Determine the type of alcohol corresponding to each given description or name. 1-pentanol 3-ethyl-3-pentanol 2-hexanol An alcohol with two other carbons attached to the carbon with the hydroxyl group_____.An alcohol with one other carbon attached to the carbon with the hydroxyl group____.An alcohol with three other carbons attached to the carbon with the hydroxyl group____.

Answer:

[tex]\boxed {\boxed {\sf 0.757 \ atm}}[/tex]

Explanation:

We are asked to find the pressure of a gas given a change in volume. Since the temperature remains constant, we are only concerned with volume and pressure. We will use Boyle's Law, which states the volume is inversely proportional to the pressure. The formula for this law is:

[tex]P_1V_1= P_2V_2[/tex]

Initially, the oxygen gas occupies a volume of 18.7 liters at a pressure of 1.19 atmospheres.

[tex]1.19 \ atm * 18.7 \ L = P_2V_2[/tex]

The gas expands to a volume of 29.4 liters, but the pressure is unknown.

[tex]1.19 \ atm * 18.7 \ L = P_2 * 29.4 \ L[/tex]

We are solving for the new pressure, so we must isolate the variable [tex]P_2[/tex]. It is being multiplied by 29.4 liters. The inverse operation of multiplication is division. Divide both sides of the equation by 29.4 L.

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =\frac{ P_2 * 29.4 \ L}{29.4 \ L}[/tex]

[tex]\frac {1.19 \ atm * 18.7 \ L}{29.4 \ L} =P_2[/tex]

The units of liters cancel.

[tex]\frac {1.19 \ atm * 18.7 }{29.4 } =P_2[/tex]

[tex]\frac {22.253}{29.4 } \ atm = P_2[/tex]

[tex]0.7569047619 \ atm =P_2[/tex]

The original measurements all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place. The 9 in the ten-thousandth place to the right of this place tells us to round the 6 up to a 7.

[tex]0.757 \ atm \approx P_2[/tex]

The pressure of the gas sample is approximately 0.757 atmospheres.

According to Boyle's law, for a given mass of ideal gas, pressure of gas is inversely proportional to the volume of gas, Provided the Temprature remains constant.

[tex]\implies \sf P_1 V_1 = P_2 V_2 \\ [/tex]

[tex]\implies \sf 1.19 \times 18. 7= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf 22.253= P_2 \times 29.4 \\[/tex]

[tex]\implies \sf P_2 = \dfrac{22.253}{29.4} \\[/tex]

[tex]\implies \underline{ \red{\boxed{ \bf P_2 \approx0.756 \: atm }}} \\[/tex]

Answer:

the repetition principle is important in scientific research, because the observational indexes are random variables,which requires a certain amount of samples to reveal their changing regularity

DNA and RNA can also be ISOLATED from the same biological sample.

So the answer is no, both DNA and RNA are together.

Answer:

so the answer is no

both DNA and RNA are together.

Explanation:

DNA and RNA can also be ISOLATED from the same. biological sample

Answer:

21.4g of HBr is the minimum mass that could be left over.

Explanation:

Based on the reaction:

HBr + NaOH → NaBr + H2O

1 mole of HBr reacts per mole of NaOH

To solve this question we need to find the moles of both reactants. If moles NaOH > moles HBr, the difference in moles represents the minimum moles of HBr that could be left over because this reaction is 1:1. Using the molar mass we can find the minimum mass of HBr that could be left over, as follows:

Moles NaOH -40.0g/mol-

17g * (1mol/40.0g) = 0.425 moles NaOH

Moles HBr -Molar mass: 80.91g/mol-

55.8g * (1mol/80.91g) = 0.690 moles HBr

The difference in moles is:

0.690 moles - 0.425 moles =

0.265 moles of HBr could be left over

The mass is:

0.265 moles * (80.91g/mol) =

Answer:

C: The clothing company used technological design to create a product that helped aid researchers conducting a scientific investigation.

Explanation:

I just did the assignment on EDGE2020 and it's 200% correct!  

Also, heart and rate if you found this answer helpful!! :) (P.S It makes me feel good to know I helped someone today!!)  :)  

Answer:

0

Explanation:

answer from gauth math

Answer:

false, it is not an example of facilitated diffusion

Answer:

Explanation:

When a drop of ink added into the water gradually moves in the whole quantity of water due to this entire water turns into blue color. This is nothing but the diffusion of ink particles into the water molecules. This is because water, as well as ink molecules, are in random motion due to the motion of ink substance.

Explanation:

Dissolve 93.52g of NaCl in about 400mL of distilled water, then add more water until final volume is 800mL. If starting with a solution or liquid reagent: When diluting more concentrated solutions, decide what volume(V2) and molarity (M2) the final soluble should be.

Answer:

The hydrogen must be compressed to 1333.13302 kPa.

Explanation:

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P * V = n * R * T

In this case:

Replacing:

P* 10.5 L= 5.75 moles* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] * 293 K

Solving:

[tex]P=\frac{5.75 moles* 0.082 \frac{atm*L}{mol*K} * 293 K}{10.5 L}[/tex]

P= 13.157 atm

If 1 atm is equal to 101.325 kPa, then 13.157 atm is equal to 1333.13302 kPa.

The hydrogen must be compressed to 1333.13302 kPa.

Answer:

8.65 atm

Explanation:

Using ideal law equation;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (Latm/molK)

T = temperature (K)

According to the information given in this question;

V = 18.0 L

n = 6.20 moles

R = 0.0821 Latm/molK

T = 33°C = 33 + 273 = 306K

P = ?

Using PV = nRT

P × 18 = 6.20 × 0.0821 × 306

18P = 155.76

P = 155.76/18

P = 8.65 atm

Answer:

Explanation:

nFeSo4=3.36/152

nkmno4=1/5nFeSO4

V=17.68 ml

Answer:

1090 Torr

Explanation:

Step 1: Given data

Step 2: Convert pO₂ to Torr

we will use the conversion factor 1 atm = 760 Torr.

1.0 atm × 760 Torr/1 atm = 760 Torr

Step 3: Calculate the total pressure of the mixture (P)

The total pressure of the mixture is the sum of the partial pressures of the gases.

P = 330 Torr + 760 Torr = 1090 Torr

Product B and E are toxic because they contain "BROMIDE" or ingredients that end in 'ol'

Based on the directions given in the information of this question, any product containing "bromide" or containing an ingredient that ends in "ol" is assumed to be TOXIC.

After carefully evaluating the ingredient contents of each product in the image attached to this question, it was realized that product B contains "pyridostigmine bromide" as an ingredient while product E contains "butorphanol" as an ingredient. Hence, in accordance to the guide given in this question, products B and E are toxic.

Learn more: https://brainly.com/question/2913382

Answer:

Hypercalcemia can cause stomach upset, nausea, vomiting and constipation. Bones and muscles. In most cases, the excess calcium in your blood was leached from your bones, which weakens them. This can cause bone pain and muscle weakness.

Some symptoms are:

Fatigue, bone pain, headaches.

Nausea, vomiting, constipation, decrease in appetite.

Forgetfulness.

Lethargy, depression, memory loss or irritability.

Muscle aches, weakness, cramping and/or twitches.

Follow the rules of Bronsted Lowry theory

So

#a

NH_2-

Add a H

#b

HnO_3

Take a H

#1

Conjugate acid means one H+ is added

sw

#2

Conjugate base means donate a H+

Ortho and para hydrogen are nuclei forms

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

So ,

[tex]\\ \Large\sf\longmapsto 250\times 15\%[/tex]

[tex]\\ \Large\sf\longmapsto 250\times \dfrac{15}{100}[/tex]

[tex]\\ \Large\sf\longmapsto 37.5g[/tex]

37.5g of NaCl present in 250g of solution.

Answer:

Given concentration of NaCl=15%

Means ,

In every 100g of Solution 15g of NaCl is present .

Now

Given mass=250g

So ,

➡250 × 15%

➡250×15/100

➡37.5g

37.5g of NaCl present in 250g of solution.

Answer:

Two methods which help us to conserve water are:

Sprinkler irrigation system: this irrigation has an arrangement of vertical pipes with rotating nozzles on the top. It is more useful in the uneven and sandy land where sufficient water is not available.

Drip irrigation system: this irrigation system has an arrangement of pipes or tubes with very small holes in them to water plants drop by drop just at the base of the root. It is very efficient as water is not wasted at all.

Let's consider the neutralization reaction between HCl and NaOH.

NaOH + HCl ⇒ NaCl + H₂O

To determine the pH of the resulting mixture, we need to determine the reactant in excess. First, we will calculate the reacting moles of each reactant.

NaOH: 0.0500 L × 0.500 mol/L = 0.0200 mol

HCl: 0.0750 L × 0.250 mol/L = 0.0188 mol

Now, let's determine the reactant in excess and the remaining moles of that reactant.

                    NaOH    +     HCl ⇒ NaCl + H₂O

Initial           0.0200       0.0188

Reaction    -0.0188       -0.0188

Final         1.20 × 10⁻³          0

The volume of the mixture is 50.0 mL + 75.0 mL = 125.0 mL. Then, 1.20 × 10⁻³  moles of NaOH are in 125.0 mL of solution. The concentration of NaOH is:

[NaOH] = 1.20 × 10⁻³ mol/0.1250 L = 9.60 × 10⁻³ M

NaOH is a strong base according to the following equation.

NaOH ⇒ Na⁺ + OH⁻

The concentration of OH⁻ is 1/1 × 9.60 × 10⁻³ M = 9.60 × 10⁻³ M.

The pOH is:

pOH = -log [OH⁻] = -log 9.60 × 10⁻³ = 2.02

We will calculate the pH using the following expression.

pH = 14.00 - pOH = 14.00 - 2.02 = 11.98

The pH is 11.98. Since pH > 7, the solution is basic.

You can learn more about neutralization here: https://brainly.com/question/16255996

We want to find the value of t such that the velocity vector makes an angle of 45° with both axes.

We found that:

t = (2/3)*(b/c)

The velocity vector makes an angle of 45° with the x and y axes.

We know that the position vector is:

r = r=b*t²i + c*t³j

Remember that the versor "i" corresponds to the x-component, and the versor "j" corresponds to the y-component, then:

r = r=b*t²i + c*t³j  = (b*t², c*t³)

The velocity vector is the vector that we get when we differentiate the position one, remember that if:

f(x) = a*x^n

then

f'(x) = n*a*x^(n - 1)

Using this, we can find that the velocity vector is:

v = (2*b*t,  3*c*t²)

Now we want to know, when does the velocity vector make an angle of 45° with the x and y axes.

Let's think of the vector as the hypotenuse of a triangle rectangle, where the x-component is the adjacent cathetus, and the y-component is the opposite cathetus. (so the angle is measured counterclockwise from the x-axis)

We have the trigonometric equation:

tan(a) = (opposite cathetus)/(adjacent cathetus)

So now we can replace these things with the known ones:

a = 45°

opposite cathetus = y-component = 3*c*t²

adjacent cathetus = x-component = 2*b*t

So we will get:

tan(45°)  =  (3*c*t²)/( 2*b*t)

1 = (3/2)*(c/b)*t

Now we can solve this for the variable, t.

1*(2/3)*(b/c) = t

t = (2/3)*(b/c)

We can conclude that at the time:

t = (2/3)*(b/c)

The velocity vector makes an angle of 45° with the x and y axes.

You can read more about vectors in:

https://brainly.com/question/10841907

Answer:

Explanation:

hope this helps you

The mass of the marble is greater than that of the water. The marble weighs more than an equivalent volume of the water. The force from dropping the marble breaks the surface tension of the water. The marble has greater mass and volume than the water.

Answer:

Explanation:

Explanation:

here's the molecule you were looking for

Answer:

Livermorium is a radioactive, artificially produced element about which little is known. It is expected to be a solid and classified as a metal. It is a member of the chalcogen group. Livermorium has four isotopes with known half-lives, all of which decay through alpha decay

Answer:

» Water evaporating to gas.

» Solid subliming to gas.

» Water freezing to solid.

» Solid melting to liquid.

Explanation:

[tex]{ \underline{ \blue{ \sf{christ \:† \: alone }}}}[/tex]

Answer:

a. is released in the process

Explanation:

In fusion reaction the nucleus is unstable so it releases its binding energy resulting in decreasing its mass so it becomes more stable.

Answer:

1,000.000

Explanation: