explain how angela can calculate the frictional torque applied to the wheel. state what apparatus is to be used.

While completing the pedulum experiment, you should measure the length of the pendulum to the middle of the pendulum bob to caculate the required values.

A ruler, meter stick, or measuring tape are necessary in order to determine the length of a pendulum. Start the measurement at the point where the string pivots from its attachment at the string's upper end. As you reach the item dangling from the string, the pendulum bob, measure all the way down to its center.

The smallest time intervals are measured using a pendulum clock. A little stone or metallic ball suspended from a stiff stand by a thread is the basic component of a pendulum. Bob is the name of the metallic ball.

Learn more about pedulum at:

https://brainly.com/question/30823177

#SPJ1

The applied force for the engine will be 24,450 N.

The applied force produced by the engine for a car weighing 12,500 n starting from rest and accelerating to 83.0 km/h in 5.00 s with a friction force of 1350 n is:

Applied force = (Mass x Acceleration) - Friction force

Applied force = (12,500 N x (83.0 km/h / 5.00 s)) - 1350 N

Applied force = 25,800 - 1350 N

Applied force = 24,450 N

To learn more about force, click here:

https://brainly.com/question/12970081

#SPJ11

The value of g, the acceleration due to gravity, is approximately 5 m/s2 or 10 n/kg.

To calculate g, we use the formula:

g = F/m

where g is the acceleration due to gravity, F is the force of gravity or weight, and m is the mass of the object.

Given that the mass of the object is 200 kg and the weight is 1000 N, we can plug in the values and solve for g:

g = 1000 N / 200 kg = 5 m/s2

Therefore, the value of g is approximately 5 m/s2 or 10 n/kg.

For more similar questions on acceleration:

brainly.com/question/25876659

#SPJ11

Due to the fact that they go against one or more of the aforementioned restrictions, options a), b), and c) are not permitted groups of quantum numbers.

An allowed set of quantum numbers must follow certain rules that govern the behavior of electrons in atoms. The principal quantum number (n) indicates the energy level of the electron, the angular momentum quantum number (l) indicates the shape of the orbital, and the magnetic quantum number (ml) indicates the orientation of the orbital in space. The values of n, l, and ml must all be integers, and they must also satisfy certain constraints.

Of the options given, only option d) n = 3, l = 2, ml = -1 is an allowed set of quantum numbers. This is because n = 3 indicates the electron is in the third energy level, l = 2 indicates that it is in a d orbital (since l = 0 corresponds to an s orbital, l = 1 corresponds to a p orbital, and so on), and ml = -1 indicates that the orbital is oriented in a specific direction in space.

Options a), b), and c) are not allowed sets of quantum numbers because they violate one or more of the constraints mentioned above.

To learn more about angular momentum refer to:

brainly.com/question/29716949

#SPJ4

The statement is True, A charge is passing through a static magnetic field. the velocity of the charge makes a 90o angle with the field. the force exerted by the magnetic field does work on the charge.

The magnetic force exerted on a moving charge with a velocity in the presence of a magnetic field is given by F = qvBsinθ

Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.

The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.

To learn more about Magnetic force visit here:

brainly.com/question/3160109

#SPJ4

(a) Free-body diagram of block is as given below. (b) Acceleration of the block is 2.529 m/s². (c) Speed of the block when it reaches the bottom of the incline is 3.18 m/s.

Frictionless surface is an invented concept of surface that is based on imagination and creative ideas of scientists where assumed friction of surface is zero.

(a) Free-body diagram of block is:

            /|

           / |

          /  | m

         / θ |

        /    |

       /_____|

        f ||

          ||

          ||

          ||

          \/

where m is mass of the block, θ is angle of inclination, f is force of friction (which is zero in this case), and g is acceleration due to gravity acting vertically downwards.

(b) The force acting along incline is component of the weight of block parallel to the incline, given by mg sin θ, where m is the mass of the block and g is acceleration due to gravity. Since there is no friction, this force is equal to net force acting on block, which is ma, where a is acceleration of block along the incline. Therefore,

mg sin θ = ma

a = g sin θ

a = 9.81 m/s² * sin 15.00 = 2.529 m/s²

Therefore, the acceleration of the block is 2.529 m/s².

