Define physical and chemical properties, provide three examples of each, discuss their reversibility, and explain the fundamental differences between them.

Answers

Answer 1

Answer:

Physical properties are defined as the properties which can be observed without changing its chemical composition.

For example: color, volume, and molecular weight.

Chemical properties are defined as the properties which can be observed only after changing chemical identity of the substance.

For example: reactivity, toxicity, and flammability.

The fundamental differences between physical and chemical properties are as follows:

Chemical properties are related to chemical bonds of the substance while physical properties are not.

In chemical properties, chemical identity of substance changes while physical properties do not have any change.

Chemical properties predict the reaction of substance while physical properties only describe the appearance of the substance.

Explanation:

Answer 2

Answer:

A measurable property that can be observed typically and explains any matter or organism's appearance and physical behavior is called a physical property. Examples of physical properties are appearance, boiling point, freezing point, melting point, colors, odor, mass, density, solubility. Properties that are only observed during a reaction or change in the composition of a matter is called a chemical property. These properties describe the internal part of anything and explain how it behaves when reacted with other chemical substances. Examples are enthalpy, entropy, reactivity, flammability, oxidation state, acidity, basicity. Some physical properties are reversible or sometimes irreversible. Like the change of states of matter is reversible, and the growth of an organism is irreversible. The same thing with the chemical properties. There are reversible chemical reactions(formation of ammonium chloride) and irreversible chemical reactions. (burning of a chemical substance). After knowing all about these properties, the most fundamental difference is that the physical properties can be measured without any chemical change in them. But a chemical property is measurable when the substance goes through a chemical reaction.

Explanation:


Related Questions

Which of the following molecules contains six bonding electrons?
A C2H4
B CO2
C H2S
D NCl3

Answers

Answer:

c2h4 (etthane........

bexcuse it has 6 bond of hydrogen

C₂H₄ molecules contains six bonding electrons. Therefore, option A is correct.

What do you mean by the term bonding ?

Chemical bonding is the process through which two or more atoms, molecules, or ions establish a chemical link to create a chemical compound. The atoms in the resultant molecule are held together by these chemical bonds.

Chemical bonds have three basic characteristics that must be taken into account: their strength, length, and polarity. The distribution of electrical charge among the atoms connected by a bond determines its polarity.

C₂H₄ molecules has six bonding electrons. This molecule is called as Ethylene. When bonding is done between two atoms, each atom shares a pair of electrons with each other.

Hence, for every one bond, two electrons are shared between two atoms

Thus, option A is correct.

To learn more about the bonding, follow the link;

https://brainly.com/question/10777799

#SPJ6

Convert 48,987 minutes to years
using the method of dimensional analysis

Answers

Answer:

Explanation:

48000 minutes [ 1 hour  / 60 min ] 1 day / 24 hours ] [365 days / year]

48000 * [ 1/(60 * 24 * 365)]

48000 * [1 / 525600]

There are 0.0930954years in 48000 minutes

Please help I have been stuck on this problem for a couple hours and can't figure it out

Answers

Answer:

11.92 Liters O₂(g) at STP

Explanation:

For most stoichiometry problems, if one will convert all given data into moles, solve by rxn ratios, then finish by converting to needed dimensions to complete problem.

2Pb(NO₃)₂ => 2PbO + 4NO₂ + O₂

Given 237.5 grams PbO formed in reaction = 237.5 g/223.2 g/mole = 1.064 mole PbO

From equation ratios, moles O₂ formed = 1/2(moles PbO) = 1/2(1.064 moles O₂) = 0.532 mole O₂

0.532 mole O₂ = 0.532 mole x 22.4  liters/mole at STP = 11.91756272 liters (calculator answer) ≅ 11.92 liters O₂ at STP (4 sig.figs. based on given 237.5g PbO)

Can someone plz help me :<

Answers

Answer: cats r alliens because they r kind of like ufos they would usually wonder around rather u know it or not when they spy on us it could b with us sleep cooking anything so they r like aliens

Explanation:

I need help with b) c) and what is the electronic configuration of atom E

Answers

Answer:

(b) A and C belongs to same group.

(c) D is a non metal.

Explanation:

The Electronic Configuration of E is

[tex]1s {}^{2} 2s {}^{2}2p {}^{6} 3s {}^{2} 3p {}^{6} 4s {}^{2} [/tex]

why does an endothermic reaction require a greater activation energy than an exothermic one?​

Answers

Answer:

in most of the endothermic reactions the atoms gains electrons from one to another. since the atom gains electrons there is a electron repulsive force between the host and the guest electron . As stability is inversely proportional to electron repulsive force the atom gains energy to attain stability .

The endothermic reaction mostly come under electron affinity

Explanation:

hope this helps you

if  I am wrong just correct me

Formal charge is calculated by assigning each atom _____ the bonding electrons that it shares. Oxidation number is determined by assigning all the shared electrons of a particular bond to the atom with the _____ electronegativity. Multiple choice question. half; higher half; lower all; lower all; higher

Answers

Answer:

A). half, higher

Explanation:

The Formal charge is elaborated as the 'allocated charge to a molecules' atom' on the basis of the assumption that the electrons present in the chemical bond are equally split among the atoms. It is estimated by 'halving the no. of bonding electrons that encircle the atom.

While Oxidation number is characterized as the 'hypothetical charge of an atom that is present within a molecule.' It is also defined as 'the actual number of lost or gained electrons or the rate at which the electrons are gained or lost by an atom to develop a chemical bond along with the other atom.' It is calculated by allocating or sharing the electrons having the higher electronegativity belonging to a specific bond with the other. Thus, option A is the correct answer.

If a pile of a deson of Buttons has a height of 2cm 4mm, what is the thickness of one to button.​

Answers

The thickness of one button will be 2mm

According to this question, a pile of a dozen buttons has a height of 2cm 4mm. A dozen means 12, hence, 12 buttons has a height of 2cm 4mm.

* N.B: We convert the height of the 12 buttons to same unit (mm)

Since 1cm = 10mm

Then, 2cm = 2 × 10 = 20mm

20mm + 4mm = 24mm

That is, twelve buttons (a dozen) has a thickness of 24mm, one button will therefore, be:

24/12 = 2mm thick

Hence, one button is 2mm thick.

Learn more at: https://brainly.com/question/3183250

Which equation describes a physical change? i. H2O(s) ⟶ H2O(l) ii. Na+(aq)+Cl−(aq) +Ag+(aq)+NO3−(aq) ⟶ AgCl(s)+Na+(aq)+NO3−(aq) iii. CH3OH(g)+O2(g) ⟶ CO2(g)+H2O(g) iv. 2H2O(l) ⟶ 2H2(g)+O2(g) v. H+(aq)+OH−(aq)⟶ H2O(l)

Answers

Answer:

The answer is "Option i"

Explanation:

In this question, only option (i) is correct, and others were wrong which can be defined as follows:

In option (ii):

[tex]Na^+\ (aq)+Cl^- \ (aq) +Ag^+ \ (aq)+NO_3^- \ (aq) \to AgCl\ (s)+Na^+ \ (aq)+NO_3^-\ (aq) \\\\[/tex]

It is the complete ionic equation.

In option (iii):

[tex]CH_3OH\ (g)+O_2\ (g) \to CO_2\ (g)+H_2O\ (g)[/tex]

It is the combustion reaction but a not balanced equation.

In option (iv):

[tex]2H_2O\ (l) \to 2H_2\ (g)+O_2\ (g)[/tex]

It is the  decomposition equation.

In option (v):

[tex]H^+\ (aq) +OH^-\ (aq)\to H_2O\ (l)[/tex]

It is the complete ionic equation.

Which of the following is true of science? (2 points)
It can be disproven by philosophy and religion.
It does not change after new evidence is discovered.
It is based on the personal opinions of scientists.
It is based on testable and replicable evidence.

Answers

Answer:

It is based on testable and replicable evidence.

Mercury poisoning is a debilitating disease that is often fatal. In the human body, mercury reacts with essential enzymes leading to irreversible inactivity of these enzymes. If the amount of mercury in a polluted lake is 0.4 Hg/mL, what is the total mass in kilograms of mercury in the lake

Answers

Answer:

The total mass of mercury in the lake is 631,542.7 kg

Explanation:

Question: The given dimensions of the lake as obtained from a similar question posted online are;

The surface area of the lake, A = 100 mi²

The lake's average depth, d = 20 ft.

The concentration of the mercury, C = 0.4 μg Hg/mL = 0.4 × 10⁻⁶ kg Hg/L

Therefore, we have;

The volume of water mixture in the lake, V = A × d

∴ V = 100 mi² × 20 ft. = 2,787,840,000 ft.² × 20 ft. = 55,756,800,000 ft.³

1 ft³ = 28.31685 L

∴ 55,756,800,000 ft.³ = 55,756,800,000 ft.³ × 28.31685 L/ft.³ = 1.57885675 × 10¹² L

The total mass of mercury in the lake, m = C × V

∴ m = 0.4 × 10⁻⁶ kg Hg/L × 1.57885675 × 10¹² L = 631,542.7 kg

The total mass of mercury in the lake, m = 631,542.7 kg.

Question 10 of 10 A certain seed is surrounded by a sticky coating. It is fairly dense and does not float in water. How is this seed most likely spread?
A. It is dispersed by the wind, and it sprouts after it falls to the ground
B. It drops to the bottom of a body of water, where it sprouts.
C. It attaches to the fur of an animal, and it sprouts after it falls from the animal's fur.
D. Animals eat it, and it is deposited in their waste. ​

Answers

The answer is C

It attaches to the fur of an animal, and it sprouts after it falls from the animal’s fur.

Classify the crystalline solids

full answer​

Answers

crystalline solids are the type of solid which have long term arrangement of particle

they have sharp melting and boiling point

Answer:

OMG wow thankyou so so so much for the thanks ( ◜‿◝ )♡

Plsss help with this ASAP TT

Answers

Answer: lithium- 3 protons, 3 electrons, 3 neutrons

Oxygen- nucleon no. 16, Atomic no. 8, 8 protons, overall charge (-2)

Sorry I don't the others. Hope this helps

write an importance of endothermic reactions​

Answers

Answer:

the uses of exothermic reactions are:

1) lighting of stove

2) self heating cans

3) hand warmers

4) in some case exothermic process can be used to cook food such as rice  (by adding calcium oxide to water heat is evolved and it helps to cook food )

Explanation:

hope this helps you pls mark me as brainilst

Which kind of bond would occur between sodium (Na, Group IA) and chlorine (Cl, Group VIIA)?

Answers

Answer:

ionic

Explanation:

I'll put the rest if the answers in comments

Answer:

1. Metallic bonds are responsible for many properties of metals, such as conductivity. Why is this possible?

*The bonds can shift because valence electrons are held loosely and move freely.*

2. Between which types of elements do ionic bonds occur, and how do electrons act within the bond?

*metals and nonmetals, electrons transferred*

3. Which kind of bond would occur between sodium (Na, Group IA) and chlorine (Cl, Group VIIA)?

*ionic*

4. Which type of bond and how many bonds would occur as carbon dioxide (CO2) is formed from carbon in Group IVA and oxygen in Group VIA?

*four covalent bonds*

5. How many covalent bonds is nitrogen (Group 5A) likely to form?

*three*

These are all the answers to the Bonds Quick Check.

Tenemos una disolución de HNO3 cuya pureza es del 65% y tiene una densidad de 1.32 g/mL. ¿Cuál es la molaridad de la disolución? PM HNO3 = 63.0 g/mol.

Answers

Teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, la molaridad de la disolución de HNO₃ es 14.67 [tex]\frac{mol}{L}[/tex].

El porcentaje en masa o en peso de una disolución es el número de gramos de soluto que hay por cada 100 gramos de disolución.

Entonces una pureza de 65% indica que hay 70 g de HNO₃ puro por cada 100 g de HNO₃ impuro.

Por otro lado, la densidad es la relación entre el peso o masa de una sustancia y el volumen que ocupa esa misma sustancia.

Entonces, si la disolución de HNO₃ tiene una densidad de 1.32 g/mL (equivalente a 1320 g/L), donde la cantidad de masa es impura, se puede obtener la cantidad de masa de HNO₃ presente 1 L de la solución mediante el siguiente cálculo:

[tex]\frac{1320 g HNO_{3} impuro}{1 L}x \frac{70 g HNO_{3}puro}{100 g HNO_{3}impuro}= 924 \frac{g HNO_{3}puro}{L}[/tex]

Finalmente, la masa molar de HNO₃, es decir la masa presente en un mol de la sustancia, es 63 [tex]\frac{g}{mol}[/tex].

Entonces, teniendo en cuenta que la molaridad es el número de moles de soluto que están disueltos en un determinado volumen, es posible determinar la molaridad como:

[tex]\frac{924 g HNO_{3}puro}{L}* \frac{1 mol}{63 g}= 14.67 \frac{mol}{L}[/tex]

En resumen, la molaridad de la disolución es 14.67 [tex]\frac{mol}{L}[/tex]

Aprende más sobre la molaridad:

https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResults

Is water the only liquid? If not, name 5 more

Answers

Answer:

Is water the only liquid? If not, name 5 more

Water, ethanol, household bleach, blood, paint, milk, gasoline, mineral oil, acetone and butyl alcohol are examples of liquids. Liquids' properties allow them to flow or be poured easily into containers, lava

water is not the only liquid.

