explain why you can determine machine epsilon on a computer using IEEE double precision and the IEEE Rounding to Nearest Rule by calculating (7/3 - 4/3) - 1

Answer:

ahbtibrkn

Explanation:

uklbejixbi9538021#fbn

Answer:

4,400.

Explanation:

In order to determine what is 5 times 5 times 16 times 11 the following calcularion has to be done:

((11 x 16) x 5) x 5 = X

(176 x 5) x 5 = X

880 x 5 = X

4,400 = X

Therefore, 5 times 5 times 16 times 11 is equal to 4,400.

Answer:

use a cucullated

Explanation:

Answer:

what are the options?

reply in comment so i can help:)

Answer:

The capacitive reactance will be "100Ω" and RMS value of current is "2.2 A". A further explanation is provided below.

Explanation:

Given:

[tex]C =\frac{10^2}{\pi}\times 10^{-6} \ F[/tex]

[tex]V_{RMS}=220 \ V[/tex]

[tex]f = 50 \ Hz[/tex]

Now,

The capacitive reactance will be:

⇒ [tex]X_c=\frac{1}{\omega C} =\frac{1}{2 \pi f C}[/tex]

                   [tex]=\frac{1}{2\times \pi\times 50\times \frac{10^{-4}}{\pi} }[/tex]

                   [tex]=100 \ \Omega[/tex]

RMS value of current will be:

⇒ [tex]I_{RMS}=\frac{V_{RMS}}{X_c}[/tex]

             [tex]=\frac{220}{100}[/tex]

             [tex]=2.2 \ A[/tex]

So that,

⇒ [tex]V_m=220\times \sqrt{2}[/tex]

         [tex]=311 \ V[/tex]

⇒ [tex]I_m=2.2\times \sqrt{2}[/tex]

         [tex]=3.1 \ A[/tex]

hence,

The equation will be:

⇒ [tex]\nu=311 sin31 \ 4t[/tex]

and,

⇒ [tex]i=3.1 sin(314t+\frac{\pi}{2} )[/tex]

Answer:

1.maayos

2. Lugar

3. mali

Explanation:

im correct if I'm rwong :-)

Answer:

The summary of the given question would be summarized throughout the below segment.

Explanation:

Answer:

k(kkkkkkkkkkklkkkkkkkkkk(

Answer:

Router

Explanation:

A router can be defined as a network device that is designed typically for forwarding data packets between two or more networks based on a well-defined routing protocol.

Hence, a router is a node (or a device) that connects two different networks together and allows them to communicate.

Generally, routers are configured using a standard routing protocol with an IP address as the default gateway.

A routing protocol can be defined as a set of defined rules or algorithms used by routers to determine the communication paths unto which data should be exchanged between the source router and destination or host device.

Additionally, in order for packets to be sent to a remote destination, these three parameters must be configured on a host.

I. Default gateway

II. IP address

III. Subnet mask

After a router successfully determines the destination network, the router checks the routing table for the resulting destination network number. If a match is found, the interface associated with the network number receives the packets. Else, the default gateway configured is used. Also, If there is no default gateway, the packet is dropped.

Answer:

True

Explanation:

It is TRUE that Internal monitoring is accomplished by inventorying network devices and channels, IT infrastructure and applications, and information security infrastructure elements.

The above statement is true because Internal Monitoring is a term used in defining the process of creating and disseminating the current situation of the organization’s networks, information systems, and information security defenses.

The process of Internal Monitoring involved recording and informing the company's personnel from top to bottom on the issue relating to the company's security, specifically on issues about system parts that deal with the external network.

Answer:

Explanation:

The following code is written in Python. It asks the user to enter the current balance and the annual interest rate. It then calculates the monthly interest rate and uses that to detect the interest that will be earned for the next month. Finally, printing that to the screen. A test output can be seen in the attached picture below.

balance = int(input("Enter current Balance: "))

interest = int(input("Enter current annual interest %: "))

interest = (interest / 12) / 100

next_month_interest = balance * interest

print('$ ' + str(next_month_interest))

Answer:

++ provides versions of these algorithms in the namespace std::ranges. Algorithms are the vast topic that covers topics from searching, sorting to min/max heaps. These can be categorized as:

Explanation of C++ Algorithm

Explanation:

The statement "Unlike the collapse of Enron and WorldCom, TJX did not break any laws. It was simply not compliant with stated payment card processing guidelines" is definitely true.

The major cause of the TJX data breach was thought to be the hack that wasn't discovered until 2007, hackers had first gained access to the TJX network in 2005 through a WiFi connection at a retail store.

These situations were eventually able to install a sniffer program that could recognize and capture sensitive cardholder data as it was transmitted over the company's networks. They should be required to change the encryption methodology of the data they are using to save the personal identification information of their customers.

Therefore, the statement "Unlike the collapse of Enron and WorldCom, TJX did not break any laws. It was simply not compliant with stated payment card processing guidelines" is definitely true.

To learn more about, TJX data, refer to the link:

https://brainly.com/question/22516325

#SPJ2

Answer:

a) a plotting object like point, line, or other shape

Explanation:

A geom in the ggplot2 system is "a plotting object like point, line, or other shape."

A Geom is used in formulating different layouts, shapes, or forms of a ggplot2 such as bar charts, scatterplots, and line diagrams.

For example some different types of Geom can be represented as geom_bar(), geom_point(), geom_line() etc.

Answer:

There are 28 chocolate-covered peanuts in 1 ounce (oz). Jay bought a 62 oz. jar of chocolate-covered peanuts.

Problem:

audio

How many chocolate-covered peanuts were there in the jar that Jay bought?

Enter your answer in the box.

Explanation:

Answer:

Replace  /* Your solution goes here */ with:

System.out.println(randGen.nextInt(49) + 100);

System.out.println(randGen.nextInt(49) + 100);

Explanation:

Required

Statements to print two random numbers between 100 and 149 (both inclusive)

First, the random numbers must be generated. From the template given, the random object, randGen, has been created.

The syntax to then follow to generate between the interval is:

randGen.nextInt(high-low) + low;

Where:

high = 149 and low = 100

So, the statement becomes:

randGen.nextInt(149 - 100) + 100;

randGen.nextInt(49) + 100;

Lastly, print the statements:

System.out.println(randGen.nextInt(49) + 100);

System.out.println(randGen.nextInt(49) + 100);

Answer:

The program in Java is as follows:

import java.util.*;

public class Main{

public static void main(String[] args) {

 int n, num;

 Scanner input = new Scanner(System.in);

 System.out.print("Number of inputs: ");

 n = input.nextInt();

 LinkedList<Integer> myList = new LinkedList<Integer>();

 for(int i = 0; i<n;i++){

     System.out.print("Input Integer: ");

     num = input.nextInt();

     while (num > 0) {

     myList.push( num % 10 );

     num/=10;

     }

     while (!myList.isEmpty()) {

         System.out.print(myList.pop()+" ");

     }

     System.out.println();

     myList.clear();

 }

}

}

Explanation:

This declares the number of inputs (n) and each input (num) as integer

 int n, num;

 Scanner input = new Scanner(System.in);

Prompt for number of inputs

 System.out.print("Number of inputs: ");   n = input.nextInt();

The program uses linkedlist to store individual digits. This declares the linkedlist

 LinkedList<Integer> myList = new LinkedList<Integer>();

This iterates through n

 for(int i = 0; i<n;i++){

Prompt for input

     System.out.print("Input Integer: ");

This gets input for each iteration

     num = input.nextInt();

This while loop is repeated until the digits are completely split

     while (num > 0) {

This adds each digit to the linked list

     myList.push( num % 10 );

This gets the other digits

     num/=10;

     }

The inner while loop ends here

This iterates through the linked list

     while (!myList.isEmpty()) {

This pops out every element of thelist

         System.out.print(myList.pop()+" ");

     }

Print a new line

     System.out.println();

This clears the stack

     myList.clear();

 }

Answer:

Explanation:

Segmentation of students in ‘Technical Aspects of Big Data’ course based on activities they complete. The training data has no labels.

Answer:

split() wordCount = len(words) # start with zero characters ch = 0 for word in words: # add up characters ch += len(word) avg = ch / wordCount if avg == 1: print "In the sentence ", s , ", the average word length is", avg, "letter." else: print "In the sentence ", s , ", the average word length is", avg, "letters.

Answer:

the use of criminal thought by the name of education

Explanation:

TP1. लेखा अभिलेख भनेको ज्ञानको त्यस्तो शाखा हो, जुन व्यवसायको आर्थिक कारोबारहरूलाई नियमित, सु-व्यवस्थित र क्रमबद तरिकाले विभिन्न पुस्तिकाहरूमा अभिलेख गर्ने कार्यसँग सम्बन्धित छ।

Answer:

Following are the complete code to the given question:

#include <stdio.h>//header file

#include <string.h>//header file

#include <stdlib.h>//header file

int main()//main method  

{

  char userStr[100] = "";//defining a char array  

  char* newStr = NULL;//defining a char pointer  

  strcpy(userStr, "Hello friend!");//use strcpy method that holds char value  

  newStr = (char *)malloc(strlen(userStr));//defining a char variable that use malloc method

  strcpy(newStr, userStr);//use strcpy method that holds newStr and userStr value

  printf("%s\n", newStr);//print newStr value

  return 0;

}

Output:

Hello friend!

