For a three-slit interference pattern, find the ratio of the peak intensities of a secondary maximum to a principal maximum.

A fisherman has caught a fish on his pole, and to keep the pole steady he has to apply an upward force is [tex]=\quad m=(205-182.391[/tex]

What is force?

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

[tex]\begin{aligned}& F_2=235 \mathrm{~N} \\& \theta=60.5^{\circ} \\& L=3.5\mathrm{~m} \\& d=0.45\mathrm{~m}\end{aligned}[/tex]

calculating torame about 'A'

For equilibrium[tex]$\sum \tau_A=0$[/tex]

$$[tex]$$\begin{aligned}& \Rightarrow \quad \vec{F} \times \vec{L}+\vec{F}_2 \times(\overrightarrow{L-d)}=0 \\& \Rightarrow \quad \vec{F}_1 \times \overrightarrow{L_1}=-\vec{F}_2(\overrightarrow{L-d}) \\& \Rightarrow \quad F_1 \cdot L \sin \theta=F_2 \cdot(L-\alpha) \sin \theta \\& \Rightarrow \quad F_1=F_2 \frac{(L-a)}{L} \\& \Rightarrow \quad F_1=235 \cdot \frac{(3.5-0.35)}{3.2} \\& F_1=182.58 \mathrm{~N} \\&\end{aligned}$$[/tex]

[tex]For equilibrium $\quad \Sigma$ fret $=0$$$\begin{aligned}& \Rightarrow \quad \overrightarrow{F_2}+\overrightarrow{F_1}+\overrightarrow{m_g}=\overrightarrow{0} \\& \Rightarrow \quad m g .=F_2-F_1 \\& \Rightarrow \quad m=\left|\frac{F_2-F_1}{g}\right| \\& \Rightarrow m=\frac{(205-182.591}{9.8} \\& m=2.288 \mathrm{~kg} \\&\end{aligned}$$[/tex]

To learn more about force visit

https://brainly.com/question/26115859

#SPJ4

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv). the particles  eventually move back together because of mutual gravitational attraction.

As depicted in the following diagram, assume that two particles are present at positions P and Q at some point in time.

Think about a point R that is y miles away from a point Q, or QR=y PR=dy.

LP=mv0+mvd=mvd is the system's angular momentum around point P.

I The system's angular momentum around point Q is given by LQ=mvd+mv0=mvd.....(ii)

System's angular momentum about point R is given by LR=mv(d, y)+mv(y, d)=mvd....(iii)

The result of comparing equations I (ii), and (iii) is L P = LQ = LR....... (iv)

The angular momentum of a system does not depend on the point about which it is taken, according to equation (iv).

All objects with mass are attracted to one another by the gravitational attraction, which has a magnitude that is directly proportional to the masses of the two objects and inversely proportional to the square of their distance from one another.

Our feet remain firmly planted on the ground thanks to gravity, which also keeps the Moon in orbit around the Earth, the Earth in orbit around the Sun, the Sun in orbit around the galactic core of our Milky Way galaxy, and the Milky Way and Andromeda galaxies orbiting each other.

Learn more about galaxy here:

https://brainly.com/question/2905713

#SPJ4

The magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.

Force is an external influence that can change the velocity or motion of an object.

Speed of the motorcycle = v = 18 m/s

Radius of curvature of the hill top = r = 142 m

Total mass of the motorcycle and driver = m = 300 kg

A centripetal force is a force acting on an object in a curvilinear motion toward the axis of rotation or center of curvature.

Mathematically, it is Fc = (mv²)/r

Fc = (300 * 18²) / (142)

Fc = 684.50 N

Normal force (N) acting on the motorcycle can be calculated by the equation:

Fc = mg - N

684.50 = (300 * 9.81) - N

N = 2943 - 684.5

N = 2258.5 N

Therefore the magnitude of centripetal force is 684.50 N and the magnitude of normal force is 2258.5 N.

The question is incomplete, the complete question is "he is driving on a motorcycle at 18 m/s as he passes over the top of a hill whose radius of curvature is 142m. The mass of the motorcycle and driver is 300 kg. Find the magnitudes of the following.

a) magnitude of centripetal force

b) magnitude of normal force

To know more about force,

https://brainly.com/question/15343432

#SPJ4

The inner radius of a hollow metal sphere is a, and the outside radius is b.  The hollow sphere has a point charge q in the center. There will be a distribution of q charges on the inner surface.

Electric charge can be interpreted as an excess or shortage of electrons and is the amount of imbalanced electricity (either positive or negative) in a body. There are two varieties: positive (+) and negative (–).

We all studied the structure of an atom with an equal amount of protons, neutrons, and electrons in physics and chemistry. Protons are positively charged, neutrons are neutrally charged, and electrons have a negative charge.

To learn more about electric charge visit:

brainly.com/question/9194793

#SPJ4

The given question is incomplete. The complete question is:

A hollow metal sphere has inner radius 'a' and outer radius 'b'. The hollow sphere has charge +2Q. A point charge +Q sits at the center of the hollow sphere. How much charge is on the inside surface of the hollow sphere?

The path taken by a light beam after passing through a mirror's focus is where it hits the mirror and reflects back in exactly the same direction as it went in.

Specular reflection is the name for this. A smooth surface allows light to bounce back at the same angle that it was incident. Rays of light that are reflected off of a smooth surface go in that same direction.

The narrow beams of light that travel in straight lines along their courses as electromagnetic waves are known as rays. Though its path might be altered by reflection or refraction, light always moves in a straight line.

To know more about path of the light ray visit :-

https://brainly.com/question/3703500

#SPJ1

The distance travelled by the car after the brake was applied is 125 m.

The distance travelled by the car is calculated by applying the following kinematic equation as shown below.

Mathematically, the distance travelled by the car at the given average speed is calculated as;

s = [ ( v + u ) / 2 ] t

where;

The distance travelled by the car is calculated as;

s = [ ( 0 + 25 m/s ) / 2 ] ( 10 s )

s = 125 m

Learn more about distance travelled here: https://brainly.com/question/24283318

#SPJ1

The value of R so that the response is critically damped using the equation is 25.0Ω.

Farads is the unit of measure for capacitance, which is the amount of electrical charge stored for a given voltage. Farads can be used to measure the amount of energy stored in a capacitor, which is made up of two conductive plates separated by an insulating material. The higher the capacitance, the more energy can be stored in a given capacitor. Farads are named after Michael Faraday, the British scientist who discovered the relationship between electricity and magnetism.

The resonant frequency of an RLC circuit is given by the equation:
ω_r=1/sqrt(LC)
where ω_r is the resonant frequency in rad/s, L is the inductance in Henries, and C is the capacitance in Farads.
Given the resonant frequency of 5000 rad/s and the inductance of 10 mH, we can calculate the capacitance as follows:
C=1/(ω_r^2*L)
C=1/(5000^2*0.01)
C=4.00μF
We can find the value of R so that the response is critically damped using the equation:
R=2*sqrt(L/C)
R=2*sqrt(0.01/4.00)
R=25.0Ω

To learn more about Farads
https://brainly.com/question/24175851
#SPJ1

The experimental procedures that will allow the students to determine both of these relationships is option E:

The formula  F = IL x B calculates the magnetic force acting through a magnetic field on a current-carrying wire. The magnetic field acts on a wire when a current is conducted through it in a direction that is perpendicular to both the magnetic force.

By increasing the amount of current flowing through the wire, the magnetic field's strength can be enhanced. As you get further from the wire, the strength gets weaker. If the amount of current flowing through it stays constant, its length and thickness have no bearing.

Therefore, the length of the wire in the magnetic field has an impact on the magnetic force's strength as well. The force acting on a wire increases with wire length in a magnetic field.

Learn more about experimental procedures from

https://brainly.com/question/17274244
#SPJ1

A particle moves under the influence of a conservative force, The maximum x-coordinate of the particle at x = -3 m is 7 m.

Given that,

Potential energy of the particle u(x) = 5x² - 20x + 2

We know the relation between force and potential energy as,

F = -du/dx = -d/dx (5x² - 20x + 2) = -(10 x - 20 ) = 20 - 10 x at mean position x = 2.

At x = -3, amplitude is given by x = 2 - (-3) = 5

The maximum x co-ordinate is given as x = 5 + 2 = 7 m

To know more about potential energy function:

https://brainly.com/question/29998972

#SPJ4

I think it is "energy cannot be destroyed but it can change forms".

Answer:

Here, h1=4.00m,h92)=3.00m,Delta t =0.01 s.Letv1 be the velocity of the ball (actind downwards) just before striking the floor an dv20 be the velocity of the ball (acting upwaeds) ust after striking the floor. Then, change in velocity of the ball in time Δtv2−(−v1)v2+v1

:. acceleration, a=v2+v1Δt ..(i)

When body falls from height h1,

then u=o,v1,a=gandS=h1

As, v21=u2+2aS,

:. v_(1) ^(2) =0 + g h_(10 or v12–√gh1

Taking motion of the ball after striking the floor, then u=v2,v=0,a=−g,S=h2

As, v2=u22as,∴v21=0+2gh1orv_(1) =sqrt 32 g h_(1)Tak∈gmotionoftheballa>erstrik∈gthe⌊,⌋thenu=v_(2), v=0, a=- g, S=h_(2)As,v2=u2+2aS,wehave0 = v_(2)^(2) +2 (-g) h_92) otr v2=2–√gh2

Putting values in (i) we get,

a=2–√gh2+2–√gh1Δt)

a=2–√×9.8×3+2–√×9.8×40.01

= 1652m/s2.

Explanation:

The force exerted at the large piston will be double in magnitude in comparison with the force applied at the smaller piston.

We know, according to the pascal's law,

The pressure applied at any point in the incompressible fluid is equal in magnitude at each and every point.

So,

P = Force/Area

Where P is pressure,

If pressure is same, then we can write,

F₁/A₁ = F₂/A₂

Where,

F₁ is the force applied at the small piston,

A₁ is the area of the smaller piston,

F₂ is the force at the larger piston,

A₂ is the area of the larger piston,

It is also given that, area if the larger piston is two times the area of the smaller piston so,

A₂ = 2A₁

So, putting the values we get,

F₂/F₁ = 2

So, F₂ = 2F₁

It means that the force exerted by the larger piston will be double in magnitude.

To know more about Pascal's Law:

brainly.com/question/4262025

#SPJ4

The weight of the staging is 550N.

The weight of an object, the gravitational force caused by the presence of a large second object such as the Earth or the Moon.

The unit of measurement for weight is indeed a unit of force. This unit in the International System of Units (SI) is the Newton.

Given data : Weight of the painter ([tex]W_{p}[/tex]) = 300 N

                    Left scale's weight reading [tex](W_{L} )[/tex] = 580 N

                    Right scale's weight reading [tex](W_{R} )[/tex] = 270 N

To find the weight of the staging [tex](W_{s} )[/tex], we will set all the weight in the equilibrium.

Since the force of the staging and painter's weight is going downward we will denote them as negative. The opposite will be placed for the reading of weight on the left and right scale, which is positive.

[tex]-W_{p} -W_{s} +W_{L}+W_{R} = 0[/tex]

[tex]-300N-W_{s} +580N + 270N = 0\\[/tex]

[tex]W_{s}[/tex] [tex]= -300N+580N+270N[/tex]

[tex]W_{s}[/tex] [tex]= 550N[/tex]

Learn more about Weight here :-

https://brainly.com/question/86444

#SPJ4

The right response is option number B. Electric field can be represented by a vector arrow because of vector quantity. To calculate the size of the electric field, we can apply the equation E=k |Q| r2E=k|Q| r2.

The electrical force acting on a positive test charge at a location in space has the same direction as the electrical field there.

Electric field components can be found in electromagnetic waves , X-rays, radio waves, and microwaves. Within a conductor that is carrying current, there is an external electric field. Charges create electrical fields.

Learn more about uv light here:

https://brainly.com/question/23342892

#SPJ4

The correct option is that C. The induced current will be clockwise until the bottom of the loop reaches the wire and will be counterclockwise when the bottom of the loop goes below this point. This is because the induced current is proportional to the rate of change of the magnetic field flux, which increases when the bottom of the loop is above the wire and decreases when the bottom of the loop is below the wire.

According to Faraday's law, the magnetic flux change rate in a circuit equals the magnitude of the induced EMF in the circuit. Additionally inversely correlated with the rate of change of magnetic flux in the circuit is hens induced current.

Lenz's law states that an induced current will flow in the opposite direction of the cause that is causing it. When the bottom of the loop is below this point, the induced current is counterclockwise until the bottom of the loop reaches the wire. This is because the magnetic field flux changes more quickly when the bottom of the loop is above the wire because the induced current is proportional to this

Learn more about current on:

https://brainly.com/question/24858512

#SPJ1

According to the Maxwellian speed distribution, as the temperature increases, the number of molecules with speeds within a small interval decreases.

Temperature is a bodily quantity that expresses the perceptions of hotness and coldness. Temperature is measured by using a thermometer. Thermometers are calibrated in diverse temperature scales that have been trusted by various reference points and thermometric materials for definition.

Temperature plays a vital role in hospital treatment,  food, drinks, and agriculture. Our health is often reliant upon the temperature in many methods as properly. Preserving the right temperature degrees in cold garage areas is crucial.

The SI unit of temperature as in line with the international machine of units is Kelvin that's represented by the symbol K.

Learn more about Temperature here:-https://brainly.com/question/28752847

#SPJ4

Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry.   (True)

Combining deuterium exchange mass spectrometry (DXMS) and molecular dynamics, we investigated the binding of group IVA (GIVA) phospholipase A2 (PLA2) inhibitors (MD). On the basis of deuterium exchange results, models of the GIVA PLA2 inhibitors pyrrophenone and the 2-oxoamide AX007 docked into the protein were created, and comprehensive molecular dynamics simulations were performed to determine protein–inhibitor interactions. The models demonstrate that both inhibitors interact with crucial residues that modify the deuterium exchange pattern in response to inhibitor binding. Pyrrophenone is primarily associated with the protein through contacts close to the active site, whereas oxoamide is primarily attached through contacts remote from the active site. We also compare the dynamics of the two inhibitor-bound complexes around the active site. It is possible to create better inhibitors against GIVA PLA2 by combining computational and experimental approaches to define more precise inhibitor binding locations.

Mass Spectrometry:

In order to determine the mass-to-charge ratio (m/z) of one or more molecules found in a sample, mass spectrometry is a valuable analytical instrument. The precise molecular weight of the sample's constituent parts can frequently be determined using these measures as well. Mass spectrometers are typically used to quantify known substances, identify novel compounds by molecular weight determination, and assess the structure and chemical characteristics of molecules.

∴ Location of inhibitors bound to group iva phospholipase a2 determined by molecular dynamics and deuterium exchange mass spectrometry.   (True)

Learn more about Mass Spectrometry here

https://brainly.com/question/14569480

#SPJ4

(a) The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c) The wavelength, in nanometers, of the light source;

                                   λ = 331.7 nm

(d) The slit width, in micrometers;

                                   d = 20.5 µm

(a) We know that Fringe width is given by,

                                  [tex]\beta =\frac{D\lambda}{d}[/tex]

Where,

           D = slit to screen distance

           λ = wavelength

           d = slit width

Given in the question,

           D = 2.05 m

           [tex]\beta =4 cm=0.04m[/tex]

Now,

          [tex]\frac{d}{D} =\frac{\lambda}{\beta } =\frac{400*10^{-9} }{0.04}[/tex]

                 d/D = 0.0001

Hence,

            The ratio of the slit separation d, to the slit width D;

                               d/D = 0.0001

(b) Ratio of d & λ,

                            [tex]\frac{d}{\lambda} =\frac{D}{\beta }[/tex]

                            [tex]\frac{d}{\lambda}=\frac{2.05}{0.04}[/tex]

                            [tex]\frac{d}{\lambda}=51.25[/tex]

Hence,

           The ratio of the slit width to the wavelength of the light source λ;

                                d/λ = 51.25

(c)  The wavelength of the light source,  

                            [tex]\lambda=\frac{D\beta }{d}[/tex]

                            [tex]\lambda=\frac{17*10^{-6} *0.04}{2.05}[/tex]

                            [tex]\lambda=331.7nm[/tex]

Hence,

            The wavelength, in nanometers, of the light source;

                             λ = 331.7 nm

(d) The slit width,

                           [tex]d =\frac{D\lambda}{\beta }[/tex]

                           [tex]d=\frac{400*10^{-9} *2.05}{0.04}[/tex]

                           [tex]d=20.5 \mu m[/tex]

Hence,

           The slit width, in micrometers;

                                   d = 20.5 µm

Learn more about Diffraction here

https://brainly.com/question/16749356                            

#SPJ4

The unit of G is found out to be m³/kg * s².

The force of gravitational attraction is represented by the equation.

F = (G m₁ m₂)/r²

where,

F is the magnitude of the gravitational attraction on either body

m₁ and m₂ are the masses of the bodies,

r is the distance between them

G is the gravitational constant

We need to find the unit of G,

G = (F * r²)/(m₁ m₂)

Let us place the units for the above formula,

G = (N * m²)/kg²

N = kg m/s²

G = (kg * m * m²)/ kg² * s²

G = m³/kg * s²

Thus, the correct option is m³/kg * s².

The question is incomplete. The complete question is 'Gravity causes objects to be attracted to one another. This attraction keeps our feet firmly planted on the ground and causes the moon to orbit the earth. The force of gravitational attraction is represented by the equation.

F= Gm1 m2 /r^2

where F is the magnitude of the gravitational attraction on either body, m1 and m2 are the masses of the bodies, r is the distance between them, and G is the gravitational constant. In Sl units, the units of force are kg m/s^2, the units of mass are kg, and the units of distance are m. For this equation to have consistent units, the units of G must be which of the following?

a. kg^3/ms^2

b. kgs^2/m^3

c. m^3/kgs^2

d. m/kgs^2

To know more about units:

https://brainly.com/question/20984485

#SPJ4

Answer:

decreases

Explanation:

The thermal energy of the gob decreases by heating the air around the gob and the mold in which the bottle is made

The option that explains this observation is option E:

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (or E-field). It can also refer to a system of charged particles' physical field.

Negatively charged electrons will be diverted in the direction of the positive electrode, or (+) plate. Positively charged protons will be diverted in the direction of the negative electrode, or (-) plate.

Therefore, Magnetic lines of force in space are bent by ferromagnetic materials in a static magnetic field. The distortion impact on the static magnetic field is disturbed by the material flaws.

Learn more about electric field from

https://brainly.com/question/14372859

#SPJ1

See full question below

Current Current is moving through a copper ribbon in the direction shown. The ribbon is suspended between the poles of a magnet as indicated. When the voltage is measured between A and B, it is observed that A is at higher potential than B. Which of the following explains this observation?

A The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point A.

B The electrons in the ribbon behave like magnetic dipoles; thus, they align with the magnetic field of the magnet that deflects electrons in the ribbon toward point B.

с Electrons moving through the magnetic field experience a magnetic force to the left that deflects electrons in the ribbon toward point A.

D Electrons moving through the magnetic field experience a magnetic force to the right that deflects electrons in the ribbon toward point B.

E The electric field in the ribbon is distorted by the magnetic field. This distortion creates an electric field component directed from point A to point B that deflects electrons in the ribbon toward point B.

If they collide and remain united then the total momentum of the system is zero.

Total momentum by using the Principle of Momentum Conservation,

m* Va-m* Va=2* Vb

Final speed and total momentum of system = zero

p = 0

Due to the inelastic impact and the same masses and speeds, the system's total kinetic energy is reduced to zero. Before and after a collision, the total kinetic energy are, respectively:

Ka = mv²

Kb = 0

The combination of a particle's mass and velocity produces momentum.

A vector quantity with both magnitude and direction is momentum. Isaac Newton's second equation of motion states that the force applied to a particle is equivalent to the time rate of change of momentum.

Any grouping of particles has a momentum equal to the vector sum of their momenta. A modification in one particle's momentum is perfectly balanced by a modification in the momentum of another particle, according to Newton's third law, which states that particles exert equal and opposite forces on one another.

To know more about momentum:

https://brainly.com/question/29586316

#SPJ4

Field poles are electromagnets whose polarities change as the flow of current alternates in the field windings.

An electromagnet is a sort of magnet wherein the magnetic area is produced with the aid of an electric current. Electromagnets generally encompass cord wounds into a coil. A cutting edge through the wire creates a magnetic discipline that is focused inside the hole in the middle of the coil.

Electromagnets create a magnetic discipline through the application of power. When you introduce the modern, either from a battery or any other supply of strength, it flows through the wire. This creates a magnetic discipline around the coiled cord, magnetizing the metal as though it were a permanent magnet.

Learn more about Electromagnets here:-https://brainly.com/question/1408043

#SPJ4

An electromagnetic wave radiating from a specific 50.0-Hz AC power line has a maximum electric field strength of 13.0 kV/m. This extremely low frequency electromagnetic pulse has a wavelength of 6.00 x [tex]10^{6}[/tex]m.

A sinusoidal graph illustrates electromagnetic waves. It is made up of time-varying electric and magnetic fields that are perpendicular to each other and to the direction that waves travel.

Inverse proportionality describes the relationship between frequency and wavelength. Longer wavelengths are correlated with lower frequency, and vice versa. The fact that a wave's speed is equal to the product of its frequency and wavelength helps to explain how these two properties are related.

Briefing:

Given that,

Frequency of the power line, f = 50.0 Hz

Value of maximum electric field strength of 13.0 kV/m

The wavelength of this very low frequency electromagnetic wave is given by using relation as:

[tex]c = f[/tex]λ

λ [tex]= \frac{c}{f}[/tex]

λ [tex]= \frac{3.8 * 10^{8} m/s }{50}[/tex]

λ = 6 x [tex]10^{6}[/tex] m

To learn more about frequency visit:

brainly.com/question/14316711

#SPJ4

Between 400 nm and 700 nm of the electromagnetic spectrum, vegetation has the strongest response.

The electromagnetic spectrum travels in waves and spans an extensive spectrum from very long radio waves to very brief gamma rays. The human eye can simplest come across only a small portion of this spectrum called visible light.

In order from maximum to lowest power, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible mild, infrared radiation, and radio waves.

In a tumbler, the purple mild travels the fastest, and the violet light travels the slowest of all seven hues. Velocity and wavelength are without delay proportional.

Learn more about Electromagnetic spectrum here:-https://brainly.com/question/23423065

#SPJ4

When two long parallel wires are placed side by side on a horizontal table and the wires carry equal currents in the same direction, the magnetic field at a point midway between the two wires is zero.

When two parallel wires carry current in the same direction, they exert equal and opposite attractive forces on each other. Thus, the net magnetic field at midpoint is zero. While, Two parallel wires carrying current in opposite directions repel and try to move away from each other.

Similarly, if you have two parallel wires with current traveling in opposite directions, as you do in the series circuit, then the magnetic fields of the two wires will be traveling in the same direction at the point at which they intersect, and therefore repel each other.

To know more about Magnetic Field:

https://brainly.com/question/13103888

#SPJ4

Where the exercise here is to name the disorder, note that:

It should be mentioned that medication (such as antidepressants or benzodiazepines) and/or counseling may be used to treat a panic disorder such as cognitive-behavioral therapy.

A suitable course of treatment for dissociative disorders may involve counseling (such as cognitive-behavioral therapy, trauma-focused therapy, or psychodynamic therapy) and/or medication.

The focus of psychodynamic therapy is on unconscious processes as they show in the client's current behavior. Client self-awareness and knowledge of the effect of the past on present behavior are the aims of psychodynamic therapy.

Learn more about Dissociative disorder:
https://brainly.com/question/20430933
#SPJ1

The initial momentum of the girl is conserved with the equal final velocity for both of them . Hence, the momentum of the girl is 60 kg m/s.

Momentum of a moving body is the product of velocity and mass of the body. Momentum is a vector quantity and is characterized by its magnitude and direction. The unit of momentum is Kg m/s.

During collision, the total momentum of a body is conserved. Therefore, total initial momentum of the colliding bodies is equal to the final momentum where they both move in equal velocity.

Here, the boy moves in 2 m/s. The velocity of the girl will be the same.

Hence, her momentum = mass × velocity

= 30 Kg × 2 m/s = 60 Kg m/s.

Therefore, the momentum of the girl is 60 kg m/s.

To find more on momentum, refer here:

https://brainly.com/question/24030570

#SPJ1

Joan is going with speed 30 m/s. Hence, option (C) is correct.

Acceleration is the rate at which a velocity changes over time. It qualifies as a vector quantity because it possesses both direction and magnitude. Meter/second^2 (m/s^2) is the SI unit of acceleration.

Given that: initial speed of the car: u = 10 m/s.

Uniform acceleration of the car: a =  4 m/s^2.

Distance travelled: s = 100 meters.

Let, the final speed is = v

Using the formula v² = u² + 2as, we get:

v = √(10² + 2×4×100) m/s.

= 30 m/s.

Hence, final speed of the car is 30 m/s.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1