Answer:
$10,950 Unfavorable
Explanation:
For computation of flexible budget variance for total costs first we need to find out the standard cost which is shown below:-
Standard cost = (Sold connectors × budgeted variable costs) + Fixed costs per month
= (77 × $150) + $5,500
= $11,550 + $5,500
= $17,050
Flexible budget variance for total costs = Actual cost - Standard cost
= $28,000 - $17,050
= $10,950 Unfavorable
Your bagel shop uses both capital and labor in the production of bagels. In this production process capital and labor are substitutes. If you install a new oven and the marginal product of capital increases, you will:
a. reduce the number of workers you employ
b. increase the number of workers you employ
c. reduce the amount of capital you are using not make any changes since you are already maximizing profit
Answer:
The answer is option A) reduce the number of workers you employ
Explanation:
Installing a new oven is capital intensive. So, for a business person to incur an additional capital cost to aid the efficiency of production, something has to give.
In this case, where capital and labor are substitutes, installing a new oven will drastically reduce the workload thereby necessitating a reduction in the number of workers.
By implication, the cost of paying wages which is a recurrent expenditure will reduce. In the long run and if the oven is maintained, it will e a very cost effective option.
Installing a new oven also suggests a marginal increment in capital.
P5-18 Calculating deposit needed. You put $10,000 in an account earning 5%. After 3 years, you make another deposit into the same account. Four years later (7 years after your original $10,000 deposit), the account balance is $20,000. What was the amount of the deposit at the end of year 3
Answer:
$4877.80
Explanation:
The computation of amount of the deposit at the end of year 3 is shown below:-
Future value = Present value × (1 + Rate of interest ÷ 100)^number of years
$20,000 = 10,000 × (1 + 5 ÷ 100)^7 + Deposit at end of year 3 × (1 + 5 ÷ 100)^4
$20,000 = 10,000 × (1.05)^7 + Deposit at end of year 3 × (1.05)^4
$20,000 = 14071.00423 + Deposit at end of year 3 × (1.05)^4
Deposit at end of year 3 = ($20,000 - 14071.00423 ) ÷ (1.05)^4
= $5928.995773 ÷ 1.21550625
= $4877.799496
or
= $4,877.80
We simply applied the above formula to find out the amount of deposit at the year 3 end
The budgeted income statement presented below is for Burkett Corporation for the coming fiscal year. If Burkett Corporation is able to achieve the budgeted level of sales, its margin of safety in dollars would be?
Sales (50,000 units) $1,000,000
Costs:
Direct materials $270,000
Direct labor 240,000
Fixed factory overhead 100,000
Variable factory overhead 150,000
Fixed marketing costs 110,000
Variable marketing costs 50,000 920,000
Pretax income $80,000
Answer:
Margin of safety= $275,862
Explanation:
Giving the following information:
Sales (50,000 units) $1,000,000
Costs:
Direct materials $270,000
Direct labor 240,000
Fixed factory overhead 100,000
Variable factory overhead 150,000
Fixed marketing costs 110,000
Variable marketing costs 50,000
First, we need to calculate the total variable costs and total fixed costs:
Total variable costs= 270,000 + 240,000 + 150,000 + 50,000
Total variable costs= 710,000
Total fixed costs= 100,000 + 110,000= 210,000
Now, we need to determine the break-even point in dollars:
Break-even point (dollars)= fixed costs/ contribution margin ratio
Break-even point (dollars)= 210,000 / [(1,000,000 - 710,000)/1,000,000]
Break-even point (dollars)= 210,000/0.29
Break-even point (dollars)= 724,138
Finally, the margin of safety in dollars:
Margin of safety= (current sales level - break-even point)
Margin of safety= 1,000,000 - 724,138
Margin of safety= $275,862
Hawk-Dove (or Chicken) (t = tough, c = concede)
Two (young) players are engaged in a conflict situation. For instance, they may be racing their cars towards
each other on Main Street, while being egged on by their many friends. If player 1 hangs tough and stays in
the center of the road while the other player concedeschickens outby moving out of the way, then all glory is
his and the other player eats humble pie. If they both hang tough they end up with broken bones, while if
they both concede they have their bodiesbut not their prideintact.
Player 1 \ Player 2 t c
t -1,-1 10,0
c 0, 10 5, 5
The matrix form can be used to compactly represent the strategic form when there are two players even if
each player has more than two strategies to choose from.
Answer:
Sorry , didn't mean to tap this
Explanation:
Suppose that in April 2023, policymakers undertake the type of policy that is necessary to bring the economy back to the natural level of output, given the scenario just described. In June 2023, exports decrease because Japan implements trade restrictions on goods. Because of the _______ associated with implementing monetary and fiscal policy, the impact of the policymakers' stabilization policy will likely _____________________ once the effects of the policy are fully realized.
Explanation:
Suppose that in April 2023, policymakers undertake the type of policy that is necessary to bring the economy back to the natural level of output, given the scenario just described. In June 2023, exports decrease because Japan implements trade restrictions on goods. Because of the LAGS associated with implementing monetary and fiscal policy, the impact of the policymakers' stabilization policy will likely to push the economy below the poverty line once the effects of the policy are fully realized.
When a certain level of taxation, restrictions, interest rates and barriers are imparted on trade deals and activities by the government then it is called economic policy.
The correct answer for the blanks are:
Blank 1: LAGS
Blank 2: to push the economy below the poverty line
LAGS is the period of time used by the administration or the bank to counter while the state of economical collapses.It is the lag in achieving the financial or the fiscal strategies.The economy during these situations will be below the poverty limit.To learn more about LAGS and the economical crisis follow the link:
https://brainly.com/question/6570392
The following information is taken from the accounts of Latta Company. The entries in the T-accounts are summaries of the transactions that affected those accounts during the year. Manufacturing Overhead (a) 486,144 (b) 405,120 Bal. 81,024 Work in Process Bal. 10,880 (c) 754,000 298,500 90,500 (b) 405,120 Bal. 51,000 Finished Goods Bal. 39,000 (d) 662,000 (c) 754,000 Bal. 131,000 Cost of Goods Sold (d) 662,000 The overhead that had been applied to production during the year is distributed among Work in Process, Finished Goods, and Cost of Goods Sold as of the end of the year as follows: Work in Process, ending $ 24,480 Finished Goods, ending 62,880 Cost of Goods Sold 317,760 Overhead applied $ 405,120 For example, of the $51,000 ending balance in work in process, $24,480 was overhead that had been applied during the year. Required: 1. Identify reasons for entries (a) through (d). 2. Assume that the underapplied or overapplied overhead is closed to Cost of Goods Sold. Prepare the necessary journal entry. 3. Assume that the underapplied or overapplied overhead is closed proportionally to Work in Process, Finished Goods, and Cost of Goods Sold. Prepare the necessary journal entry.
Answer and Explanation:
As per the data given in the question,
1.
a) Cost of goods manufactured.
b) Cost of goods sold.
c) Overhead cost applied to work in process
d) Actual manufacturing overhead cost.
2. Journal Entry
Manufacturing overhead A/c Dr. 81,024
To cost of goods sold A/c. 81,024
3.
Work in process ending $24,480 =6.04%
Finished goods ending $62,880 =15.52%
Cost of goods sold $317,760 =78.44%
Total cost $405.120 =100%
To calculate overhead allocation :
Work in process ending = ($81,024× 6.04%) =$4,894
Finished goods ending = ($81,024 × 15.52%) =$12,575
Cost of goods sold = ($81,024 × 78.44%) = $63,355
Total cost = $81,024
Journal Entry
Manufacturing overhead A/c Dr. 81,024
To work in process A/c. $4,893
To finished goods A/c. $12,575
To cost of goods sold A/c. $63,555
The corporate charter of Andromeda Co. authorized the issuance of 21 million, $1 par common shares. During 2021, its first year of operations, Andromeda had the following transactions: January 1 sold 6 million shares at $26 per share June 3 purchased 13 million shares of treasury stock at $29 per share December 28 sold the 4 million shares of treasury stock at $31 per share What amount should Andromeda report as additional paid-in capital in its December 31, 2021, balance sheet
Answer:
$158 million
Explanation:
The computation of total additional paid in capital is shown below:-
Paid in capital in excess of par value-Common Stock = ($26 - 1) × 6 million
= 25 × 6 million
= $150 million
Paid in capital from sale of treasury Stock = ($31 - $29) × 4 million
= $8 million
Total additional paid in capital = Paid in capital in excess of par value-Common Stock + Paid in capital from sale of treasury Stock
= $150 million + $8 million
= $158 million
So, for computing the total additional paid in capital we simply applied the above formula.
On January 1, 2021, Hoosier Company purchased $940,000 of 10% bonds at face value. The bond market value was $985,000 on December 31, 2021. Required: Prepare the appropriate journal entry on December 31, 2021, to properly value the bonds assuming the bonds are classified as: (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.) Trading securities. Securities available-for-sale. Held-to-maturity securities.
Answer:
1.
Dr Bonds 940,000
Cr Cash 940,000
Dr Fair Value adjustment 45,000
Cr Net Unrealized holding gains & losses 45,000
2.
Dr Fair Value adjustment 45,000
Cr Net Unrealized holding gains & Losses 45,000
3.
Dr Investment in bonds 985,000
Cr Discount on bond investment 45,000
Cr Cash 940,000
Explanation:
Hoosier Company Journal entries
1.
Dr Bonds 940,000
Cr Cash 940,000
Dr Fair Value adjustment 45,000
($985,000-$940,000)
Cr Net Unrealized holding gains & losses 45,000
2.
Dr Fair Value adjustment 45,000
Cr Net Unrealized holding gains & Losses 45,000
3.
Dr Investment in bonds 985,000
Cr Discount on bond investment 45,000
Cr Cash 940,000
Decision on Accepting Additional Business Homestead Jeans Co. has an annual plant capacity of 65,000 units, and current production is 45,000 units. Monthly fixed costs are $54,000, and variable costs are $29 per unit. The present selling price is $42 per unit. On November 12 of the current year, the company received an offer from Dawkins Company for 18,000 units of the product at $32 each. Dawkins Company will market the units in a foreign country under its own brand name. The additional business is not expected to affect the domestic selling price or quantity of sales of Homestead Jeans Co. a. Prepare a differential analysis dated November 12 on whether to reject (Alternative 1) or accept (Alternative 2) the Dawkins order. If an amount is zero, enter "0". If required, use a minus sign to indicate a loss.
Answer and Explanation:
The preparation of the differential analysis is presented below:
Particulars Order rejected (Alternative 1) order accepted (Alternative 2) Differential Effect on Income (Alternative 2)
Revenues $0 $576,000 $576,000
($18,000 × $32)
Costs
Variable Manufacturing Costs $0 $522,000 -$522,000
($18,000 × $29)
Income (Loss) $0 $54,000 $54,000
We simply deduct the variable manufacturing cost from the revenues so that the income or loss could come
Which of the following statements generates the greatest amount of disagreement among economists? a. Increases in the money supply shift aggregate demand to the right. b. In the long run, increases in the money supply increase prices, but not output. c. Recessions are associated with decreases in consumption, investment, and employment. d. Government should use fiscal policy to try to stabilize the economy.
Answer:
d. Government should use fiscal policy to try to stabilize the economy.
Explanation:
Suggesting that the government should use fiscal policy to try to stabilize the economy generates the greatest amount of disagreement among economists because the process of implementing fiscal policy usually experiences lag as it is being slowed down by the political system (bureaucracy) of checks and balances.
Fiscal policy is the use of government expenditures, revenues and tax policies to influence macroeconomic conditions such as employment, inflation and Aggregate Demand (ADl in a specific country.
The benefits of fiscal policy is that investments, savings and growth is usually influenced in the long-run while it basically influences aggregate demand for goods and services in the short-run.
If all goes according plan, Robo-Tech will soon have access to a new valuable external financing resource, that it can use to finance it future growth potential. To Do a. For Robo-Tech, what are the advantages of being a publicly listed company? b. For Robo-Tech, what are the disadvantages of being a publicly listed company? c. If Robo-Tech prefers that its shares trade on a centralized exchange, what listing exchanges make the most sense for Robo-Tech and why? d. Once Robo-Tech has sold its shares to the public does it care whether capital markets are efficient? In other words, how does market efficiency affect Robo-Tech?
Answer:
The overview of the offer problem is listed in the segment below on the explanation.
Explanation:
Becoming a publicly traded business gives access to that information or fund that it wants to expand. Shareholders can receive cash if a payout is not received, without getting the right to refer the organization to bankruptcy proceedings.Making it public gives the business the opportunity to even get a come back through his as well as her hard work. The proprietor can consolidate his and perhaps her business plan by releasing information. In reality, it's hard to evaluate the corporation's worth without making it public.So that the above is the right answer.
Answer:
????
Explanation:
The following information will be used for 2 questions on this exam: Charlotte Corporation's management keeps track of the time it takes to process orders. During the most recent month, the following average times were recorded per order: Time spent between receipt of order and start of production 3.7 days Time spent ensuring quality levels 0.2 days Time spent working on the product 1.3 days Time spent transporting the product between work stations 0.8 days Time spent waiting to be worked on in the factory 6.9 days What is the throughput time?
Answer:
6.00 days
Explanation:
data provided
Inspection time = 3.7 days
Process time = 0.2 days
Move time = 1.3 days
Queue time = 0.8 days
The calculation of throughput time is given below:-
Throughput time = Inspection time + Process time + Move time + Queue time
= 3.7 days + 0.2 days + 1.3 days + 0.8 days
= 6.00 days
Here, we added the inspection time, process time , move time and queue time to reach at throughput time and we ignore the time spent waiting to be worked on in the factory as it is not relevant.
Dan Bumblauskas is the owner of a small Iowa company that produces electric knives used to cut fabric. The annual demand is for 10 comma 500 knives, and Dan produces the knives in batches. On average, Dan can produce 190 knives per day; during the production process, demand has been about 70 knives per day. The cost to set up the production process is $85, and it costs Dan $1.10 to carry a knife for 1 year. How many knives should Dan produce in each batch?
Answer:
1,012.36 knives produced in each month
Explanation:
Data provided in the question
Annual demand = 10,500
Ordering cost = $85
Holding cost = $1.10
Daily demand = 70 knives per day
Production knives per day = 190 knives
Based on the given information, we need to apply the formula which is shown below:[tex]Economic\ order\ quantity = \sqrt{\frac{2\times annual\ demand \times ordering\ cost}{holding\ cost} \times 1 - \frac{daily\ demand}{production}[/tex]
[tex]Economic\ order\ quantity = \sqrt{\frac{2\times 10,500 \times\$85}{\$1.10} \times 1 - \frac{70}{190}[/tex]
= 1,012.36 knives produced in each month
We simply applied the above formula to find out the knives produced in each batch
Coast to Coast Surfboards Inc. manufactures and sells two styles of surfboards, Atlantic Wave and Pacific Pounder. These surfboards are sold in two regions, East Coast and West Coast. Information about the two surfboards is as follows:
Atlantic Wave Pacific Pounder
Sales price $280 $130
Variable cost of goods sold per unit 220 97
Manufacturing margin per unit $60 $33
Variable selling expense per unit 32 18
Contribution margin per unit $28 $15
The sales unit volume for the sales territories and products for the period is as follows:
East Coast West Coast
Atlantic Wave 30,000 21,000
Pacific Pounder 0 21,000
Required:
Prepare a contribution margin by sales territory report. Calculate the contribution margin ratio for each territory as a whole percent
Answer:
Contribution margin ratio:
For East Coast = 10%
For West Coast = 8.05%
Explanation:
As per the data given in the question,
Contribution margin by sales territory report :
C C S Inc.
Contribution margin by Territory
Particulars East Coast West Coast
Sales (a) $8,400,000 $8,610,000
(30,000×$280)+(0×$130)
(21,000×$280)+(21,000×$130)
Less: variable cost of goods sold(b) $6,600,000 $6,657,000
(30,000×$220)+(0×$97)
(21,000×$220)+(21,000×$97)
Manufacturing margin (c=a-b) $1,800,000 $1,953,000
Less: Variable selling expense (d) $960,000 $1,260,000
(30,000×$32)+(0×$28)
(21,000×$32)+(21,000×$28)
Contribution margin (e=c-d) $840,000 $693,000
For East Coast:
Contribution margin ratio = (Contribution margin ÷ Sales revenue)×100
=($840,000÷ $8,400,000)×100
= 10%
For west coast:
Contribution margin ratio = (Contribution margin ÷ Sales revenue)×100
=($693,000 ÷ $8,610,000)×100
= 8.05%
A firm that has an ROE of 12% is considering cutting its dividend payout. The stockholders of the firm desire a dividend yield of 4% and a capital gain yield of 9%. Given this information, which of the following statements is (are) correct? I. All else equal, the firm's growth rate will accelerate after the payout change. II. All else equal, the firm's stock price will go up after the payout change. III. All else equal, the firm's P/E ratio will increase after the payout change. Multiple Choice I only
Answer:
I only is correct. That is, all else equal, the firm's growth rate will accelerate after the payout change.