Explanation:

In this code inside the main method a char array "userStr" and a char type pointer variable "newStr" holds a value that is null, and inside this strcpy method is declared that holds value in the parameters.

In this, a malloc method is declared that uses the copy method to hold its value and print the newStr value.

Answer:

=AVERAGE(C5:C8)

Explanation:

The function calculates the average of the values in the cell range C5:C8 - C5, C6, C7, C8.

Answer:

Explanation:

The following code is written in Javascript as requested and creates a function that takes in the total credit card debt amount and the minimum monthly payment. Then it calculates the new balance at the end of the year after paying 12 monthly minimum payments. Finally, printing out the new balance to the console which can be seen in the attached picture below.

let brainly = (debt, minimum) => {

   debt = debt - (minimum * 12);

   console.log("Credit Card Balance after one year: $" + debt);

}

brainly(50000, 3400);

Answer:

See attachment

Explanation:

The solution and the explanation could not be submitted directly. So,I added both as attachments

To print a rectangle based on the given number of rows and columns, you will use nested loops using the following code:

num_rows = int(input())

num_cols = int(input())

for i in range(num_rows):

   for j in range(num_cols):

       print('*', end=' ')

   print()

By using nested loops, you will iterate through each row and column to print the desired shape. The outer loop controls the rows while the inner loop controls the columns. Within the inner loop, the desired symbol or character, such as "*", is printed with the print() statement.

The end=' ' parameter is used to separate each character by a space. The outer loop then moves to the next row and the process continues until the desired number of rows and columns are printed forming a rectangle.

Read more about nested loops

brainly.com/question/31921749

#SPJ6

Answer:

The CISO (Chief Information Security Officer) of an organization should understand the following components of an information security program:

1) Every organization needs a well-documented information security policy that will govern the activities of all persons involved with Information Technology.

2) The organization's assets must be classified and controlled with the best industry practices, procedures, and processes put in place to achieve the organization's IT objectives.

3) There should be proper security screening of all persons in the organization, all hardware infrastructure, and software programs for the organization and those brought in by staff.

4) Access to IT infrastructure must be controlled to ensure compliance with laid-down policies.

Explanation:

As the Chief Information Security Officer responsible for the information and data security of my organization, I will work to ensure that awareness is created of current and developing security threats at all times.  I will develop, procure, and install security architecture, including IT and network infrastructure with the best security features.  There will good management of persons' identity and controlled access to IT hardware.  Programs will be implemented to mitigate IT-related risks with due-diligence investigations, and smooth governance policies.

Answer:

Following are the code to the given question:

For code 1:

start = int(input())#defining a start variable that takes input from the user end

end = int(input())#defining a end variable that takes input from the user end

if start > end:#use if that checks start value greater than end value

   print("Second integer can't be less than the first.")#print message

else:#defining else block

   while start <= end:#defining a while loop that checks start value less than equal to end value

       print(start, end=' ')#print input value

       start += 5#incrementing the start value by 5

   print()#use print for space

For code 2:

while True:#defining a while loop that runs when its true

   data = input()#defining a data variable that inputs values

   if data == 'Done' or data == 'done' or data == 'd':#defining if block that checks data value

       break#use break keyword

   rev = ''#defining a string variable rev

   for ch in data:#defining a for loop that adds value in string variable  

       rev = ch + rev#adding value in rev variable

   print(rev)#print rev value

Explanation:

In the first code two-variable "first and end" is declared that takes input from the user end. After inputting the value if a block is used that checks start value greater than end value and use the print method that prints message.

In the else block a while loop is declared that checks start value less than equal to end value and inside the loop it prints input value and increments the start value by 5.

In the second code, a while loop runs when it's true and defines a data variable that inputs values. In the if block is used that checks data value and use break keyword.

In the next step, "rev" as a string variable is declared that uses the for loop that adds value in its variable and prints its values.

Answer:

a bit

Explanation:

<3

Answer:

1.)

def two(a, b) :

print(a+b)

print(a*b)

2.)

a = int(input('enter an integer values '))

b = int(input('Enter another integer value' ))

print(a+b)

print(a*b)

3.)

Take side of a square from user and print area and perimeter of it.

def square(a):

area = a**2

perimeter = 4*a

print(area, perimeter)

Explanation:

Code written in python :

The first function named two, takes to arguments a and b ;

The sum of integers a and b is taken and displayed using ; print(a+b)

The product of integers a and b is taken and displayed using ; print(a*b)

2.)

User can enter an input and converted to an integer value using the command ;

int(input()) ; the sum and product of these values are displayed using :

print(a*b) and print(a+b)

The Area and perimeter of a square requires the side length, which is taken as the argument a in the square function defined.

Area of square = a² = a**2

Perimeter = 4 * a

Answer:

what are the choices

:"

Explanation: