Answer:
1) volumetric
2) graduated
3) volumetric
Explanation:
A volumetric glassware is a glassware that is marked at a particular point. A typical example of a volumetric glassware is the volumetric flask. A volumetric glassware is capable of measuring only a specific volume of a liquid.
On the other hand, graduated glassware can measure a range of volumes of liquid. However, a volumetric glassware is still required where a high degree of accuracy is important.
The equilibrium constant (K p) for the interconversion of PCl 5 and PCl 3 is 0.0121:
PCl5 (g) → PCl3 (g) + Cl2 (g)
A vessel is charged with PCl 5 giving an initial pressure of 0.123 atm and yields PCl 3 and Cl 2. At equilibrium, the partial pressure of PCl 3 is ________ atm.
A) 0.0782.
B) 0.0455.
C) 0.0908.
D) 0.0330.
E) 0.123.
Answer: At equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
Explanation:
The partial pressure of [tex]PCl_{3}[/tex] is equal to the partial pressure of [tex]Cl_{2}[/tex]. Hence, let us assume that x quantity of [tex]PCl_{5}[/tex] is decomposed and gives x quantity of [tex]PCl_{3}[/tex] and x quantity of [tex]Cl_{2}[/tex].
Therefore, at equilibrium the species along with their partial pressures are as follows.
[tex]PCl_{5}(g) \rightarrow PCl_{3}(g) + Cl_{2}(g)\\[/tex]
At equilibrium: 0.123-x x x
Now, expression for [tex]K_{p}[/tex] of this reaction is as follows.
[tex]K_{p} = \frac{[PCl_{3}][Cl_{2}]}{[PCl_{5}]}\\0.0121 = \frac{x \times x}{(0.123 - x)}\\x = 0.0330[/tex]
Thus, we can conclude that at equilibrium, the partial pressure of [tex]PCl_{3}[/tex] is 0.0330 atm.
what does LPG stand for? mention one important source of LPG give sort answer
Answer:
liquefied petroleum gas
LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.
Methanol has the formula CH3OH. What is the predominant intermolecular force between methanol molecules?
ANSWER:
dispersion forces
dipole forces
ionic bonds
hydrogen bonds
Answer:
hydrogen bonds
Explanation:
similarly CH3OH also has a OH group and H hydrogen thus it will also form h-bonding.
The molar mass of a compound can be determined by the freezing point depression method. The solution must be relatively dilute and you must know the molal freezing point depression constant of the solvent, Kf. Which statement regarding Kf is true?
A. Kf should be small so that the solvent will not sublimate.
B. Kf will change depending on what solute is dissolved in the solvent.
C. Kf should be negative so the freezing point of the solution will decrease.
D. Kf should be large so the temperature change will be large enough to measure.
Answer:
K should be large so the temperature change will be large enough to measure.
Explanation:
Let us recall that;
∆T = k m I
Where;
∆T= change in boiling point
K= freezing point constant
m= molality
i= Van't Hoff factor
Since the change in temperature depends on k, the larger the value of k the larger the temperature change(Ts - Tb). Hence; K should be large so the temperature change will be large enough to measure.
Ts= freezing temperature of pure solvent
Tb= freezing temperature of solution
The radius of a platinum atom is 139 pm. How many platinum atoms would have to be laid side by side to span a distance of 1.39 mm?
Answer:
5x10⁶ atoms of platium have to be laid side by side
Explanation:
1 atom of platium has a radius of 139pm = 139x10⁻¹²m. The distance that occupies 1 atom of platinum is 2 times its ratio:
139x10⁻¹²m*2 = 2.78x10⁻¹⁰m
Assuming there is no distance between to atoms of platinum, just its ratio. The amount of atoms necessary to occupy 1.39mm = 1.39x10⁻³m is:
1.39x10⁻³m / 2.78x10⁻¹⁰m =
5x10⁶ atoms of platium have to be laid side by sideor each conjugate acid-base pair, identify the first species as an acid or base and the second species as the conjugate acid or base of the first. A) CH3COOH and B) CH3COO- A. is _____ B. is _________ C) CH3O- and D) CH3OH C. is _____ D. is _________
Answer:
A. an acid
B. a base
C. conjugate base
D. conjugate acid
Explanation:
This question appears incomplete because it is starting with a "or".
However, the available question can still be answered.
An acid (according to "Bronsted-Lowry") is a chemical compound/specie that can donate hydrogen ion(s) in a reaction while a base is the compound/specie that can receive hydrogen ion(s). From this definition, it can be deduced that CH₃COOH (ethanoic acid) is an acid (weak acid) because it can donate an hydrogen ion while CH₃COO⁻ is a base because it can receive a hydrogen ion.
Also, a conjugate acid is the compound formed when an acid has donated a hydrogen ion to a base (i.e it is a base with hydrogen ion attached to it) while a conjugate base is the acid that has lost it's hydrogen ion. Thus, the conjugate acid in the question is CH₃OH while the conjugate base in the question is CH₃O⁻.
A. an acid
B. a base
C. conjugate base
D. conjugate acid
For which of the following transitions would a hydrogen atom absorb a photon with the longest wavelength?
a. n = 1 to n = 2
b. n = 3 to n = 2
c. n = 5 to n = 6
d. n = 7 to n = 6
Answer:
Hence among the options a and c, option d is that the correct answer because it has rock bottom energy ( as n value increases, energy decreases as energy levels come closer).
Explanation:
The relation between energy and wavelength is:
[tex]\Lambda = hC/E[/tex]
From this equation, it's clear that wavelength and energy are inversely proportional to every other. The Lower the energy of a specific transition, the longest will the wavelength be of that specific transition.
Among the given options, options b and d are often ruled out, since those transitions produce to release of a photon because it is coming down from an excited state.
Which is a nervous system test?
Answer:
Sorry, is there supposed to be an attachment, If so kindly republish your Question.
meeet.gooogle.com/ttp-wdqt-pad
Por favor, me ajudem.
Please, help me.
Someone can teach me English, because I'm from Brazil and if you know how to speak Spanish, it's better for me.
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
i think 1. law of muliple proportion
Explanation:
please like
A calorimeter has been filled with 75 mL of water. The density of water at 25 °C is
0.998 g/mL. How many grams of water do you have at 25°C?
Answer:
isn't it 0.998
Explanation:
cause 0.998 is in the same grams / mole. I don't get
A calorimeter has been filled with 75 mL of water. The number of grams of water is 74.85 grams.
What is a calorimeter?A calorimeter is an instrument that is used to measure calorimetry. It is used to measure the heat of chemical reactions and physical and chemical changes.
Mass is the quantity of matter in a physical body. Volume is the space occupied by a three-dimensional object. Mass is the quantity of matter in a physical body. The product of the compound's molar mass and the substance's moles are defined as mass.
Given, that the volume of the water is 75 mL
The temperature of the water is 25 °C
The density of water is 0.998 g/mL
To calculate the mass, the volume is multiplied by density.
Mass = volume x density
putting the values in the formula
75 x 0.998 = 74.85 grams
Thus, the grams of water that have at 25°C is 74.85 grams.
To learn more about density, refer to the link:
https://brainly.com/question/26304205
#SPJ2
In a classroom, students who are biochemistry majors are learning about the overall organization of biological membranes. However, one of the students finds a WRONG explanation about the fluid mosaic model from a website and bring it up in a discussion. Which of the following is a WRONG explanation?
a. An explanation of the two-dimensional solutions of oriented lipids and globular proteins.
b. The lipid bilayer is a solvent for integral membrane proteins.
c. All membrane proteins diffuse laterally and freely in the lipid matrix.
d. None of the answers is correct.
e. The lipid bilayer is a permeability barrier for integral membrane proteins.
Answer:
e. The lipid bilayer is a permeability barrier for integral membrane proteins.
Explanation:
Integral membrane proteins enter the lipid bilayer by translocon channel which gives nascent polypeptide segment a chance to partition itself into lipid bilayer hydrophobic core.
Enter a balanced equation for the reaction between solid nickel(II)(II) oxide and carbon monoxide gas that produces solid nickel and carbon dioxide gas. Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer: A balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
Explanation:
The reaction equation will be as follows.
[tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex]
Number of atoms on the reactant side is as follows.
O = 2C = 1Number of atoms on the product side is as follows.
Ni = 1O = 2C = 1Since number of atoms on both the reactant and product sides are equal. Hence, the reaction equation is balanced.
Thus, we can conclude that a balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
A sample of brass, which has a specific heat capacity of , is put into a calorimeter (see sketch at right) that contains of water. The temperature of the water starts off at . When the temperature of the water stops changing it's . The pressure remains constant at . Calculate the initial temperature of the brass sample. Be sure your answer is rounded to significant digits.
Answer:
The initial temperature of the brass sample is 90.1°C
Note: The question is incomplete. A similar but complete question is given below :
A 52.9g sample of brass, which has a specific heat capacity of 0.375·J·g−1°C−1, is put into a calorimeter (see sketch at right) that contains 100.0g of water. The temperature of the water starts off at 15.0°C. When the temperature of the water stops changing it's 18.4°C. The pressure remains constant at 1 atm. Calculate the initial temperature of the brass sample. Be sure your answer is rounded to 2 significant digits.
Explanation:
Assuming that the calorimeter is an isolated system and that no heat is lost from the calorimeter. The total heat in the system is the sum of the heat content of the brass and that of water
Total heat lost by the brass = heat gained by the water
The quantity of heat lost or gained, Q = mcΔT
Where m = mass of the substance, c = specific heat capacity of substance, ΔT = temperature change
Heat gained by water is positive while heat lost by brass is negative
mass of brass = 52.9 g, specific heat capacity of brass = 0.375·J·g−1°C−1, ΔT = (18.4 - t °C; where t is the initial temperature), mass of water = 100.0 g, specific heat capacity of water = 4.186 J/g°C, ΔT = = 18.4 - 15.0 = 3.4 °C
Heat lost by brass z= - [ 52.9 × 0.375 × (18.4 - t)] = -365.01 + 19.8375t
Heat gained by water = 100 × 4.186 × 3.4 = 1423.24
Equating heat lost by brass to heat gained by water
-365.01 + 19.8375t = 1423.24
19.8375t = 1423.24 + 365.01
19.8375t = 1788.25
t = 90.1° C
Therefore, the initial temperature of the brass sample is 90.1°C
A soluble unknown has contaminated your sample. It absorbs the same wavelength as your analyte, Allura Red dye. How will this affect your results, and what type of error is introduced
Answer:
The explanation as per the given query is presented in the following paragraph.
Explanation:
The Allura Reds Pigment or coloring increases the absorption by absorbing at around a very similar wavelength as that of the analysis.Therefore, the approximated analysis concentration or its intensity seemed substantially higher than that of the authentic one. Some positive mistake is going to exist.Thus the above is the correct explanation.
The measured absorbance will be higher, thereby creating systematic error.
Absorbance can be defined as the value or quantity of light absorbed by a given sample.The presence of impurity with a similar absorption wavelength will increase the absorbance. Moreover, systematic error is a type of error that is repeated along with different processes of measurement.In conclusion, the measured absorbance will be higher, thereby creating systematic error.
Learn more in:
https://brainly.com/question/14919298
Determine the kinds of intermolecular forces that are present in each element or compound. Part A KrKr Check all that apply. Check all that apply. dispersion forces dipole-dipole forces hydrogen bonding
Answer:
The kinds of intermolecular forces that are present in each element Kr-Kr.
Explanation:
Since Kr is an inert gas and in atomic form only it is highly stable.
So, Kr gas does not form molecules.
Between the atoms of inert gas, there exist London dispersion forces.
Hence, the intermolecular forces that are present between Kr-Kr atoms is London dispersion forces.
Is the following sets of quantum numbers valid? Give suitable reason. n=3,l=2,m=3,s=+1/2
Answer:
The set of quantum numbers is not valid
Explanation:
There are four sets of quantum numbers;
1) Principal quantum number (n) which takes on integer values from n = 1,2,3 .......
2) Azimuthal quantum number (l) which takes on values 1, 2, ....(n - 1)
3) Magnetic quantum numbers (ml) which takes on values from (-l) to (+l)
4) spin quantum number (ms) which takes on values of ±1/2.
From the above, we can see that m can not have a value of 3 when l =2 because m has values between (-l) to (+l). Thus, the sets of quantum numbers is not valid.
How many protons are in Oxygen-18 and how many neutrons are in Copper-65? Please include steps for solving both!
Answer: There are 8 protons in oxygen-18 and 36 neutrons in copper-65.
Explanation:
An atom contains three sub-atomic particles, that is, protons, neutrons and electrons.
The atomic number is the total number of protons present in an atom. For oxygen-18, the atomic mass is 18.
Atomic mass is the sum of total number of protons and electrons present in an atom. As the atomic number of an oxygen atom is 8 so the number of protons present in oxygen-18 is 8.
The atomic mass of copper is 65 and for a copper atom, the atomic number is 29. Hence, the number of neutrons for copper-65 is as follows.
Atomic mass = no. of protons + no. of neutrons
65 = 29 + no. of neutrons
no. of neutrons = 65 - 29 = 36
Thus, we can conclude that there are 8 protons in oxygen-18 and 36 neutrons in copper-65.
6. Which compound contains no ionic character?
Answer:
The compound which doesn't contains ionic character is HC, H-atom and CL- atom shares 1 electron a to form covalent bond....
Construction of battery cells
Answer:
These batteries are constructed of several single cells connected in series each cell produces approximately 2.1 volts. ... A battery cell consists of two lead plates a positive plate covered with a paste of lead dioxide and a negative made of sponge lead, with an insulating material (separator) in between.
important of organic chemistry in our daily life
Answer:
Human life has become very simple by using organic chemicals. The importance of organic chemicals in the daily life and industrial area can be explained as follows. (i) Food Vitamins, proteins, sugar, flour, fats etc. ... (ii) Agriculture is an important place for organic chemical for the growth of agricultural production.
Which probing question lies within the scope of physics?
O A.
Are fish in the open ocean
attracted by underwater sounds?
O B.
Does increasing the saltiness of
ocean water affect the speed
of sound in the water?
O C.
What effect does the release of industrial wastewater have on
the acidity of oceans?
D. What is the effect of rising sea temperatures on
ocean currents?
Answer:
answer number C is the correct answer for this
what type of properties change ina physical change? Give an example to support your answer?
pls quick who will give the answer first will get the brainliest
Explanation:
We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.hope it helps.stay safe healthy and happy.Someone can you please please help me
Answer:
FalseExplanation:
Target organ toxins are chemicals that can cause adverse effects or disease states manifested in specific organs of the body. Toxins do not affect all organs in the body to the same extent due to their different cell structures.
Please helpplease please..help
Answer:
vague symptoms are characteristic of an acute toxin, because of the of the lack of well defined consistency that these symptoms have in relation to the course of the disease progress.
A molecule with the formula AX 4 uses ________ to form its bonds. sp2 hybrid orbitals sp3d hybrid orbitals sp3 hybrid orbitals sp3d2 hybrid orbitals sp hybrid orbitals
Answer:
sp3 hybrid orbitals
Explanation:
The formula of a molecule gives us an idea of its structure and the nature of hybrid orbitals that are involved in the formation of the molecule.
AX4 corresponds to tetrahedral geometry. If a molecule is in tetrahedral geometry, it is most likely sp3 hybridized as usual.
Hence, a molecule with the formula AX 4 uses sp3 hybrid orbitals to form its bonds
if salt and sand is mixed with distilled water, what will be the residue? and, what will be the filtrate?
Answer:
Filtration is a technique used as a remedy to separate mixes
Explanation:
If you have a sodium, then you will explore that salt dissolves but the sand is still the same.
If the salt in the resin water solution scanners, the sand remains the residue and passes through the filter paper.
All you have to do now is pleasant the salty water so that the water can evaporate, leaving the salt behind.
Describe the electron configuration of an atom using principal energy level, sublevels, orbitals, and periodic table. Give one example others may not think about and why you made this selection.
Silicon is not allowed.
Explanation:
The electron density number as well as the sublevel letter are used to describe valence electrons in an atom. The third total energy and subbasement p, for example, is denoted by 3p. The electron configuration of oxygen, for example, is 1s^2 2s^2 2p^4, which means the first two electrons will couple up in the 1s orbital, while the following two protons will pair up in the 2s orbital.
The sample atom is Carbon with electron configuration; 1s² 2s² 2p².
The principal energy level of an electron refers to the shellp in which the electron is located relative to the atom's nucleus. In this case only 2 energy levels exist in a carbon atom; which are energy level 1 and 2
The sublevels exist within a principal energy and the electron configuration of an atom is described with consideration of energy sublevels. The sublevels in a carbon atom are;
s and p energy sublevels.The orbitals in this configuration are: 1s 2s 2px 2py 2pz in which case; each orbital can accommodate 2 electrons each.
Ultimately, the location of an element on the periodic table with respect to group and period are used to determine the valency and no. of energy levels in the atom of that Element.
Read more:
https://brainly.com/question/13749106
Which of the following describes an organisms habitat?
A) where the organism lives
B) how the organism moves
C) what the organism eats
D) what eats the organism
Answer:
A) habitat
Explanation:
a habitat is essentially the organisms "home". also known as a "niche"
What is the molarity of a solution if 325ml of the solution contains 46.8 grams of NaHCO3?
Answer:
1.714 M
Explanation:
We'll begin by calculating the number of mole in 46.8 g of NaHCO₃. This can be obtained as follow:
Mass of NaHCO₃ = 46.8 g
Molar mass of NaHCO₃ = 23 + 1 + 12 + (3×16)
= 23 + 1 + 12 + 48
= 84 g/mol
Mole of NaHCO₃ =?
Mole = mass / molar mass
Mole of NaHCO₃ = 46.8 / 84
Mole of NaHCO₃ = 0.557 mole
Next, we shall convert 325 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
325 mL = 325 mL × 1 L / 1000 mL
325 mL = 0.325 L
Thus, 325 mL is equivalent to 0.325 L.
Finally, we shall determine the molarity of the solution. This can be obtained as shown below:
Mole of NaHCO₃ = 0.557 mole
Volume = 0.325 L
Molarity =?
Molarity = mole / Volume
Molarity = 0.557 / 0.325
Molarity = 1.714 M
Therefore the molarity of the solution is 1.714 M