Answer:

apple juice, milk, smoothie, blood, urine

For each pair (4), choose the stronger bond:

1. H–F (single bond) or H–Cl (single bond)
2. C–C (single bond) or C=C (double bond)
3. F–F (single bond) or H–F (single bond)
4. O=O (double bond) or C=C (double bond)

Answers

Answer:

line 3

Explanation:

let me know if you have any questions

What is the correct equilibrium constant expression for the following reaction?
2NCl3(g) Û N2g) + 3Cl2g

Answers

Answer:

K = [N2] [Cl2]³ / [NCl3]²

Explanation:

The equilibrium expression, K, of a reaction:

aA + bB ⇄ cC + dD

Is defined as the ratio between the multiplication of concentrations of products powered to its reaction coefficient and the multiplication of concentrations of reactants powered to its reaction coefficient as follows:

K = [C]^c[D]^d / [A]^a[B]^b

Now, for the reaciton:

2NCl3 ⇄ N2(g) + 3Cl2(g)

K is:

K = [N2] [Cl2]³ / [NCl3]²

what is chemistry?????​

Answers

Answer:

chemistry - the science that studies the properties of substances and natural fenomens .

...........

Answer:

The Basic definition of Chemistry is:-

Chemistry is the scientific study of the properties and behavior of matter. It is the natural science that covers the elements that make up matter to the compounds that is composed of atoms, molecules and ions.

for every __sodium ions transported ___postassium ions are transported

Answers

Answer:

In fact, in many neurons three sodium ions are transported for every potassium ion; sometimes the ratio is three sodium ions for every two potassium ions, and in a few neurons it is two sodium ions for one potassium ion.

Why doesn’t the KHP concentration have to be exactly 0.100M? Explain using complete sentences.

Answers

Answer:

The answer is in the explanation.

Explanation:

The KHP is an acid used as standard in titrations to find concentration of bases as NaOH.

The reaction that explain this use is:

KHP + NaOH → KNaP + H2O

where 1 mole of KHP reacts per mole of NaOH

That means, at equivalence point of a titration in which titrant is NaOH, the moles of KHP = Moles of NaOH added

With the moles of KHP = Moles of NaOH and the volume used by titrant we can find the molar concentration of NaOH.

The moles of KHP are obtained from the volume and the concentration as follows:

Volume(L)*Concentration (Molarity,M) = moles of KHP

If the concentration is more or less than 0.100M, the moles will be higher or lower. For that reason, we need to know the concentration of KHP but is not necessary to be 0.100M.

WILL MARK BRAINLIEST IF YOUR ANSWER IS CORRECT

Answers

Answer:

1. Element

2. Compound

3. Heterogeneous mixture

4. Homogeneous mixture

5. Homogeneous mixture

6. Heterogeneous and homogeneous mixture

7. Homogeneous mixture

8. Heterogeneous mixture

sodium chloride + water = ?
which product will it form,and in which phase is it?

Answers

Water molecules pull the sodium and chloride ions apart, breaking the ionic bond that held them together.

Must click thanks and mark brainliest

please answer correctly.

Answers

Answer: i dont know but yu got it

Explanation:

Noble gases are the least reactive elements on the periodic table.
A. True
B. False

Answers

The answer is A. True

Answer:

The statement is True!

"Why?"

The Noble Gases have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.

Hope this helps!

PLZ HELP ME

Which of these is an example of an example factor which affects the earths climate?
A - Decrease in the suns energy.
B - Warm and cold ocean currents.
C - Increase in atmospheric dioxide.
D - Release of dust during volcanic eruption

Answers

Answer:

D- Release of dust during volcanic eruption

Explanation:

During major explosive eruptions huge amounts of volcanic gas, aerosol droplets, and ash are injected into the stratosphere. Injected ash falls rapidly from the stratosphere -- most of it is removed within several days to weeks -- and has little impact on climate change. But volcanic gases like sulfur dioxide can cause global cooling, while volcanic carbon dioxide, a greenhouse gas, has the potential to promote global warming.

answer:

a - decrease in the suns energy.

explanation:

although the other options do discuss climate, temperature, etc., the sun DIRECTLY influences the earth's climate and would most likely affect it on a larger scale. for example, warm and cold ocean currents would affect the temperature of the ocean and could touch bay cities or islands, but they would not dictate the overall climate of the earth :)

♡ hopefully my reply helped you come to an answer~ please keep in mind that my response is purely that... MY response! i still have lots to learn, so please correct/educate me if you have found otherwise ♡

why do we shake syrup medicines before drinking​

Answers

Answer:

The label may instruct you to shake a liquid medicine before using so that the active ingredients are evenly distributed throughout it.

Explanation:

Answer:

maybe because if somehow the liquids get separated then shaking them up would mix them back to how they are suppose to be originally.

Explanation:

How many g of water are required to be mixed with 11.75 g of HgCl in order to make a 0.01 m solution? (Refer to the periodic table for atomic weights.)
a.) 40 g
b.) 5,000 g
c.) 2 x 10^8 g
d.) 2 x 10^6 g



The general name for a substance added to a reaction that affects the rate but is not consumed in the reaction is called a_____.

a.)constituent
b.)catalyst
c.)complex
d.)reactant


The action of a catalyst can be explained in the following manner:

a.) The catalyst makes it possible for the reaction to take place by another path that makes possible reaction at a lower energy.
b.) The catalyst takes no part in the reaction but serves as a buffer between reactants and products.
c.) The catalyst prevents the reverse reaction.

d.) The catalyst lowers the temperature of the reactants.


The energy level necessary to enable a reaction to occur is called the_____ energy.

a.) potential
b.) kinetic
c.) activation
d.) nuclear


Raising the temperature of a reacting system increases the rate of the reaction, but does NOT increase the:

a.) number of collisions
b.) average velocity of the reacting particles
c.) activation energy
d.) vibrational motions within the molecules
e.) fraction of the reacting particles which possess energies greater than the activation energy

Answers

Answer:

5,000 g

b.)catalyst

The catalyst makes it possible for the reaction to take place by another path that makes possible reaction at a lower energy.

activation

activation energy

Explanation:

Formulae for molality = number of moles of solute/mass of solvent in kilograms

Number of moles of solute= 11.75g/236 g/mol = 0.0498 moles

0.01 = 0.0498/x

x= 0.0498/0.01

x= 5 Kg or 5000 g

A catalyst refers to any substance that alters the rate of reaction but remains unaffected at the end of the reaction. The catalyst lowers the activation energy of a reaction.

For a chemical reaction to occur, the substances participating in that reaction must possess energy which is greater than the activation energy of the reaction. The activation energy is a sort of energy barrier between reactants and products which must be surmounted before a reaction can take place.

When the temperature of a reaction system is raised, the molecules move faster and the number of effective collisions in the system increases. However, raising the temperature does not raise the activation energy of the system.

Other Questions
Which of the following reasons is why spent fuel rods are stored in a pool of water?AnswersA.Water recovers useful energy from the continuing reaction.B.Water increases the speed of the chain reaction in the fuel rods.C.Water acts as a radiation shield to reduce the radiation levels.D.Water dissolves the nuclear waste in the rods so it is easier to handle. A cylindrical paint can has a diameter of 12 centimeters and height of centimetrs which is closest to the volume of the paint can in cubic centimeters different types of computer and state the major difference between them Find a least-squares solution of A by (a) constructing the normal equations for and (b) solving for . A , a. Construct the normal equations for . nothing nothing (Simplify your answers.) b. Solve for . Which is true of televangelists?A. They generally opposed government positions.B. They preached using mass communication.C. They supported the hippie counterculture.D. They never asked for money. 19.This/ Mai / her/ name/ is /my / is / mom.A. my name is mom this is my her MaiB. This is my mom name Mai my is her.C. This is my mom her name is Mai. advantages of profit maximization write a letter on why you did not complete your assignment with balanced chemical equations, show the different stages of fermentation Can someone answer the question I uploaded yesterday, subject is social studies. All you have to do is read an article and answer questions. Giving brainliest. How can you tell your guy friend that you want to me just friend. But what you say to him? What response will you give him? describe the kinds of verb Find the number in which 9 has greater value.0.56895.689056.89569.80 Which of the following statements is correct concerning the class of reactions to be expected for benzene and cyclooctatetraene?A) Both substances undergo addition reactions.B) Both substances undergo substitution reactions.C) Benzene undergoes addition; cyclooctatetraene undergoes substitution.D) Benzene undergoes substitution; cyclooctatetraene undergoes addition. PLS HELP Let f(x) = -2x - 7 and g(x) = -4x + 6. Find (g o f) (-5)635926 khi nim giao tip trong t chc Please help please !!!! true or false?help me please Each day past the winter solstice the noon sun is a little higher above the southern horizon. a. Determining how much change takes place each day at your latitude. solution.b. Does the amount of change take place at each latitude in the Northern Hemisphere? Explain. 5. There are 5,280 feet in a mile. What part of a mile, in decimal form, will you drive until you reach the exit? I NEED THIS QUICK PLZ HELP ILL GIVE YOU 30