Distributions of electric charges in a cell play a role in moving ions into and out of a cell. In this situation, the motion of the ion is affected by two forces: the electric force due to the non-uniform charge distribution in the cell membrane, and the resistive force (viscosity) due to colliding with the fluid molecules. In order to begin our analysis of this, let's consider a toy model in which the ion is moving in response to electric forces alone.

Charges in a cell membrane are distributed along the opposite sides of the membrane approximately uniformly. This leads to an (on the average) constant electric field inside the membrane. A simple model that gives this kind of field is two large parallel plates close together. The field between the plates is approximately constant pointing from the negative to the parallel plate. This results in a charge feeling a constant force anywhere between the plates (sort of like flat-earth gravity turned sideways). Outside of the plates the electric fields from the two plates cancel and there is no force.

2. The electric field between the plates (inside the membrane) is about 107 N/C and the thickness of the membrane is about 7 nm. Estimate:

2.1 The electric force on the ion when it is in the center of the channel.
F = N

Explain your reasoning.



2.2 The acceleration of the ion when it is in the center of the channel.
a = nm/s2
Explain your reasoning.



2.3 The magnitude of the change in the ion's potential energy as it crosses from one side of the plates to the other.
U = J
Explain your reasoning.



2.4 The kinetic energy the ion would gain as it crosses from one side of the plates to the other.
KE = J
Explain your reasoning.

Could you explain 2.3!

Answer:

C. The left wire attracts the right wire and exerts as much force as the right wire does.

Explanation:

To know what is the answer you first take into account the magnetic field generated by each current, for a distance of d:

[tex]B_1=\frac{\mu_oI_1}{2\pi d}=\frac{\mu_o}{2\pi d}(1A)\\\\B_2=\frac{\mu_oI_2}{2\pi d}=\frac{\mu_o}{2\pi d}(2A)=2B_1\\\\[/tex]

Next, you use the formula for the magnetic force produced by the wires:

[tex]\vec{F_B}=I\vec{L}\ X \vec{B}[/tex]

if the direction of the L vector is in +k direction, the first wire produced a magnetic field with direction +y, that is, +j and the second wire produced magnetic field with direction -y, that is, -j (this because the direction of the magnetic field is obtained by suing the right hand rule). Hence, the direction of the magnetic force on each wire, produced by the other one is:

[tex]\vec{F_{B1}}=I_1L\hat{k}\ X\ B_2(-\hat{j})=I_1LB_2\hat{i}=(2A^2)\frac{L\mu_o}{2\pi d}\hat{i}\\\\\vec{F_{B2}}=I_2L\hat{k}\ X\ B_2(\hat{j})=I_2LB_1\hat{i}=-(2A^2)\frac{L\mu_o}{2\pi d}\hat{i}[/tex]

Hence, due to this result you have that:

C. The left wire attracts the right wire and exerts as much force as the right wire does.

Answer:

(a) Ra = 9.25 kN; Rb = 5.75 kN

(b) 26.7 kN

Explanation:

(a) Draw a free-body diagram of the crane.  There are four forces:

Reaction Ra pushing up at A,

Reaction Rb pushing up at B,

Weight force 12.5 kN pulling down at G,

and weight force 2.5 kN pulling down at F.

Sum of moments about B in the counterclockwise direction:

∑τ = Iα

-Ra (0.66 m + 0.42 m + 2.52 m) + 12.5 kN (2.52 m + 0.42 m) − 2.5 kN ((3.6 m + 0.9 m) cos 30° − 2.52 m) = 0

-Ra (3.6 m) + 12.5 kN (2.94 m) − 2.5 kN (1.38 m) = 0

Ra = 9.25 kN

Sum of moments about A in the counterclockwise direction:

∑τ = Iα

Rb (0.66 m + 0.42 m + 2.52 m) − 12.5 kN (0.66 m) − 2.5 kN ((3.6 m + 0.9 m) cos 30° + 0.66 m + 0.42 m) = 0

Rb (3.6 m) − 12.5 kN (0.66 m) − 2.5 kN (4.98 m) = 0

Rb = 5.75 kN

Alternatively, you can use sum of the forces in the y direction as your second equation.

∑F = ma

Ra + Rb − 12.5 kN − 2.5 kN = 0

Ra + Rb = 15 kN

9.25 kN + Rb = 15 kN

Rb = 5.75 kN

However, you must be careful.  If you make a mistake in the first equation, it will carry over to this equation.

(b) At the maximum weight, Ra = 0.

Sum of the moments about B in the counterclockwise direction:

∑τ = Iα

12.5 kN (2.52 m + 0.42 m) − F ((3.6 m + 0.9 m) cos 30° − 2.52 m) = 0

12.5 kN (2.94 m) − F (1.38 m) = 0

F = 26.7 kN

Answer:

Mass

Explanation:

Mass is the measure of amount of matter contained within any substance and hence mass determines the weight. Unit of mass is kilogram as per ISI system of units.  

Mass is measured through a balance. The more is the mass of an object, the more the balance tilts towards the object side.  

Weight is equal to product of mass and the gravitational constant i.e 9.8m/s^2

Answer:

......................

Answer:

Mercury is rocky

Explanation:

Answer:

Rocky

Explanation:

It has no atmosphere so it cannot hold gas.

The rate of heat loss, in watts, does this achieve is 37.66 W

It leads in cooling since water absorbs heat equivalent to mass times latent heat of evaporation to get converted into vapor .

So,

latent heat of evaporation of water = 2260 x 10³ J / kg or 2260 J / g

Now

in the evaporation of 1 g of water , heat lost = 2260 J

And,

heat lost per minute = 2260 J

So,

heat lost per second = 2260 / 60

= 37.66 J /s

= 37.66 W

Learn more about heat here: https://brainly.com/question/9636950

Carbon dioxide is the most abundant greenhouse gas in the atmosphere.

Answer:C

Explanation:

Carbon dioxide is the most abundance greenhouse gas in The atmosphere.

Answer:

The deceleration is  [tex]a = - 76.27 m/s^2[/tex]

Explanation:

From the question we are told that

   The height above  firefighter safety net is [tex]H = 14 \ m[/tex]

   The length by which the net is stretched is [tex]s = 1.8 \ m[/tex]

From the law of energy conservation

    [tex]KE_T + PE_T = KE_B + PE_B[/tex]

 Where [tex]KE_T[/tex] is the kinetic energy of the person before jumping which equal to zero(because to kinetic energy at maximum height )

   and  [tex]PE_T[/tex] is the potential energy of the before jumping  which is mathematically represented at

          [tex]PE_T = mg H[/tex]

and  [tex]KE_B[/tex] is the kinetic energy of the person just before landing on the safety net  which is mathematically represented at

        [tex]KE_B = \frac{1}{2} m v^2[/tex]

and  [tex]PE_B[/tex] is the potential energy of the person as he lands on the safety net which has a value of zero (because it is converted to kinetic energy )

   So the above equation becomes

          [tex]mgH = \frac{1}{2} m v^2[/tex]

=>           [tex]v = \sqrt{2 gH }[/tex]

    substituting values

                [tex]v = 16.57 m/s[/tex]

Applying the equation o motion

             [tex]v_f = v + 2 a s[/tex]

Now the final velocity is zero because the person comes to rest

      So

         [tex]0 = 16.57 + 2 * a * 1.8[/tex]

            [tex]a = - \frac{16.57^2 }{2 * 1.8}[/tex]

            [tex]a = - 76.27 m/s^2[/tex]

Answer:Reflection

Explanation:

The throwing back of a sound wave without absorbing it is called reflection

In acoustic reflection of sound is termed as echo i.e. sound arrived at the listener after a particular delay depending upon the position of barrier to the observer.

The reflection of sound is used in many devices like megaphone, trumpets, etc. It is also used in auditorium such that the ceiling of the auditorium is curved for multiple reflections of sound so that sound can be reached at every corner of the auditorium.

