Define electrolysis ​

Answer:   ionosphere

Explanation:       First it bounces off a top layer of the atmosphere called the ionosphere, then it bounces back to the Earth (this is reflection. It then bounces up again to the ionosphere, and continues bouncing back again until it reaches the radio receiver. This is called a skywave, which works around 3 to 30 MHz.

The final volume of the methane gas in the container is 6.67 L.

The given parameters;

The total number of moles of gas in the container is calculated as follows;

[tex]n_t = 0.12 + 0.182 = 0.302 \ mol[/tex]

The final volume of gas in the container is calculated as follows;

[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1 n_2}{n_1} \\\\V_2 = \frac{2.65 \times 0.302}{0.12} \\\\V_2 = 6.67 \ L[/tex]

Thus, the final volume of the methane gas in the container is 6.67 L.

Learn more here:https://brainly.com/question/21912477

Answer:

13.6 is the correct answer written in standard form.

Explanation:

1.36, move the decimal once to the right to get 13.6

Answer:

13.6

Explanation:

The standard form is 13.6

Answer:

Meiosis produces haploid cells (gametes), which contain single chromosomes, or on-half the number of chromosomes in diploid cells. When a sperm and an egg join, the single chromosomes pair up, which results in genetic diversity in the offspring

Answer:

The element X is sulfur.

Sulfur will gain 2 electrons to become an ion.

The charge of sulfide ion is (2-).

Explanation:

Explanation:

Oils are made up of long hydrocarbon chains which are non polar. Since water is a polar solvent oil doesn't dissolve in water well.( Polar solutes dissolve in polar solvents and non polar solutes dissolve in non polar solvents) The hydrocarbon chains are hydrophobic.

Answer:

Explanation:

Thin-layer chromatography (TLC) is a chromatography technique used to separate non-volatile mixtures. ... After the sample has been applied on the plate, a solvent or solvent mixture (known as the mobile phase) is drawn up the plate via capillary action.

Work is said to be done if the force applied to a body causes the body to move through a distance.

Student B used more work and power

Workdone = Force * Distance

For student A:

Force = 3N

distance = 5meters

Time taken = 10 secs

Workdone by Student A = 3 * 5

Workdone by student A = 15Nm

Power used up = workdone/time

Power used up = 15/10

Power used up = 1.5 Watts

For student B:

Force = 6N

distance = 5meters

Time taken = 5 secs

Workdone by Student A = 6 * 5

Workdone by student A = 30Nm

Power used up = workdone/time

Power used up = 30/5

Power used up = 6 Watts

This shows that student B used more work and power

Learn more here: https://brainly.com/question/6701368

Answer:

go get the stuff.

Explanation:

Answer:

we heat up because the component with lower boiling evaporates first,

leaving the other behind

This problem is describing the equilibrium whereby hydrofluoric acid decomposes to hydrogen and fluorine gases at 298 K whose equilibrium constant is 8.70x10⁻³, the equilibrium concentrations of all the reactants are both 1.33x10⁻³ M and asks for the initial concentration of hydrofluoric acid which turns out to be 2.86x10⁻³ M.

Then, we can write the following equilibrium expression for hydrofluoric acid once the change, [tex]x[/tex], has taken place:

[tex][HF]=[HF]_0-2x[/tex]

Now, since both products are 1.33x10⁻³ M we infer the reaction extent is also 1.33x10⁻³ M, and thus, we can calculate the equilibrium concentration of HF via the law of mass action (equilibrium expression):

[tex]8.70x10^{-3}=\frac{(1.33x10^{-3} M)^2}{[HF]} }[/tex]

[tex][HF]=\frac{(1.33x10^{-3} M)^2}{8.70x10^{-3}} }=2.03x10^{-4}M[/tex]

Finally, the initial concentration of HF is calculated as follows:

[tex][HF]_0=[HF]+2x=2.033x10^{-4}+2*(1.33x10^{-3})=2.86x10^{-3}M[/tex]

Learn more:

Answer:

d. 83 °c

Explanation:

Answer:

D. 83 c

Explanation:

took the test

Answer:

We can do an experiment with vinegar to see what happens to the calcium in an eggshell when it is exposed to an acid.

Explanation:

Carbon dioxide and water

I hope it helps

Answer:

The usual products of combustion reactions are carbon dioxide and water.

