Figure 3 shows a stationary metal block hanging from the middle of a stretched wire which is suspended from a horizontal beam. The tension in each half of the wire is 15 N. (a) Calculate for the wire at A, (i) the resultant horizontal component of the tension forces, (ii) the resultant vertical component of the tension forces. Can someone explain why the first one is 0?

Answer:

The correct option is;

a. 12.5 g

Explanation:

The given parameters are;

The initial mass of the radioactive substance = 200 g

The half life of the radioactive substance = 50 years

The time duration for the disintegration = 200 years

The formula for half life is given as follows;

[tex]N(t) = N_0 \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{1/2}}[/tex]

Where:

N(t) = Quantity of the remaining substance

N₀ = Initial radioactive substance quantity  = 200 g

t = Time duration  = 200 years

[tex]t_{1/2}[/tex] = Half life of the radioactive substance  50 years

Therefore, we have;

[tex]N(t) =200 \times \left (\dfrac{1}{2} \right )^{\dfrac{200}{50} } =200 \times \left (\dfrac{1}{2} \right )^4 = 12.5 \ g[/tex]

Therefore, at the end of 200 years, the quantity left = 12.5 g.

Answer:

The correct option is;

Industrial organizational psychologist

Explanation:

Industrial organizational psychology is a branch of the study of psychology that looks into the application of psychological principles and theories in industrial and organizational settings.

An industrial organizational psychologist provide support to organizations such analyzing orientation and behavior, assessment of the organization, training company personnel on how to be or become a good leader, design and development of organizational products , analysis of customer choices, the satisfaction of the customers, and the strategy the organization follows in marketing of their products such as to increase awareness and understanding of human behavior in a workplace setting.

Answer:

Explanation:

Energy of gamma ray = 2.2233 MeV

Let mass of neutron be n  amu  

mass defect of deuteron = 2.013553212 - ( 1.007 276 467 + n ) u .

in terms of energy this mass defect will be equal to energy of gamma ray

1 amu = 931 MeV

931 [ 2.013553212 - ( 1.007 276 467 + n ) ] =  2.2233

( 1.007 276 467 + n ) -  2.013553212  = .00238807733

n = 1.008664822 amu

so mass of neutron = 1.008664822 amu

Explanation:

a) Acceleration is the slope of the velocity vs time graph.  When velocity vs time is a straight line, that means the acceleration is a constant.  F = ma, so the resultant force is also constant.

b) As air resistance increases, the acceleration begins to decrease.

c) A falling object stops accelerating when it reaches terminal velocity.

d) F = ma, so when the acceleration is 0, the resultant force is also 0.

Answer:

449.38 J

Explanation:

ΔS = ΔQ/T

Where ΔS = entropy change

Q = quantity of heat

T = temperature

First reservoir :

T = –30°C = - 30 + 273 = 243K

Q = 400 J

Second reservoir :

T = 0°C = 273K

Q =?

To have same increase in entropy for both reservoirs :

Q/T of first reservoir = Q/T of second reservoir

400/243 = Q/273

243 * Q = 400 * 273

Q = (400 * 273) / 243

Q = 109,200 / 243

Q = 449.38271

Q = 449.38 J

Explanation:

It is given that,

The distance covered by a body along the x-axis is given by :

[tex]x=2t^3+5t^2+t[/tex]

t is in seconds and x is meters

Speed of the body is given by :

[tex]v=\dfrac{dx}{dt}\\\\v=\dfrac{d(2t^3+5t^2+t)}{dt}\\\\v=6t^2+10t+1[/tex]

At t = 0,

[tex]v=6(0)^2+10(0)+1=1\ m/s[/tex]

At t = 2 s,

[tex]v=6(2)^2+10(2)+1=45\ m/s[/tex]

So, the average speed in a time interval from t= 0s and t=2s is 45 m/s.

Explanation:

Volume is the amount of space an object takes up, while mass is the amount of matter in an object. ... To find the volume of an irregular sized object, one would use the displacement method for measuring volume and place the object in water and measure the amount of water that is displaced.

Answer:

To measure the volume of an irregularly shaped object, pour some water in a measuring cylinder. Then suspend the irregularly shaped object with a thread. After that , move the object gradually downwards and immerse it in water. The volume of the irregularly shaped object is the difference between the volume of the liquid before and after. After measuring the difference, we come to know about the volume of the irregularly shaped object.

Answer:

Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.

Explanation:

Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.

Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.

Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:-  flood parts and air vents

flood parts:- at the bottom position and allow water to enter or leave that tank.

air vents:- air vents at the top of the pressure hall,and that they submarine dive.

this time submarine is most modern system is depth is 300 to 450 meters,high pressure  air is 15 bar is tank air valve.

submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.

Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.

Answer:

You have to:

a) Improve your insulation.

b) Install a fence

c) Use modern Acoustic wall panels

d) Plant trees

e) Reduce electronic volumes,e.t.c.

Explanation:

okay.

Answer:

E = 1440 kJ

Explanation:

It is given that,

Power of a cooker oven is 800 W

Voltage at which it is operated is 230 V

Time, t = 30 minutes = 1800 seconds

We need to find the electrical energy used by the cooker oven. The product of power and time is equal to the energy consumed. So,

[tex]E=P\times t\\\\E=800\ W\times 1800\ s\\\\E=1440000\ J\\\\\text{or}\\\\E=1440\ kJ[/tex]

So, electrical energy of 1440 kJ is consumed by the cooker oven.

Answer: Helium=4 is the answer

Explanation:

took the test and got it right that'

s the answer.

Answer:

It's b

Explanation:

I took the quiz on EDGE and got it right.

Answer:

C) 1.5 A

Explanation:

P = IV

180 W = I (120 V)

I = 1.5 A

Answer:

Oxygen-Symbol-O Potassium Symbol-K

A) Valency is the combining capacity of any element. Valence electrons refers to the electrons found in the outermost shell of the atom of the element.

B) Symbol and valency:

C) The reaction would be:

[tex] \large{ \boxed{ \rm{2Mg + O_2 \longrightarrow \: 2MgO}}}[/tex]

[tex] \large{ \boxed{ \rm{Magnesium + Oxygen \longrightarrow Magnesium oxide.

}}}[/tex]

━━━━━━━━━━━━━━━━━━━━

Answer:

The formula for speed is speed=distance

time

Explanation:

to work out what the units are for speed,you need to know the units for distance and time.In this example,distance is in metres(m) and time is in seconds (s) , so the units for speed is metre per second (m/s).

Answer:

The dust present in the clouds.

Explanation:

The complicated composition molecules that can be found in space are generally associated with clouds of dust. The significant amount of dust in these clouds provides protection not only for these molecules, but for any body that makes up or is associated with dust clouds.

It is exactly this dust that protects the molecules against the action of ultraviolet rays.

Answer: 37.5 km

Explanation:

The question is that

If you ran 15 km/hr for 2.5 hours, how much distance would you cover ?

Where

Speed = 15 km/ hr

Time = 2.5 hours

Using the formula for speed.

Speed = distance/time

Substitute speed and time into the formula

15 = distance/ 2.5

Make distance the subject of formula by cross multiplying.

Distance = 15 × 2.5

Distance = 37.5 km.

Answer:

Explanation:

Given that:

For a first order instrument with a sensitivity of .4 mV/K

constant c  = 25 ms = 25 × 10⁻³ s

The initial temperature [tex]T_1[/tex] = 273 K

The final temperature [tex]T_2[/tex] = 473 K

The initial volume = 0.4 mV/K × 273 K = 109.2 V

The final volume =  0.4 mV/K × 473 K =  189.2 V

the instrument’s response as a function of time for a sudden temperature increase can be computed as follows:

Let consider y to be the function of time i.e y(t).

So;

y(t) = 109.2  + (189.2 - 109.2)( 1 - [tex]\mathbf{e^{-t/c}}[/tex])mV

y(t) = (109.2 +  80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV

Plot the response y(t) as a function of time.

The plot of y(t) as a function of time can be seen in the diagram  attached below.

What are the units for y(t)?

The unit for y(t) is mV.

Find the 90% rise time for y(t90) and the error fraction,

The 90% rise time for y(t90) is as follows:

Initially 90% of 189.2 mV = 0.9 ×  189.2 mV

=  170.28 mV

170.28 mV = (109.2 +  80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV

170.28 mV - 109.2 mV = 80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV

61.08 mV =  80 ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV

0.7635  mV = ( 1 - [tex]\mathbf{e^{t/25\times 10^{-3}}}[/tex])) mV

t = 1.44 × 25  × 10⁻³ s

t = 0.036 s

t = 36 ms

The error fraction = [tex]\dfrac{189.2-170.28 }{189.2}[/tex]

The error fraction = 0.1

The error fraction = 10%

Answer:

-40

Explanation:

-40= (9/5)(-40) + 32

=-72 + 32

-40=-40

Answer:

Rounded to three significant figures:

(a) [tex]2 \times 575\; \rm nm = 1150\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].

(b) [tex]\displaystyle \left(1 + \frac{1}{2}\right) \times (575\;\rm nm) \approx 863\; \rm nm = 8.63\times 10^{-7}\; \rm m[/tex].

Explanation:

Consider a double-slit experiment where a wide beam of monochromatic light arrives at a filter with a double slit. On the other side of the filter, the two slits will appear like two point light sources that are in phase with each other. For each point on the screen, "path" refers to the length of the segment joining that point and each of the two slits. "Path difference" will thus refer to the difference between these two lengths.  

Let [tex]k[/tex] denote a natural number ([tex]k \in \left\lbrace0,\, 1,\, 2,\, \dots\right\rbrace[/tex].) In a double-split experiment of a monochromatic light:

The path difference is at a minimum (zero) at the center of the screen between the two slits. That's the position of the first maximum- the central maximum, a bright fringe where [tex]k = 0[/tex] in [tex]\text{Path difference} = 0[/tex].

The path difference increases while moving on the screen away from the center. The first order maximum is at [tex]k = 1[/tex] where [tex]\text{Path difference} = \lambda[/tex].

Similarly, the second order maximum is at [tex]k = 2[/tex] where [tex]\text{Path difference} = 2\, \lambda[/tex]. For the light in this question, at the second order maximum: [tex]\text{Path difference} = 2\, \lambda = 2 \times 575\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].

The dark fringe closest to the center of the screen is the first minimum. [tex]\displaystyle \text{Path difference} = \left(0 + \frac{1}{2}\right)\cdot \lambda = \frac{1}{2}\, \lambda[/tex] at that point.

Add one wavelength to that path difference gives another dark fringe- the second minimum. [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda[/tex] at that point.

For the light in this question, at the second order minimum: [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda = \left(1 + \frac{1}{2}\right)\times (575\; \rm nm) \approx 8.63\times 10^{-7}\; \rm m[/tex].

Answer:

The mass of the object and its height in the gravitational field of the Earth.

Explanation:

If we are talking about gravitational potential energy which is defined as:

[tex]U=m\,*\,g\,*\,h[/tex]

being "m" the object's mass, "g" the acceleration due to gravity, and "h" the height at which the object is located relative to the conventionally picked level for zero of potential energy.

As long as the value of "g" is constant, the only two variables that determine the gravitational potential energy are the mass (m) of the object and its relative height (h).

Answer:

The objects weight and height above Earth's surface

Explanation:

K12 :)

Answer:

D!!!!!

Explanation:

A hypothesis is a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.

Answer:

D. An educated guess about the outcome of an experiment.

Explanation:

Hypothesis is an educated guess about the outcome of an experiment.

Hope this helps ;) ❤❤❤

Answer:

τ= F r     into the blade

Explanation:

The moment of a force is defined by

         τ = F x r

where the bold indicates vectors

Let us write in the expression in magnitude

         τ = F r sin θ

in our case the force is tangent to the wheel therefore the angle between F and the radius is 90º, and the sin 90 = 1

       τ= F r

The direction of τ can be used by the rule of the right hand, the fingers curve in the direction of the torque when advancing from the force to the radius and the thumb points in the direction of the torque.

In this case, for a clockwise rotation, the fingers are curved in the direction and the thumb points into the blade, this is the direction of the τ.

TRASLATE

El momento de una fura es definido por

         τ = F x r

donde la negrillas indican vectores

Escribamos en ta expresión en magnitud

          τ = F r sin θ

en nuestro caso la fuerza es tangente a la rueda por lo tanto el angulo entre F y el radios es 90º, y el sin 90=1

        τ = F r

la dirección de tau la podemos  usar la regla de la mano derecha, los dedos curva en la dirección del torque al avanzar dese la fuerza al radio y el pulgar apunta en la dirección del torque.

En este caso para un giro en sentido horario los dedos se curvan ente sentido y el pulgar apunta hacia dentro de lla hoja, esta es la dirección del troque

Answer:

Creative thinking

Explanation:

As you can see in the question above, when Mandleev needed to organize the chemical elements in a logical, organized and efficient way, he thought until he came to the conclusion of organizing them according to the atomic weight of each one. This is a clear example of creative thinking, which is the term that refers to the act of solving a problem based on thought and reasoning.

Answer:

Creative thinking

Explanation:

Answer:

it will be 8ms-1

Explanation:

MaUa+MbUb=MaVa+MbVb

Explanation:

this is it. hope u understand

Answer:

Explanation:

beacuse the poles are the cause of graIt's due to the rotation of earth about its own axis. Due to the rotation, objects placed on the surface of earth also rotates . Their rotational kinetic energy prevents them from the free fall along gravitational pull. This phenomena can also be explained sitting on the earth surface as their free fall suffers a centrifugal barrier due to the rotation. In this explanation, the term, centrifugal barrier, appears because earth is a non-inertial frame. Centrifugal force in a non intertial frame acts opposite to gravitational force.

The rotational energy / centrifugal barrier on a object depends on the radius of the circle linearly ; the circle is drawn around the axis of rotation from the point where the object placed. Now you can imagine that its radius get shorter and shorter towards the pole from the equator. Hence the barrier decreases if we move from equator to the both poles of earth. Hence garvitational force on a object i.e. its weight, so the g, becomes effectively maximum on the poles and minimum on the equator.

Answer:

v = 60 m/s

Explanation:

It is given that,

A wave is represented by the equation :

[tex]y=0.2\sin [0.4\pi (x-60)t][/tex]

We need to find the velocity of the wave

The general equation of a wave is given by :

[tex]y=A\sin (kx-\omega t)[/tex] ....(1)

Equation (1) can be written as :

[tex]y=0.2\sin (0.4\pi x-24\pi t)[/tex] ...(2)

If we compare equation (1) and (2) we get :

[tex]k=0.4\pi[/tex]

[tex]\omega=24\pi[/tex]

The velocity of a wave is given by :

[tex]v=\dfrac{\omega}{k}\\\\v=\dfrac{24\pi}{0.4\pi}\\\\v=60\ m/s[/tex]

So, the velocity of the wave is 60 m/s.

You haven't told us what any of those letters represents.

I'm going to assume that ...

-- ' P ' = power

-- ' I ' = circuit current

-- ' V ' = circuit voltage

-- ' E ' = energy

-- ' t ' = time.

Now I'm ready to answer the question that I just invented.

P = I / V

V = P x I

Both of these are false statements, and can't be used to calculate anything.

P = I x V   is the correct equation to calculate electrical power.

E = P x t   is the correct equation to calculate electrical energy.

Answer:

I guess i would say the microscope

Explanation:

Because of the microscope, we can see the cells.

Answer:

2

yes

Explanation:

been submitted to the Theme 20 participants will be there was a lot of fun and I will be there at Home