Answer:
Check the explanation
Explanation:
#include <iostream>
using namespace std;
void CoordTransform(int x, int y, int& xValNew,int& yValNew){
xValNew = (x+1)*2;
yValNew = (y+1)*2;
}
int main() {
int xValNew = 0;
int yValNew = 0;
CoordTransform(3, 4, xValNew, yValNew);
cout << "(3, 4) becomes " << "(" << xValNew << ", " << yValNew << ")" << endl;
return 0;
}
You work at a cheeseburger restaurant. Write a program that determines appropriate changes to a food order based on the user’s dietary restrictions. Prompt the user for their dietary restrictions: vegetarian, lactose intolerant, or none. Then using if statements and else statements, print the cook a message describing how they should modify the order. The following messages should be used: - If the user enters "lactose intolerant", say "No cheese." - If the user enters "vegetarian", say "Veggie burger." - If the user enters "none", say "No alterations."
Answer:
See explaination
Explanation:
dietary_restrictions = input("Any dietary restrictions?: ")
if dietary_restrictions=="lactose intolerant":
print("No cheese")
elif dietary_restrictions == "vegetarian":
print("Veggie burger")
else:
print("No alteration")
Let U = {b1, b2, , bn} with n ≥ 3. Interpret the following algorithm in the context of urn problems. for i is in {1, 2, , n} do for j is in {i + 1, i + 2, , n} do for k is in {j + 1, j + 2, ..., n} do print bi, bj, bk How many lines does it print? It prints all the possible ways to draw three balls in sequence, without replacement. It prints P(n, 3) lines. It prints all the possible ways to draw an unordered set of three balls, without replacement. It prints P(n, 3) lines. It prints all the possible ways to draw three balls in sequence, with replacement. It prints P(n, 3) lines. It prints all the possible ways to draw an unordered set of three balls, without replacement. It prints C(n, 3) lines. It prints all the possible ways to draw three balls in sequence, with replacement. It prints C(n, 3) lines.
Answer:
Check the explanation
Explanation:
Kindly check the attached image for the first step
Note that the -print" statement executes n(n — I)(n — 2) times and the index values for i, j, and k can never be the same.
Therefore, the algorithm prints out all the possible ways to draw three balls in sequence, without replacement.
Now we need to determine the number of lines this the algorithm print. In this case, we are selecting three different balls randomly from a set of n balls. So, this involves permutation.
Therefore, the algorithm prints the total
P(n, 3)
lines.
#define DIRECTN 100
#define INDIRECT1 20
#define INDIRECT2 5
#define PTRBLOCKS 200
typedef struct {
filename[MAXFILELEN];
attributesType attributes; // file attributes
uint32 reference_count; // Number of hard links
uint64 size; // size of file
uint64 direct[DIRECTN]; // direct data blocks
uint64 indirect[INDIRECT1]; // single indirect blocks
uint64 indirect2[INDIRECT2]; // double indirect
} InodeType;
Single and double indirect inodes have the following structure:
typedef struct
{
uint64 block_ptr[PTRBLOCKS];
}
IndirectNodeType;
Required:
Assuming a block size of 0x1000 bytes, write pseudocode to return the block number associated with an offset of N bytes into the file.
Answer:
WOW! that does not look easy!
Explanation:
I wish i could help but i have no idea how to do that lol
Which of the following should be the first page of a report?
O Title page
Introduction
O Table of contents
Terms of reference
Answer:
Title page should be the first page of a report.
hope it helps!
Design an application for Bob's E-Z Loans. The application accepts a client's loan amount and monthly payment amount. Output the customer's loan balance each month until the loan is paid off. b. Modify the Bob's E-Z Loans application so that after the payment is made each month, a finance charge of 1 percent is added to the balance.
Answer:
part (a).
The program in cpp is given below.
