Lab Experiment
Field Experiment
Natural Experiment.
Answer:
Experimental research for individuals in the physical sciences and many other fields is the best-known kind of research design. The main reason is that experimental research is a typical scientific experiment, similar to that carried out in secondary schools.
Explanation:
The types of research designs are determined by how the researchers assign subjects to various conditions and groups. They are of three different types: pre-experimental, almost experimental, and real experimental research.
Pre-experimental Research Design:-
In pre-experimental research, the effect of the application of a supposedly changing independent variable is observed by either a group or different dependent groups. It is the simplest form of experimental design and does not involve a control group.
Quasi-experimental Research Design:-
The term "almost" refers to partial, half, or pseudo. The quasi-experimental research therefore resembles, but not the same, the real experimental research. The participants are not assigned randomly in quasi-examples and are therefore used in environments that are difficult or unable to randomize.
True Experimental Research Design:-
To confirm or refute a hypothesis, real experimental research is based on statistical analyses. It is the most exact experimental type and can be performed on two randomly assigned subjects with, or without a pretest.
The true experimental design of the research must include a control group, a variable that the researcher can manipulate and the distribution must be random.
Which of the following BEST describes an inside attacker?
An agent who uses their technical knowledge to bypass security.
An attacker with lots of resources and money at their disposal.
A good guy who tries to help a company see their vulnerabilities.
An unintentional threat actor. This is the most common threat.
The inside attacker should be a non-intentional threat actor that represents the most common threat.
The following information related to the inside attacker is:
It is introduced by the internal user that have authorization for using the system i.e. attacked.It could be intentional or an accidental.So it can be non-intentional threat.Therefore we can conclude that The inside attacker should be a non-intentional threat actor that represents the most common threat.
Learn more about the threat here: brainly.com/question/3275422
3. Coaxial/telephone cable sends
during the data transmission
signal
Answer:
high frequency signal.
Where does change management play a major role in transforming a client
business into a data-driven, intelligent enterprise?
To manage a modern IT environment characterized by hybrid complexity and exponential data growth — and to make that same IT a driver of growth and innovation for the business — you need to build intelligence into every layer of your infrastructure.
Change management plays a major role in transforming a client business into a data-driven, intelligent enterprise in: data culture and literacy.
Data culture and literacy refer to all the processes involved in analyzing and understanding data within the framework of an organization.
The employees within such organizations are trained to read and understand data. It becomes a part of the organization's culture.
So data culture and literacy should be used when trying to transform a client business into a data-driven, intelligent enterprise.
Learn more about data culture here:
https://brainly.com/question/21810261
In database a record is also called a
Explanation:
hope it helps you
pls mark this ans brainlist ans
What do you do if your computer dies/malfunctions? Reboot (Restart) Shut Down Recovery CD and Recover your system Call a person to fix it
Answer:
Restart
Explanation:
Simply I may restart my pc if it dies/malfunctions. I'll not restart immediately, I'll wait for an hour and do restart my computer. If it doesn't work then maybe I'll Call a person to fix it.
you get a call from a customer who says she can't access your site with her username and password. both are case-sensitive and you have verified she is entering what she remembers to be her user and password correctly. what should you do to resolve this problem?
a. have the customer clear her browser history and retry
b. look up her username and password, and inform her of the correct information over the phone
c. have the user reboot her system and attempt to enter her password again
d. reset the password and have her check her email account to verify she has the information
Answer:
answer would be D. I do customer service and would never give information over the phone always give a solution
In order to resolve this problem correctly, you should: D. reset the password and have her check her email account to verify she has the information.
Cybersecurity can be defined as a group of preventive practice that are adopted for the protection of computers, software applications (programs), servers, networks, and data from unauthorized access, attack, potential theft, or damage, through the use of the following;
Processes.A body of technology.Policies.Network engineers.Frameworks.For web assistance, the security standard and policy which must be adopted to enhance data integrity, secure (protect) data and mitigate any unauthorized access or usage of a user's sensitive information such as username and password, by a hacker, is to ensure the information is shared discreetly with the user but not over the phone (call).
In this context, the most appropriate thing to do would be resetting the password and have the customer check her email account to verify she has the information.
Read more: https://brainly.com/question/24112967
Write a pseudocode For loop that displays all the numbers from 0 to 5, one at a time. We have the following pseudocode so far. Declare Integer number Write this statement Display number End For Type the exact text for the line of pseudocode that should replace Write this statement shown above.
Answer:
The statement is:
For number = 0 to 5
Explanation:
Given
The incomplete pseudocode
Required
The loop statement to complete the pseudocode
To loop from 0 to 5, we make use of:
For number = 0 to 5
Where:
number is the integer variable declared on line 1
So, the complete pseudocode is:
Declare Integer number
For number = 0 to 5
Display number
End For
3. Which property is used to select full Row of data grid view
a) Select Mode b) Mode Selection c) Selection Mode d) Mode Select
Answer:
I think a is correct answer.
You have n warehouses and n shops. At each warehouse, a truck is loaded with enough goods to supply one shop. There are m roads, each going from a warehouse to a shop, and driving along the ith road takes d i hours, where d i is an integer. Design a polynomial time algorithm to send the trucks to the shops, minimising the time until all shops are supplied.
Following are the steps of the polynomial-time algorithm:
Split the routes according to their categorizationAssuming that mid = di of the middle road, low = road with the least di, and high = road with the highest di, we may do a binary search on the sorted list.All shops must be approachable only using these roads for every road, from low to mid.Check if all shops can be reached from[tex]\bold{ low \ to\ mid+1}[/tex] using only these roads.There is a solution if every shop can be reached by road only up to [tex]\bold{mid+1}[/tex], but not up to mid.You can [tex]\bold{set \ low = mid+1}[/tex] if all businesses aren't accessible using both [tex]\bold{mid\ and\ mid+1}[/tex] roads.If every shop could be reached using both mid and mid+1, then set high to mid-1.With these layouts of businesses and roads, no response can be given because [tex]\bold{ low > high}[/tex]You can do this by [tex]\bold{set\ mid = \frac{(low + high)}{2}}[/tex]The new low, mid, and high numbers are used in step (a).In a minimum amount of time, this algorithm will determine the best strategy to supply all shops.
Learn more:
polynomial-time algorithm: brainly.com/question/20261998
Components of micro computer with diagram
Answer:
CPU, Program memory, Data memory, Output ports, Input ports and Clock generator.
Explanation:
There are six basic components of a microcomputer which includes CPU, Program memory, Data memory, Output ports, Input ports and Clock generator. CPU is the central processing unit which is considered as the brain of the computer. It is the part of a computer that executes instructions. Data memory is the place where data is stored that is present in the CPU.
Discuss the OSI Layer protocols application in Mobile Computing
Answer:
The OSI Model (Open Systems Interconnection Model) is a conceptual framework used to describe the functions of a networking system. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.
Discuss the DMA process
Answer:
Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).
Explanation:
A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.
In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.
ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.
ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.
A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:
I/O addresses Memory addresses. Interrupt request numbers (IRQ). Direct memory access (DMA) channels.DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.
A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.
With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.
In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.
However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.
Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.
Answer:
See explanation
Explanation:
DMA [tex]\to[/tex] Direct Memory Access.
The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.
The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.
what is computer with figure
Answer:
A computer is an electronic device that accept raw data and instructions and process it to give meaningful results.
explain the working principle of computer? can anyone tell
Answer:
input process and output hehe
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah….
a. Margin
b. View
c. LayOut
d. Paragraph
Office 92 sering disebut juga dengan….
a. Office 3.0
b. Office 7.0
c. Office Xp
d. Office 2.0
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah
B.View
Office 92 sering disebut juga dengan
A.Office 3.0
A test for logical access at an organization being audited would include: Group of answer choices Checking that the company has a UPS and a generator to protect against power outages Making sure there are no unmanaged third-party service level agreements Performing a walkthrough of the disaster recovery plan Testing that super user (SYSADMIN) access is limited to only appropriate personnel
Answer:
Testing that super user (SYSADMIN) access is limited to only appropriate personnel.
Explanation:
A test for logical access at an organization being audited would include testing that super user (SYSADMIN) access is limited to only appropriate personnel.
As the first step, load the dataset from airline-safety.csv by defining the load_data function below. Have this function return the following (in order):
1. The entire data frame
2. Total number of rows
3. Total number of columns
def load_data():
# YOUR CODE HERE
df, num_rows, num_cols
Answer:
import pandas as pd
def load_data():
df = pd.read_csv("airline-safety.csv')
num_rows = df.shape[0]
num_cols = df.shape[1]
return df, num_rows, num_cols
Explanation:
Using the pandas python package.
We import the package using the import keyword as pd and we call the pandas methods using the dot(.) notation
pd.read_csv reads the csv data into df variable.
To access the shape of the data which is returned as an array in the format[number of rows, number of columns]
That is ; a data frame with a shape value of [10, 10] has 10 rows and 10 columns.
To access the value of arrays we use square brackets. With values starting with an index of 0 and so on.
The row value is assigned to the variable num_rows and column value assigned to num_cols
A sinewave has a period (duration of one cycle) of 645 μs. What is the corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures?
please help me figure this out I am so confused
The corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures is: 155 kHz.
Given the following data:
Period = 645 μsNote: μs represents microseconds.
Conversion:
1 μs = [tex]1[/tex] × [tex]10^{-6}[/tex] seconds
645 μs = [tex]645[/tex] × [tex]10^{-6}[/tex] seconds
To find corresponding frequency of this sinewave, in kHz;
Mathematically, the frequency of a waveform is calculated by using the formula;
[tex]Frequency = \frac{1}{Period}[/tex]
Substituting the value into the formula, we have;
[tex]Frequency = \frac{1}{645\; * \;10^{-6}}[/tex]
Frequency = 1550.39 Hz
Next, we would convert the value of frequency in hertz (Hz) to Kilohertz (kHz);
Conversion:
1 hertz = 0.001 kilohertz
1550.3876 hertz = X kilohertz
Cross-multiplying, we have;
X = [tex]0.001[/tex] × [tex]1550.39[/tex]
X = 155039 kHz
To 3 significant figures;
Frequency = 155 kHz
Find more information: https://brainly.com/question/23460034
Alexis received an email message from an unknown sender that included an attachment.
If she opens the attachment, what kind of malicious software might be activated, and what are the consequences?
Opening the attachment would release a worm, which would infect her system with a virus.
Opening the attachment would release a worm, which would infect her system with spyware.
Opening the attachment would release an active worm, which would infect her system with adware.
Opening the attachment would release a passive worm, which would infect her system with adware.
Answer:
Opening the attachment would release a worm, which would infect her system with a virus.
Answer: B. Opening the attachment would release a worm, which would infect her system with a virus.
Write a program that takes a date as input and outputs the date's season. The input is an integer to represent the month and an integer to represent the day. Ex: If the input is: 4 11 the output is: spring In addition, check if both integers are valid (an actual month and day). Ex: If the input is: 14 65 the output is: invalid The dates for each season are: spring: March 20 - June 20 summer: June 21 - September 21 autumn: September 22 - December 20 winter: December 21 - March 19
Answer:
Explanation:
The following program is written in Java. It is a function that takes in the two parameters, combines them as a String, turns the combined String back into an integer, and uses a series of IF statements to check the parameters and determine which season it belongs to. Then it prints the season to the screen. The code has been tested with the example provided in the question and the output can be seen in the attached image below.
class Brainly {
public static void main(String[] args) {
getSeason(4, 65);
getSeason(4, 11);
}
public static void getSeason(int month, int day) {
String combined = String.valueOf(month) + String.valueOf(day);
int combinedInt = Integer.parseInt(combined);
if ((month > 0 && month < 12) && (day > 0 && day < 31)) {
if ((combinedInt >= 320) && (combinedInt <= 620)) {
System.out.println("The Season is Spring");
} else if ((combinedInt >= 621) && (combinedInt <= 921)) {
System.out.println("The Season is Summer");
} else if ((combinedInt >= 922) && (combinedInt <= 1220)) {
System.out.println("The season is Autumn");
} else {
System.out.println("The Season is Winter");
}
} else {
System.out.println("Invalid date");
}
}
}
e) Point out the errors( if any) and correct them:-
class simple
{
inta,b,c;
double sumNumber
{
int d = a + b + c;
double e = d/5.6;
return e;
}
void show Number()
{
a = 10, b = 20, c=5;
System.out.println(d);
double f = sumNumber(a,b,c);
System.out.print(e);
}
}
Explanation:
double e-d/5.6;is wrong it should return to c
5 Major of computer application
Answer:
Basic Applications of Computer
1 ) Home. Computers are used at homes for several purposes like online bill payment, watching movies or shows at home, home tutoring, social media access, playing games, internet access, etc.
2 ) Medical Field.
3 ) Entertainment.
4 ) Industry.
5 ) Education.
Explanation:
Hope it helps you
Mark my answer as brainlist
have a good day
How can an IS managers keep up with the endless demand for more software to support new information systems
An IS manager can keep up with the endless demand for more software to support new information systems by thinking outside the box.
To think outside the box, the IS manager should try the following strategies:
Use predetermined application components that are operating on low-code or no-code platforms.Use better software-testing practices and tools that spread programming into small sprints.Engage in shift-left testing, which enables software-testing to be done at every phase of the development process.Involve product managers and business users at the beginning of software development, making them to drive innovation that satisfies their requirements.Finally, the IS manager can utilize AI and Machine Learning to speed up the development of required software, thereby enhancing its qualities and capabilities with reduced time and costs.Thus, the IS manager must realize that there are always solutions to every software problem outside the mainstream box.
Learn more about information systems here: https://brainly.com/question/1521627
T
N
O
?
You can insert only the row
only to
True or false
false
Explanation:
good luck bro
have a great day
Answer:
false
Explanation:
g Add a throw statement to the processNumbers function that throws the message "An element in the list is not a number." if one of the elements in toProcess is not a number. Hint: The function isNaN() returns true if the parameter is not a number.
Answer and Explanation:
function processNumbers(alist){
var Ourarray= new array(alist);
Ourarray.foreach(
if(isNaN()){
Console.log( "An element in the list is not a number."};
break;
}
}
processNumbers(alist)
From the above, we have defined a function that takes an array parameter(the following array variable will make sure of that). We test each element in the array using foreach array function. The for each function runs the if statement and if isNan is true for each of the elements in the array.
Instructions
Create a multimedia project that contains the text element and all the contents that you have studied about that element
Answer:
iiiio888887776558777u765
A _______ read inputs the first data item from a file. It typically appears immediately before the loop that processes the data from the file and inputs the remaining data from the file.
Answer:
the answer is priming read
Explanation:
hope it helps u
A good machine should have the mechanical advantage of......?
Answer:
The ideal mechanical advantage (IMA) of an inclined plane is the length of the incline divided by the vertical rise, the so-called run-to-rise ratio. The mechanical advantage increases as the slope of the incline decreases, but then the load will have to be moved a greater distance.
Explanation:
Create a python program that display this
Factorial Calculator
Enter a positive integer: 5
5! = 1 x 2 x 3 x 4 x 5
The factorial of 5 is: 120
Enter a positive integer: 4
4! = 1 x 2 x 5 x 4
.
The factorial of 4 is: 24
Enter a positive integer: -5
Invalid input! Program stopped!
Answer:
vxxgxfufjdfhgffghgfghgffh
A computer has many resources. A resource can be memory, disk drive, network bandwidth, battery power, or a monitor. It can also be system objects such as shared memory or a linked list data structure. This principle is based in object-oriented programming (OOP). In OOP, a class definition encapsulates all data and functions to operate on the data. The only way to access a resource is through the provided interface. Which security principle are we referring to
Answer:
The security principle being referred to here is:
Resource Encapsulation.
Explanation:
Resource Encapsulation is one of the cybersecurity first principles. It allows access or manipulation of the class data as intended by the designer. The cybersecurity first principles are the basic or foundational propositions that define the qualities of a system that can contribute to cybersecurity. Other cybersecurity first principles, which are applied during system design, include domain separation, process isolation, modularization, abstraction, least principle, layering, data hiding, simplicity, and minimization.
