Answer:
•cocoons are boiled in hot water for obtaining silk fibres from cocoons.
•camel wool considered a natural health product because it has excellent thermal proities
I forgot to add the answers i had to my question (While a balloon is being filled, if the temperature of the air in the balloon increases, what happens to it’s volume)
A) It stays the same
B) It deflates
C) It decreases
D) It increases
The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .
what is the material used to make plaster of paris?
Answer:
gypsum
Explanation:
gypsum is used to make plaster of Paris
Answer:
Simple squamous epithelium
This type of epithelia lines the inner surface of all blood vessels (endothelium), forms the wall of alveolar sacs in the lung and lines the body cavities (mesothelium). The primary function of simple squamous epithelia is to facilitate diffusion of gases and small molecules.
Explanation:
isme talk kro
(Q014) Silicates a. are classified on the basis of what kind of metals they contain. b. form through the evaporation of water. c. are a large category of minerals that includes the common minerals calcite and dolomite. d. have the silicon-oxygen tetrahedron as their structural unit.
Answer: d. have the silicon-oxygen tetrahedron as their structural unit.
Explanation:
Silicates are anions that have both Oxygen and Silicon as the basis of their structure. These two form a tetrahedron type structure that enable them to be useful for a whole lot of things.
Silicates are very abundant on Earth as they comprise around 95% of the Earth's crust as well as the upper mantle which explains why they are mostly found in igneous rocks.
which energy is found in the nucleus of an atom?
Answer:
Nuclear energy.
Explanation:
It's the energy that holds protons and neutrons ( nucleons ) together, hence holds the nucleus as one.
Ribbon diagrams shows secondary structures and appear less detailed than other model types. In one to two sentences, give a reason the chemists would use ribbon diagrams. What type of information do they provide?
Answer:
They show helixes and proteins
Explanation:
Ribbon diagrams are the Richardson diagrams that represent the protein structures. Chemist prefers using Ribbon diagrams to show the various structure of the proteins.
What are ribbon diagrams?The Ribbon diagram is used to represent the structural organization of the protein in the polypeptide chains or individually. It shows the three-dimensional structure and organization of the protein framework.
The ribbon diagram for the secondary structure of the protein shows the intramolecular and intermolecular structure along with helixes and bonding. It shows the detailed structure of the protein organization including the helix and sheets.
Therefore, the ribbon diagram is used by chemists to determine the structure of the protein as they give the details about the helix and sheet.
Learn more about ribbon diagrams, here:
https://brainly.com/question/2794632
#SPJ2
A compound was found to contain 90.6% lead (Pb) and 9.4% oxygen. What is the empirical formula for this compound?
Answer:
the answer is 47.9 and ik because I just had that question
The empirical formula of the compound is O₄Pb₃.
What is the empirical formula?
An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.
Amount of lead (Pb) = 90.6%
⇒and amount of oxygen = 9.4%
taking the whole number ratio
o = 4
Pb = 3
∴ ⇒O: Pb=4:3
O4Pb3 answer.
Learn more about empirical formula here:-https://brainly.com/question/1603500
#SPJ2
At the beginning of the reaction: N2 + 3H2 -> 2NH there is 1 mol of N. and 3 moles of H, and at the end of it is present a mixture formed by 2.5 moles in total, what is the performance for the reaction?
5.- Al comenzar la reacción: N2+ 3H2 -> 2NH existe 1 mol de N. y 3 moles de H, y al finalizarla está presente una mezcla formada por 2,5 moles en total, ¿cuál es el rendimiento para la reacción?
Answer:
75%
Explanation:
call realistic moles of N2 in the reaction is a
moles of H2 :3a
moles of NH3: 2a
the moles of residual N2 after reaction: 1-a
the moles of residual H2 after react: 3- 3a
the moles of mixture: 2a+1-a+3-3a=2.5
-> a=0.75
H=0.75/1=75%
what is the gram formula of na2co3
Answer:
106 gfm
Explanation:
element. number masses
Na. 2 23×2
C. 1. 12
O. 3. 16×3
then add
106 gfm
during the electrolysis of cryolite ,aluminium and fluorine are formed in.......molar ratio
[tex]{\huge{\boxed{\sf{\pink{☛Answer࿐}}}}}[/tex]
From the first mechanism, it can be seen that the Aluminum is reduced at cathode and Florine is oxidized at anode.The ratio of aluminium and fluorine is the ratio of their change in oxidation number, i.e. 2:3༒HOPE SO IT HELPS YOU༒
༒MARK ME AS BRAINLIEST༒
water and development are substitute of one another.
explanation with it, please
hii pls help me to balance the equation and state the symbols thanksss
Answer:
I hope that the link above will be helpful
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
what do y’all do when y’all brainly says “locked” and won’t show anymore answers !???
Answer:
Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.
full form of soil pH
Answer:
PH STANDS FOR POTENTIAL OF HYDROGEN .
It represents the ratio of Hydronium ions (H3O) to Hydroxide ions (OH). It is a measure of acidity and alkalinity of a solution.
FOLLOW MEWhat exactly is a proton? Is it a member of the periodic table?
The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).
can you solve question 5 and 6 only
Answer:
oil floats on water because it is heavier than water
Salt is no longer visible after stirring as salt dissolves in water
by filtration
What is the AHsol for LiF → Lit + F-? The lattice energy is -1,036 kJ/
mol, the enthalpy of hydration for Lit is -499
kJ/mol, and the enthalpy of hydration for F-is-431 kJ/mol. Use A Hooi = -A Hat + AHhydr.
0-968 kJ/mol
-106 kJ/mol
106 kJ/mol
1,966 kJ/
mol
The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
How many grams of liquid water are produced when 60 grams of ice melt?
Answer: 60 Grams of water are produced, because you can't get more than the amount that was in the original ice cube
Explanation:
what is second explain it briefly
Explanation:
it is that when an object is moving 25 m per sec to calculate its time we can simply divide 1.5 by 25 and multiply by 1
Vitamin C is a water-soluble vitamin, so your body doesn't store it. You have to get the required amount from your diet (citrus fruits are a great source!), or you could take a daily vitamin C supplement pill. Vitamin C is ascorbic acid, so to determine how much vitamin C (acid) has been placed in each pill, you could do an acid-base titration. One vitamin C pill was dissolved in water and titrated to an endpoint by 16.00 mL of a 0.447 M solution of NaOH. How many grams of ascorbic acid were there in the pill? (MW of ascorbic acid is 176.1 /mol). Explain and show your work.
Answer:
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
Explanation:
The mass of ascorbic acid in the pill would be,
1.26 g
Now,
Moles of ascorbic acid = Moles of NaOH = 0.447 M x 16 ml = 7.152 mmol
Mass of ascorbic acid in the pill = 7.152 x 176.1/1000 = 1.26 g
Unknown # 29
Flame Test Color: Green
Addition of HCl(aq): Bubbles
Addition of HCl(aq) and BaCl2(aq): NR (No Reaction)
Addition of HNO3(aq) and AgNO3(aq): White precipitate
What is the unknown ionic compound molecular formula?
Answer:
I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4
I hope this helps
A scientist wants to know: "If salt is added to water, would the
solution still boil at the same temperature?"
torcses
Answer:
no, the sollution will boil at a higher temperature because the density of the sollution will increase when salt is added to it
in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3πx b.6πx c.9x/2 d.x/2
please I need complete explanation fast
Answer:
can you type question properly.
Which of the following is NOT a physical property?
Viscosity
Reactivity
Malleability
Density
Answer:
reactivity is NOT a physical property
I need help!!!! please
6.94 is much more closet to 7.016, so Li 7 is more abundant
what is the reactant(s) in the chemical equation below
3CO(g) + Fe2O3(s) 2Fe(s) + 3CO2(g)
Answer:
the reactants are carbon dioxide ,iron, oxygen
3g of clean mg ribbon and 8g of clean copper metal was burnt separately in equal volume of air and both mass reacted completely with air state and explain where they was greater change in mass??
Answer:
gshshs
Explanation:
bshsjskskehhshs
The copper metal is heated in the air. The magnesium ribbon emits a brilliant light and magnesium oxide, which is white. When oxygen is passed over copper (in the presence of heat), an oxidation reaction occurs, resulting in the formation of black copper oxide. The greater change in mass observed when they start to burned.
What is copper metal ?Copper is a mineral and an element that is essential to our daily lives. It is a significant industrial metal due to its high ductility, malleability, thermal and electrical conductivity, and corrosion resistance. It is a necessary nutrient in our diet.
Metals are a class of materials that have high electrical and thermal conductivity, as well as malleability, ductility, and high light reflection. Copper (Cu), aluminium (Al), and other metals are examples.
The combustion of magnesium ribbon is a combined reaction. This is due to the fact that magnesium reacts with oxygen to form the single product magnesium oxide. When magnesium ribbon is burned in air, it reacts with the oxygen in the air to form magnesium oxide.
Thus, 3g of clean mg ribbon and 8g of clean copper metal were burnt separately in equal volume of air and both mass reacted completely with air the greater change in mass observed when they start to burned.
To learn more about copper metal, follow the link;
https://brainly.com/question/11992235
#SPJ2
The reactivity of elements can be predicted based on the position of an element in the periodic table. Based on the periodic table, which of the following elements would be expected to be the most reactive?
Iodine (I)
Iodine (I)
Chlorine (Cl)
Chlorine (Cl)
Fluorine (F)
Fluorine (F)
Bromine (Br)
Answer:
Chlorine (Cl) is most reactive out the the listed elements.
Answer:
iodine
Explanation:
It is the most reactive on the periodic table.
Give the relation of energy (E) and frequency (v) as given by Planck. Calculate the frequency and energy of a photon of radiation having wavelength 3000°A.
Pls answer correctly,need it urgently...
Solution:-1
[tex]\\ \sf\longmapsto E=hv[/tex]
E denotes to Energy h denotes to planks constantv denotes to frequency.Solution:-2
Wavelength=3000Å[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]
[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]
[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]
Now
[tex]\\ \sf\longmapsto E=hv[/tex]
[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]
[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]
A chemist determines by measurements that 0.0550 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Be sure your answer has the correct number of significant digits.
The mass of nitrogen gas that participated in the chemical reaction is 1.54g
HOW TO CALCULATE MASS OF AN ELEMENT:
Mass of a substance can be calculated by multiplying the number of moles in mol of the substance by its molecular mass in g/mol. That is;mass (M) = molar mass (MM) × number of moles (n)According to this question, a chemist determines by measurements that 0.0550 moles of nitrogen gas (N2) participate in a chemical reaction.
The molecular mass of nitrogen gas (N2) = 14.01(2)= 28.02g/mol
Hence, the mass of the nitrogen gas that participated in the chemical reaction is calculated as follows:
Mass (g) = 0.0550 mol × 28.02 g/molMass = 1.5411Therefore, the mass of nitrogen gas that participated in the chemical reaction is 1.54g
Learn more: https://brainly.com/question/18269198
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
