Fe có tác dụng với Hcl
Fe + 2hcl -> fecl2 +h2
Answer:
có
Explanatio:
Bacteria and archaea carry out the process of nitrogen fixation, which reduces atmospheric nitrogen, N2, to the biologically useful form NH3, also called ammonia. The nitrogenase complex consists of two proteins, reductase and nitrogenase, which catalyze the reactions of nitrogen fixation. Match each structural feature or function with the corresponding component of the nitrogenase complex.
a. also called the molybdenum—iron protein, or the MoFe protein
b. transfers electrons from a donor, such as frrredoxin, to the other component.
c. Homodimer
d. Heterotetramer
1. Reductase
2. Nitrogenase
Answer:
a. Nitrogenase
b. Reductase
c. Reductase
d. Nitrogenase
Explanation:
Reductase is a enzyme which promotes chemical reduction for a substance. It is also known as iron protein as iron is main component in reductase. Nitrogenase are molybdenum because they sulfur as co factor
Using a mole ratio, find the moles of Cu. You have been given the following
balanced chemical equation, and you have 1.5 moles of Al to start.*
2AI
+
3Cu(SO4)
3Cu
+
Al2(SO4)3n
n 1.5 moles
Answer: 2,25 mol
Explanation: 2Al + 3CuSO4 → Al2(SO4)3 + 3Cu
1,5 mol (1,5*3)/2 mol = 2,25 mol
Draw the product formed when diene and dienophile react in a Diels–Alder reaction.
Answer:
Explanation:
Diels-Alder reactions are cyclo-additional reactions between conjugated dienes and a dienophile (a substituted alkene compound for example acrylic acid) to produce a ring structure of cyclohexene compounds.
From the image attached below, we will see the reaction between 2,3-dimethylbuta-1,3-diene which is a conjugated diene with acrylic acid to produce a Diel-Alder adduct as the product. From the reaction, a single new π-bond and two σ-bonds are produced.
A solution is formed by dissolving 83.2 grams of copper II chloride (CuCl2) in 2.5 liters of water. The molar mass of CuCl2 is 134.45 g/mol.
What is the molarity of the solution?
Explanation:
the answer is in the above image
mẫu khi thêm NH4NO3 vào đem nung để nguội lại thêm NH4NO3 có tác dụng gì?
Answer:
Adding ammonium nitrate to water turns the mixture cold and is a good example of an endothermic chemical reaction!
0.159 mol 2.25 M = A L of HCI
Answer:
hmmm?what?
Explanation:
ayusin mo flece:>
The products in a decomposition reaction _____. are compounds can be elements or compounds are elements include an element and a compound
Answer:
compounds are elements include an element and a compound
Explanation:
elements in the decomposition reaction is the substance that cannot be separated into simpler substances. Compounds, technically act as a reactant in the decomposition reaction, but since the reaction breakdown one substance into two or more, sometimes it exists in the product
Write the bond line formula for the compound (CH3)2CHCH2C(CH3)3.
Formula is (CH3)2CHCH2C(CH3)3 and the name is 2,2,4-trimethylpentane
separete the ALKALI from the following bases :
NH4OH(ammonium nitrate)
CuO(copper oxide)
Zn(OH)2 (zinc hydroxide)
MgO(magnesium oxide)
Na2O(sodium oxide)
NaOH(sodium hydroxide)
CoO(cobalt oxide)
Mg(OH)2(magnesium hydroxide)
LIOH(lithium hydroxide)
help me with this i will surely mark u as Brainliest
plss help!!!
Answer:
Ammonium hydroxide, NH₄OH
Magnesium hydroxide, Mg(OH)₂
Sodium hydroxide, NaOH
Lithium hydroxide, LiOH
Explanation:
A base is a substance which neutralizes acids to produce salt and water. Bases are hydroxide or oxides of metals. Bases may be soluble or insoluble in water. Bases generally have a bitter taste and turn red litmus paper or indicator red.
Alkalis are bases which are soluble in water. They form the hydroxide of the alkali metals or alkaline earth metals in solution and they ionize to produce hydroxide ions. They are slippery to touch and turn red litmus blue being bases.
