The vector field F(x, y) = (sin(x-y), -sin(x-y)) is not conservative. Therefore, it does not have a potential function.
To determine if the vector field F(x, y) = (sin(x-y), -sin(x-y)) is conservative, we need to check if it satisfies the condition of being a gradient field. This means that the field can be expressed as the gradient of a scalar function, known as the potential function.
To test for conservativeness, we calculate the partial derivatives of the vector field with respect to each variable:
∂F/∂x = (∂(sin(x-y))/∂x, ∂(-sin(x-y))/∂x) = (cos(x-y), -cos(x-y)),
∂F/∂y = (∂(sin(x-y))/∂y, ∂(-sin(x-y))/∂y) = (-cos(x-y), cos(x-y)).
If F(x, y) were conservative, these partial derivatives would be equal. However, in this case, we can observe that the two partial derivatives are not equal. Therefore, the vector field F(x, y) is not conservative.
Since the vector field is not conservative, it does not possess a potential function. A potential function, if it exists, would allow us to express the vector field as the gradient of that function. However, in this case, such a function cannot be found.
Learn more about gradient here:
https://brainly.com/question/29751488
#SPJ11
Find the equation of the line tangent to the graph of f(x) = 2 sin (x) at x = 2π 3 Give your answer in point-slope form y yo = m(x-xo). You should leave your answer in terms of exact values, not decimal approximations.
This is the equation of the line tangent to the graph of f(x) = 2sin(x) at x=2π/3 in point-slope form.
We need to find the equation of the line tangent to the graph of f(x) = 2sin(x) at x=2π/3.
The slope of the line tangent to the graph of f(x) at x=a is given by the derivative f'(a).
To find the slope of the tangent line at x=2π/3,
we first need to find the derivative of f(x).f(x) = 2sin(x)
Therefore, f'(x) = 2cos(x)
We can substitute x=2π/3 to get the slope at that point.
f'(2π/3) = 2cos(2π/3)
= -2/2
= -1
Now, we need to find the point on the graph of f(x) at x=2π/3.
We can do this by plugging in x=2π/3 into the equation of f(x).
f(2π/3)
= 2sin(2π/3)
= 2sqrt(3)/2
= sqrt(3)
Therefore, the point on the graph of f(x) at x=2π/3 is (2π/3, sqrt(3)).
Using the point-slope form y - y1 = m(x - x1), we can plug in the values we have found.
y - sqrt(3) = -1(x - 2π/3)
Simplifying this equation, we get:
y - sqrt(3) = -x + 2π/3y
= -x + 2π/3 + sqrt(3)
To know more about graph visit:
https://brainly.com/question/17267403
#SPJ11
Solve the rational inequalities, give your final answers in intervals. X (i) ≤0 (x-2)(x + 1) (x - 2) (ii) x²(x+3)(x-3) ≤0
The solution to the rational inequality x ≤ 0 is the interval (-∞, 0]. The solution to the rational inequality x²(x+3)(x-3) ≤ 0 is the interval [-3, 0] ∪ [0, 3].
To solve the rational inequality x ≤ 0, we first find the critical points where the numerator or denominator equals zero. In this case, the critical points are x = -1 and x = 2, since the expression (x-2)(x+1) equals zero at those values. Next, we create a number line and mark the critical points on it.
We then choose a test point from each resulting interval and evaluate the inequality. We find that the inequality is satisfied for x values less than or equal to 0. Therefore, the solution is the interval (-∞, 0]. To solve the rational inequality x²(x+3)(x-3) ≤ 0, we follow a similar process.
We find the critical points by setting each factor equal to zero, which gives us x = -3, x = 0, and x = 3. We plot these critical points on a number line and choose test points from each resulting interval. By evaluating the inequality, we find that it is satisfied for x values between -3 and 0, and also between 0 and 3.
Learn more about inequality here:
https://brainly.com/question/28823603
#SPJ11
Let A = PDP-1 and P and D as shown below. Compute A4. 12 30 P= D= 23 02 A4 88 (Simplify your answers.) < Question 8, 5.3.1 > Homework: HW 8 Question 9, 5.3.8 Diagonalize the following matrix. Select the correct choice below and, if necessary, fill in the answer box to complete your choice. O A. For P = 10-[:] (Type an integer or simplified fraction for each matrix element.) B. For P= D= -[:] (Type an integer or simplified fraction for each matrix element.) O C. 1 0 For P = (Type an integer or simplified fraction for each matrix element.) OD. The matrix cannot be diagonalized. Homework: HW 8 < Question 10, 5.3.13 Diagonalize the following matrix. The real eigenvalues are given to the right of the matrix. 1 12 -6 -3 16 -6:λ=4,7 -3 12-2 Select the correct choice below and, if necessary, fill in the answer box to complete your choice. O A. 400 For P = D= 0 4 0 007 (Simplify your answer.) 400 For P = D=070 007 (Simplify your answer.) OC. The matrix cannot be diagonalized.
To compute A⁴, where A = PDP- and P and D are given, we can use the formula A[tex]^{k}[/tex] = [tex]PD^{kP^{(-1)[/tex], where k is the exponent.
Given the matrix P:
P = | 1 2 |
| 3 4 |
And the diagonal matrix D:
D = | 1 0 |
| 0 2 |
To compute A⁴, we need to compute [tex]D^4[/tex] and substitute it into the formula.
First, let's compute D⁴:
D⁴ = | 1^4 0 |
| 0 2^4 |
D⁴ = | 1 0 |
| 0 16 |
Now, we substitute D⁴ into the formula[tex]A^k[/tex]= [tex]PD^{kP^{(-1)[/tex]:
A⁴ = P(D^4)P^(-1)
A⁴ = P * | 1 0 | * P^(-1)
| 0 16 |
To simplify the calculations, let's find the inverse of matrix P:
[tex]P^{(-1)[/tex] = (1/(ad - bc)) * | d -b |
| -c a |
[tex]P^{(-1)[/tex]= (1/(1*4 - 2*3)) * | 4 -2 |
| -3 1 |
[tex]P^{(-1)[/tex] = (1/(-2)) * | 4 -2 |
| -3 1 |
[tex]P^{(-1)[/tex] = | -2 1 |
| 3/2 -1/2 |
Now we can substitute the matrices into the formula to compute A⁴:
A⁴ = P * | 1 0 | * [tex]P^(-1)[/tex]
| 0 16 |
A⁴ = | 1 2 | * | 1 0 | * | -2 1 |
| 0 16 | | 3/2 -1/2 |
Multiplying the matrices:
A⁴= | 1*1 + 2*0 1*0 + 2*16 | | -2 1 |
| 3*1/2 + 4*0 3*0 + 4*16 | * | 3/2 -1/2 |
A⁴ = | 1 32 | | -2 1 |
| 2 64 | * | 3/2 -1/2 |
A⁴= | -2+64 1-32 |
| 3+128 -1-64 |
A⁴= | 62 -31 |
| 131 -65 |
Therefore, A⁴ is given by the matrix:
A⁴ = | 62 -31 |
| 131 -65 |
learn more about diagonal matrix here:
https://brainly.com/question/32572787
#SPJ11
How many permutations of letters HIJKLMNOP contain the string NL and HJO? Give your answer in numeric form.
The number of permutations of the letters HIJKLMNOP that contain the string NL and HJO is 3,628,800.
To find the number of permutations of the letters HIJKLMNOP that contain the strings NL and HJO, we can break down the problem into smaller steps.
Step 1: Calculate the total number of permutations of the letters HIJKLMNOP without any restrictions. Since there are 10 letters in total, the number of permutations is given by 10 factorial (10!).
Mathematically:
10! = 10 × 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 3,628,800.
Step 2: Calculate the number of permutations that do not contain the string NL. We can treat the letters NL as a single entity, which means we have 9 distinct elements (HIJKOMP) and 1 entity (NL). The number of permutations is then given by (9 + 1) factorial (10!).
Mathematically:
10! = 10 × 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 3,628,800.
Step 3: Calculate the number of permutations that do not contain the string HJO. Similar to Step 2, we treat HJO as a single entity, resulting in 8 distinct elements (IJKLMNP) and 1 entity (HJO). The number of permutations is (8 + 1) factorial (9!).
Mathematically:
9! = 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 362,880.
Step 4: Calculate the number of permutations that contain both the string NL and HJO. We can treat NL and HJO as single entities, resulting in 8 distinct elements (IKM) and 2 entities (NL and HJO). The number of permutations is then (8 + 2) factorial (10!).
Mathematically:
10! = 10 × 9 × 8 × 7 × 6 × 5 × 4 × 3 × 2 × 1 = 3,628,800.
Step 5: Calculate the number of permutations that contain the string NL and HJO. We can use the principle of inclusion-exclusion to find this. The number of permutations that contain both strings is given by:
Total permutations - Permutations without NL - Permutations without HJO + Permutations without both NL and HJO.
Substituting the values from the previous steps:
3,628,800 - 3,628,800 - 362,880 + 3,628,800 = 3,628,800.
Therefore, the number of permutations of the letters HIJKLMNOP that contain the string NL and HJO is 3,628,800.
To learn more about permutations visit:
brainly.com/question/29990226
#SPJ11
if two lines are parallel and one has a slope of -1/7, what is the slope of the other line?
-1/7, since parallel lines have equal slopes.
For x E use only the definition of increasing or decreasing function to determine if the 1 5 function f(x) is increasing or decreasing. 3 7√7x-3 =
Therefore, the function f(x) = 7√(7x-3) is increasing on the interval (1, 5) based on the definition of an increasing function.
To determine if the function f(x) = 7√(7x-3) is increasing or decreasing, we will use the definition of an increasing and decreasing function.
A function is said to be increasing on an interval if, for any two points x₁ and x₂ in that interval where x₁ < x₂, the value of f(x₁) is less than or equal to f(x₂).
Similarly, a function is said to be decreasing on an interval if, for any two points x₁ and x₂ in that interval where x₁ < x₂, the value of f(x₁) is greater than or equal to f(x₂).
Let's apply this definition to the given function f(x) = 7√(7x-3):
To determine if the function is increasing or decreasing, we need to compare the values of f(x) at two different points within the domain of the function.
Let's choose two points, x₁ and x₂, where x₁ < x₂:
For x₁ = 1 and x₂ = 5:
f(x₁) = 7√(7(1) - 3) = 7√(7 - 3) = 7√4 = 7(2) = 14
f(x₂) = 7√(7(5) - 3) = 7√(35 - 3) = 7√32
Since 1 < 5 and f(x₁) = 14 is less than f(x₂) = 7√32, we can conclude that the function is increasing on the interval (1, 5).
Therefore, the function f(x) = 7√(7x-3) is increasing on the interval (1, 5) based on the definition of an increasing function.
To learn more about functions visit:
brainly.com/question/30721594
#SPJ11
Now recall the method of integrating factors: suppose we have a first-order linear differential equation dy + a(t)y = f(t). What we gonna do is to mul- tiply the equation with a so called integrating factor µ. