Extra CreditA particle is directed along the axis of the instrument in the gure. Aparallel plate capacitor sets up an electric eld E, which is orientedperpendicular to a uniform magnetic eld B. If the plates are separated byd= 2:0 mm and the value of the magnetic eld isB= 0:60T. Calculatethe potential di erence, between the capacitor plates, required to allow aparticle

Answer:

the required or need power is 115960.57 Watts  

Explanation:

First of all, we take down the data we can find from the question, to make it easier when substituting values into formulas.

mass of swordfish m = 650 kg

Cross - sectional Area A = 0.92 m²

drag coefficient C[tex]_D[/tex] = 0.0091

speed v = 30 m/s

density p = 1026 kg/m³

Now, we determine our Drag force F[tex]_D[/tex]

Drag force F[tex]_D[/tex]  = [tex]\frac{1}{2}[/tex] × C[tex]_D[/tex] × A × p × v²

Next, we substitute the values we have taken down, into the formula.

Drag force F[tex]_D[/tex]  = [tex]\frac{1}{2}[/tex] × 0.0091 × 0.92 × 1026 × (30)²

Drag force F[tex]_D[/tex]  = 4.294836 × 900

Drag force F[tex]_D[/tex]  = 3865.3524

Now, we determine the power needed P[tex]_w[/tex]

P[tex]_w[/tex] = F[tex]_D[/tex] × v

we substitute  

P[tex]_w[/tex] = 3865.3524 × 30

P[tex]_w[/tex] = 115960.57 Watts  

Therefore, the required or need power is 115960.57 Watts  

Answer:

[tex]10.54\ \text{rad/s}[/tex]

Explanation:

[tex]\omega_i[/tex] = Initial angular velocity = 500 rpm = [tex]500\times \dfrac{2\pi}{60}\ \text{rad/s}[/tex]

[tex]\omega_f[/tex] = Final angular velocity

t = Time = 34 s

[tex]\theta[/tex] = Angular displacement = 170 revs = [tex]170\times 2\pi\ \text{rad}[/tex]

[tex]\alpha[/tex] = Angulr acceleration

From the kinematic equations of angular motion we have

[tex]\theta=\omega_it+\dfrac{1}{2}\alpha t^2\\\Rightarrow \alpha=\dfrac{\theta-\omega_it}{\dfrac{1}{2}t^2}\\\Rightarrow \alpha=\dfrac{170\times 2\pi-500\times \dfrac{2\pi}{60}\times 34}{\dfrac{1}{2}\times 34^2}\\\Rightarrow \alpha=-1.23\ \text{rad/s}^2[/tex]

[tex]\omega_f=\omega_i+\alpha t\\\Rightarrow \omega_f=500\times \dfrac{2\pi}{60}+(-1.23)\times 34\\\Rightarrow \omega_f=10.54\ \text{rad/s}[/tex]

The rate at which the wheel is spinning when the power comes back on is [tex]10.54\ \text{rad/s}[/tex].

Answer:

Explanation:

The classification will be made into 3 categories, which are

Ones that shortens wavelengths

Ones that lengthens wavelengths

Ones that has no effect on wavelengths

Shortens wavelengths -> Increase frequency

Lengthens wavelengths -> Decrease frequency

No effect -> Increase amplitude, decrease amplitude, increase damping, decrease damping.

Answer:

D th

Explanation:

D B. The force applied to the ball is a balanced force.

A new planet that supports life would have all the following characteristics except an orbiting moon. Hence, option B is correct.

An enormous, spherical celestial object known as a planet is neither a star nor its remains. The nebular hypothesis, which states how an interstellar cloud falls out of a nebula to produce a young protostar encircled by a protoplanetary disk, is now the best explanation for planet formation.

By gradually accumulating material under the influence of gravity, or accretion, planets develop in this disk.

The rocky planets Mercury, Venus, Earth, and Mars, as well as the giant planets Jupiter, Saturn, Uranus, and Neptune, make up the Solar System's minimum number of eight planets. These planets all revolve around axes that are inclined relative to their respective polar axes.

To know more about Planet:

https://brainly.com/question/14581221

#SPJ2

Answer:

the decay of uranium ending in lead,  of potassium (40K) that becomes argon,  the decay of rubidium

Explanation:

For the radioactive dating process, a material is needed that has a known average life time and that we can know the amount of material at a given moment,

In the case of carbon 14 (14C), living beings stop capturing it from the air and plants when they die, so knowing the amount they currently have, it is possible to calculate the time in which they stopped absorbing, but the life time average is 5730 years, the maximum time that can be used is up to about 10 average visa times

To analyze extra samples have high half-life times

* the decay of uranium ending in lead

* the decay of potassium (40K) that becomes argon T1 / 2 = 1,251 10⁹ years

* the decay of rubidium (87Ru) which becomes strontium T1 / 2 = 4.92 10¹⁰ years

Answer:

Surface tension is,  the surface where the water meets the air, water molecules cling even more tightly to each other.

Answer:

[tex]523269.9\ \text{N/m}[/tex]

Explanation:

q = Charge

r = Distance

[tex]q_1=25\ \text{C}[/tex]

[tex]r_1=3000\ \text{m}[/tex]

[tex]q_2=40\ \text{C}[/tex]

[tex]r_2=850\ \text{m}[/tex]

The electric field is given by

[tex]E=E_1+E_1\\\Rightarrow E=k(\dfrac{q_1}{r_1^2}+\dfrac{q_2}{r_2^2})\\\Rightarrow E=9\times 10^9\times (\dfrac{25}{3000^2}+\dfrac{40}{850^2})\\\Rightarrow E=523269.9\ \text{N/m}[/tex]

The electric field at the aircraft is [tex]523269.9\ \text{N/m}[/tex]

Ans[tex]^{}[/tex]wer and expl[tex]^{}[/tex]anation is in a fi[tex]^{}[/tex]le. Li[tex]^{}[/tex]nk below! Go[tex]^{}[/tex]od luck!  

bit.[tex]^{}[/tex]ly/3a8Nt8n

Answer:

the answer is false.

Explanation:

i took the test and it is false trust me!!!!!!!!!

Answer:

50j

Explanation:

Watts are units used to measure power. power can be defined as rate of energy transfer

500 watts means - 500 J of energy per second

in 1 second - 500 J of work is done

therefore within 10 seconds - 500 J/s x 10 s = 5000 J

work of 5000 J is carried out in 10 seconds

Answer:

Watts are units used to measure power. power can be defined as rate of energy transfer

500 watts means - 500 J of energy per second

in 1 second - 500 J of work is done

therefore within 10 seconds - 500 J/s x 10 s = 5000 J

work of 5000 J is carried out in 10 seconds

Explanation:

Answer:

24 J

Explanation:

[tex]K = \frac{1}{2} mv^{2} = \frac{1}{2} (3kg)(4m/s)^{2} = 24 J[/tex]

Answer:

  K_{total} = 8.91 J

Explanation:

In this exercise you are asked to find the kinetic energy of the can of coca-cola

         K_total = K_ {Translation} + K_ {rotation}

the translational kinetic energy is

         K_ {translation} = ½ m v²

the kinetic energy of rotation is

         K_ {rotation} = ½ I w²

The moment of inertia of a cylinder is

           I = ½ m r²

we substitute

          K_ {total} = ½ m v² + ½ (½ m r²) w²

angular and linear velocity are related

          v = w r

we substitute

          K_ {total} = ½ m v² + ¼ m r² v² / r²

          K_ {total} = m v² (½ + ¼)

          K_ {total} = ¾ m v²

let's calculate

          K_ {total} = ¾ 0.33 6.00²

           K_{total} = 8.91 J

Answer:

trueeeeeeee..........mmmm...........

Answer:

Nuclear fusion

Explanation:

Answer:

Thrust developed = 212.3373 kN

Explanation:

Assuming the ship is stationary

Determine the Thrust developed

power supplied to the propeller ( Punit ) = 1900 KW

Duct distance ( diameter ; D  ) = 2.6 m

first step : calculate the area of the duct

A = π/4 * D^2

   =  π/4 * ( 2.6)^2  = 5.3092 m^2

next : calculate the velocity of propeller

Punit = (A*v*β ) / 2  * V^2     ( assuming β = 999 kg/m^3 ) also given V1 = 0

∴V^3 = Punit * 2 / A*β

         = ( 1900 * 10^3 * 2 ) / ( 5.3092 * 999 )

hence V2 = 8.9480 m/s

Finally determine the thrust developed

F = Punit / V2

  = (1900 * 10^3) / ( 8.9480)

  = 212.3373 kN

Answer:

Truck [tex]\dfrac{g}{10}[/tex]

Road [tex]-\dfrac{g}{10}[/tex]

Explanation:

[tex]a_1[/tex] = Acceleration of truck = [tex]-\dfrac{g}{2}[/tex]

[tex]\mu[/tex] = Coefficient of friction = [tex]\dfrac{2}{5}[/tex]

Frictional force is given by

[tex]f=-\mu mg\\\Rightarrow f=-\dfrac{2}{5}mg\\\Rightarrow ma_2=-\dfrac{2}{5}mg\\\Rightarrow a_2=-\dfrac{2}{5}g[/tex]

Net acceleration is given by

[tex]a=a_2-a_1\\\Rightarrow a=-\dfrac{2}{5}g+\dfrac{g}{2}\\\Rightarrow a=\dfrac{g}{10}[/tex]

The acceleration of the box relative to the truck is [tex]\dfrac{g}{10}[/tex] and [tex]-\dfrac{g}{10}[/tex] relative to the road.

Answer: hetero i think i dont know

Explanation:

Answer:

When two substances that cannot dissolve each other are mixed, a mixture is formed.

i hope this helps a little bit.

Answer:

a) T = 1.69 s, b)  k = 0.825 N / m, c)  v = 1.46 feet/s, d) a = 5.41 ft / s²,

e)   v = - 1,319 ft / s,    a = - 2.70 ft / s², f) K = 4.8 10⁻³ J, U = 1.49 10⁻³ J

Explanation:

In a mass-spring system with simple harmonic motion, the angular velocity is

         w = [tex]\sqrt{\frac{k}{m} }[/tex]

a) find the period

angular velocity, frequency, and period are related

         w = 2π f = 2π / T

          f = 1 / T

          T = 1 / f

           T = 1 / 0.59

           T = 1.69 s

b) the spring constant

         w = 2π f

         w = 2π 0.59

         w = 3.70 rad / s

         w² = k / m

          k = w² m

          k = 3.70² 0.060

          k = 0.825 N / m

c) the maximum speed

simple harmonic movement is described by the expression

          x = A cos (wt + Ф)

speed is defined by

         v =[tex]\frac{dx}{dt}[/tex]

          v = -A w sin (wt + fi)

the speed is maximum when the cosine is ± 1

          v = A w

          v = 0.394 3.70

          v = 1.46 feet/s

d) maximum acceleration

            a = [tex]\frac{dv}{dt}[/tex]

            a = - A w² cos wt + fi

the acceleration is maximum when the cosine is ±1

            a = A w²

            a = 0.394 3.70²

            a = 5.41 ft / s²

e) velocity and acceleration for x = 6 cm

let's reduce the cm to feet

            x = 6 cm (1 foot / 30.48 cm) = 0.1969 foot

Before doing this part we must find the phase angle (Ф), the most common way to start the movement is to move the spring a small distance and release it, so its initial speed is zero for t = 0 s

let's use the expression for the velocity

           v = -A w sin (0 + Фi)

           0 = - A w sin Ф

so sin Ф = 0 which implies that Фi = 0

the equation of motion is

            x = A cos wt

            x = 0.394 cos 3.70t

we substitute

           0.1969 = 0.394 cos 370t

           3.70 t = cos⁻¹ (0.1969 / 0.394)

let's not forget that the angle is in radians

           3.70, t = 1.047

           t = 1.047 / 3.70

           t = 0.2826 s

we substitute this time in the equation for velocity and acceleration

           v = - Aw sin wt

           v = - 0.394 3.70 sin 3.70 0.2826

           v = - 1,319 ft / s

           a = - A w² cos wt

           a = - 0.394 3.70² cos 3.70 0.2826

           a = - 2.70 ft / s²

f) the kinetic and potential energy at this point

           K = ½ m v²

let's slow down to the SI system

           v = 1.319 ft / s (1 m / 3.28 ft) = 0.402 m / s

           K = ½ 0.060 0.402²

           K = 4.8 10⁻³ J

           U = ½ k x²

           U = ½ 0.825 0.06²

           U = 1.49 10⁻³ J

Answer:

You get Day and Night

It takes 24 hour

Answer:

Explanation:

The Earth's orbit makes a circle around the sun. At the same time the Earth orbits around the sun, it also spins.Since the Earth orbits the sun and rotates on its axis at the same time we experience seasons, day and night, and changing shadows throughout the day.It only takes 23 hours, 56 minutes and 4.0916 seconds for the Earth to turn once on its axis.

Question: Two people stand facing each other at a roller-skating rink then push off each other. If the girl skater has a mass of 30 kg and moves backward at 5 m/s, what is the velocity of the boy skater if his mass is 50 kg?

Answer:

3 m/s

Explanation:

Applying,

The Law of conservation of momentum

Momentum of the girl skater = momentum of the boy skater

MV = mv...................... Equation 1

Where M = mass of the girl skater, V = velocity of the girl skater, m = mass of the boy skater, v = velocity of the boy skater

From the question, we were asked to calculate v

v = MV/m.................. Equation 1

Given: M = 30 kg, V = 5 m/s, m = 50 kg

Substitute these values into equation 1

v = (30×5)/50

v = 3 m/s

Hence the velocity of the the boy skater is 3m/s

Answer: I think B.)

Explanation:

Answer:

i dont know but i should know try g o o g l e

Explanation:

Answer:

b

Explanation:

f1=-f2 that could be thank u

Answer:

300

Explanation:

the momentum is 300

p=mv

p=5×60

5×60 =300

Answer:

T = 0.71 seconds

Explanation:

Given data:

mass m = 1Kg, spring constant K = 78 N/m, time period of oscillation T = 0.71 seconds.

We have to calculate time period when this same spring-mass system oscillates vertically.

As we know

[tex]T = 2\pi \sqrt{\frac{m}{K} }[/tex]

This relation of time period is true under every orientation of the spring-mass system, whether horizontal, vertical, angled or inclined. Therefore, time period of the same spring-mass system oscillating  vertically too remains the same.

Therefore, T = 0.71 seconds

Answer:

Earth has a much greater mass than objects on its surface

Answer:

Ability of the Keck telescope to capture more distant object despite been atop Mauna kea that Hale Telescope may not capture even if it is atop Palomar mountain in California

Explanation:

If increasing the Diameter of a Telescope beyond a given value will increase the ability of the telescope to capture more light and also capture astronomical objects located in a very distant position without improving resolution.

Hence the superiority of Keck telescope atop Mauna Kea over Hale Telescope atop Palomar mountain in California is the ability of the Keck telescope to capture more distant object despite been atop Mauna kea that Hale Telescope may not capture even if it is atop Palomar mountain in California

Accelerating objects are changing their velocity. Velocity is often thought of as an object's speed with a direction. Thus, objects which are accelerating are either changing their speed or changing their direction. They are either speeding up, slowing down or changing directions. Changing the velocity in any one of these three ways would be an example of an accelerated motion.

Answer:

Half life is 3.23 hours

Explanation:

Given

Decay rate at starting = 1160 decays per minute

Decay rate after 4 hours = 170 decays per minute

As we know know

[tex]N = N_0 *e ^{\Lambda *T}[/tex]

Substituting the given values, we get -

[tex]170 = 1160 *e ^{-4*\Lambda}\\0.1465 = e ^{-4*\Lambda}\\-0.834 = -4 * \Lambda\\\Lambda = 0.834/4\\\Lambda = 0.2085[/tex]

Also

[tex]t_{1/2} = \frac{ln2}{\Lambda}[/tex]

Substituting the given values we get -

[tex]t_{1/2} = =0.693/0.2085\\= 3.23[/tex]hours