Therefore, all alkalis are bases but not all bases are alkalis. Insoluble bases are not alkalis.
From the given chemical compounds the alkalis present in the list are:
Ammonium hydroxide, NH₄OH; since it is soluble in water and produces hydroxide ions
Magnesium hydroxide, Mg(OH)₂; since it is slightly soluble in water and produces hydroxide ions
Sodium hydroxide, NaOH; since it is soluble in water and produces hydroxide ions
Lithium hydroxide, LiOH; since it is soluble in water and produces hydroxide ions
CuO(copper oxide) is a base but not an alkali as it does not produce hydroxide ions.
Zn(OH)2 (zinc hydroxide) is amphoteric and is insoluble
MgO(magnesium oxide) is a base but not an alkali as it does not produce hydroxide ions.
Na2O(sodium oxide) is a base but not an alkali as it does not produce hydroxide ions.
CoO(cobalt oxide) is a base but not an alkali as it does not produce hydroxide ions.
The oxygen atom of a ketone (such as cyclohexanone) contains 2 lone pairs of electrons. These pairs of electrons most likely reside in what type of orbital
Answer: The given pairs of electrons most likely reside in [tex]sp^{2}[/tex] type of orbital.
Explanation:
As it is given that two lone pair of electrons are present on the oxygen atom of ketone (such as cyclohexanone).
Also, there will be one bond pair between carbon and oxygen atom.
Hence, total electrons present in the domain are as follows.
2 lone pairs + 1 bon pair of electron = 3 electron domains
This means that there will be [tex]sp^{2}[/tex] type of orbital present.
Thus, we can conclude that given pairs of electrons most likely reside in [tex]sp^{2}[/tex] type of orbital.
An OH group attached to a hydrocarbon is called a _________ group whereas ______________ is a polyatomic ion with a charge of _______.
An OH group attached to a hydrocarbon is called an alkyl group whereas hydroxide is a polyatomic ion with a charge of -1.
What is OH group?OH group is also called hydroxyl group. Alcohol is a type of organic compound that is characterized by one or more hydroxyl (―OH) groups attached to a carbon atom of an hydrocarbon chain so we can conclude that an OH group attached to a hydrocarbon is called an alkyl group whereas hydroxide is a polyatomic ion with a charge of -1.
Learn more about hydrocarbon here: https://brainly.com/question/3551546
Type the correct answer in the box.
Calculate the density of the substance.
A sample of a substance has a mass of 27.3 grams and a volume of 7.0 centimeters3. The density of this substance is ____
grams/centimeter3.
Answer:
3.9g/cm3
Explanation:
Density ( d)=?
Mass(m)=27.3g
Volume (v)=7.0cm3
D=m÷v
D=27.3g÷7.0cm3
D=3.9g/cm3
B. It shifts the equilibrium toward the right, favoring product.
11. What is meant by the term heat of reaction?
A. the difference in temperature between products and reactants
B. the difference in bond energies between products and reactants
C. the difference in heat energies between products and reactants
What other name is a synonym for this term?
A. entropy change
B. potential change
C. enthalpy change
Answer:
11) the difference in heat energies between products and reactants
12) enthalpy change
Explanation:
The heat of reaction is defined as that energy released or absorbed as chemical substances participate in a chemical reaction. It is a term used to denote the change in energy as reactants change into products.
Another name of heat of reaction is enthalpy of reaction. It is a state function since it depends on the initial and final states of the system.
How is the atomic mass of an element calculated?
Answer:
Mass number (A) is the number of nucleons (proton and neutron) present in a atom.
Explanation:
electrons don't cout since they are thousandth's of the mass of protons or neutrons
How to find the number of protons
Answer:
No of protons is equal to the atomic number.
Answer:
atomic number
Explanation:
Which one is the dependent variable in distance, force, or work
Answer:
Work
Explanation:
Formula for work is given by;
Work = force × distance.
It is clear from this formula that Work depends on force and distance.
This means that force and distance are independent of the workdone and so they are classified as independent variables while work will be the dependent variable.
Astatine is a halogen with several isotopes that all have short half-lives. Which of the following combinations of mass number and neutrons are possible as isotopes of astatine? Choose one or more:
i) A = 211, n = 127
ii) A = 210, n = 125
iii) A = 220, n = 134
iv) A = 207, n = 122
v) A = 209, n = 124
Answer:
Astatine is a halogen with several isotopes that all have short half-lives.
Which of the following combinations of mass number and neutrons are possible as isotopes of astatine? Choose one or more:
i) A = 211, n = 127
ii) A = 210, n = 125
iii) A = 220, n = 134
iv) A = 207, n = 122
v) A = 209, n = 124
Explanation:
The mass number is the sum of the number of protons and the number of neutrons in an atom.[tex]A=no.of protons+no.of neutrons\\=>no.of neutrons=A-no.of protons\\[/tex]
Atomic number of At(astatine ) =85
That means it has --- 85protons.
Its mass number A=210
Hence, the number of neutrons in At are:
[tex]n=A-Z\\=>n=210-85\\=>n=125[/tex]
Second option:
ii) A=210 , n=125 is the answer.
Draw the predominant product(s) of the following reactions including stereochemistry when it is appropriate. CH3CH2 C C CH3 H2O/H2SO4/HgSO4
Answer:
Draw the predominant product(s) of the following reactions including stereochemistry when it is appropriate.
CH3CH2 C C CH3 H2O/H2SO4/HgSO4
Explanation:
The given compound is: pent-2-yne.
When it reacts with water, in presence of sulphuric acid and mercuric sulphate then a ketone is formed as shown below:
This reaction is an example of nucleophilic attack of water on carbon carbon triple bond.
The general mechanism of the reaction is hsown below:
Pent-2-yne reacts with water and form 3-pentanone.
The reaction is shown below:
Describe what happens between the valence electrons in an Ionic Bond.
How is that different from a covalent bond?
Answer:
In an ionic bond, the elctrons are transferred. For example, NaCl has an ionic bond because Na loses an electron and the Cl atom gains the electron. However in a covalent bond, the electrons are shared equally. Covalent bonds usually occur between two nonmetals.
Explanation:
examples of isotones
Answer:
Examples of isotones include carbon-12, nitrogen-13 and oxygen-14. These atoms all have six neutrons and six, seven and eight protons respectively. A mnemonic that can be used to differentiate isotones from isotopes and isobars is as follows: same Z (number of protons) = isotopes.
Which of the following reasons explains why if salt water is heated, the water turns into steam while the salt remains?
Water and salt have an equal boiling point.
Water has a lower boiling point than salt.
Salt has a lower boiling point than water.
Salt and water have an equal melting point.
If the salt water is heated, the water turns into steam and the salt remains because the water has a lower boiling point than the salt.
The following points can be considered:
The boiling point is defined as the temperature at which the substance turns into the gaseous state from the liquid state.The boiling point of water is [tex]100^{o} C[/tex].The salt is a substance comprising two entities separated by the opposite charges with ionic interactions.The boiling point of a salt is higher than the boiling point of the water.The process involved when salt water is heated:
The salt water mixture when heated, the water turns into steam at [tex]100^{o} C[/tex]But the salt remains until it reaches its boiling temperature. If the salt is soluble in water and is then heated, then there occurs an elevation in the boiling point of the substance, due to the presence of the salt.Therefore, the answer is water has a lower boiling point than salt.
Learn more about salt:
https://brainly.com/questions/4076105
what is the scientific name of lion
Answer:
the scientific name of lion is
Panthera leo
(A) Calculate the wavelength (in nm) of light with energy 1.89 × 10–20 J per photon, (b) For light of wavelength 410 nm, calculate the number of photons per joule, (c) Determine the binding energy (in eV) of a metal if the kinetic energy possessed by an ejected electron [using one of the photons in part (b)] is 2.93 × 10–19 J.
Answer:
For A: The wavelength of the light is [tex]1.052\times 10^4nm[/tex]
For B: The number of photons per joule is [tex]2.063\times 10^{18}[/tex]
For C: The binding energy of a metal is 1.197 eV.
Explanation:
The equation used to calculate the energy of a photon follows:
[tex]E=\frac{hc}{\lambda}[/tex] ......(1)
where,
E = energy of a photon
h = Planck's constant = [tex]6.626\times 10^{-34}J.s[/tex]
c = speed of light = [tex]3\times 10^{8}m/s[/tex]
[tex]\lambda[/tex] = wavelength
For A:Given values:
E = [tex]1.89\times 10^{-20}J[/tex]
Putting values in equation 1, we get:
[tex]\lambda=\frac{(6.626\times 10^{-34}J.s)\times (3\times 10^8m/s)}{1.89\times 10^{-20}J}\\\\\lambda=1.052\times 10^{-5}m[/tex]
Converting the wavelength into nanometers, the conversion factor used is:
[tex]1m=10^9nm[/tex]
So, [tex]\lambda=1.052\times 10^{-5}m\times \frac{10^9nm}{1m}=1.052\times 10^4nm[/tex]
Hence, the wavelength of the light is [tex]1.052\times 10^4nm[/tex]
For B:Given values:
[tex]\lambda=410nm=410\times 10^{-9}m[/tex]
Putting values in equation 1, we get:
[tex]E=\frac{(6.626\times 10^{-34}J.s)\times (3\times 10^8m/s)}{410\times 10^{-9}m}\\\\E=4.848\times 10^{-19}J[/tex]
To calculate the number of photons, we use the equation:
[tex]\text{Number of photons}=\frac{\text{Total energy}}{\text{Energy of a photon}}[/tex]
Total energy = 1 J
Energy of a photon = [tex]4.848\times 10^{-19}J[/tex]
Putting values in the above equation:
[tex]\text{Number of photons}=\frac{1J}{4.848\times 10^{-19}J}\\\\\text{Number of photons}=2.063\times 10^{18}[/tex]
Hence, the number of photons per joule is [tex]2.063\times 10^{18}[/tex]
For C:To calculate the binding energy of a metal, we use the equation:
[tex]E=K+B[/tex] .....(2)
E = Total energy
K = Kinetic energy of a photon
B = Binding energy of metal
Converting the energy from joules to eV, the conversion factor used is:
[tex]1eV=1.602\times 10^{-19}J[/tex]
Using the above conversion factor:
[tex]K=2.93\times 10^{-19}J=1.829eV\\\\E=4.848\times 10^{-19}J=3.026eV[/tex]
Putting values in equation 2:
[tex]B=(3.026-1.829)eV=1.197eV[/tex]
Hence, the binding energy of a metal is 1.197 eV.
How many grams of solid sodium cyanide should be added to 1.00 L of a 0.119 M hydrocyanic acid solution to prepare a buffer with a pH of 8.809
Answer:
1.62 g
Explanation:
Given that:
Concentration of HCN = 0.119 M
Assuming the ka 4.00 × 10⁻¹⁰
The pKa of HCN (hydrocyanic acid) = -log (Ka)
= - log ( 4.00 × 10⁻¹⁰)
= 9.398
pH of buffer = 8.809
Using Henderson Hasselbach equation:
[tex]pH = pKa + log \dfrac{[conjugate\ base ]}{acid}[/tex]
[tex]pH = pKa + log \dfrac{[CN^-]}{[HCN]}[/tex]
[tex]8.809 = 9.398 +log \dfrac{[CN^-]}{[HCN]}[/tex]
[tex]log \dfrac{[CN^-]}{[HCN]}= 8.809 - 9.398[/tex]
[tex]log \dfrac{[CN^-]}{[HCN]}= -0.589[/tex]
[tex]\dfrac{[CN^-]}{[HCN]}= 0.2576[/tex]
[CN^-] = 0.2576[HCN]
[CN^-] = 0.2756 (0.119) L
[CN^-] = 0.033 M
∴
The amount of NaCN (sodium cyanide) is calculated as follows:
[tex]= 1.00 L \times \dfrac{0.033 \ mol \ NacN }{1 \ L } \times \dfrac{49.01 \ g}{1 \ mol \ of \ NacN}[/tex]
= 1.62 g
What is nitrogen???? explain!!!
Answer:
It is a colourless, odourless, tasteless gas that is the most plentiful element in Earth's atmosphere and is a constituent of all living matter.
Explanation:
Have a nice day :D
Answer:
Nitrogen is a gas
Explanation:
Hukkam aap bio image dekhona please and bataona ki kese lage
Complete the sentence.
Hexene would have _ carbon atoms and one _ bond
First blank options:
7, 8, 1, 2, 4, 3, 5, 6
Second blank options:
single, double, triple
Answer:
6, double
Explanation:
Hex- is a prefix for number 6.
Ene- is a suffix for a double bond.
Nuclear reactions take place inside the nucleus of the atom. Which of the following does NOT represent an everyday example of a nuclear reaction?
Conversion of carbon dioxide and water in photosynthesis
Hydrogen atoms fused together in the Sun
Loss of protons and electrons in plutonium-240 decay
Energy produced by the Sun that is transferred to Earth
Answer:
Loss of protons and electrons in plutonium 240 decay is not an example of an everyday reaction
Fossils of a dinosaurs would most likely be found in
A)
conglomerate rock
B) sedimentary rock
C)
Igneous rock
D)
metamorphic rock
Answer:
b
Explanation:
Answer:
B
Explanation:
Hey what is your guyses fear, I am terrified of wasp, especially those huge red ones I call red goobers.
Calculate the number of molecules of carbon (IV) oxide
produced when 10g of CaCO3 is treated with 100cm of
0.2mol dm HCl. The equation of the reaction is
CaCO3(s) + 2HCl(aq) → CaCl2(aq) + H2O(1) + CO2(g)
ICa=40 (=12 O=161
Answer: The mass of [tex]CO_2[/tex] produced is 0.44 g
Explanation:
For calcium carbonate:The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of calcium carbonate = 10 g
Molar mass of calcium carbonate = 100 g/mol
Plugging values in equation 1:
[tex]\text{Moles of calcium carbonate}=\frac{10g}{100g/mol}=0.1 mol[/tex]
For HCl:The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(2)
Molarity of HCl = [tex]0.2mol/dm^3=0.2mol/L[/tex] (Conversion factor: [tex]1L=1dm^3[/tex]
Volume of solution = [tex]100cm^3=100mL[/tex] (Conversion factor: [tex]1mL=1cm^3[/tex]
Putting values in equation 2, we get:
[tex]0.2=\frac{\text{Moles of HCl}\times 1000}{100}\\\\\text{Moles of HCl}=\frac{0.2\times 100}{1000}=0.02mol[/tex]
For the given chemical reaction:
[tex]CaCO_3(s)+2HCl(aq)\rightarrow CaCl_2(aq)+H_2O(l)+CO_2(g)[/tex]
By stoichiometry of the reaction:
If 2 moles of HCl reacts with 1 mole of calcium carbonate
So, 0.02 moles of HCl will react with = [tex]\frac{1}{2}\times 0.02=0.01mol[/tex] of calcium carbonate
As the given amount of calcium carbonate is more than the required amount. Thus, it is present in excess and is considered as an excess reagent.
Thus, HCl is considered a limiting reagent because it limits the formation of the product.
By the stoichiometry of the reaction:
If 2 moles of [tex]HCl[/tex] produces 1 mole of [tex]CO_2[/tex]
So, 0.02 moles of [tex]HCl[/tex] will produce = [tex]\frac{1}{2}\times 0.02=0.01mol[/tex] of [tex]CO_2[/tex]
We know, molar mass of [tex]CO_2[/tex] = 44 g/mol
Putting values in equation 1, we get:
[tex]\text{Mass of }CO_2=(0.01mol\times 44g/mol)=0.44g[/tex]
Hence, the mass of [tex]CO_2[/tex] produced is 0.44 g