Explanation:

Combustion reaction is when a substance reacts with oxygen gas, resulting in a release of energy in the form of light and heat. Combustion reactions must have oxygen (O2) as one of the reactants.

From the information provided in the question, the second ionization energy of the metal is  578 kJ/mol.

From the question, we have the following information;

Lattice enthalpy of MO(s) = -2383 kJ/mol

Bond dissociation enthalpy of O2(g) = +498 kJ/mol

First electron affinity of O = -141 kJ/mol

Second electron affinity of O = +744 kJ/mol

First ionization energy of M = + 267 kJ/mol

Heat of sublimation of M = + 130 kJ/mol

Standard enthalpy of formation of MO(s) = -307 kJ/mol

Using Hess law of constant heat summation;

ΔHf = ΔHs + BE + ∑IE + ∑EA + U

ΔHs  = Heat of sublimation of metal

ΔHf = Heat of formation MO

BE = Bond energy of O2

∑EA  = sum of electron affinities of Oxygen

∑IE  = Sum of the ionization energies of M

U = Lattice energy of MO

Let the second ionization energy be x

Substituting values;

(-307) = 130 + 498 + (267 + x) + 603 + (-2383)

(-307) = -885 + x

-x =   -885 + 307

-x = -578

x = 578 kJ/mol

The second ionization energy of the metal is  578 kJ/mol.

Learn more: https://brainly.com/question/11155928

The pH of the standard hydrogen electrode that has electrode potential of -0.128 V  is 4.3.

The equation of the hydrogen electrode is;

2H^+(aq) + 2e ⇄ H2(g)

The standard electrode potential of hydrogen is 0.00 V

Using the Nernst equation;

Ecell = E°cell - 0.0592/n log Q

Now;

E°cell = 0.00 V

n = 2

Q = 1/[H^+]

-0.128 = 0.00 - 0.0592/2 log  1/[H^+]

-0.128 = 0.00 - 0.0296 log 1/[H^+]

 -0.128 =  - 0.0296 log 1/[H^+]

-0.128/  - 0.0296  =  log 1/[H^+]

1/[H^+] = Antilog (4.32)

[H^+] = 4.79 × 10^-5

Now;

pH = -log[H^+]

pH = -log (4.79 × 10^-5)

pH = 4.3

Learn more: https://brainly.com/question/11155928

Answer:

where is the question????????????

Diamond is composed of hexagonal rings in which sp3 hybridized carbon atoms are linked together.

Hybridization refers to the mixing of atomic orbitals to yield hybrid orbitals that are suitable for bonding. The energy of orbitals that combine to form hybrid orbitals must be close enough for such combination to take place.

Diamond is composed of hexagonal rings in which sp3 hbridized carbon atoms are linked together. Each carbon atom in diamond is tetrahedral.

Learn more: https://brainly.com/question/967776

The mixing of the two different orbitals to form a compound is called hybridization. For example mixing of s and p orbits.

The correct answer is sp3.

The arrangement of the elements in a different manner to form a new compound is called allotropes. For example, diamond and graphite are the allotropes of carbon.

The valence electrons are in p orbitals and p orbit mixed after the s orbitals.

Therefore, the correct answer is sp3

For more information, refer to the link:--

https://brainly.com/question/3523174

There are different ways of extraction. The best way to begin an extraction to separate the amine from the mixture is to extract with dilute NaOH.

NaOH is known to be the most common compound that is used to convert a carboxylic acid into its more water-soluble ionic carboxylate form.

But if  the mixture has a compound that you want, and that can react with NaOH, another milder base such as sodium bicarbonate is preferably used.

See full question below

A mixture of solids containing a ketone, a carboxylic acid, and an amine, are dissolved in DCM. What is the best way to begin an extraction in order to separate the carboxylic acid from the mixture?

A) Extract with dilute NaOH

B) Extract with dilute HCl

C) Extract with dichloromethane

D) Extract with water

Learn more from

https://brainly.com/question/2646724

Answer:

dinitrogen pentachloride

Answer:

Explanation:

First you will find the mole from the molarity and then the desired mass from the mole.

Answer:

from the words below underline six example of rhetorical patterns

Answer:

la primera va con la última

Answer:

›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element

Explanation:

If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.

Given Fe = 38.6 g.

Fe has a molar mass = 55.845 g/mol.

Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.

The reaction is described as Fe + Br2 FeBr2.

One mole Fe yields 1 mole of FeBr2.

FeBr2 would be produced from 0.6912 moles of Fe.

FeBr2 has a molar mass of 215.65 g/mol.

Moles of FeBr2 x Molar mass of FeBr2

= 215.65 g/mole x 0.6912 mole

= 149.06 g FeBr2 produced is the formula.

Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ2

Answer:

Explanation:

The actual boiling point is probably between 34C and 40C.

Temperature measures the average kinetic energy of particles of the substances. Therefore, the correct option is option D that is the actual boiling point is probably between 34°C and 40°C.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

The actual boiling point is probably between 34°C and 40°C.

Therefore, the correct option is option D.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

Answer:

composition of an element

Based on our knowledge of strong and weak acids, we can confirm that the Ka value for acetic acid will be relatively low since it is a weak acid.

Acids can be strong or weak. This is determined by its tendency to break apart into ions or stay together to form molecules. Although somewhat counter-intuitive, strong acids are those that are most likely to break apart and therefore contain a high number of ions within their solutions.

Weak acids, on the other hand, are those that tend to stay together in the form of molecules and therefore possess very low ion counts in their solutions. The acid dissociation constant, Kₐ, is used to measure whether an acid is weak or strong and how much so. In the case of Acetic acid, the ka measurement will offer a low value, indicating a weak acid.

To learn more visit:

https://brainly.com/question/4131966?referrer=searchResults

Answer:

Mass Number

Explanation:

In nuclear physics, the sum of the numbers of protons and neutrons present in the nucleus of an atom.

Please vote brainliest!

This problem is describing the equilibrium whereby the formartion of a complex is attained when 1.47 g of nickel(II) chloride is dissolved in 100.0 mL of ammonia so that the latter's equilibium concentration is 0.20 M. Thus, it is asked to calculate the equilibrium concentrations of both nickel(II) ions and that of the complex.

Firstly, we can write out the chemical equation to be considered:

[tex]Ni^{2+}+6NH_3\rightleftharpoons Ni(NH_3)_6^{2+}[/tex]

Next, we can calculate the initial concentration of nickel(II) ions by using the concept of molarity:

[tex][Ni^{2+}]=\frac{1.47gNiCl_2*\frac{1molNiCl_2}{129.6g}*\frac{1molNi^{2+}}{1molNiCl_2} }{0.1000L}=0.113M[/tex]

Afterwards, we set up an equilibrium expression for this chemical reaction:

[tex]Kf=\frac{[Ni(NH_3)_6^{2+}]}{[Ni^{2+}][NH_3]^6}[/tex]

Which can be written in terms of the reaction extent, [tex]x[/tex]:

[tex]Kf=\frac{x}{(0.113-x)(0.2)^6}[/tex]

Now, for the calculation of [tex]x[/tex], we plug in Kf, and solve for it:

[tex]1.2x10^9=\frac{x}{(0.113-x)(0.2)^6}\\\\1.2x10^9=\frac{x}{(0.113-x)(6.4x10^{-5})}\\\\7.68x10^4(0.113-x)=x\\\\x=0.112999 M[/tex]

Which is about the same to the initial concentration of nickel(II) ions because the Kf is too large.

Thus, the required concentrations at equilibrium are about:

[tex][Ni(NH_3)_6^{2+}]=0.113M[/tex]

[tex][Ni^{2+}]=0M[/tex]

Learn more:

The solubility of nitrogen gas in water is 1.90 mL/dL at 1.00 atm and 13.3 mL/dL at 7.00 atm.

We want to relate the solubility of a gas with its partial pressure.

We can do so using Henry's law.

Henry's law states that the amount of dissolved gas in a liquid is proportional to its partial pressure above the liquid.

C = k × P

where,

The solubility of nitrogen gas is 1.90 mL/dL of blood at 1.00 atm.

Since the solvent is basically water, we can understand that the concentration of nitrogen gas is 1.90 mL/dL at 1.00 atm.

We can use this information to calculate Henry's Law constant.

k = C/P = (1.90 mL/dL)/1.00 atm = 1.90 mL/dL.atm

We want to calculate the solubility of nitrogen gas at a pressure of 7.00 atm.

We will use Henry's law.

C = k × P = (1.90 mL/dL.atm) × 7.00 atm = 13.3 mL/dL

The solubility of nitrogen gas in water is 1.90 mL/dL at 1.00 atm and 13.3 mL/dL at 7.00 atm.

Learn more about solubility here: https://brainly.com/question/11963573