#include <stdio.h>
#include <iostream>
using namespace std;
int main()
{
//variables to hold balance and monthly payment amounts
double balance;
double payment;
//user enters balance and monthly payment amounts
std::cout << "Welcome to Bob's E-Z Loans application!" << std::endl;
std::cout << "Enter the balance amount: ";
cin>>balance;
std::cout << "Enter the monthly payment: ";
cin>>payment;
std::cout << "Loan balance: " <<" "<< "Monthly payment: "<< std::endl;
//balance amount and monthly payment computed
while(balance>0)
{
if(balance<payment)
{ payment = balance;}
else
{
std::cout << balance <<"\t\t\t"<< payment << std::endl;
balance = balance - payment;
}
}
return 0;
}
part (b).
The modified program from part (a), is given below.
#include <stdio.h>
#include <iostream>
using namespace std;
int main()
{
//variables to hold balance and monthly payment amounts
double balance;
double payment;
double charge=0.01;
//user enters balance and monthly payment amounts
std::cout << "Welcome to Bob's E-Z Loans application!" << std::endl;
std::cout << "Enter the balance amount: ";
cin>>balance;
std::cout << "Enter the monthly payment: ";
cin>>payment;
balance = balance +( balance*charge );
std::cout << "Loan balance with 1% finance charge: " <<" "<< "Monthly payment: "<< std::endl;
//balance amount and monthly payment computed
while(balance>payment)
{
std::cout << balance <<"\t\t\t\t\t"<< payment << std::endl;
balance = balance +( balance*charge );
balance = balance - payment;
}
if(balance<payment)
{ payment = balance;}
std::cout << balance <<"\t\t\t\t\t"<< payment << std::endl;
return 0;
}
Explanation:
1. The variables to hold the loan balance and the monthly payment are declared as double.
2. The program asks the user to enter the loan balance and monthly payment respectively which are stored in the declared variables.
3. Inside a while loop, the loan balance and monthly payment for each month is computed with and without finance charges in part (a) and part (b) respectively.
4. The computed values are displayed for each month till the loan balance becomes zero.
5. The output for both part (a) and part (b) are attached as images.
Write a program whose input is a character and a string, and whose output indicates the number of times the character appears in the string.
Ex: If the input is:
n Monday
the output is:
1
Ex: If the input is:
z Today is Monday
the output is:
0
Ex: If the input is:
n It's a sunny day
the output is:
2
Case matters.
Ex: If the input is:
n Nobody
the output is:
0
n is different than N.
This is what i have so far.
#include
#include
using namespace std;
int main() {
char userInput;
string userStr;
int numCount;
cin >> userInput;
cin >> userStr;
while (numCount == 0) {
cout << numCount << endl;
numCount = userStr.find(userInput);
}
return 0;
}
Who is your favorite smite god in Hi-Rez’s “Smite”
Answer:
Variety
Explanation:
the smallest unit of time in music called?
Answer:
Ready to help ☺️
Explanation:
A tatum is a feature of music that has been defined as the smallest time interval between notes in a rhythmic phrase.
Answer:
A tatum bc is a feature of music that has been variously defined as the smallest time interval between successive notes in a rhythmic phrase "the shortest durational value
The cord of a bow string drill was used for
a. holding the cutting tool.
b. providing power for rotation.
c. transportation of the drill.
d. finding the center of the hole.
Answer:
I don't remember much on this stuff but I think it was B
Explain possible ways that Darla can communicate with her coworker Terry, or her manager to make sure Joe receives great customer service?
Answer:
They can communicate over the phone or have meetings describing what is and isn't working for Joe. It's also very important that Darla makes eye contact and is actively listening to effectively handle their customer.
Explanation:
*Sometimes it is difficult to convince top management to commit funds to develop and implement a SIS why*
Step-by-step Explanation:
SIS stands for: The Student Information System (SIS).
This system (a secure, web-based accessible by students, parents and staff) supports all aspects of a student’s educational experience, and other information. Examples are academic programs, test grades, health information, scheduling, etc.
It is difficult to convince top management to commit funds to develop and implement SIS, this can be due to a thousand reasons.
The obvious is that the management don't see the need for it. They would rather have students go through the educational process the same way they did. Perhaps, they just don't trust the whole process, they feel more in-charge while using a manual process.
Suppose that a program's data and executable code require 1,024 bytes of memory. A new section of code must be added; it will be used with various values 70 times during the execution of a program. When implemented as a macro, the macro code requires 73 bytes of memory. When implemented as a procedure, the procedure code requires 132 bytes (including parameter-passing, etc.), and each procedure call requires 7 bytes. How many bytes of memory will the entire program require if the new code is added as a procedure? 1,646
Answer:
The answer is 1646
Explanation:
The original code requires 1024 bytes and is called 70 times ,it requires 7 byte and its size is 132 bytes
1024 + (70*7) + 132 = 1024 + 490 +132
= 1646
6. Why did he choose to install the window not totally plumb?
Answer:
Because then it would break
Explanation:
You achieve this by obtaining correct measurements. When measuring a window, plumb refers to the vertical planes, and level refers to the horizontal planes. So he did not install the window totally plumb
Computer A has an overall CPI of 1.3 and can be run at a clock rate of 600 MHz. Computer B has a CPI of 2.5 and can be run at a clock rate of 750 MHz. We have a particular program we wish to run. When compiled for computer A, this program has exactly 100,000 instructions. How many instructions would the program need to have when compiled for Computer B, in order for the two computers to have exactly the same execution time for this program
Answer:
Check the explanation
Explanation:
CPI means Clock cycle per Instruction
given Clock rate 600 MHz then clock time is Cー 1.67nSec clockrate 600M
Execution time is given by following Formula.
Execution Time(CPU time) = CPI*Instruction Count * clock time = [tex]\frac{CPI*Instruction Count}{ClockRate}[/tex]
a)
for system A CPU time is 1.3 * 100, 000 600 106
= 216.67 micro sec.
b)
for system B CPU time is [tex]=\frac{2.5*100,000}{750*10^6}[/tex]
= 333.33 micro sec
c) Since the system B is slower than system A, So the system A executes the given program in less time
Hence take CPU execution time of system B as CPU time of System A.
therefore
216.67 micro = =[tex]\frac{2.5*Instruction}{750*10^6}[/tex]
Instructions = 216.67*750/2.5
= 65001
hence 65001 instruction are needed for executing program By system B. to complete the program as fast as system A
The number of instructions that the program would need to have when compiled for Computer B is; 65000 instructions
What is the execution time?
Formula for Execution time is;
Execution time = (CPI × Instruction Count)/Clock Time
We are given;
CPI for computer A = 1.3
Instruction Count = 100000
Clock time = 600 MHz = 600 × 10⁶ Hz
Thus;
Execution time = (1.3 * 100000)/(600 × 10⁶)
Execution time(CPU Time) = 216.67 * 10⁻⁶ second
For CPU B;
CPU Time = (2.5 * 100000)/(750 × 10⁶)
CPU Time = 333.33 * 10⁻⁶ seconds
Thus, instructions for computer B for the two computers to have same execution time is;
216.67 * 10⁻⁶ = (2.5 * I)/(750 × 10⁶)
I = (216.67 * 10⁻⁶ * 750 × 10⁶)/2.5
I = 65000 instructions
Read more about programming instructions at; https://brainly.com/question/15683939
Help its simple but I don't know the answer!!!
If you have a -Apple store and itunes gift card-
can you use it for in app/game purchases?
Answer:
yes you can do that it's utter logic
Answer:
Yes.
Explanation:
Itunes gift cards do buy you games/movies/In app purchases/ect.
Select the correct navigational path to create the function syntax to use the IF function.
Click the Formula tab on the ribbon and look in the ???
'gallery
Select the range of cells.
Then, begin the formula with the ????? click ?????. and click OK.
