Dissolution of KOH, ΔHsoln:

KOH(s) → KOH(aq) (10.1)
Neutralization of solid KOH, ΔHneut:

KOH(s) + HCl(aq) → H2O(l) + KCl(aq) (10.2)

1) Using Hess's law, show how to combine Reaction 10.1 and Reaction 10.2 to give
KOH(aq) + HCl(aq) → H2O(l) + KCl(aq) (10.3)

2)How should ΔHsoln and ΔHneut be combined (mathematically) to give the change in enthalpy for Reaction 10.3, ΔH?

Considering the definition of Kc, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

The balanced reaction is:

H₂(g) +Cl₂(g) ⇆ 2 HCl(g)

Equilibrium is a state of a reactant system in which no changes are observed as time passes, despite the fact that the substances present continue to react with each other. In other words, reactants become products and products become reactants and they do so at the same rate.

In other words, chemical equilibrium is established when there are two opposite reactions that take place simultaneously at the same speed.

The concentration of reactants and products at equilibrium is related by the equilibrium constant Kc. Its value in a chemical reaction depends on the temperature and the expression of a generic reaction aA + bB ⇄ cC is

[tex]K_{c} =\frac{[C]^{c} x[D]^{d} }{[A]^{a} x[B]^{b} }[/tex]

That is, the constant Kc is equal to the multiplication of the concentrations of the products raised to their stoichiometric coefficients by the multiplication of the concentrations of the reactants also raised to their stoichiometric coefficients.

In this case, the constant Kc can be expressed as:

[tex]K_{c} =\frac{[HCl]^{2} }{[H_{2} ]x[Cl_{2} ] }[/tex]

You know that in an equilibrium mixture of HCl, Cl₂, and H₂:

Replacing in the expression for Kc:

[tex]4x10^{18} =\frac{[HCl]^{2} }{[1x10^{-11} ]x[2x10^{-10} ] }[/tex]

Solving:

[tex]4x10^{18} =\frac{[HCl]^{2} }{2x10^{-21} }[/tex]

[tex]4x10^{18} x 2x10^{-21}=[HCl]^{2}[/tex]

[tex]8x10^{-3} =[HCl]^{2}[/tex]

[tex]\sqrt[2]{8x10^{-3}} =[HCl][/tex]

0.0894 [tex]\frac{mol}{L}[/tex]= [HCl]

Finally, the equilibrium molar concentration of HCl at 500 K is 0.0894 [tex]\frac{mol}{L}[/tex].

Learn more:

Answer:

where is the question????????????

As the solar nebula cooled METAL compounds are the first to condense from a gas to a solid. The solar nebula gave birth to the Solar system.

A solar nebula is a disc-shaped cloud of gases and grain dust, which gave birth to the Sun and planets of the Solar system, approximately 4.6 billion years ago.

The solar nebula is at the beginning a mixture of interstellar gases (hydrogen and helium) and dust grains.

As the solar nebula cools, heavy elements such as metals in the disk condensate into planetesimals.

Learn more in:

https://brainly.com/question/14151385

Answer:

13.6 is the correct answer written in standard form.

Explanation:

1.36, move the decimal once to the right to get 13.6

Answer:

13.6

Explanation:

The standard form is 13.6

Answer:

heat the solution

Explanation:

i think

Answer:

The way to make a supersaturated solution is to add heat, but just a little heat won't do the job. You have to heat the water close to the boiling point. When the water gets this hot, the water molecules have more freedom to move around, and there is more space for solute molecules between them.

Answer:

Explanation:

Thin-layer chromatography (TLC) is a chromatography technique used to separate non-volatile mixtures. ... After the sample has been applied on the plate, a solvent or solvent mixture (known as the mobile phase) is drawn up the plate via capillary action.

Answer: Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions.

A physical change is are changes affecting the form of a chemical substance, but not its chemical composition. Physical changes are used to separate mixtures into their component compounds, but can not usually be used to separate compounds into chemical elements or simpler compounds.

Answer:,   Correct option is    0.288m/s

Explanation:    

The relationship between the velocity of the wave, its wavelength and frequency is given by the formula

Wavelengthλ=

Frequency(ν)

Speed(v)

​

,

where, v - velocity of the wave

           λ - wavelength of the wave

          f - frequency of the wave.

In the question it is given that the frequency is 4.8 Hz and the wavelength is 6.0 cm, that is, 0.06 meters.

The velocity of the sound is calculated as follows.

v=f×λ=4.8 Hz×0.06 m=0.288 m/s

Hence, the speed of the water wave is 0.288 m/s.

Mercury (I) phosphate with the chemical formula  (Hg2)3(PO4)2 has 16 atoms.

Sum of all the atoms = 6+2+8

                                   = 16 atoms

More on the number of atoms in a molecule can be found here: https://brainly.com/question/19140379

Answer:

D . GOD BLESS .

Explanation:

Explanation:

the investigation lasts for 7 days.

hope this helps you.

Answer: Atomic number

Explanation:

I hope this helps you!

Answer:

This question is asking for a method for the determination of the freezing point in a solution that does not have a noticeable transition in the cooling curve, which is basically based on a linear fit method.

The first step, would be to understand that when the transition is well-defined as the one on the attached file, we can just identify the temperature by just reading the value on the graph, at the time the slope has a pronounced change. For instance, on the attached, the transition occurs after about 43 seconds and the freezing point will be about 4 °C.

However, when we cannot identify a pronounced change in the slope, it will be necessary to use a linear fit method (such as minimum squares) to figure out the equation for each segmented line having a significantly different slope and then equal them so that we can numerically solve for the intercept.

As an example, imagine two of the segmented lines have the following equations after applying the linear fit method:

[tex]y=-3.5 x + 25\\\\y=-0.52 x + 2[/tex]

First of all, we equal them to find the x-value, in this case the time at which the freezing point takes place:

[tex]-3.5 x + 25=-0.52 x + 2\\\\-3.5 x+0.52 x =2-25\\\\x=\frac{-23}{-2.98}=7.72[/tex]

Next, we plug it in in any of the trendlines to obtain the freezing point as the y-value:

[tex]y=-3.5 (7.72) + 25\\\\y = 1.84[/tex]

This means the freezing point takes place after 7.72 second of cooling and is about 1.84 °C. Now you can replicate it for any not well-defined cooling curve.

Learn more:

This problem is describing the equilibrium whereby hydrofluoric acid decomposes to hydrogen and fluorine gases at 298 K whose equilibrium constant is 8.70x10⁻³, the equilibrium concentrations of all the reactants are both 1.33x10⁻³ M and asks for the initial concentration of hydrofluoric acid which turns out to be 2.86x10⁻³ M.

Then, we can write the following equilibrium expression for hydrofluoric acid once the change, [tex]x[/tex], has taken place:

[tex][HF]=[HF]_0-2x[/tex]

Now, since both products are 1.33x10⁻³ M we infer the reaction extent is also 1.33x10⁻³ M, and thus, we can calculate the equilibrium concentration of HF via the law of mass action (equilibrium expression):

[tex]8.70x10^{-3}=\frac{(1.33x10^{-3} M)^2}{[HF]} }[/tex]

[tex][HF]=\frac{(1.33x10^{-3} M)^2}{8.70x10^{-3}} }=2.03x10^{-4}M[/tex]

Finally, the initial concentration of HF is calculated as follows:

[tex][HF]_0=[HF]+2x=2.033x10^{-4}+2*(1.33x10^{-3})=2.86x10^{-3}M[/tex]

Learn more:

Answer:  251 K

Explanation: hope this helps :)

Using melting and boiling temperature, hardness and electric current passing testing.

Ionic solids are materials that have a strong bond between their ions, thus producing well-defined shapes.

In addition, due to this strong attraction, the boiling and melting temperatures of these materials are very high, in addition to the resistance to breakage presented by them.

Finally, ionic solids are also excellent conductors of electricity.

So, their properties used to determine whether or not they are ionic solids are  melting and boiling temperature, hardness and electric current passing testing.

Learn more about ionic solids: brainly.com/question/8236583

Answer:

from the words below underline six example of rhetorical patterns

In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.

Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.

Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:

[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]

Next, we multiply each anion's oxidation number by the subscript, to obtain the following:

[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]

Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.

Learn more:

The molarity of the solution is 0.01.

Brainliest?

Answer:   ionosphere

Explanation:       First it bounces off a top layer of the atmosphere called the ionosphere, then it bounces back to the Earth (this is reflection. It then bounces up again to the ionosphere, and continues bouncing back again until it reaches the radio receiver. This is called a skywave, which works around 3 to 30 MHz.

The volume of sulphuric acid, H₂SO₄ needed for the complete reaction with 72.2 g of sodium hydroxide, NaOH is 5.31 L

We'll begin by calculating the number of mole in 72.2 g of NaOH. This can be obtained as follow:

Mass of NaOH = 72.2 g

Molar mass of NaOH = 23 + 16 + 1 = 40 g/mol

Mole = mass / molar mass

Mole of NaOH = 72.2 / 40

2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O

From the balanced equation above,

2 moles of NaOH reacted with 1 mole of H₂SO₄.

Therefore,

1.805 mole of NaOH will react with = 1.805 / 2 = 0.9025 mole of H₂SO₄.

Mole of H₂SO₄ = 0.9025 mole

Molarity of H₂SO₄ = 0.170 M

Volume = mole / Molarity

Volume of H₂SO₄ = 0.9025 / 0.170

Thus, the volume of H₂SO₄ needed for the reaction is 5.31 L

Learn more: https://brainly.com/question/14356462

Answer:

go get the stuff.

Explanation:

Explanation:

filling air inside an empty o2 medal containers, if air is added, the air inside, creates volume inside.

due to heat, weather,... depending on what indoor or outdoor storage said containers r placed in,;

So, I can't give you an answer, due to lack of details..sorry...

Answer:

›› FeBr2 molecular weight. Molar mass of FeBr2 = 215.653 g/mol. This compound is also known as Iron(II) Bromide. Convert grams FeBr2 to moles or moles FeBr2 to grams. Molecular weight calculation: 55.845 + 79.904*2 ›› Percent composition by element

Explanation:

If 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

Mass is defined as a way to gauge how much matter there is in a substance or thing. The kilogram (kg) is the fundamental SI unit of mass, while lower masses can also be measured in grams (g). Atoms make up everyday matter. A majority of an atom's mass is contained in its nucleus.

Given Fe = 38.6 g.

Fe has a molar mass = 55.845 g/mol.

Given mass/molar mass equals 38.6g/55.845gmol-1, or 0.6912 moles of iron.

The reaction is described as Fe + Br2 FeBr2.

One mole Fe yields 1 mole of FeBr2.

FeBr2 would be produced from 0.6912 moles of Fe.

FeBr2 has a molar mass of 215.65 g/mol.

Moles of FeBr2 x Molar mass of FeBr2

= 215.65 g/mole x 0.6912 mole

= 149.06 g FeBr2 produced is the formula.

Thus, if 38.6 grams of iron react with an excess of bromine gas, the mass of FeBr2 can form is 149 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ2

Answer:Nothing

Explanation:

The answer is nothing the tempatature isnt matched with the degrees this is false