Explanation:
Holding every other condition constant, the cutting of the company's dividend payout will lead to a permanent fall in the dividend per share and this will cause a decrease in price.
However, the cutting the company's dividend payout will increased the retention rate that will increase the growth rate of the company.
Therefore, all else equal, the firm's growth rate will accelerate after the payout change.
Information on Carney Company's fixed overhead costs follows: Overhead applied $ 361,200 Actual overhead 387,300 Budgeted overhead 372,000 Required: What are the fixed overhead price and production volume variances? (Indicate the effect of each variance by selecting "F" for favorable, or "U" for unfavorable. If there is no effect, do not select either option.)
Answer:
The Fixed overhead price is "U" (unfavorable) and the The fixed overhead production volume is "U" (unfavorable)
Explanation:
Solution
Given that:
Fixed overhead price Variance is computed as:
Fixed overhead price Variance = Actual - Budgeted
= 387,300 - 372,000
= 15,300 U
Thus,
The Fixed overhead production volume variance is computed as:
Fixed overhead production volume variance = = Budgeted - applied
= 372,000 - 361,200
= 10,800 U
When Starbucks sells "Starbucks" T-shirts in its coffee shops or when the Chicago Cubs peddle cubs branded merchandise at Wrigley Field, why are their marketers so happy?
Answer:
Because they have produced beyond their normal sale products such as coffee for Starbucks in other words they have found a other way to make more money.
Explanation:
pls mark brainliest
Anderson Steel Company began 2018 with 550,000 shares of common stock outstanding. On March 31, 2018, 140,000 new shares were sold at a price of $50 per share. The market price has risen steadily since that time to a high of $55 per share at December 31. No other changes in shares occurred during 2018, and no securities are outstanding that can become common stock. However, there are two agreements with officers of the company for future issuance of common stock. Both agreements relate to compensation arrangements reached in 2017. The first agreement grants to the company president a right to 42,000 shares of stock each year the closing market price is at least $53. The agreement begins in 2019 and expires in 2022. The second agreement grants to the controller a right to 47,000 shares of stock if she is still with the firm at the end of 2026. Net income for 2018 was $5,200,000.
Required:
Compute Anderson Steel Company's basic and diluted EPS for the year ended December 31, 2018. (Enter your answers in thousands.)
Answer:
EPS = $7.94
diluted EPS = $7.94, since there are no diluted shares in 2018
Explanation:
January 2018 = 550,000 common stocks
March 31 = 140,000 new shares issued = 105,000 weighted stocks
net income = $5,200,000
EPS = net income / weighted common stocks = $5,200,000 / (550,000 + 105,000) = $5,200,000 / 655,000 stocks = $7.939 ≈ $7.94 per stock
there are no diluted shares since the agreement with the president of the board starts in 2019, and we are calculating the EPS for 2018. The same applies to the controller, since her agreement starts in 2026.
On November 27, the board of directors of Armstrong Company declared a $.50 per share dividend. The dividend is payable to shareholders of record on December 7 on December 24. Armstrong has 25,500 shares of $1 par common stock outstanding at November 27. Journalize the entries needed on the declaration and payment dates. (Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts.)
Answer:
On November 27
Debit Retained earnings $12,750
Credit Dividend payable $12,750
(To record the dividend declared)
On December 24
Debit Dividend payable $12,750
Credit Cash $12,750
(To record dividend paid)
Explanation:
Dividends on gains on shares bought by the shareholders. They arise due to appreciation in share price and improvement in company's net income.The dividend payable was calculated as $.5 x 25,500 shares = $12,750.Dividends are usually paid out of retained earnings.The dividend payable account is debited when payment is to be made.The following information relates to the pension plan for the employees of Turner Co.: 1/1/20 12/31/20 12/31/21 Projected benefit obligation 9,765,000 10,458,000 14,007,000 Fair value of plan assets 8,925,000 10,920,000 12,054,000 AOCI – net (gain) or loss -0- (1,512,000) (1,680,000) Settlement rate (for year) 11% 11% Expected rate of return (for year) 8% 7% Turner estimates that the average remaining service life is 16 years. Turner's contribution was $1,323,000 in 2021 and benefits paid to retired employees was $987,000. The amount of AOCI (net gain) amortized in 2021 is
Answer:
The amount of AOCI (net gain) amortized in 2021 is $26,250
Explanation:
In order to calculate the calculate the amount of AOCI (net gain) amortized in 2021 we would have to use the following formula:
amount of AOCI (net gain) amortized in 2021=(AOCI net gain 12/31/20-Corridor amount for 2021)/Average remaining service life
AOCI net gain 12/31/20=$1,512,000
Corridor amount for 2021=$1,092,000=10,920,000*10%
Average remaining service life=16
Therefore, AOCI (net gain) amortized in 2021=($1,512,000-$1,092,000)/16
AOCI (net gain) amortized in 2021=$26,250
Flagstaff Company has budgeted production units of 7,900 for July and 8,100 for August. The direct materials requirement per unit is 2 ounces (oz.). The company requires to have safety stock of direct materials on hand at the end of each month to complete 20% of the units of budgeted production in the following month. There was 3,160 ounces of direct material in inventory at the start of July. The total ounces of direct materials to be purchased in July is:
Answer:
Purchases= 15,880 ounces
Explanation:
Giving the following information:
Production:
July= 7,900
August= 8,100
The direct materials required per unit is 2 ounces (oz.).
Ending inventory= 20% of the units of budgeted production in the following month.
There were 3,160 ounces of direct material in inventory at the start of July.
To calculate the direct material purchase required, we need to use the following formula:
Purchases= production + desired ending inventory - beginning inventory
Purchases= 7,900*2 + (8,100*2)*0.2 - 3,160
Purchases= 15,880 ounces
Financial statement data for the years ended December 31 for Parker Corporation are as follows: Current Year Prior Year Sales $2,595,600 $2,409,498 Fixed assets (net): Beginning of year $901,070 $820,000 End of year 829,330 901,070 a. Determine the fixed asset turnover ratio for the current and prior years. Round your answers to one decimal place. Current Year: Prior Year: b. Does the change in fixed asset turnover ratio from the prior year to the current year indicate a favorable or unfavorable trend
Answer:
we need to calculate the Average Fixed assets for both the periods.
Average Fixed Assets = (Fixed Assets at the beginning + Fixed assets at the ending period)/2
Current Year = ($901070+829330)/2
= 1730400/2
=$865200
Prior Year = $820000+901070
= 1721070/2
= $860535
Fixed Assets Turnover = Sales/Average Fixed Assets
Current year = $2595600/865200
= 3
Prior Year = $2409498/860535
= 2.8
b) There is an increase in the Fixed asset turnover which indicates an increase in efficiency of using fixed assets to generate sales.
Answer:
a. Current year 1.5 Prior year 1.4
b. Yes it indicates a favorable trend as it shows that sales of $1.50 was generated for every $1 invested in current year as against $1.40 for every $1 invested in prior year.
Explanation:
Fixed Asset turnover is the ratio of revenue to average Fixed assets of a company.
It is a financial indicator that shows how much revenue a company generates in an accounting period for each $ 1 invested in assets (fixed asset in this case).
Average assets in the
current year
= $901,070 + $829,330
= $1,730,400
Prior year
= $820,000 + $901,070
= $1,721,070
As such fixed assets turnover for
current year
= $2,595,600/$1,730,400
= 1.5
prior year
= $2,409,498/$1,721,070
= 1.4
A company sold $12,000 worth of bicycles with an extended warranty. The company’s experience is that warranty expense averages 2% of sales. The current period’s entry to record the warranty expense is: Multiple Choice Debit Warranty Expense $240; credit Cash $240. Debit Prepaid Warranties $240; credit Warranty Expense $240. Debit Estimated Warranty Liability $240; credit Cash $240. Debit Sales Allowances $240; credit Estimated Warranty Liability $240. Debit Warranty Expense $240; credit Estimated Warranty Liability $240.
Answer:
Debit Warranty Expense $240; credit Estimated Warranty Liability $240.
Explanation:
The Journal entry is shown below:-
Warranty expenses Dr, $240
To Estimated warranty liability $240
(Being warranty expense is recorded)
When the company sells warranty items, the warranty expenses & warranty liability will only be considered in the selling year.
Working note:-
Warranty expenses & Estimated warranty liability to be recognize = Sales × Estimated percentage of warranty work
= $12,000 × 2%
= $240
The current period’s entry to record the warranty expense is Debit Warranty Expense $240; credit Estimated Warranty Liability $240.
The Journal entry is as below:-
Warranty expenses Dr, $240 (2% of $12,000)
To Estimated warranty liability $240
(Being warranty expense is recorded)
Therefore we can conclude that The current period’s entry to record the warranty expense is Debit Warranty Expense $240; credit Estimated Warranty Liability $240.
Learn more: brainly.com/question/6201432
g Smiley Corporation wholesales repair products to equipment manufacturers. On April 1, 20Y1, Smiley issued $20,000,000 of five-year, 9% bonds at a market (effective) interest rate of 8%, receiving cash of $20,811,010. Interest is payable semiannually on April 1 and October 1. a. Journalize the entry to record the issuance of bonds on April 1, 20Y1. If an amount box does not require an entry, leave it blank. b. Journalize the entry to record the first interest payment on October 1, 20Y1, and amortization of bond premium for six months, using the straight-line method. If an amount box does not require an entry, leave it blank. c. Why was the company able to issue the bonds for $20,811,010 rather than for the face amount of $20,000,000? The market rate of interest is the contract rate of interest.
Answer:
Explanation:
a
Cash 20811010
Bonds payable 20000000
Premium on Bonds payable 811010
b
Interest expense 818899
Premium on Bonds payable 81101 =811010/5*6/12
Cash 900000 =20000000*9%*6/12
c
The market rate of interest will be lower than the contract rate of interest.
Which one of the following statements is correct concerning the mutual fund cash ratio (MFCR)? A. When mutual funds have a lot of cash it is a bearish signal because managers are not buying stocks. Your answer is not correct.B. A high MFCR is like high short interest in that it indicates pent up demand. This is the correct answer.C. Low mutual fund cash is bullish because it means managers have been buying stocks. D. High mutual fund cash indicates that fund managers might be forced to sell securities should investors wish to withdraw funds, a bearish signal.
Answer:
Following is the correct statement "When mutual funds have a lot of cash it is a bearish signal because managers are not buying stocks"
Explanation:
When the common assets have a large proportion of cash, it is the indications that stock managers are the market bearish in common and hold back on purchasing.
Therefore, the correct statement in he given scenario is A and other statement B, C and D are incorrect
Foreman Mining purchased land containing a copper deposit for $2,640,000 on January 7, 2021. The company expects to mine 770,000 tons of copper over the next 10 years, and the land is expected to have a residual value of $1,408,000. The company has also purchased mining equipment for $570,000 that will be used only at this site over the 10 years with an estimated residual value of $54,100. By the end of the first year, the company has mined and sold 61,000 tons of copper. What is the cost attributed to copper inventory for 2021, assuming the company uses the units-of-production method?
Answer:
$138,470
Explanation:
cost of mine = $2,640,000
residual value of the land = $1,408,000
cost of equipment = $570,000
residual value = $54,100
it should contain 770,000 tons of copper
units of production depreciation method:
depreciation of mine = ($2,640,000 - $1,408,000) / 770,000 tons of copper = $1.60 per ton of copperdepreciation of equipment = ($570,000 - $54,100) / 770,000 tons of copper = $0.67 per ton of coppertotal depreciation per ton of copper = $1.60 + $0.67 = $2.27since 61,000 tons were extracted, then the depreciation expense = 61,000 x $2.27 = $138,470
a doctor works in a....
Answer:
Clinic or Hospital
Explanation:
:)
Smart Stream Inc. uses the total cost method of applying the cost-plus approach to product pricing. The costs of producing and selling 10,000 units of cell phones are as follows: Variable costs per unit: Fixed costs: Direct materials $150 Factory overhead $350,000 Direct labor 25 Selling and administrative expenses 140,000 Factory overhead 40 Selling and administrative expenses 25 Total variable cost per unit $240 Smart Stream desires a profit equal to a 30% return on invested assets of $1,200,000.
a. Determine the variable costs and the variable cost amount per unit for the production and sale of 10,000 cellular phones. Total variable cost $ Variable cost amount per unit $
b. Determine the variable cost markup percentage for cellular phones. Round to two decimal places.
c. Determine the selling price of cellular phones. If required, round to the nearest dollar.
Answer:
(a). Total variable Cost = $2,890,000
Total variable Cost Per Unit = $289
(b). Variable Cost Markup Percentage = 12.46%
(c). Selling Price Per Unit = $325
Explanation:
According to the scenario, computation of the given data are as follow:-
a). Total Fixed Cost = Selling and Administrative Expenses + Factory Overhead
= $140,000 + $350,000 = $490,000
Fixed Cost Per Unit = Total Fixed Cost ÷ Cost of Produced and Selling Units
= $490,000 ÷ 10,000 = $49
Total variable Cost Per Unit = Fixed Cost Per Unit + Variable Cost Per Unit
= $49 + $240 = $289
Total variable Cost = Cost of Produced and Selling Units × Total Cost Per Unit
= 10,000 × $289 = $2,890,000
b). Desired Profit = Invested Assets × 30%
= $1,200,000 × 30÷100 = $360,000
Variable Cost Markup Percentage = Desired Profit ÷ Total Cost
=$360,000 ÷ $2,890,000 = 0.1246 = 12.46%
c). Selling Price Per Unit = (1 + Variable Cost Markup Percentage) × Total Cost Per Unit
= (1 + 12.46%) × $289
= 1.1246 × $289
= $325
Todd is working on resource scheduling in preparation for the start of a project. There is a potential problem in the works, however, as the new collective bargaining agreement with the company's union has not been concluded. Todd decides to continue working on the resource schedule in anticipation of a satisfactory settlement. Todd's approach would be an example of which method of dealing with risk
Answer:
Accept it.(Risk).
Explanation:
This is commonly known also as risk retention which is been encountered in business or investments. Many businesses use risk management techniques to identify, assess and prioritize risks for the purpose of minimizing, monitoring, and controlling said risks.
Most businesses and risk management personnel will find that they have greater and more numerous risks than they can manage, mitigate, or avoid given the resources they are allocated. As such, businesses must find a balance between the potential costs of an issue resulting from a known risk and the expense involved in avoiding or otherwise dealing with it. Types of risks include uncertainty in financial markets, project failures, legal liabilities, credit risk, accidents, natural causes and disasters, and overly aggressive competition.
The Talbot Corporation makes wheels that it uses in the production of bicycles. Talbot's costs to produce 100,000 wheels annually are: Direct materials $30,000 Direct labor $50,000 Variable manufacturing overhead $20,000 Fixed manufacturing overhead $70,000 An outside supplier has offered to sell Talbot similar wheels for $1.25 per wheel. If the wheels are purchased from the outside supplier, $15,000 of annual fixed overhead could be avoided and the facilities now being used could be rented to another company for $45,000 per year. Direct labor is a variable cost. If Talbot chooses to buy the wheel from the outside supplier, then annual net operatingincome would: A. Increase by $35,000 B. Decrease by $10,000 C. Increase by $45,000 D. Increase by $70,000
Answer:
Increase in net annual operating income $35,000
Explanation:
$
Variable cost of internal production
(30,000+50,000 + 20,000) 100,000
Variable cost of purchase (1.25× 100,000) 125,000
Extra variable cost of buying ( 25,000)
Add savings in fixed cost from 15,000
Add rent from facilities 45,000
Increase in net annual operating income 35,000
Increase in net annual operating income $35,000
The balance of the the fixed cost is not relevant hence it was not considered. This is so because whatever decision is taken, it would be incurred either way
