Find the minimum thickness (in nm) of a soap bubble that appears green when illuminated by white light perpendicular to its surface. Take the wavelength to be 549 nm, and assume the same index of refraction as water (nw

Answer:

His angular velocity will increase.

Explanation:

According to the conservation of rotational momentum, the initial angular momentum of a system must be equal to the final angular momentum of the system.

The angular momentum of a system = [tex]I[/tex]'ω'

where

[tex]I[/tex]' is the initial rotational inertia

ω' is the initial angular velocity

the rotational inertia = [tex]mr'^{2}[/tex]

where m is the mass of the system

and r' is the initial radius of rotation

Note that the professor does not change his position about the axis of rotation, so we are working relative to the dumbbells.

we can see that with the mass of the dumbbells remaining constant, if we reduce the radius of rotation of the dumbbells to r, the rotational inertia will reduce to [tex]I[/tex].

From

[tex]I[/tex]'ω' = [tex]I[/tex]ω

since [tex]I[/tex] is now reduced, ω will be greater than ω'

therefore, the angular velocity increases.

Answer:

34°

Using the relation

θᶜ = sin^-1(n₂/n₁),

where n1= the refractive index of light is propagating from a medium

And n2 = refractive index of medium into which light is entering

So we know that

refractive index of diamond at 589nm = 2.41= n₁

refractive index of ethanol at 589nm and 20°C = 1.36= n₂

Thus. θᶜ = sin^-1(1.361/2.417) = 0.58radians = 34°

Explanation:

Answer:

Apparent depth (Da) = 60.15 cm (Approx)

Explanation:

Given:

Distance from fish (D) = 80 cm

Find:

Apparent depth (Da)

Computation:

We know that,

Refractive index of water (n2) = 1.33

So,

Apparent depth (Da) = D(n1/n2)

Apparent depth (Da) = 80 (1/1.33)

Apparent depth (Da) = 60.15 cm (Approx)

The apparent depth of the fish is 60 cm.

To calculate the apparent depth of the fish, we use the formula below.

Formula:

Where:

Make D' The subject of the equation.

From the question,

Given:

Substitute these values into equation 2

Hence, the apparent depth of the fish is 60 cm

Learn more about apparent depth here: https://brainly.com/question/24319677

Answer:

The same amount of current flows through the battery and light bulb

Explanation:

Because for a single loop, the current is the same at every point in the loop. Thus, the amount of current that flows through the lightbulb is the same as the amount that flows through the battery

Answer:

The same amount of current flows through the battery and light bulb

Explanation:

Answer:

v = 6.28 m/s

Explanation:

It is given that,

A windmill on a farm rotates at a constant speed and completes one-half of a rotation in 0.5 seconds,

Number of revolution is half. It means angular velocity is 3.14 radians.

Let v is the angular speed. So,

[tex]v=\dfrac{\omega}{t}\\\\v=\dfrac{3.14}{0.5}\\\\v=6.28\ m/s[/tex]

So, the rotation speed is 6.28 m/s.

The angular velocity is the rotation speed, which is the angle of rotation

of the windmill per second, which is 2·π radians.

Response:

The given parameter are;

The angle of rotation the windmill rotates in 0.5 seconds = One-half a

rotation.

Required:

The rotational speed (angular velocity)

Solution:

The angle of one rotation = 2·π radians

Angle of one-half ration = [tex]\frac{1}{2}[/tex] × 2·π radians = π radians

[tex]Rotational \ speed = \mathbf{\dfrac{Angle \ of \ rotation}{Time}}[/tex]

Which gives;

[tex]Rotational \ speed, \omega = \dfrac{\pi}{0.5 \ s} = \mathbf{2 \cdot \pi \ rad/s}[/tex]

Learn more about rotational speed here:

https://brainly.com/question/6969329

Answer:

Explanation:

Formula used for calculating power P = current * voltage

P = IV

From ohms law, V = IR where R is the resistance. Substituting V = IR into the formula for calculating power, we will have;

P = IV

P =(V/R)V

P = V²/R

Given parameters

Power rating of the bulb P = 100 Watts

Source voltage V = 110V

Required

Resistance of the bulb R

Substituting the given parameters into the formula for calculating power to get Resistance R;

P = V²/R

100 = 110²/R

R = 110²/100

R = 110 * 110/100

R = 12100/100

R = 121 ohms

Hence, the resistance of this bulb is 121 ohms

Answer:

m = 9.1 x 10⁶ kg

Explanation:

First, we need to find the rate of heat transfer through the box to the ice. For this purpose, we use Fourier's Law of Heat Conduction:

Q = KA ΔT/L

where,

Q = Rate Of Heat Transfer = ?

K = Thermal Conductivity = 0.16 KW/m.°C = 160 W/m.°C

A = Area = 1.5 m²

ΔT = Difference in Temperature = 29°C - 0°C = 29°C

L = Thickness of wall = 2 cm = 0.002 m

Therefore,

Q = (160 W/m °C)(1.5 m²)(29°C)/(0.002 m)

Q = 3.48 x 10⁶ W

Now, we find the amount of heat transferred in one day to the ice:

q = Qt

where,

q = amount of heat = ?

t = time = (1 day)(24 h/1 day)(3600 s/1 h) = 86400 s

Therefore,

q = (3.48 x 10⁶ W)(8.64 x 10⁴ s)

q = 3 x 10¹¹ J

Now, for mass of ice melted in a day:

q = m H

m = q/H

where,

m = mass of ice melted in a day = ?

H = latent heat of fusion of ice = 3.3 x 10⁵ J/kg

Therefore,

m = (3 x 10¹¹ J)/(3.3 x 10⁵ J/kg)

m = 9.1 x 10⁶ kg

Answer:

t(min) = 94nm

Explanation:

The wavelength of the light incident is 500 nm.

The refractive index of the film is 1.33.

The minimum thickness of the soap film required for constructive interference.

The thickness of the film for the constructive interference is given by:

2*t= (m + 1/2) λ′

Now, λ′ = λ/μ = 500/1.33 = 376nm

The minimum thickness of the film

′t′ will be at m=0 :

2*t(min) = (0 + 1/2) 376

t(min) = 94nm

Answer:

The direction of the force will be towards the east

Explanation:

From the question we are told that  

    The direction of the  downward

Generally according to Fleming's right-hand rule(

          Thumb -  direction of force

           Middle finger -  direction of current

           Index finger -  direction of the magnetic field

) and the fact that the earth magnetic field acts  from south to north with respect to the four cardinal points then the direction of the  force will be toward the east with respect to the four cardinal point on the earth

Answer:

Explanation:

Using the Continuity equation

v X A = v' xA'

so if A is 1/2of A' then A velocity must be 2 times the A'

after-contraction v = 2 x 5.0m/s = 10m/s

Using the Bernoulli equation

p₁ + ½ρv₁² + ρgh₁ = p₂ + ½ρv₂² + ρgh₂

, the "h" terms cancel

3.5 x 10^ 5Pa + ½ x 1000kg/m³x (5.0m/s)² = p₂ + ½ x 1000kg/m³ x (10m/s)²

p₂ = 342500pa

Answer:

Explanation:

To solve for the power consumed by the trains motor we have to employ the formula for power which is

Power= current * voltage

Given that

voltage V= 800 V

current I= 2130 A

Substituting in the formula for power we have

Power= 2130*800=  1704000 watt

Power = 1704 kW

This is the amount of energy consumed, transferred or converted per unit of time

Hence the power consumed  by the trains motor is 1704 kW

Answer:

a)   Δt = 24.96 s , b)  τ = 0.078 N m

Explanation:

This is a rotational kinematics exercise

        θ = w₀ t - ½ α t²

Let's reduce the magnitudes the SI system

       θ = 60 rev (2π rad / 1 rev) = 376.99 rad

       w₀ = 7.0 rot / s (2π rad / 1 rpt) = 43.98 rad / s

      α = (w₀ t - θ) 2 / t²

let's calculate the annular acceleration

      α = (43.98 10 - 376.99) 2/10²

      α = 1,258 rad / s²

Let's find the time it takes to reach zero angular velocity (w = 0)

        w = w₀ - alf t

         t = (w₀ - 0) / α

         t = 43.98 / 1.258

         t = 34.96 s

this is the total time, the time remaining is

         Δt = t-10

         Δt = 24.96 s

To find the braking torque, we use Newton's law for angular motion

        τ = I α

the moment of inertia of a circular ring is

       I = M r²

we substitute

         τ = M r² α

we calculate

        τ = 0.625  0.315²  1.258

        τ = 0.078 N m

The total time taken by the wheel to come to rest is 25.18 s and the magnitude of the frictional torque is 25.18 N-m.

Given data:

The initial angular speed of wheel is, [tex]\omega = 7.0 \;\rm rps[/tex]   (rps means rotation per second).

The time interval is, t' = 10.0 s.

The number of rotations made by wheel is, n = 60.0.

The mass of bike wheel is, m = 0.625 kg.

The radius of wheel is, r = 0.315 m.

The problem is based on rotational kinematics. So, apply the second rotational equation of motion as,

[tex]\theta = \omega t-\dfrac{1}{2} \alpha t'^{2}[/tex]

Here, [tex]\theta[/tex] is the angular displacement, and its value is,

[tex]\theta =2\pi \times 60\\\\\theta = 376.99 \;\rm rad[/tex]

And, angular speed is,

[tex]\omega = 2\pi n\\\omega = 2\pi \times 7\\\omega = 43.98 \;\rm rad/s[/tex]

Solving as,

[tex]376.99 = 43.98 \times 10-\dfrac{1}{2} \alpha \times 10^{2}\\\\\alpha = 1.25 \;\rm rad/s^{2}[/tex]

Apply the first rotational equation of motion to obtain the value of time to reach zero final velocity.

[tex]\omega' = \omega - \alpha t\\\\0 = 43.98 - 1.25 \times t\\\\t = 35.18 \;\rm s[/tex]

Then total time is,

T = t - t'

T = 35.18 - 10

T = 25.18 s

Now, use the standard formula to obtain the value of braking torque as,

[tex]T = m r^{2} \alpha\\\\T = 0.625 \times (0.315)^{2} \times 1.25\\\\T = 0.0775 \;\rm Nm[/tex]

Thus, we can conclude that the total time taken by the wheel to come to rest is 25.18 s and the magnitude of the frictional torque is 25.18 N-m.

Learn more about the rotational motion here:

https://brainly.com/question/1388042

Answer:

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

Explanation:

This question suggests that the car is accelerating forward. Thus, the easiest way for us to know what friction is doing is for us to know what happens when we turn friction off.

Now, if there is no friction and the car is stopped, if we push down on the accelerator, it will make the front wheels to spin in a clockwise manner. This spin occurs on the frictionless surface with the rear wheels doing nothing while the car doesn't move.

Now, if we apply friction to just the front wheels, the car will accelerate forward while the back wheels would be dragging along the road and not be spinning. Thus, friction opposes the motion and as such, it must act im a direction opposite to where the car is going. This must be static friction.

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

Answer:

The highest percentage of change corresponds to the thinnest rod, the correct answer is a

Explanation:

For this exercise we are asked to change the length of the bar by the action of a force applied along its length, in this case we focus on the expression of longitudinal elasticity

               F / A = Y ΔL/L

where F / A is the force per unit length, ΔL / L is the fraction of the change in length, and Y is Young's modulus.

In this case the bars are made of the same material by which Young's modulus is the same for all

              ΔL / L = (F / A) / Y

the area of ​​the bar is the area of ​​a circle

               A = π r² = π d² / 4

               A = π / 4 d²

we substitute

              ΔL / L = (F / Y) 4 /πd²

changing length

               ΔL = (F / Y 4 /π) L / d²

The amount between paracentesis are all constant in this exercise, let's look for the longitudinal change

a) values ​​given d and 3L

               ΔL = cte 3L / d²

               ΔL = cte L /d²  3

To find the percentage, we must divide the change in magnitude by its value and multiply by 100.

                ΔL/L % = [(F /Y  4/π 1/d²) 3L ] / 3L 100

                ΔL/L  % = cte 100%

b) 3d and L value, we repeat the same process as in part a

               ΔL = cte L / 9d²

               ΔL = cte L / d² 1/9

               ΔL / L% = cte 100/9

               ΔL / L% = cte 11%

c) 2d and 2L value

               ΔL = (cte L / d ½ )/ 2L

               ΔL/L% = cte 100/4

               ΔL/L% = cte 25%

d) value 4d and L

               ΔL = cte L / d² 1/16

                ΔL/L % = cte 100/16

                ΔL/L % = cte 6.25%

The highest percentage of change corresponds to the thinnest rod, the correct answer is a

Answer

76200meters

Explanation:

we know that 1km=1000meters

to convert km into meters we we divide km by meters

=76.2/1000

=76200meters

Answer:

The  radius of the earth is [tex]r = 6365.4 \ km[/tex]

Explanation:

From the question we are told that

     The distance at  Alexandria is  [tex]d_a = 800 \ km = 800 *10^{3} \ m[/tex]

      The angle of the sun is  [tex]\theta = 7.2 ^o[/tex]

So we want to first obtain the circumference of the earth

   So let assume that the earth is  circular ([tex]360 ^o[/tex])

  Now from question we know that the sun made an angle of [tex]7.2 ^o[/tex] so with this we will obtain how many  [tex](7.2 ^o)[/tex]  are in [tex]360^o[/tex]

 i.e    [tex]N = \frac{360}{7.2}[/tex]

=>      [tex]N = 50[/tex]

     With this  value we can evaluate the circumference as

             [tex]c = 50 * 800[/tex]

              [tex]c = 40000 \ km[/tex]

Generally circumference is mathematically represented as

        [tex]c = 2\pi r[/tex]

         [tex]40000 = 2 * 3.142 * r[/tex]

=>        [tex]r = 6365.4 \ km[/tex]

Answer:

At the moment contact is made with the battery, the voltage across the resistor is equal to the batteries terminal voltage

Explanation;

Because at series connection the battery and resistor have equal voltage

Answer:

 I = 7.96 W / m²

Explanation:

The light bulb emits a power of P = 100W, this power is distributed over the surface of a sphere, thus the emission is in all directions.

Intensity is defined by power per unit area

            I = P / A

The area of ​​a sphere is

         A = 4π r²

we substitute

         I = P / (4π r²)

in this case it tells us that the distance is r = 1 m

let's calculate

        I = 100 / (4π 1²)

        I = 7.96 W / m²

Answer:

Explanation:

initial velocity u = 20 m /s

final velocity v = 36 m /s

time taken t = 4 s .

acceleration = (v - u) / t

= (36 - 20) / 4

a = 4 m / s ²

from the formula

v² - u² = 2 a s  , s is distance covered .

putting the values

36² - 20² = 2 x 4 x s

1296 - 400 = 8 x s

s = 112 m .

Answer:112

Explanation:

Answer:

the pressure after contraction is 2×10^5 Pa

the speed after contraction is 15m/s

Explanation:

We were given Pressure P to be 3.5 x 10^5 that is Flowing with speed of 5.0 m/s,

For us to calculate pressure we need to calculate the area first as;

Let initial Area = A₁

And Final area A₂

We were told that in a horizontal pipe it contracts to 1/3 its former area. Which means

A₂= A₁/3.................

V₁ is the speed

the pressure and speed of the water after the contraction can be calculated using equation of continuity below

A₂V₂ = A₁V₁

But

If we substitute given value in the expresion we have

V₂ = (3A *5)/A

V₂ = 15m/s

Therefore, the speed after contraction is 15m/s

Now we can calculate the pressure using

Bernoulli's equation

p₁ + ½ρv₁² + ρgh₁ = p₂ + ½ρv₂² + ρgh₂

But we know that the pipe is horizontal, then "h" terms cancel out then

p₁ + ½ρv₁² = p₂ + ½ρv₂²

Making P₂ subject of formula we have

p₂ = 0.5ρ( V ₁² - v₂² ) + P₁

P₂=. 0.5 × 1000 (5² -15² ) + 3*10^5

=2×10^5 Pa

Therefore, the pressure after contraction is 2×10^5 Pa

(a)  the final speed of the water after contraction is 15 m/s.

(b) The final pressure of the water after contraction is 2.5 x 10⁵ Pa.

The given parameters;

Let the initial area of the pipe = A₁

Apply the continuity equation to determine the final speed of the water after contraction as follows;

[tex]A_1 V_1 = A_2 V_2\\\\V_2 = \frac{A_1V_1}{A_2} \\\\V_2 = \frac{A_1 \times 5}{\frac{1}{3} A_1 } \\\\V_2 = 15 \ m/s[/tex]

The final pressure of the water after contraction is determined by applying Bernoulli's equation for horizontal pipe;

[tex]P_1 + \frac{1}{2} \rho V_1^2= P_2 + \frac{1}{2} \rho V_2^2\\\\P_2 = \frac{1}{2} \rho (V_1^2 - V_2^2) + P_1\\\\P_2 = \frac{1}{2} \times 1000(5^2 - 15^2) + 3.5 \times 10^5\\\\P_2 = 2.5 \times 10^5 \ Pa[/tex]

Learn more here:https://brainly.com/question/19566865

Answer:

The  value [tex]y = 0.0349 \ m[/tex]

Explanation:

From the question we are told that

   The  distance of the screen is  [tex]D = 2.30 \ m[/tex]

   The  width of the slit is  [tex]d = 0.0368 \ nm = 0.0368 *10^{-3} \ m[/tex]

   The  wavelength is  [tex]\lambda = 558 \ nm = 558 *10^{-9} \ m[/tex]

The  width of the central diffraction peak is  mathematically represented as

        [tex]k = 2 * y[/tex]

Where  y is the distance from the center to the high peak which  is mathematically represented as

       [tex]y = \frac{\lambda * D }{d }[/tex]

substituting values

      [tex]y = \frac{ 558 *10^{-8} * 2.30 }{0.0368 *10^{-3} }[/tex]

      [tex]y = 0.0349 \ m[/tex]

Answer:

it is going to D. all of these are resistors

Answer:

12.2 m

Explanation:

Given:

v₀ = 15.6 m/s

v = 0 m/s

a = -10 m/s²

Find: Δy

v² = v₀² + 2aΔy

(0 m/s)² = (15.6 m/s)² + 2 (-10 m/s²) Δy

Δy = 12.2 m

[tex] \LARGE{ \boxed{ \rm{ \green{Answer:}}}}[/tex]

Given,

Finding the initial kinetic energy,

[tex]\large{ \boxed{ \rm{K.E. = \frac{1}{2}m {v}^{2}}}}[/tex]

⇛ KE = (1/2)mv²

⇛ KE = (1/2)(0.042)(15.6)²

⇛ KE = 5.11 J

|| ⚡By conservation of energy, the potential energy at the highest point will also be 5.11 J, since there is no kinetic energy at the highest point because the ball is not moving (we neglect energy lost due to air resistance, heat, sound, etc.) ⚡||

So, we have:

[tex] \large{ \boxed{ \rm{P.E. = mgh}}}[/tex]

⇛ h = PE/(mg)

⇛ h = 5.11 J /(0.042 × 9.8)

⇛ h = 12.41 m

✏The ball will rise upto a height of 12.41 m

━━━━━━━━━━━━━━━━━━━━

Answer:

0.09N, attractive

Explanation:

It can be deducted from the question that the currents are arranged in parallel settings, then it is obvious that the force on each of the wire will be attractive toward the other wire.

the magnitude of force can be determined by using below formula;

F2 = (μ₀/2π)(I₁I₂/d)I₂

μ₀ = constant = 4π × 10^-7 H/m,

I₁, I₂ = currents= 30A

L = the length o the wire=30m

d = distance between these two wires= 0.06m

Since the current are arranged in the same direction, they exhibit attractive force on each other.

Then plugging the values Into the formula above we have

F₂ = (4π × 10^-7 T.m/A)/2π) × ((30A)²/ 0.06m)× 30 m

= 0.09 N, attractive

Therefore, the magnitude and direction of the force is 0.09 N, attractive

Answer:

386.13 N

Explanation:

The kinetic energy of the baseball is converted into workdone in moving the glove backward( work energy theorem).

Therefore, KE of the ball

[tex]\frac{1}{2} mv^2 =\frac{1}{2}(0.145)35^2\\ = 88.81 \text{J}[/tex]

Now, workdone in moving the glove

W= Fd

where F = Force applied, d = displacement of the glove= 0.23 cm.

88.81 = F×0.23

F= 88.81/0.23 = 386.13 N

Answer:

Explanation:

The moment of inertia of the disk I  = 1/2 m R² where R is radius of the disc and m is its mass .

putting the values

I = .5 x 95 x .38²

= 6.86 kg m²

n = 87 rpm = 87 / 60 rps

n = 1.45 rps

angular velocity ω = 2π n , n is frequency of rotation .

= 2 x 3.14 x 1.45

= 9.106 radian /s

frictional force = 16 x .2

= 3.2 N

torque created by frictional force = 3.2 x .38

= 1.216 N.m

angular acceleration = torque / moment of inertia

= - 3.2 / 6.86

α  = - 0.4665 rad /s²

b ) ω² = ω₀² +  2 α θ , where α is angular acceleration

0 = 9.106² - 2 x .4665 θ

θ = 88.87 radian

no of turns = 88.87 / 2π

= 14.15  turns

Answer:

77.96dB

Explanation:

Recall that decibels are a unit of measuring intensity of sound, and depend on the logarithm of the intensity

the intensity, measured in decibels is given by:

I(db)=10log(I/I0)

I is the intensity in MKS units; I0 is the threshold intensity for human hearing (10^-12 W/m^2)

Thus, if the two sounds together have a dB of 81, we know:

81=10log(I/I0)

using the data above, we can find the intensity of the two sounds to be

0.000125 W/m^2

therefore, one firecracker has an intensity half of that, or 0.0000625W/m^2

now use this value to find the dB of one firecracker:

I(dB0=10log(0.0000625/10^-12)=77.96dB

Answer:

I. light house 1 will be warmer during the day ii. light house 2 will be warmer at night.

Explanation:

Because the land conducts heat better than water the light house farthest away from the water will get hotter during as the ground will heat up faster than the water. But this also means that the ground will lose heat faster at night where the water won't making the light house closest to the water hotter at night.

Answer:

Knowledge of vectors is important because many quantities used in physics are vectors. If you try to add together vector quantities without taking into account their direction you'll get results that are incorrect.

Explanation:

An example of the importance of vector addition could be the following:

Two cars are involved in a collision. At the time of the collision car A was travelling at 40 mph, car B was travelling at 60 mph. Until I tell you in which directions the cars were travelling you don't know how serious the collision was.

The cars could have been travelling in the same direction, in which case car B crashed into the back of car A, and the relative velocity between them was 20 mph. Or the cars could have been travelling in opposite directions, in which case it was a head on collision with a relative velocity between the cars of 100 mph!