describe one displacement reaction that is useful and explain why it is useful​

The empirical formula is the simplest formula of a chemical compound.

To find the empirical formula, we take the following steps;

1) O - 88.10/16,      H - 11.190/1

  O - 5.5,               H - 11.19

  O - 5.5/5.5,        H - 11.19/5.5

  O -  1,                 H - 2

Empirical formula = OH2

2) C - 41.368/12  H - 8.101/1,   N - 32.162/14,   O - 18.369/16

   C - 3,               H - 8,           N - 2,                  O - 1

   C - 3/1,            H - 8/1          N - 2/1                 O - 1/1

    C - 3,             H - 8,           N - 2,                   O - 1

Empirical formula = C3H8N2O

To obtain the molecular formula where n = number of atoms of each element;

Molecular weight = 174.204 g/mol

[ 3(12) + 8(1) + 2(14) + 16]n = 174

n= 174/88

n = 2 (to the nearest whole number)

Hence, we have;

[C3H8N2O]2

The molecular formula is C6H16N4O2

3)  C - 19.999/12,  H - 6.713/1,   N - 46.646/14,   O - 26.641/16

    C - 2,                H - 7,            N -  3,                 O - 2

    C - 2/2,            H - 7/2,         N -   3/2,             O - 2/2

    C - 1,                H - 4,            N -  2,                  O - 1

Empirical formula - CH4N2O

https://brainly.com/question/1363167

Explanation : số mol glucose 3.8M là :

n = Cm . V = 3.8 . 25 =95

=> Cm khi pha loãng = [tex]\frac{n}{V}[/tex] = [tex]\frac{95}{250}[/tex] = 0.38M

According to molar concentration, the  concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of 2 solutions given it is calculated as M₁V₁=M₂V₂,on substitution, M₂=3.8×25/250=0.38 M.

Thus,  the  concentration of a solution formed by diluting 25.0 ml of a 3.8 M glucose solution to 250 ml is 0.38 M.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ5

The reaction between H2SO4 in a mixture of KI and MnO2 yields iodine which reacts with hypo solution​ by titration and the iodine is decolorized.

Iodine is decolorized.

The first reaction stated in the question occurs as follows;

2 KI (aq) + 2 H2SO4 (aq) + MnO2 (s) → MnSO4 (aq) + K2SO4 (aq) + I2 (s) + 2 H2O (l)

The reaction here is the formation of iodine from MnO2 and KI in the presence of dropwise H2SO4.

Hypo is the common name of sodium thio-sulphate or sodium hypo-sulfite.

The equation of the titration reaction is;

2Na2S2O3 + I2→ Na2S4O6 + 2NaI

When this reaction takes place, iodine is decolorized due to its reduction to I^-.

For more information see https://brainly.com/question/16857360

Answer: 1.86*10^-7M

Explanation:

Answer:

B. 1.86 x 10^-7 M

Explanation:

Explanation:

freezing point depression is a phenomenon that describes why adding a solute or solvent results in the lowering of the freezing point of the solvent

Answer:

B. Protons and Neutrons

Answer:

Option"B" is correct.

MARK ME BRAINLISTS

Answer:

In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not. However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed.

Answer:

1;1, 2;1, 3;1, 1;2, 1;1, 3;2, 1;3, 2;3, 1;1.

I hope this will help.

Answer:

This is what the answer looks like

Explanation:

Answer:

C 760 mm of hg

because this is the atmospheric pressure at sea level

Explanation:

here's the answer to your question

Answer:

Potentials of any other electrodes are compared with that of the standard hydrogen electrode at the same temperature. Hydrogen electrode is based on the redox half cell: 2 H+(aq) + 2 e− → H2(g)..

Answer:

which energy?........

Explanation:

..........................

........

....

Answer:

Metals on the left of the Periodic Table.

Non-Metals on the top-right, plus Hydrogen.

The correct lewis structure of methane(CH4)

C. H:C:H:H

Answer:

16 g

Explanation:

Step 1: Write the balanced equation

2 Na + Cl₂ ⇒ 2 NaCl

Step 2: Identify the limiting reactant

The theoretical mass ratio (TMR) of Na to Cl₂ is 46:71 = 0.65:1.

The experimental mass ratio (EMR) of Na to Cl₂ is 10:10 = 1:1.

Since EMR > TMR, Cl₂ is the limiting reactant

Step 3: Calculate the mass of NaCl produced

The theoretical mass ratio of Cl₂ to NaCl is 71:117.

10 g Cl₂ × 117 g NaCl/71 g Cl₂ = 16 g NaCl

Answer:

"Endothermic reaction: In an endothermic reaction, the products are higher in energy than the reactants. Therefore, the change in enthalpy is positive, and heat is absorbed from the surroundings of the reaction."

Explanation:

When enthalpy is positive and delta H is greater than zero, this means that a system absorbed heat. This is called an endothermic reaction. When enthalpy is negative and delta H is less than zero, this means that a system released heat. This is called an exothermic reaction.

The sign of q for an endothermic process is positive because the system is gaining heat. A chemical reaction or physical change is exothermic if heat is released by the system into the surroundings. Because the surroundings are gaining heat from the system, the temperature of the surroundings increases.

Learn more about the endothermic reaction here: brainly.com/question/6506846

#SPJ2

Answer:

1 Ca(NO3)2

Calcium- Ca, Valency 2

Nitrate- NO3, Valency 1

AFTER CRISS CROSS:

Ca1(NO3)2

Ca(NO3)2

2 sodium bicarbonate = NaHCO3

Na = Sodium = (Na)+

HCO3 = bicarbonate = (HCO3) -

Na HCO3

3 magnesium   nitrite

   +2                 _ 1

Mg2(NO3)2

4 Na    Cl

    +1    _1

formula NaCl

5 hydrogen         sulphide  

H                       SO4

+1                       _2

formula H2SO4

6  H    Cl

  +1     _1

HCl

7 AL2     HSO4

  +2        -2

AL2(HSO4)3

8  NH4   Cl

   +1      _1

NH4Cl

9 NH4     SO4

  +1           _2

(NH3)2SO4

10  H   NO3

    +1    _1

HNO3

Answer:

i is the correct answer.

Explanation:

the RAM of aluminum is indeed 27. And since the RAM of substances are measured in terms of the C-12 isotope then R indeed explains why the RAM Al is 27.

Answer:

for volume only liters can be used

Explanation:

Answer:

7.2

Explanation:

you first have to find the number of moles of nitrogen dioxide by using the number of moles for calcium nitrate and the mole to mole ratios

number of moles of calcium nitrate=mass/mm

=16.4/102

=0.16g/mol

then you use the mole to mole ratios

2 : 4

0.16: x

2x/2=0.64/2

x=0.32g/moles of nitrogen dioxide

then you use the formula for the volume

v=22.4n

=22.4×0.32

=7.2

I hope this helps

Answer: A reaction element are those elements that can take part in a chemical reaction.

Explanation:

An element is made up of atoms that has the same atomic number. It is the basic material of which all matter is composed of. These elements cannot be broken down further into smaller substances by any chemical reaction. Each element has a unique number of protons in its atom. For example,

--> a hydrogen atom has 1 proton,

--> a Helium atom has 2 protons,

--> a Lithium atom has 3 protons, and

--> a carbon atom has 6 protons.

A chemical reaction on the other hand involves rearrangement of the constituent atoms of reactants to create different substances as products. The bonds between atoms are either broken or created to form new molecules. There are different types of chemical reaction which includes:

--> Decomposition reaction

--> Neutralization reaction

--> single displacement reaction and

--> combustion reaction.

Answer:

Below!

Explanation:

Isotopes are elements with a similar chemical makeup and the same atomic number, but a different atomic mass and number of neutrons . An example of this would be carbon-12, carbon-13, and carbon-14. Three isotopes of the element carbon that have the same 6 protons but have a different neutron count. A simple way to explain isotopes would be to say that they are just different "versions" of an element.

Hope this helps ya! Best of luck <3

1 meter = 1000 km

2500 meter = 2500/1000 km

= 2.5 km

The steps involved in the manufacture of sulphuric acid by contact process:

(1) Sulphur (or iron pyrites) are burnt in air to form sulphur dioxide.

  S+O2→SO24FeS2+11O2→2Fe2O3+8SO2

(2) Catalytic oxidation of sulphur dioxide to sulphur trioxide.

  2SO2+O2V2O52SO3ΔrHo=−196.6kJ

The reaction is reversible and exothermic.

(3) Sulphur trioxide is dissolved in 98% sulphuric acid to form oleum (fuming sulphuric acid). 

  SO3+H2SO4→H2S2O7

(4) Oleum is diluted with water to form sulphuric acid of desired concentration.

    H2S2O7+H2O→2H2SO4

            and

Manufacture of H2SO4 by contact process involves three steps:

1. Burning of sulphur in air to generate SO2.

2. Conversion of SO2 to SO3 by oxidation with air in the presence of 

Answer:

The distance covered by the body per unit time is called speed.

A distance travelled by the body per unit time in a fixed direction is called velocity

I hope this help u:)

Answer:

Force is an external agency that changes or tends to change the state of a body from rest to motion or from motion to rest is called force

Explanation:

The distance covered by a body in a unit time is called speed