Answer:

Here's your answer :

hope it helps!

Answer:

a) 1.248 rad/s

b) 13.728 m/s

c) 0.52 rad/s^2

d) 17.132m/s^2

Explanation:

You have that the angles described by a astronaut is given by:

[tex]\theta=0.260t^2[/tex]

(a) To find the angular velocity of the astronaut you use the derivative og the angle respect to time:

[tex]\omega=\frac{d\theta}{dt}=\frac{d}{dt}[0.260t^2]=0.52t[/tex]

Then, you evaluate for t=2.40 s:

[tex]\omega=0.52(2.40)=1.248\frac{rad}{s}[/tex]

(b) The linear velocity is calculated by using the following formula:

[tex]v=\omega r[/tex]

r: radius if the trajectory of the astronaut = 11.0m

You replace r and w and obtain:

[tex]v=(1.248\frac{rad}{s})(11.0m)=13.728\frac{m}{s}[/tex]

(c) The tangential acceleration is:

[tex]a_T=\alpha r\\\\\alpha=\frac{\omega^2}{2\theta}=\frac{(1.248rad/s)^2}{2(0.260(2.40s)^2)}=0.52\frac{rad}{s^2}[/tex]

(d) The radial acceleration is:

[tex]a_r=\frac{v^2}{r}=\frac{(13.728m/s)^2}{11.0m}=17.132\frac{m}{s^2}[/tex]

Answer:

The horizontal distance between two adjacent crests or troughs is known as the wavelength.

Answer: Wavelength

Explanation:

From crest to crest, it is one full wavelength

Answer:

Explanation:

Emf e generated in a coil with no of turn n and area A rotating in a magnetic field B  with angular speed of ω is given by the expression

e = e₀ sinωt

where e₀ = nωAB which is the maximum emf generated

Putting the given values

15.7 = 1000xω x 20 x 10⁻² x 5

ω = .0157

frequency of rotation

= ω / 2π

= .0157 / 2 x 3.14

= .0025 /s

9 rotation / hour .

Answer:

The current pass the [tex]R_2[/tex] is  [tex]I = 0.25 A[/tex]

Explanation:

The diagram for this question is shown on the first uploaded image  

From the question we are told that

    The voltage  is  [tex]V = 3V[/tex]

     The first resistance is  [tex]R_1 = 7 \Omega[/tex]

     The second resistance is  [tex]R_2 = 5 \Omega[/tex]

Since the resistors are connected in series their equivalent resistance is  

       [tex]R_{eq} = R_1 +R_2[/tex]

Substituting values

         [tex]R_{eq} = 7 + 5[/tex]

         [tex]R_{eq} = 12 \Omega[/tex]

Since the resistance are connected in serie the current passing through the circuit  is the same current passing through [tex]R_2[/tex] which is mathematically evaluated as

        [tex]I = \frac{V}{R_{eq}}[/tex]

Substituting values  

      [tex]I = \frac{3}{12}[/tex]

      [tex]I = 0.25 A[/tex]

Answer:

The answer is A

Explanation:

Independent variables don't have to depend on other factors of the experiment because they're independent

Answer:

A.

Explanation:

Independent variables don't have to depend on other factors of the experiment because they're independent.

Answer:

The magnetic field at the center of the coil = 5.23 * 10 ^ -5 T

Explanation:

Information from the question:

Number of turns of the coil = 100 turns

The diameter of the coil = 6 m

The radius of the coil = diameter / 2 = 3 m

The coil current = 2.5 A

Formula : The Magnetic field at the center of the coil =

                                  k * number of turns * current / 2 * radius

Therefore, The Magnetic field at the center of the coil=

                                 (4 * [tex]\pi[/tex] * 10 ^ -7 * 100 * 2.5 ) / (2 * 3)

The Magnetic field at the center of the coil = 5.23 * 10 ^ -5 T

Answer:30

Explanation:

Current=60 milliamps

Current=(voltage)/(resistance)

60=(voltage)/(resistance)

Doubling the resistance means multiplying both sides by 1/2

60x1/2=(voltage)/(resistance) x 1/2

30=(voltage)/2(resistance)

Therefore the resistance would be 30 milliamp if we double the resistance

Answer:

3) False. It is expensive since it requires sophisticated equipment and very low temperatures

Explanation:

Nuclear magnetic resonance imaging measurements consist of magnetic resonance imaging to analyze tissues by the transition of the unpaired electron at carbon 13, giving information on the structure and composition of tissues. This information is processed in computers and transformed into images.

So the physical measurement is the MRN

Now we can analyze the statements in the problem

1) True by itself a magnetic measurement is non-invasive

2) True. Measuring carbon transitions has information about the soft tissue of the body

3) False. It is expensive since it requires sophisticated equipment and very low temperatures

4) Right. The applied magnetic field is high to be able to induce carbon transaction

Answer:

A i. E = 9.62 × 10⁻⁷ J/s

ii. The absorbed dose is 4.81 × 10⁻⁶ Gy

iii. The equivalent dose is  3.37 × 10⁻⁴ rem/s

iv.  t = 593471.81 seconds

B. i. 4.025 × 10¹⁵/s

ii. 0.512 mW

C. 7218092.2 seconds

D. i. 6.3 × 10⁻¹ J

ii. 1.4 × 10⁻² W

iii. 1.57 × 10³ Curie

E. 0.129 Ω

Explanation:

The given parameters are;

Mass of tumor = 0.20 kg

Activity of Cobalt-60 = 2.60 × 10⁻⁴ Ci

Photon energy = 1.25 MeV

(i) The energy, E, delivered to the tumor is given by the relation;

[tex]E = \frac{1}{2}\left (Number \, of \, decay / seconds \right )\times \left (Energy \, of \, photon \right )[/tex]

[tex]E = \frac{1}{2}\left (2.6\times 10^{-4}Ci )\times \left (\frac{3.70\times 10^{10}decays/s}{1 Ci} \right )\times 1.25\times 10^{6}eV\times \frac{1.6\times 10^{-19}J}{1eV}[/tex]

E = 9.62 × 10⁻⁷ J/s

(ii) The equation for absorbed dose is given as follows;

Absorbed dose, D, in Grays Gy = (Energy Absorbed Joules J)/Mass kg

Therefore, absorbed dose = (9.62 × 10⁻⁷ J/s)/( kg) = 4.81 × 10⁻⁶ Gy

1 Gray = 100 rad

4.81 × 10⁻⁷ Gy = 100 × 4.81 × 10⁻⁶ = 4.81 × 10⁻⁴ rad/s

(iii) Equivalent dose, H, is  given by the relation;

H = D × Radiation factor, [tex]w_R[/tex]

∴ H = 0.7 × 4.81 × 10⁻⁴ rad/s = 3.37 × 10⁻⁴ Sv = 3.37 × 10⁻⁴ rem/s

(iv) The exposure time required for an equivalent dose of 200 rem is given as follows;

[tex]\dot{H} = \dfrac{H}{t}[/tex]

Therefore;

[tex]t= \dfrac{200}{{3.37 \times 10^{-4}} } = 593471.81 \, s[/tex]

∴ t = 6.9 days

B. The number of electrons ejected is given by the relation;

[tex]N = \frac{P}{E} = \frac{P \times \lambda}{hc}[/tex]

[tex]N = \dfrac{2.0 \times 10^{-3} \times 400 \times 10^{-9}}{6.626 \times 10^{-34} \times 3 \times 10^8} = 4.025 \times 10^{15}/s[/tex]

(ii) The power carried by the electron

The energy carried away by the electrons is given by the relation;

[tex]KE_e = hv - \Phi[/tex]

[tex]KE_e = \frac{6.626 \times 10^{-34} \times 3 \times 10^8}{400 \times 10^{-9}} - 2.31 \times \frac{1.6 \times 10 ^{-19} }{1}[/tex]

[tex]KE_e = 4.9695 \times 10^{-19} - 3.696 \times 10 ^{-19} = 1.2735 \times 10^{-19} J[/tex]

Power, P[tex]_e[/tex], carried away by the electron = 4.025 × 10¹⁵ × 1.2735 × 10⁻¹⁹ = 0.512 mW

C. The given parameters are;

d = 1.19 mm, ∴ r = 1.19/2 = 0.595 × 10⁻³ m

l = 50 mm = 5 × 10⁻³ m

V = 500 ml = 5 × 10⁻⁴ m³

η = 0.0027 Pa

p = 1,900 Pa.

[tex]\dfrac{V}{t} = \dfrac{\pi }{8} \times \dfrac{P/l}{\eta } \times r^4[/tex]

[tex]t = \dfrac{8\times \eta\times V\times l }{\pi \times P \times r^4}[/tex]

[tex]t = \dfrac{8\times 0.0027 \times 5 \times 10^{-4} \times 5 \times 10^{-2} }{\pi \times 1900 \times (0.595 \times 10^{-4} )^4}[/tex]

t = 7218092.2 seconds

D) i. Energy absorbed is given by the relation;

E = m×D

Where:

D = 35 Gray = 35 J/kg

m = 18 g = 18 × 10⁻³ kg

∴ E = 35 × 18 × 10⁻³ = 6.3 × 10⁻¹ J

ii. Total time for treatment = 15 × 5 = 75 minutes

Energy absorbed = 6.3 × 10⁻¹ × 100 = 63 J

Power = Energy(in Joules)/Time (in seconds)

∴ Power = 63/(75×60) = 1.4 × 10⁻² W

iii. Whereby the power is provided by 0.5% of the photons emitted by the source, we have;

[tex]P_{source}= \frac{P_{beam}}{0.005} =\frac{0.0014}{0.005} =0.28 \, W[/tex]

1 MeV = 1.60218 × 10⁻¹³ J

0.03 MeV = 0.03 × 1.60218 × 10⁻¹³ J = 4.80654 × 10⁻¹⁵ J/photon

Therefore, the number of disintegration per second = 0.28 J/s ÷  4.80654 × 10⁻¹⁵ J/photon = 5.83 × 10¹³ disintegrations per second

1 Curie = 3.7 × 10¹⁰  disintegrations per second

Hence, 5.83 × 10¹³ disintegrations per second = (5.83 × 10¹³)/(3.7 × 10¹⁰) Curie

= 1.57 × 10³ Curie

E. The parameters given are;

Density of water = 1000 kg/m³

Volume of water = 250 ml = 0.00025 m³

Initial temperature, T₁, = 25°C

Final temperature, T₂, = 100°C

Change in temperature, ΔT = 100 - 25 = 75°

Specific heat capacity of the water = 4200 J/kg/°C

Mass of water = Density × Volume = 1000 × 0.00025 = 0.25 kg

∴ Heat supplied = 4200 × 0.25 × 75 = 78,750 J

Time to heat the water = 45.0 sec

Therefore, power = Energy/time = 78750/45 = 1750 W

The formula for electrical power = I²R =VI = V²/R

Therefore, where V = 15.0 V, we have;

15²/R = 1750

R = 15²/1750 = 0.129 Ω.

The resistance of the heater = 0.129 Ω.

Answer:

Groups and culture helps in influencing our values,ethics and beliefs. This influence should always be questioned through the process of thinking critically.

This best summarizes the relationship between groups and culture and critical thinking.

Answer:

The answer is diffraction

Explanation:

Answer:

The answer is diffraction

Explanation:

I did the test! HOPE THIS HELPS!

Answer:

Check the explanation

Explanation:

Part A

F = CA

this drag force balances the weight = 6X 9.8

so

6X9.8 = 0.5 X A X0.5 X 1.2 X 532

A= 0.069 m2

Part B

here the sorce is moving and the observer is at rest

so f= f(- 1 - 1

f = 1.1X10 343 343 – 53

f' = 1.3 KHz

Part C:

given the intensity = 30 dB

we know that I dB = 10 log (I(W/m2))

so we get I (W/m2) = 1000

Part D : The catch

Given that U1 = 53 M1 = 6 kg

U2 =-10 M2=0.25

V1=V2

now conserving momentum

6 X 53 -0.25 X10 =(6+0.25)V

V= 50.48 m/sec

Answer:

Answer: the true statement form the given statements is “the athletes is not doing any work because he does not move weight”

Explanation:

The athlete isn’t doing any work because he doesn’t move the weight is the correct statement.

Here ,

Hence there is no work done by the athlete

Therefore ,The athlete isn’t doing any work because he doesn’t move the weight is the correct statement

Learn more about Work done here

https://brainly.com/question/25573309

#SPJ2

Answer:

The Object will immediately begin moving toward the left

Explanation:

Because the force of thirteen is greater than ten and applied to the opposite side

Answer:

A) 0.188

B) 53.1 ⁰

Explanation:

taking moment about 0

∑ Mo = Lo∝

mg 1/2 sin∅ = 1/3 m L^2∝

note ∝ = w[tex]\frac{dw}{d}[/tex]∅

forces acting along t-direction ( ASSUMED t direction)

∑ Ft = Ma(t) = mr∝

mg sin ∅ - F = m* 1/2 * 3g/2l sin∅

therefore F = mg/4 sin∅

forces acting along n - direction ( ASSUMED n direction)

∑ Fn = ma(n) = mr([tex]w^{2}[/tex])

= mg cos∅ - N = m*1/2*3g/1 ( 1 - cos∅ )

hence N = mg/2 ( 5cos∅ -3 )

A ) Angle given = 30⁰c find coefficient of static friction

∪ = F/N

  = [tex]\frac{\frac{mg}{4}sin30 }{\frac{mg}{2}(5cos30 -3) }[/tex]  = 0.188

B) when there is no slip

N = O

   = 5 cos ∅ -3 =0

   therefore cos ∅ = 3/5  hence ∅ = 53.1⁰

Answer: A. Balloons can be filled with air.

C. Air has mass.

Explanation:

Learn more https://brainly.com/question/3238218

Balloons are able to be filled with air and air has mass.

Answer:

C. is always perpendicular to the surface of the conductor

Explanation:

On a charged conductor , electric charge is uniformly distributed on its surface . The lines of forces are also uniformly  distributed on all directions . They repel each other so they emerge perpendicular to the surface so that they do nor cut each other and at the same time they remain at maximum distance from each other.

Answer:

Materials that allow electricity to pass through them are called conductors.

Copper wire is a good conductor. Materials that do not allow electricity to pass through them are called insulators.

Explanation:

Can I have brainliest?

Answer:

Explanation:

Force between two charges of q₁ and q₂ at distance d is given by the expression

F = k q₁ q₂ / d₂

Here force between charge q₁ = - 15 x 10⁻⁹ C and q₃ = 47 x 10⁻⁹ C when distance between them d = (1.66 - 1.24 ) = .42 mm

k = 1/ 4π x 8.85 x 10⁻¹²

putting the values in the expression

F = 1/ 4π x 8.85 x 10⁻¹²  x - 15 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 9 x 10⁹ x  - 15 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 35969.4 x 10⁻³ N .

force between charge q₂ =  34.5 x 10⁻⁹ C and q₃ = 47 x 10⁻⁹ C when distance between them d = ( 1.24 - 0 ) = 1.24 mm .

putting the values in the expression

F = 1/ 4π x 8.85 x 10⁻¹²  x  34.5 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 9 x 10⁹ x  - 34.5 x 10⁻⁹ x 47 x 10⁻⁹ /( .42 x 10⁻³)²

= 82729.6  x 10⁻³ N

Both these forces will act in the same direction towards the left (away from the origin towards - ve x axis)

Total force = 118699 x 10⁻³

= 118.7 N.