(c) v² = u² + 2as

where u is the initial velocity (which is zero), s is the displacement (which is 2.00 m along the incline), and a is the acceleration (2.529 m/s²). Solving for v, we get:

v = √(2as) = √(2 * 2.00 m * 2.529 m/s²) = 3.18 m/s

Hence, speed of block when it reaches bottom of incline is 3.18 m/s.

To know more about frictionless surface, refer

https://brainly.com/question/25825478

#SPJ1

The void volume (Vo), which is represented by option E, is where molecules in SEC that are significantly smaller than the fractionation range of the Sephadex SP are anticipated to elute.

Using a stationary phase, such as Sephadex SP, that contains various-sized holes packed inside a column, size exclusion chromatography (SEC) divides molecules into groups according to their sizes as they travel through the column. Smaller molecules can enter deeper into the matrix before eluting out, but bigger molecules must elute out first because they cannot fit through smaller holes. Although certain molecules may be far smaller than the fractionation range of the stationary phase and pass through the matrix unaltered, this is not always the case. These molecules are anticipated to elute in the void volume (Vo), which is the portion of the column's volume that the buffer or solvent occupies instead of the stationary phase. As a result, Vo, option E, is the right response.

learn more about Sephadex here:

https://brainly.com/question/15570783

#SPJ4

"Water from photosynthesis provides the electrons for the light reactions in photosynthesis."

The process of photosynthesis is used by plants, algae, and some microbes to produce food from sunlight, carbon dioxide, and water. The substance chlorophyll can be found in an organelle called the chloroplast or in the membrane of organisms that can perform photosynthesis.

The light reactions and the dark reactions are the two major stages of photosynthesis. Utilize sunshine to produce the energy-containing molecules required for the dark reactions during the light reactions. Electrons from chlorophyll are excited to the electron transport pathway during the light reactions. The chlorophyll, which is loaded with electrons from water, has a hole left by the electrons. When water breaks apart, the chlorophyll fills with electrons, and two oxygen atoms join forces to create oxygen gas. The factory releases this as a waste product.

To know more about electrons:

https://brainly.com/question/30738225

#SPJ4

When a resistor is connected to a battery with a lower voltage, the amount of current flowing through it would decrease.

R is the resistance applied through the 6 volt cell. We obtain by replacing values. As a result, the potential difference across the 6V cell is 8.4 V. The voltage is the difference in potential between two sites in an electric field. In an electric field, the current is the movement of charges between two sites.

According to Ohm's Law

I = V/R

The current flowing through a 200 ohm resistor attached to a 12 V automotive battery is:

I = V/R

= 12 V / 200 ohms

= 0.06 A

Applying Ohm's Law once more, the new current would be:

I = V/R

= 6 V / 200 ohms

= 0.03 A

Therefore, When a resistor is connected to a battery with a lower voltage, the amount of current flowing through it would decrease.

To know more about resistor visit:-

https://brainly.com/question/24297401

#SPJ1

The best example that shows the potential energy is a body at rest from some height from the ground, thus the correct answer is option b.

Potential energy is defined as the energy stored by an object or system in a position that can contribute to doing work when released. It is the stored energy of an object or system.

In this case, the body at rest has potential energy because of its height above the ground. As it falls, the potential energy is converted to kinetic energy.

Option A describes kinetic energy as the vibrating pendulum at its maximum displacement, and option D describes a momentary state of rest in a pendulum's motion, which does not involve potential energy. Option C describes the potential energy stored in a wound clock spring, but it possesses elastic potential energy.

Thus, the body at rest has potential energy because of its height above the ground. Thus, option b is correct.

Learn more about Potential energy here:

https://brainly.com/question/14427111

#SPJ11

Answer:

The mass remains the same since stoichiometrically one mole reacts and one mole is formed

Explanation:

Calcium chloride is reacting with Sodium sulphate to form a white precipitate of calcium sulphate.

[tex]{ \sf{CaCl _{2} + Na_{2} SO_{4} → CaSO _{4} + 2NaCl}}[/tex]

From the equation, 1 mole of calcium chloride forms 1 mole of calcium sulphate.

R.F.M of CaCl2 = 40 + (35.5×2) = 111

R.F.M of CaSO4 = 40 + 32 + (16×4) = 136

R.F.M of Na2SO4 = (23×2) + 32 + (16×4) = 142

R.F.M of 2NaCl = 2[23 + 35.5] = 117

[tex]{ \sf{(r.f.m \: of \: rectants) = (r.f.m \: of \: products)}} \\{ \sf{ (mass \: of \: rectants) = (mass \: of \: products)}} \\ \\ { \sf{(111 + 142) = (136 + 117)}} \\ { \sf{300.23 = x}} \\ \\ { \sf{x = \frac{300.32}{(111 + 142)} \times (136 + 117) }} \\ \\ { \sf{x = \frac{300.32}{253} \times 253 }} \\ \\ { \sf{x = 300.32}}[/tex]

Answer:

The mass remains the same

Explanation:

The kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground assuming the friction is negligible. Option B is correct.

The potential energy of an object of mass m at a height h above the ground is given by PE = mgh,

where g is the acceleration due to gravity.

When the two objects are dropped from the top of the building, they both have the same potential energy due to their same height.

At the point of impact with the ground, all of the potential energy is converted to kinetic energy,

which is given by KE = 1/2*mv²,

where v is the velocity of the object just before hitting the ground.

Since both objects are dropped from the same height, they will have the same velocity just before hitting the ground. Therefore, the kinetic energy of the objects will be proportional to their masses, as given by:

KE_{4m} = 1/2 (4m) v² = 2mv²

KE_{2m} = 1/2 (2m) v² = mv²

Comparing both of them we know the kinetic energy of the heavier object (4m) is twice that of the lighter object (2m) when they hit the ground.

Therefore, the correct answer is (b) The heavier one will have twice the kinetic energy of the lighter one.

To know more about kinetic energy:

https://brainly.com/question/8101588

#SPJ11

i) The velocity of the particle at 17 sec is 17m/s.

ii) The total distance travelled is 190 m.

iii) The total displacement is -10m.

Distance is the length of any path connecting any two places. As measured along the shortest path between any two points, displacement is the direct distance between them.

The direction is ignored when calculating distance. The direction is accounted for in the displacement calculation.

Since it solely depends on magnitude and not direction, distance is a scalar number. Since displacement varies on both magnitude and direction, it is a vector quantity.

Distance provides specific directions that must be taken when moving from one location to another. Displacement only provides a partial description of the route because it pertains to the quickest way.

Velocity of particle = Slope of the object =Δ [tex]\frac{y}{x}[/tex]

Velocity = [tex]\frac{95-10}{20-15}[/tex] = 17m/s

To know more about Displacement, visit:

https://brainly.com/question/11934397

#SPJ1

At every location along the string, the amplitudes of two waves that interfere with one another are added. The two separate waves combine to form the final wave.

Two transverse waves are present in this instance, one traveling to the right and the other to the left. The waves will interact destructively when they meet since their motions are in opposition.

The resultant wave f(x) at any point x on the string may be calculated by summing the two amplitudes if we let f1(x) represent the amplitude of the wave going to the right and f2(x) represent the amplitude of the wave moving to the left:

f(x) = f1(x) + f2(x)

The amplitudes of the two waves will be equal in size and facing in opposite directions when they collide. As a result, the amplitude that results will be zero, and the string will then be at rest.

The resulting wave will alternate between constructive and destructive interference as the waves continue to travel past one another.

As a result, the string will develop a pattern of nodes (points of zero displacements) and antinodes (points of maximum displacement).

The combined frequency and wavelength of the various waves as well as the rate of wave propagation along the string will determine the final wave's frequency and wavelength.

learn more about transverse waves here

https://brainly.com/question/15531840

#SPJ1

a(t) = v'(t) = \frac{d}{dt} [5 + 5^{\frac{t}{3}}] = 0 + \frac{5}{3} \cdot 5^{\frac{t}{3}-1}

We are asked to find the acceleration of the particle at time t=4, so we substitute t=4 into the acceleration function:

a(4) = \frac{5}{3} \cdot 5^{\frac{4}{3}-1} = \frac{5}{3} \cdot 5^{\frac{1}{3}} \approx 1.265

Therefore, the answer is (C) 1.265.

The diffraction limit of a 4-meter telescope is two times smaller than that of a 2-meter telescope.

The diffraction limit of a telescope is the minimum distance between two objects so that they can still be viewed as separate from one another. It is determined by the instrument's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

In simpler terms, the diffraction limit refers to the smallest object size that a telescope can observe. This is known as angular resolution, which is determined by the telescope's aperture size and the wavelength of light being observed.

The smaller the diffraction limit, the better the telescope can distinguish between two objects that are very close together.

Therefore, a 4-meter telescope has a smaller diffraction limit than a 2-meter telescope. Hence, the answer is two times smaller.

Learn more about Diffraction limit here:

brainly.com/question/15081792

#SPJ11

Answer:

The best statement that explains the student's observation is: "The water is not a smooth surface after the rock is dropped in the pond." When the rock is dropped in the pond, it creates ripples and waves that disturb the smooth surface of the water. As a result, the reflection becomes less clear because the disturbed surface scatters the light and creates a distorted image. This is a common phenomenon observed when a disturbance is created on the surface of water, like when you throw a stone or object into it.

Functions of phosphorus: Bone formation, ATP production, DNA and RNA synthesis, cell membrane structure.

Order of nondairy foods by calcium content: 1) 1 cup calcium-fortified orange juice, 2) 1 cup Total Raisin Bran cereal, 3) 3 oz salmon with bones.

Highest source of phosphorus: Salmon with bones.

Organs that participate in vitamin D synthesis: Skin (when exposed to sunlight), liver, and kidneys.

What is bone formation?

Bone formation is the process by which bones grow and develop, including the deposition of mineralized bone tissue by osteoblasts and the resorption of bone tissue by osteoclasts, resulting in changes to the shape and structure of bones.

What is RNA?

RNA (Ribonucleic acid) is a molecule that plays a vital role in various biological processes. It is a type of nucleic acid that is composed of a chain of nucleotides, which are the building blocks of the molecule.

RNA is similar to DNA (deoxyribonucleic acid) in terms of its structure, but it has some key differences. RNA is usually single-stranded, while DNA is double-stranded. RNA uses the sugar ribose, while DNA uses deoxyribose. RNA also contains the nitrogenous base uracil, while DNA contains thymine.

To know more about RNA, visit:

https://brainly.com/question/20914096

#SPJ1

The force that counteracts the vertical pressure gradient force and prevents the atmosphere from accelerating out to space is the force of gravity.

The force that counteracts the vertical pressure gradient force and prevents the atmosphere from accelerating out to space is the force of gravity. The Earth's gravity acts on the atmosphere, pulling it towards the Earth's surface. This force is what keeps the atmosphere in place and prevents it from escaping into space.

In more detail, the vertical pressure gradient force arises due to differences in atmospheric pressure at different altitudes. As air moves from an area of high pressure to an area of low pressure, it experiences a net force that accelerates it vertically. However, gravity also acts on the air, pulling it towards the Earth's surface.

Learn more about gravity here

brainly.com/question/14874038

#SPJ4

The most beneficial range of repetitions Sally should perform in her three sets of leg extensions if she is attempting to develop muscular endurance in her legs is 12-20 repetitions. Thus, the correct option is D.

Muscular endurance is the ability of the muscles to perform continuously without being fatigued. It helps you maintain a specific body posture or position over an extended period or perform repeated movements over time. Muscular endurance is an essential component of fitness and an essential aspect of most sports.

The goal of training to develop muscular endurance is to condition the muscles to perform repeated contractions over an extended period. Muscular endurance is an essential aspect of any resistance training program. To develop muscular endurance, Sally should perform high repetitions of an exercise with lighter weight loads.

12-20 repetitions in each set are generally used to develop muscular endurance for most exercises, as this range can be accomplished with a light enough weight to avoid muscle fatigue while still providing the necessary stimulation to enhance endurance.

Therefore, the correct option is D.

Learn more about Muscular endurance here:

https://brainly.com/question/2763458

#SPJ11

The maximum displacement of m  is 199.14, and the time for maximum compression 1.56 seconds.

Given:

Weight, W = 38.6 lb

K(combined stiffness) = 6.4 lb/in

To find:

Maximum displacement of m and the time for maximum compression

Solution: The displacement and velocity of the weight at any time t can be written as below:

x = Acos (ωt + δ)z = Asin(ωt + δ)

Here, A = amplitude

ω = angular frequency = 2π

f = 2π/T

f = frequency = 1/TP = time period

z = vertical displacement of weight from its rest position

x = horizontal displacement of weight from its rest position

For the maximum displacement, the system will be in a state of equilibrium. i.e. ΣF = 0

Let's assume that the weight moves downwards by distance m, the force exerted by each spring will be kx, and the weight exerts a force W = mg on the springs downwards.

Here, m = 38.6 lbs, g = 32.2 ft/s2 and k = K/m = 6.4/38.6 = 0.1657 lb/in

ΣF = -kx - kx - kx - kx - kx - kx + mg = 0-6.4m = -38.6 * 32.2m = 199.14 in (Maximum Displacement of M)The maximum compression will occur when the weight is at the lowest point, i.e. z = -A

Therefore, the time for maximum compression, tmax can be calculated as below.

z = Asin(ωt + δ)At the point of maximum compression, t = tmax

z = -A = -199.14 in (as calculated above)

Therefore,-199.14 = Asin(ωtmax + δ)

Here, A = kx = 6.4×199.14/32.2 = 39.45 inω = 2π/T = 2πf = 2π/4.72 = 1.33 rad/s (where T = time period and f = frequency)

Therefore,-199.14 = 39.45sin(1.33tmax + δ)sin(1.33tmax + δ) = -5.05tmax = 1.56 s

Thus, the maximum displacement of m is 199.14 inches and the time for maximum compression is 1.56 seconds.

To know more about Displacement please visit :

https://brainly.com/question/14422259

#SPJ11

The initial separation d between the mass and the spring is 0.14m.

A m = 2.88kg mass starts from rest and slides a distance d down a frictionless θ = 34.7° incline. While sliding, it comes into contact with an unstressed spring of negligible mass. The mass slides an additional 0.185m as it is brought momentarily to rest by compression of the spring (k = 409N/m).

The initial separation d between the mass and the spring can be calculated using the equation:

d = (2*m*g*sin(θ)) / k

Substituting in the given values, we get:

d = (2*2.88kg*9.8m/s2*sin(34.7°)) / 409N/m

d = 0.14m

Therefore, the initial separation d between the mass and the spring is 0.14m.

To know more about initial separation, refer here:

https://brainly.com/question/12970890#

#SPJ11

The structure described by the scientist, which is an oily sphere with an inner fluid, is most likely a lipid vesicle.

Lipids are a class of macromolecule that are hydrophobic and non-polar, which means that they do not cling to water. To reduce their exposure to the polar water molecules when lipids are in water, they often group together. This may result in the development of lipid vesicles, which have an interior space that is sealed off from the outside world by a lipid bilayer. Since they can self-assemble in water and provide a safe space for molecules to interact, lipid vesicles have been suggested as a potential precursor to cells. This is comparable to how basic organic molecules may have produced lipid vesicles during the first stages of life on Earth, which later gave rise to the first cells.

Learn more about  scientist here:

https://brainly.com/question/17450573

#SPJ4

The kinetic energy k and the gravitational potential energy ug of a block sliding up an incline are both decreasing during the motion up the incline. Option C is correct .  

Energy is the capability to do work. There are two forms of energy: potential energy and kinetic energy.

Potential energy is stored energy as a result of an object's location or condition, whereas kinetic energy is the energy of motion.

The total energy of an object can be calculated as the sum of its potential and kinetic energies.

Since the block is moving up the incline, it is subjected to gravity. As a result, it must have both kinetic and potential energy.

Kinetic energy is associated with the motion of an object, while potential energy is associated with its position.

At the base of the slope, the block has a specific quantity of kinetic energy due to its motion.

It also has a specific amount of gravitational potential energy at the base of the slope since it is a certain distance above the Earth's surface.

As the block climbs the incline, it slows down due to the effect of gravity. This implies that its kinetic energy is decreasing.

At the same time, it is gaining height, which implies that its gravitational potential energy is decreasing as well. As a result, k and ug are both decreasing.

To know more about kinetic energy;https://brainly.com/question/810158

#SPJ11

Some potential drawbacks of switching from incandescent to compact fluorescent light bulbs are higher initial cost, sensitivity to temperature, and potential health hazards. Here is a more detailed explanation of these drawbacks:

Learn more about temperature: https://brainly.com/question/25677592

#SPJ11

Main-sequence B star has the greatest surface temperature. The correct answer is a.

The surface temperature of a star is closely related to its spectral classification, which is determined by analyzing the star's spectrum. The temperature of a star's surface affects its color, with hotter stars appearing bluer and cooler stars appearing redder. Main-sequence stars are stars that are fusing hydrogen into helium in their cores.

The temperature of a star's surface depends on its spectral class, which is determined by its temperature. B stars are hotter than A stars, K stars are cooler than A stars, and supergiant stars are generally cooler than main-sequence stars of the same spectral class. Therefore,  option a, a main-sequence B star has the highest surface temperature of the three options given.

To know more about stars, here

brainly.com/question/31116168

#SPJ4

The given statement "If two identical wires carrying a certain current in the same direction are placed parallel to each other, then they will experience a force of repulsion" is true. This can be explained through Lenz's law.

Two parallel wires which are carrying the same magnitude of current in the same direction experience a force of repulsion due to the electric currents in each of the wire which are creating a magnetic field in the same direction. This force of repulsion is known as the Lenz's Law.

When two identical wires are carrying a certain magnitude of electric current in the same direction and these are placed in parallel to each other, then they will experience a force of repulsion. This is due to the principle of the electromagnetic force and Lenz's law. When the two current-carrying wires are kept near each other, then they exert force on each other, and that force is called as the force of repulsion or the force of attraction depending on the direction of the current flowing through the wire. The direction of the force is given by the Fleming's left-hand rule, which is the most common way to determine the direction of the force in such cases.

Learn more about Electric current here:

https://brainly.com/question/2264542

#SPJ11

The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure.

The atmospheric pressure will be the same at every point. Therefore, they will all have the same pressure. Q, R, S, T, and U all have the same pressure.

The pressure at point X is greater than the pressure at points Y, Z, and W. Point W has the least pressure. Point Z has greater pressure than W but lesser than Y. Y has greater pressure than Z but less than X.

The pressure at point Z is equal to the atmospheric pressure. The atmospheric pressure acts on the open end of the tube that's why the pressure at point Z is equal to the atmospheric pressure. The pressure at point Z is in balance with the atmospheric pressure.The water level on the right-hand side will drop to a point below point Z. When water is removed from the left side, the pressure on the right side will be greater than the pressure on the left side.

So, the water will start to move towards the right side until the pressure in the left and right sides is the same again. When it is in balance, the water level on the right side will stay below point Z.

Learn more about preasure: brainly.com/question/24719118

#SPJ11

(a) The current in the 8.00 Ω resistor connected to a battery that has an internal resistance of 0.15 Ω and a terminal voltage of 9.00 V is 1.0 A.

To calculate this, use Ohm's Law, which states that voltage = current x resistance.

Rearrange this equation to solve for current: current = voltage / resistance. Plug in the values for voltage and resistance to get:

current = 9.00 V / 8.00 Ω + 0.15 Ω = 1.0 A.

(b) The EMF (electromotive force) of the battery is 9.00 V. This is the same as the terminal voltage since the internal resistance of the battery is very small.

Learn more about resistance at : https://brainly.com/question/24119414

#SPJ11

Answer:

The speed of the car will increase.

Explanation:

From idea of momentum, force is directly proportional to velocity

[tex]{ \bf{f \: \alpha \: v}} \\ { \rm{f = kv}}[/tex]

Initially, f = 25N and v = 3 m/s

[tex]{ \rm{25 = k \times 3}} \\ \\ { \rm{k = \frac{25}{3} }}[/tex]

Lastly, f = 35

[tex]{ \rm{f = \frac{25}{3}v }} \\ \\ { \rm{35 = \frac{25}{3} \times v}} \\ \\ { \rm{v = \frac{3 \times 35}{25} }} \\ \\ { \rm{v = 4.2} }[/tex]