Add the arguments into the boxes for Logical Test, Value_if_True, and Value_if_False.
Answer:
1. Logical
2.=
3.IF
Explanation:
just did the assignment
Write a functionvector merge(vector a, vector b)that merges two vectors, alternating elements from both vectors. If one vector isshorter than the other, then alternate as long as you can and then append the remaining elements from the longer vector. For example, if a is 1 4 9 16and b is9 7 4 9 11then merge returns the vector1 9 4 7 9 4 16 9 1118. Write a predicate function bool same_elements(vector a, vector b)that checks whether two vectors have the same elements in some order, with the same multiplicities. For example, 1 4 9 16 9 7 4 9 11 and 11 1 4 9 16 9 7 4 9 would be considered identical, but1 4 9 16 9 7 4 9 11 and 11 11 7 9 16 4 1 would not. You will probably need one or more helper functions.19. What is the difference between the size and capacity of a vector
Answer:
see explaination for code
Explanation:
CODE
#include <iostream>
#include <vector>
using namespace std;
vector<int> merge(vector<int> a, vector<int> b) {
vector<int> result;
int k = 0;
int i = 0, j = 0;
while (i < a.size() && j < b.size()) {
if (k % 2 == 0) {
result.push_back(a[i ++]);
} else {
result.push_back(b[j ++]);
}
k ++;
}
while (i < a.size()) {
result.push_back(a[i ++]);
}
while(j < b.size()) {
result.push_back(b[j ++]);
}
return result;
}
int main() {
vector<int> a{1, 4, 9, 16};
vector<int> b{9, 7, 4, 9, 11};
vector<int> result = merge(a, b);
for (int i=0; i<result.size(); i++) {
cout << result[i] << " ";
}
}
Write a statement that calls the recursive method backwardsAlphabet() with parameter startingLetter.
import java.util.Scanner; public class RecursiveCalls { public static void backwardsAlphabet(char currLetter) { if (currLetter == 'a') { System.out.println(currLetter); } else { System.out.print(currLetter + " "); backwardsAlphabet((char)(currLetter - 1)); } } public static void main (String [] args) { Scanner scnr = new Scanner(System.in); char startingLetter; startingLetter = scnr.next().charAt(0); /* Your solution goes here */ } }
Answer:
Following are the code to method calling
backwardsAlphabet(startingLetter); //calling method backwardsAlphabet
Output:
please find the attachment.
Explanation:
Working of program:
In the given java code, a class "RecursiveCalls" is declared, inside the class, a method that is "backwardsAlphabet" is defined, this method accepts a char parameter that is "currLetter". In this method a conditional statement is used, if the block it will check input parameter value is 'a', then it will print value, otherwise, it will go to else section in this block it will use the recursive function that prints it's before value. In the main method, first, we create the scanner class object then defined a char variable "startingLetter", in this we input from the user and pass its value into the method that is "backwardsAlphabet".Retail price data for n = 60 hard disk drives were recently reported in a computer magazine. Three variables were recorded for each hard disk drive: y = Retail PRICE (measured in dollars) x1 = Microprocessor SPEED (measured in megahertz) (Values in sample range from 10 to 40) x2 = CHIP size (measured in computer processing units) (Values in sample range from 286 to 486) A first-order regression model was fit to the data. Part of the printout follows: __________.
Answer:
Explanation:
Base on the scenario been described in the question, We are 95% confident that the price of a single hard drive with 33 megahertz speed and 386 CPU falls between $3,943 and $4,987
The relationship between the temperature of a fluid (t, in seconds), temperature (T, in degrees Celsius), is dependent upon the initial temperature of the liquid (T0, in degrees Celsius), the ambient temperature of the surroundings (TA, in degrees Celsius) and the cooling constant (k, in hertz); the relationship is given by: ???? ???? ???????? ???? ???????????? ???? ???????????? ???????????????? Ask the user the following questions: From a menu, choose fluid ABC, FGH, or MNO. Enter the initial fluid temperature, in units of degrees Celsius. Enter the time, in units of minutes. Enter the ambient air temperature, in units of degrees Celsius. Enter the following data into the program. The vector contains the cooling constant (k, units of hertz) corresponding to the menu entries. K Values = [0.01, 0.03, 0.02] Create a formatted output statement for the user in the Command Window similar to the following. The decimal places must match. ABC has temp 83.2 degrees Celsius after 3 minutes. In
Answer:
See explaination
Explanation:
clc;
clear all;
close all;
x=input(' choose abc or fgh or mno:','s');
to=input('enter intial fluid temperature in celcius:');
t1=input('enter time in minutes:');
ta=input('enter ambient temperature in celcius:');
abc=1;
fgh=2;
mno=3;
if x==1
k=0.01;
elseif x==2
k=0.03;
else
k=0.02;
end
t=ta+((to-ta)*exp((-k)*t1));
X = sprintf('%s has temp %f degrees celcius after %d minutes.',x,t,t1);
disp(X);
How can u refer to additional information while giving a presentation
Answer:
There are various ways: Handing out papers/fliers to people, or presenting slides.
Write a program with total change amount as an integer input that outputs the change using the fewest coins, one coin type per line. The coin types are dollars, quarters, dimes, nickels, and pennies. Use singular and plural coin names as appropriate, like 1 penny vs. 2 pennies. Ex: If the input is: 0 or less, the output is: no change Ex: If the input is: 45 the output is: 1 quarter 2 dimes
Answer:.
// Program is written in C++.
// Comments are used for explanatory purposes
// Program starts here..
#include<iostream>
using namespace std;
int main()
{
// Declare Variables
int amount, dollar, quarter, dime, nickel, penny;
// Prompt user for input
cout<<"Amount: ";
cin>>amount;
// Check if input is less than 1
if(amount<=0)
{
cout<<"No Change";
}
else
{
// Convert amount to various coins
dollar = amount/100;
amount = amount%100;
quarter = amount/25;
amount = amount%25;
dime = amount/10;
amount = amount%10;
nickel = amount/5;
penny = amount%5;
// Print results
if(dollar>=1)
{
if(dollar == 1)
{
cout<<dollar<<" dollar\n";
}
else
{
cout<<dollar<<" dollars\n";
}
}
if(quarter>=1)
{
if(quarter== 1)
{
cout<<quarter<<" quarter\n";
}
else
{
cout<<quarter<<" quarters\n";
}
}
if(dime>=1)
{
if(dime == 1)
{
cout<<dime<<" dime\n";
}
else
{
cout<<dime<<" dimes\n";
}
}
if(nickel>=1)
{
if(nickel == 1)
{
cout<<nickel<<" nickel\n";
}
else
{
cout<<nickel<<" nickels\n";
}
}
if(penny>=1)
{
if(penny == 1)
{
cout<<penny<<" penny\n";
}
else
{
cout<<penny<<" pennies\n";
}
}
}
return 0;
}
Donnell backed up the information on his computer every week on a flash drive. Before copying the files to the flash drive, he always ran a virus scan against the files to ensure that no viruses were being copied to the flash drive. He bought a new computer and inserted the flash drive so that he could transfer his files onto the new computer. He got a message on the new computer that the flash drive was corrupted and unreadable; the information on the flash drive cannot be retrieved. Assuming that the flash drive is not carrying a virus, which of the following does this situation reflect?
a. Compromise of the security of the information on the flash drive
b. Risk of a potential breach in the integrity of the data on the flash drive
c. Both of the above
d. Neither of the above.
Answer:
b. Risk of a potential breach in the integrity of the data on the flash drive
Explanation:
The corrupted or unreadable file error is an error message generated if you are unable to access the external hard drive connected to the system through the USB port. This error indicates that the files on the external hard drive are no longer accessible and cannot be opened.
There are several reasons that this error message can appear:
Viruses and Malware affecting the external hard drive .Physical damage to external hard drive or USB memory .Improper ejection of removable drives.Create a macro named mReadInt that reads a 16- or 32-bit signed integer from standard input and returns the value in an argument. Use conditional operators to allow the macro to adapt to the size of the desired result. Write a program that tests the macro, passing it operands of various sizes.
Answer:
;Macro mReadInt definition, which take two parameters
;one is the variable to save the number and other is the length
;of the number to read (2 for 16 bit and 4 for 32 bit) .
%macro mReadInt 2
mov eax,%2
cmp eax, "4"
je read2
cmp eax, "2"
je read1
read1:
mReadInt16 %1
cmp eax, "2"
je exitm
read2:
mReadInt32 %1
exitm:
xor eax, eax
%endmacro
;macro to read the 16 bit number, parameter is number variable
%macro mReadInt16 1
mov eax, 3
mov ebx, 2
mov ecx, %1
mov edx, 5
int 80h
%endmacro
;macro to read the 32 bit number, parameter is number variable
%macro mReadInt32 1
mov eax, 3
mov ebx, 2
mov ecx, %1
mov edx, 5
int 80h
%endmacro
;program to test the macro.
;data section, defining the user messages and lenths
section .data
userMsg db 'Please enter the 32 bit number: '
lenUserMsg equ $-userMsg
userMsg1 db 'Please enter the 16 bit number: '
lenUserMsg1 equ $-userMsg1
dispMsg db 'You have entered: '
lenDispMsg equ $-dispMsg
;.bss section to declare variables
section .bss
;num to read 32 bit number and num1 to rad 16-bit number
num resb 5
num1 resb 3
;.text section
section .text
;program start instruction
global _start
_start:
;Displaying the message to enter 32bit number
mov eax, 4
mov ebx, 1
mov ecx, userMsg
mov edx, lenUserMsg
int 80h
;calling the micro to read the number
mReadInt num, 4
;Printing the display message
mov eax, 4
mov ebx, 1
mov ecx, dispMsg
mov edx, lenDispMsg
int 80h
;Printing the 32-bit number
mov eax, 4
mov ebx, 1
mov ecx, num
mov edx, 4
int 80h
;displaying message to enter the 16 bit number
mov eax, 4
mov ebx, 1
mov ecx, userMsg1
mov edx, lenUserMsg1
int 80h
;macro call to read 16 bit number and to assign that number to num1
;mReadInt num1,2
;calling the display mesage function
mov eax, 4
mov ebx, 1
mov ecx, dispMsg
mov edx, lenDispMsg
int 80h
;Displaying the 16-bit number
mov eax, 4
mov ebx, 1
mov ecx, num1
mov edx, 2
int 80h
;exit from the loop
mov eax, 1
mov ebx, 0
int 80h
Explanation:
For an assembly code/language that has the conditions given in the question, the program that tests the macro, passing it operands of various sizes is given below;
;Macro mReadInt definition, which take two parameters
;one is the variable to save the number and other is the length
;of the number to read (2 for 16 bit and 4 for 32 bit) .
%macro mReadInt 2
mov eax,%2
cmp eax, "4"
je read2
cmp eax, "2"
je read1
read1:
mReadInt16 %1
cmp eax, "2"
je exitm
read2:
mReadInt32 %1
exitm:
xor eax, eax
%endmacro
;macro to read the 16 bit number, parameter is number variable
%macro mReadInt16 1
mov eax, 3
mov ebx, 2
mov ecx, %1
mov edx, 5
int 80h
%endmacro
;macro to read the 32 bit number, parameter is number variable
%macro mReadInt32 1
mov eax, 3
mov ebx, 2
mov ecx, %1
mov edx, 5
int 80h
%endmacro
;program to test the macro.
;data section, defining the user messages and lenths
section .data
userMsg db 'Please enter the 32 bit number: '
lenUserMsg equ $-userMsg
userMsg1 db 'Please enter the 16 bit number: '
lenUserMsg1 equ $-userMsg1
dispMsg db 'You have entered: '
lenDispMsg equ $-dispMsg
;.bss section to declare variables
section .bss
;num to read 32 bit number and num1 to rad 16-bit number
num resb 5
num1 resb 3
;.text section
section .text
;program start instruction
global _start
_start:
;Displaying the message to enter 32bit number
mov eax, 4
mov ebx, 1
mov ecx, userMsg
mov edx, lenUserMsg
int 80h
;calling the micro to read the number
mReadInt num, 4
;Printing the display message
mov eax, 4
mov ebx, 1
mov ecx, dispMsg
mov edx, lenDispMsg
int 80h
;Printing the 32-bit number
mov eax, 4
mov ebx, 1
mov ecx, num
mov edx, 4
int 80h
;displaying message to enter the 16 bit number
mov eax, 4
mov ebx, 1
mov ecx, userMsg1
mov edx, lenUserMsg1
int 80h
;macro call to read 16 bit number and to assign that number to num1
;mReadInt num1,2
;calling the display mesage function
mov eax, 4
mov ebx, 1
mov ecx, dispMsg
mov edx, lenDispMsg
int 80h
;Displaying the 16-bit number
mov eax, 4
mov ebx, 1
mov ecx, num1
mov edx, 2
int 80h
;exit from the loop
mov eax, 1
mov ebx, 0
int 80h
In this question, we give two implementations for the function: def intersection_list(lst1, lst2) This function is given two lists of integers lst1 and lst2. When called, it will create and return a list containing all the elements that appear in both lists. For example, the call: intersection_list([3, 9, 2, 7, 1], [4, 1, 8, 2])could create and return the list [2, 1]. Note: You may assume that each list does not contain duplicate items. a) Give an implementation for intersection_list with the best worst-case runtime. b) Give an implementation for intersection_list with the best average-case runtime.
Answer:
see explaination
Explanation:
a)Worst Case-time complexity=O(n)
def intersection_list(lst1, lst2):
lst3 = [value for value in lst1 if value in lst2]
return lst3
lst1 = []
lst2 = []
n1 = int(input("Enter number of elements for list1 : "))
for i in range(0, n1):
ele = int(input())
lst1.append(ele) # adding the element
n2 = int(input("Enter number of elements for list2 : "))
for i in range(0, n2):
ele = int(input())
lst2.append(ele) # adding the element
print(intersection_list(lst1, lst2))
b)Average case-time complexity=O(min(len(lst1), len(lst2))
def intersection_list(lst1, lst2):
return list(set(lst1) & set(lst2))
lst1 = []
lst2 = []
n1 = int(input("Enter number of elements for list1 : "))
for i in range(0, n1):
ele = int(input())
lst1.append(ele)
n2 = int(input("Enter number of elements for list2 : "))
for i in range(0, n2):
ele = int(input())
lst2.append(ele)
print(intersection_list(lst1, lst2))
The Monte Carlo (MC) Method (Monte Carlo Simulation) was first published in 1949 by Nicholas Metropolis and Stanislaw Ulam in the work "The Monte Carlo Method" in the Journal of American Statistics Association. The name Monte Carlo has its origins in the fact that Ulam had an uncle who regularly gambled at the Monte Carlo casino in Monaco. In fact, way before 1949 the method had already been extensively used as a secret project of the U.S. Defense Department during the so-called "Manhattan Project". The basic principle of the Monte Carlo Method is to implement on a computer the Strong Law of Large Numbers (SLLN) (see also Lecture 9). The Monte Carlo Method is also typically used as a probabilistic method to numerically compute an approximation of a quantity that is very hard or even impossible to compute exactly like, e.g., integrals (in particular, integrals in very high dimensions!). The goal of Problem 2 is to write a Python code to estimate the irrational number
Answer:
can you give more detail
Explanation:
Write a program that maintains a database containing data, such as name and birthday, about your friends and relatives. You should be able to enter, remove, modify, or search this data. Initially, you can assume that the names are unique. The program should be able to save the data in a fi le for use later. Design a class to represent the database and another class to represent the people. Use a binary search tree of people as a data member of the database class. You can enhance this problem by adding an operation that lists everyone who satisfi es a given criterion. For example, you could list people born in a given month. You should also be able to list everyone in the database.
Answer:
[tex]5909? \times \frac{?}{?} 10100010 {?}^{?} 00010.222 {?}^{2} [/tex]
For this problem, you will write a function standard_deviation that takes a list whose elements are numbers (they may be floats or ints), and returns their standard deviation, a single number. You may call the variance method defined above (which makes this problem easy), and you may use sqrt from the math library, which we have already imported for you. Passing an empty list to standard_deviation should result in a ZeroDivisionError exception being raised, although you should not have to explicitly raise it yourself.
Answer:
import math def standard_deviation(aList): sum = 0 for x in aList: sum += x mean = sum / float(len(aList)) sumDe = 0 for x in aList: sumDe += (x - mean) * (x - mean) variance = sumDe / float(len(aList)) SD = math.sqrt(variance) return SD print(standard_deviation([3,6, 7, 9, 12, 17]))Explanation:
The solution code is written in Python 3.
Firstly, we need to import math module (Line 1).
Next, create a function standard_deviation that takes one input parameter, which is a list (Line 3). In the function, calculate the mean for the value in the input list (Line 4-8). Next, use the mean to calculate the variance (Line 10-15). Next, use sqrt method from math module to get the square root of variance and this will result in standard deviation (Line 16). At last, return the standard deviation (Line 18).
We can test the function using a sample list (Line 20) and we shall get 4.509249752822894
If we pass an empty list, a ZeroDivisionError exception will be raised.
A cloud provider is deploying a new SaaS product comprised of a cloud service. As part of the deployment, the cloud provider wants to publish a service level agreement (SLA) that provides an availability rating based on its estimated availability over the next 12 months. First, the cloud provider estimates that, based on historical data of the cloud environment, there is a 25% chance that the physical server hosting the cloud service will crash and that such a crash would take 2 days before the cloud service could be restored. It is further estimated that, over the course of a 12 month period, there will be various attacks on the cloud service, resulting in a total of 24 hours of downtime. Based on these estimates, what is the availability rating of the cloud service that should be published in the SLA?
Answer:
99.6
Explanation:
The cloud provider provides the certain modules of the cloud service like infrastructure as a service , software as a service ,etc to other companies .The cloud provider implements a new SaaS service that includes a cloud platform also the cloud provider intends to disclose the Service Level Agreement that is score based on its approximate accessibility during the next 12 months.
The Cloud providers predict that, depending on past cloud system data, it is a 25 % risk that a physical server holding the cloud platform will fail therefore such a failure will require 2 days to recover the cloud service so 99.6 is the Cloud storage accessibility ranking, to be released in the SLA.
Zoom Vacuum, a family-owned manufacturer of high-end vacuums, has grown exponentially over the last few years. However, the company is having difficulty preparing for future growth. The only information system used at Zoom is an antiquated accounting system. The company has one manufacturing plant located in Iowa; and three warehouses, in Iowa, New Jersey, and Nevada. The Zoom sales force is national, and Zoom purchases about 25 percent of its vacuum parts and materials from a single overseas supplier. You have been hired to recommend the information systems Zoom should implement in order to maintain their competitive edge. However, there is not enough money for a full-blown, cross-functional enterprise application, and you will need to limit the first step to a single functional area or constituency. What will you choose, and why?
Answer:A TPS focusing on production and manufacturing to keep production costs low while maintaining quality, and for communicating with other possible vendors. The TPS would later be used to feed MIS and other higher level systems.
Explanation:
