

f is the frequency of a wave.

Substituting the values into the formula, we have;

[tex] Energy, \; E = 4.0 x 10^{9} * 6.626 x 10^{-34} [/tex]

[tex] Energy, \; E = 2.6504 * 10^{-34} \; Joules [/tex]

Answer:

a. X: Slower in gases than liquids Y: Faster in solids than gases Z: Velocity depends on medium.

Explanation:

Speed of sound is fastest in solids. Sound waves travel more quickly in solid, than of liquid and gases. Sound waves travel most slowest in gases. Speed of sound varies significantly and it depends upon medium it is travelling through.  In more rigid medium sounds velocity will be faster.

Answer:

f=ma.......m=f/a......m=20kg

Answer:  

GIVEN:

v₀=0ms⁻¹

a= 8.1ms⁻²

t= 19.4s

REQUIRE:

d=?

CALCULATUION:

as we know,

d=v₀t+1/2at²

by putting values

d=0ms⁻¹×19.4s+1/2×8.1ms⁻²×(19.4s)²

d=0m+1/2×8.1ms⁻²×376.36s²

d=1/2×3048.516m

d=1524.258m

d≈1524m

I hope this helps you ^-^

Answer:

-4500 N

Source: Brainly

The police officer must be angry 0_0

The solubility of the sample will decrease

Answer:

This may refer to a situation like:

"one person pushes a box, if there is equal and opposite reaction why the box moves and the person does not?"

Remember the second Newton's law:

F = m*a

suppose that the mass of the person is 3 times the mass of the box.

So, if the box has a mass M, the person will have a mass 3*M

Then the Newton's equation for the box when the person pushes with a force F is:

F = M*a

solving for the acceleration, we get:

F/M = a

While the person is also pushed by the box with a force with the same magnitude, then the equation for the person is:

F = (3*M)*a'

Solving for the acceleration, we get:

F/(3M) = a'

Now we can compare the acceleration of the box (F/M) with the acceleration of the person (F/3M).

Is easy to see that the acceleration of the box is 3 times the acceleration of the person.

So regardless of the fact that both the box and the person experience a force with the same magnitude, the box will move more due to this force.

This is why in situations like this, the forces do not seem balanced.

They are shifted toward the red end of the spectrum.

Answer:

A meteorologist is a scientist that studies and examines Earth's atmosphere and its interactions with Earth's oceans, land, and biosphere.

Explanation:

Meteorologists use math and science to understand and predict changes in weather and climate.

Answer:

2000g

Explanation:

volume=mass/density

=2000/2.5

=800cm³

mass=density×volume

=800×2.5

=2000g

Answer:

see the explanation below

Explanation:

Momentum is a product of the mass of a particle and its velocity.

and also, momentum is a vector quantity; i.e. it has both magnitude and direction.

Now a plane in the air has both magnitude and velocity

When the plane lands the velocity will amount to zero although the mass is still very much intact

Now the mass* zero velocity= zero

Hence when a plane lands the momentum is zero

Answer:

Explanation:

Acceleration is equal to the change in velocity over the change in time, or

[tex]a=\frac{v_f-v_i}{t}[/tex] where the change in velocity is final velocity minus initial velocity. Filling in:

[tex]3.0=\frac{v_f-(-3.0)}{6.0}[/tex] Note that I made the backward velocity negative so the forward velocity in our answer will be positive.

Simplifying that gives us:

[tex]3.0=\frac{v_f+3.0}{6.0}[/tex] and then isolating the final velocity, our unknown:

3.0(6.0) = v + 3.0 and

3.0(6.0) - 3.0 = v and

18 - 3.0 = v so

15 m/s = v and because this answer is positive, that means that the car is no longer rolling backwards (which was negative) but is now moving forward.

Answer:

I think it's option D

Explanation:

I think it's option D but not so sure

Answer:

Densities increase down the group

MP and BP decrease down the group

Softness increased going down the group

Speed of reacting increases going down the group