Explanation:
d=ut+5
d-5=ut
d-5/t=u
!!!!!!!
Chemistry Grade 11: Hi, I don't know what this is, please help?
CALCULATING % YIELD STEPS:
1.
2.
3.
4.
Answer:
1. Write the balanced chemical equation for the reaction
2. Identify all important information provided in the word problems or data table.
3. Solve for the theoretical yield of the reaction, following all the steps of a stoichiometry calculation organizer. Use two calculations if both reactants are provided.
4. Use the percent yield equation to calculate the percent yield of the reaction.
Explanation:
its comes right from the 5.06 lesson
When metal X is treated with sodium hydroxide, a white precipitate A is obtained which is soluble in excess NaOH to give a soluble complex B. Compound A is soluble in dilute HCl to form compound C. When the compound A is heated strongly it gives compound D which is used to extract metal. a) Identify X, A, B, C, D supporting your answer(s) with appropriate chemical reactions. b) At which group and period does X fall?
Answer:
See explanation
Explanation:
If we look at the question closely, we will notice that the metal in question must be aluminum.
When aluminum is treated with sodium hydroxide, a precipitate, aluminium hydroxide is formed as follows;
Al(s) + 3NaOH(aq) ---> Al(OH)3(s) + 3Na(s)
In excess sodium hydroxide, the precipitate dissolves as follows;
Al(OH)3(s) + NaOH(aq) ----> [NaAlOH4]^-(aq)
The complex formed is sodium aluminum tetrahydroxo aluminate III.
The reaction of aluminum faith dilute hydrochloric acid occurs as follows to yield aluminum chloride;
2Al(s) + 6HCl(aq) ----> 2AlCl3(aq) + 3H2(g)
When aluminum metal is heated strongly, it yields aluminum oxide;
2Al(s) + 3O2(g) ---> Al2O3(s)
What are the main modifications of John Dalton's atomic theory
Fabric A is used to rub a wooden rod. A second piece of Fabric A is used to rub an ebonite rod. It is observed that the wooden rod and the ebonite rod attract one another. What can you say about the position of Fabric A in the electrostatic series in relation to wood and ebonite?
Fabric A is likely to be a material that has a moderate tendency to gain electrons when in contact with other materials and is lower in the electrostatic series than ebonite but higher than wood.
What is electrostatic series?The electrostatic series is a list of materials ranked in order of their tendency to gain or lose electrons when in contact with another material.
Materials higher in the series tend to lose electrons more readily and become positively charged, while materials lower in the series tend to gain electrons more readily and become negatively charged.
Ebonite is a synthetic polymer that is known to become negatively charged when rubbed, and it is typically placed near the top of the electrostatic series.
Wood, on the other hand, is a poor conductor of electricity and does not readily become charged when rubbed. Based on these facts, we can infer that Fabric A is lower in the electrostatic series than ebonite, but higher than wood.
To learn more about an electrostatic series, follow the link:
https://brainly.com/question/31065393
#SPJ2
2) If the density of chloroform is 1.48 g/mL, what is the volume of 541 g of chloroform?
Answer:
V = 365.54 mL
Explanation:
Given that,
The density of chloroform, d = 1.48 g/mL
The mass of chloroform, m = 541 g
We need to find the volume of chloroform.
We know that,
Density = mass/volume
So,
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{541\ g}{1.48\ g/mL}\\\\=365.54\ mL[/tex]
So, the volume of chloroform is 365.54 mL.
A 420 mL sample of a 0.100 M formate buffer, pH 3.75, is treated with 7 mL of 1.00 M KOH. What is the pH following this addition? (pKa for formic acid is 3.75)
Answer: The pH of the resulting solution will be 3.60
Explanation:
Molarity is calculated by using the equation:
[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex] ......(1)
We are given:
Molarity of formic acid = 0.100 M
Molarity of potassium formate = 0.100 M
Volume of solution = 420 mL = 0.420 L (Conversion factor: 1 L = 1000 mL)
Putting values in equation 1, we get:
[tex]\text{Moles of formic acid}=(0.100mol/L\times 0.420L)=0.0420mol[/tex]
[tex]\text{Moles of potassium formate}=(0.100mol/L\times 0.420L)=0.042mol[/tex]
Molarity of KOH = 1.00 M
Volume of solution = 7 mL = 0.007 L
Putting values in equation 1, we get:
[tex]\text{Moles of KOH}=(1mol/L\times 0.007L)=0.007mol[/tex]
The chemical equation for the reaction of formic acid and KOH follows:
[tex]HCOOH+KOH\rightleftharpoons HCOOK+H_2O[/tex]
I: 0.042 0.007 0.042
C: -0.007 -0.007 +0.007
E: 0.035 - 0.049
Volume of solution = [420 + 7] = 427 mL = 0.427 L
To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:
[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex] .......(2)
Given values:
[tex][HCOOK]=\frac{0.049}{0.427}[/tex]
[tex][HCOOH]=\frac{0.035}{0.427}[/tex]
[tex]pK_a=3.75[/tex]
Putting values in equation 2, we get:
[tex]pH=3.75-\log \frac{(0.049/0.427)}{(0.035/0.427)}\\\\pH=3.75-0.146\\\\pH=3.60[/tex]
Hence, the pH of the resulting solution will be 3.60
What are the TWO characteristics of an effective collision?
Answer:
the TWO characteristics of an effective collision are:
1.Molecules collide with sufficient energy
2.Molecules collide with the proper orientation.
During a reaction in an aqueous solution, the concentration of bactants
decreases and the amount of products increases. How do these changes in
concentration affect the reaction rate?
A. The reaction rate decreases.
B. The reaction rate varies unpredictably.
C. The reaction rate increases.
D. The reaction rate stays the same.
Answer:
my define it will be turst me is c
Which of the following is NOT true about soil? *
Calculate the energy in kj/mol of photon in red light of wavelength 656nm
Answer:
you don't know the answer?ha me too
A 0.15 M solution of BaCl2 contains: Group of answer choices 0.30 M Ba2 ions and 0.30 M Cl- ions. 0.15 M Ba2 ions and 0.15 M Cl- ions. 0.30 M Ba2 ions and 0.15 M Cl- ions. 0.15 M Ba2 ions and 0.30 M Cl- ions. none of the above
Answer:
0.15 M Ba⁺² ions and 0.30 M Cl⁻ ions
Explanation:
The dissociaton of barium chloride is as follows:
BaCl₂ → Ba²⁺ + 2Cl⁻
By observing the stoichiometric coefficients, we can tell that the number of moles of Ba²⁺ is the same as the number of moles of BaCl₂, while the number of moles of Cl⁻ is the double of that.
PLZZZ HELPPPPPPPPPPPPPPPP
The rate of the reaction is 1.6*10-2 M/s when the concentration of A is 0.15 M. Calculate the rate constant if the reaction is (a) first order in A and (b) second order in A.
Answer:
[tex]k_1=0.107s^{-1} \\\\k_2=0.711M^{-1}s^{-1}[/tex]
Explanation:
Hello there!
In this case, according to the given information and the attached picture in which we can see the units of the rate constant, it turns out possible for us to realize the two called rate laws are:
[tex]r=k[A]\\\\r=k[A]^2[/tex]
The former is first-order and the latter second-order; in such a way, we solve for the rate constant in both cases to obtain the following:
[tex]k=\frac{r}{[A]}=\frac{1.6x10^{-2}M/s}{0.15M}=0.107s^{-1} \\\\k=\frac{r}{[A]^2}=\frac{1.6x10^{-2}M/s}{(0.15M)^2}=0.711M^{-1}s^{-1}[/tex]
Regards!
Define solubility. a solid that does not dissolve in a gas the amount of a substance that will dissolve in a given amount of solvent the amount of a substance that will dissolve in a given amount of solute a liquid that does not dissolve in another liquid a solid mixed with another solid
Answer:
the amount of a substance that will dissolve in a given amount of solvent.
Explanation:
Solubility is a term used to describe how readily a substance can be dissolved in a solvent to form a solution. Thus, a substance is said to be soluble if it dissolves completely in a solvent and insoluble if it doesn't dissolve or only dissolves partially.
For example, sodium chloride (NaCl) when mixed with water dissociates into sodium and chloride ions. Thus, salt (sodium chloride) is said to be soluble because it dissolves completely in water.
Furthermore, a compound that dissolves completely in water to produce an aqueous solution is said to be soluble in water.
In conclusion, solubility is simply the amount of a substance such as salt, that will dissolve in a given amount of solvent. A solvent is any liquid such as water, coffee, tea, etc., that dissolves a liquid, gaseous, or solid solute to produce a solution.
The half life for the radioactive decay of potassium-40 to argon-40 is 1.26×109 years. Suppose nuclear chemical analysis shows that there is 0.359 mmol of argon-40 for every 1.000mmol of potassium-40 in a sample of rock. Calculate the age of the rock.
Answer:
2.42x10⁹ years is the age of the rock
Explanation:
The decay of an isotope follows the equation:
Ln[A] = -kt + Ln[A]₀
Where [A] is amount of isotope after time t, k is decay constant and [A]₀ is the initial amount of the isotope
To find decay constant from half-life:
k = ln2 / half-life
k = ln2 / 1.26x10⁹years
k = 5.501x10⁻¹⁰ years⁻¹
As in the reaction, K-40 produce Ar-40:
[A] = 0.359mmol
[A]₀ = 0.359mmol + 1.000mmol = 1.359mmol
Replacing:
Ln[0.359mmol] = -5.501x10⁻¹⁰ years⁻¹t + Ln[1.359mmol]
-1.3312 = -5.501x10⁻¹⁰ years⁻¹t
t = 2.42x10⁹ years is the age of the rock
Potassium Chlorate decomposes according to the reaction below.
2KClO3(s) 2KCl(s) + 3O2(g)
A 4.35 g sample of KClO3 is heated and the O2 gas produced by the reaction is collected in an evacuated flask. What is the volume of the O2 gas if the pressure of the flask is 0.75 atm and the gas temperature is 27oC? R=0.0821 (L*atm)/(mol*K)
Answer:
1.75L
Explanation:
Reaction of decomposition is:
2KClO₃(s) → 2KCl(s) + 3O₂(g)
We determine moles of salt:
4.35 g . 1 mol /122.55 g = 0.0355 moles
Ratio is 2:3. 2 moles of salt can produce 3 moles of oxygen
Then, our 0.0355 moles of chlorate may produce (0.0355 . 3)/ 2 = 0.0532 moles.
We have determined, moles of gas and we have data of pressure and temperature. To find out the volume, we apply the Ideal Gases Law:
We convert T° from °C to K → 27°C + 273 = 300K
P . V = n . R . T
0.75 atm . V = 0.0532 mol . 0.0821 L.atm/mol.K . 300K
V = (0.0532 mol . 0.0821 L.atm/mol.K . 300K) / 0.75 atm
V = 1.75 Liters
10-Concentration is the amount of a substance in a predefined volume of space. The basic measurement of concentration in chemistry is molarity or the number of moles of solute per liter of solvent. What is the molarity of a solution containing 9.478 grams of Rucl, in enough water to make 1.00 L of solution?
Answer:
0.0457 M
Explanation:
Concentration is the amount of a substance in a predefined volume of space. The basic measurement of concentration in chemistry is molarity or the number of moles of solute per liter of solution. What is the molarity of a solution containing 9.478 grams of RuCl₃, in enough water to make 1.00 L of solution?
Step 1: Given data
Mass of RuCl₃ (solute): 9.478 gVolume of solution: 1.00 LStep 2: Calculate the moles corresponding to 9.478 g of RuCl₃
The molar mass of RuCl₃ is 207.4 g/mol.
9.478 g × 1 mol/207.4 g = 0.04570 mol
Step 3: Calculate the molarity of the solution
We will use the definition of molarity.
M = moles of solute / liters of solution
M = 0.04570 mol / 1.00 L = 0.0457 M
A chemist requires a large amount of 1-bromo-4-phenyl-2-butene as starting material for a synthesis and decides to carry out the following NBS allylic bromination reaction in the presence of UV light. Draw the structures of all of the observed products.
NBS
(C6H5)CH2CH = CHCH3 → ?
CCI4
Draw one additional resonance structure for the species below:
CH3CH=CHCH=CHCH=CHCH2
Answer:
CH 2 CH 3 CHCH = C6H5 + 5 Hydrogen Atoms
I hope I helped you.
Deepest apologies if I was wrong!
Bye!
~ Myaka O.
Phosphorus pentachloride, PCl5, a white solid that has a pungent, unpleasant odor, is used as a catalyst for certain organic reactions. Calculate the number of moles in 38.7 g of PCl5.
Answer:
0.186 moles
Explanation:
In order to convert grams of PCl₅ into moles, we need to use its molar mass:
Molar Mass of PCl₅ = Molar mass of P + (Molar mass of Cl)*5Molar Mass of PCl₅ = 208.24 g/molThen we proceed to calculate the number of moles:
38.7 g ÷ 208.24 g/mol = 0.186 molThere are 0.186 moles of PCl₅ in 38.7 g of PCl₅.In the given question Phosphorus pentachloride is used as a catalyst for certain chemical reaction. 38.7 g of [tex]\rm PCl_5[/tex], there are 0.186 moles of [tex]\rm PCl_5[/tex].
A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.
To calculate the number of moles in 38.7 g of [tex]\rm PCl_5[/tex], we need to divide the given mass of [tex]\rm PCl_5[/tex] by its molar mass.
The molar mass of [tex]\rm PCl_5[/tex] can be calculated by adding the atomic masses of one phosphorus atom and five chlorine atoms:
Molar mass of [tex]\rm PCl_5[/tex] = (1 x atomic mass of P) + (5 x atomic mass of Cl)
= (1 x 30.97 g/mol) + (5 x 35.45 g/mol)
= 208.22 g/mol
Now, we can calculate the number of moles of [tex]\rm PCl_5[/tex]:
Number of moles = mass / molar mass
= 38.7 g / 208.22 g/mol
= 0.186 moles
Therefore, there are 0.186 moles of [tex]\rm PCl_5[/tex] in 38.7 g of [tex]\rm PCl_5[/tex].
Learn more about catalyst here:
https://brainly.com/question/24430084
#SPJ6
Question 11
1 pts
A solution is formed by dissolving 45 grams of NH4Cl in
100 grams of H20 at 70°C. Which statement correctly
describes this solution?
O NH4Cl is the solute, and the solution is saturated.
O NH4Cl is the solute, and the solution is unsaturated.
o NH4Cl is the solvent, and the solution is unsaturated.
O NH4Cl is the solvent, and the solution is saturated.
< Previous
Answer:
NH4Cl is the solute, and the solution is unsaturated.
Explanation:
To create a saturated solution of ammonium chloride at 70°C, we need to dissolve 62 g of ammonium chloride in 100 g of water.
The question tells us that 45 grams of NH4Cl was dissolved in 100 grams of H20 at 70°C. This creates an unsaturated solution since the amount of solute present is less than the amount of solute that the NH4Cl solution can normally hold at 70°C.
Hence, NH4Cl is the solute, and the solution is unsaturated.
Match each term with the best description.
a. The electrode where oxidation occurs
b. A device that produces electricity
c. The connection between two half-cells
d. The electrode where reduction occurs
e. A device that consumes electricity
f. A device that utilizes redox reactions to either consume or produce electricity
1. Anode
2. Cathode
3. Electrolytic cell
4. Electrochemical
5. Galvanic cell
6. Salt bridge
Answer:
Match each term with the best description.
a. The electrode where oxidation occurs: Anode
b. A device that produces electricity: Galvanic cell
c. The connection between two half-cells: salt bridge
d. The electrode where reduction occurs: Cathode
e. A device that consumes electricity: Electrolytic cell
f. A device that utilizes redox reactions to either consume or produce electricity: Electrochemical cell.
Explanation:
a.The electrode where oxidation occurs is called the anode.
Oxidation is losing of electrons.
b. Galvanic cell produces electricity by using redox chemical reaction.
It is also called a voltaic cell or electrochemical cell.
c. The connection between two cells is called a salt bridge.
It will not allow the solutions to diffuse with each other.
It maintains electrical neutrality.
d. The electrode where reduction occurs: Cathode
Reduction means the gaining of electrons.
e. Electrolytic cell is the one that consumes electricity and then produces a chemical change.
f. A device that utilizes redox reactions to either consume or produce electricity: Electrochemical cell.
The acid dissociation constant, Ka, of HNO3 is 4.0 x104. What does the ka
value indicate about this compound?
A. HNO3 is neither an acid nor a base,
B. HNO3 is a strong acid.
C. HNO3 is a weak acid
D. HNO3 is a strong base.
Answer:
i thing its b
Explanation:
The acid dissociation constant (Ka) is a measure of the strength of an acid in solution. In HNO₃ (nitric acid), the given Ka value is 4.0 x 10⁴. It represents the equilibrium constant for the dissociation reaction of an acid in water. Therefore, option B is correct.
The dissociation constant often denoted as Kd, is a measure of the strength of the interaction between a ligand and a receptor or between a substrate and an enzyme.
A high Ka value indicates a strong acid, while a low Ka value indicates a weak acid. In this case, the Ka value of 4.0 x 10⁴ for HNO₃ is relatively high.
To learn more about the dissociation constant, follow the link:
https://brainly.com/question/28197409
#SPJ6
Spell out the full name of the compound.
Submit
Help plz
Explanation:
A=Butan-2-one
B=Pentan-3-one
A student collecting CaCO3 produced by the reaction of Na2CO3(aq) and CaCl2(aq) obtains a percent yield of 81%. Choose all of the following observations that could explain the low yield.
a. The combined reactants were not stirred before filtering the precipitate.
b. The student did not completely dry the precipitate before weighing it.
c. The precipitate was not washed prior to drying.
d. A rubber policeman was not used to scrape precipitate from the beaker.
e. The filter paper was not wetted with water prior to filtering the precipitate.
Answer:
a, d and e. are true.
Explanation:
The reaction that occurs is:
Na2CO3(aq) + CaCl2(aq) → CaCO3(s) + 2NaCl
In ideal conditions, the percent yield of the reaction must be 100%. All explanations about why the student could not collect all precipitate are right:
a. The combined reactants were not stirred before filtering the precipitate. Not stirring could not promote all the reaction. TRUE.
b. The student did not completely dry the precipitate before weighing it. If the student don't dry the precipitate, the mass of precipitate must be higher producing a percent yield > 100%. FALSE.
c. The precipitate was not washed prior to drying. Produce more mass. FALSE.
d. A rubber policeman was not used to scrape precipitate from the beaker. If the student doesn't collect all the precipitate the percent yield could be < 100%.. TRUE.
e. The filter paper was not wetted with water prior to filtering the precipitate. TRUE. If you don't wet the filter paper you can lose a part of precipitate from the walls of this one.
A steel with a critical fracture toughness of 150 MPa.m1/2 has a yield strength of 1500 MPa. If fracture were to take place at the yield stress, answer the following questions.
Surface crack size at yielding leading to failure is:_____________.
a. 0.497 cm
b. 0.994 cm
c. 0.32 cm
Answer:
c.
Explanation:
From the given information:
Critical fracture toughness [tex]K_{IC}[/tex] = 150 MPa.[tex]m ^{1/2}[/tex]
yield strength [tex]\sigma[/tex] = 1500 MPa
surface crack size [tex]a_c[/tex] = ???
The formula for the fracture toughness is can be expressed as:
[tex]K_{IC}= \sigma \sqrt{\pi a_c}[/tex]
replacing our values to solve for the surface crack size, we have:
[tex]150= 1500 \sqrt{\pi a_c}[/tex]
[tex]\dfrac{150}{ 1500} = \sqrt{\pi a_c}[/tex]
[tex]\dfrac{0.1}{1.77} = \sqrt{ a_c}[/tex]
[tex]a_c[/tex] = 0.0564²
[tex]a_c[/tex] = 0.0032 m
[tex]a_c[/tex] = 0.32 cm
In Denver, Colorado the elevation is about 5,280 feet above sea level. Explain what potential effects this may have on the solubility of a gaseous solute in a liquid solution.
Answer:
The solubility of the gaseous solute decreases
Explanation:
As we know, pressure decreases with altitude. This means that, at higher altitudes, the pressure is much lower than it is at sea level.
The solubility of a gas increases with increase in pressure and decreases with decrease in pressure.
Hence, in Denver, Colorado where the elevation is about 5,280 feet above sea level, a gaseous solute is less soluble than it is at sea level due to the lower pressure at such high altitude.
Calcular el pH de una disolución cuando 10 g de NaOH se diluyen con agua hasta un volumen final de 250 ml
Answer:
My nettttttworkkkk is slowww
if 7.90 mol of C5H12 reacts with excess O2, how many moles of CO2 will be produced by the following combustion reaction?
Answer:
If 7.9 moles of C₅H₁₂ reacts with excess O₂, 39.5 moles of CO₂ will be produced.
Explanation:
The balanced reaction is:
C₅H₁₂ + 8 O₂ → 5 CO₂ + 6 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
C₅H₁₂: 1 moles O₂: 8 molesCO₂: 5 moles H₂O: 6 molesThen you can apply the following rule of three: if by stoichiometry 1 mole of C₅H₁₂ produces 5 moles of CO₂, then 7.9 moles of C₅H₁₂ will produce how many moles of CO₂?
[tex]amount of moles of CO_{2} =\frac{7.9 moles of C_{5}H_{12}*5 moles of CO_{2} }{1 mole of C_{5}H_{12} }[/tex]
amount of moles of CO₂= 39.5 moles
If 7.9 moles of C₅H₁₂ reacts with excess O₂, 39.5 moles of CO₂ will be produced.
When stirred in 30°C water, 5 g of powdered potassium bromide, KBr, dissolves faster than 5 g of large crystals of potassium bromide. Which of the following best explains why the powdered KBr dissolves faster?
A. Potassium ions and bromide ions in the powder are smaller than potassium ions and bromide ions in the large crystals.
B. Powdered potassium bromide exposes more surface area to water molecules than large crystals of potassium bromide.
C. Fewer potassium ions and bromide ions have been separated from each other in the powder than in the crystals.
D. Powdered potassium bromide is less dense than large crystals of potassium bromide.
Answer:
B
Explanation:
Do diện tích tiếp xúc ở dạng bột cao hơn dạng tinh thể
Calculate the pressure exerted by 40 g of oxygen enclosed in a 1litre flask at 25°C. (0=16) (3 Marks)
Answer:
I don't know sorry siso
Explanation:
I don't know
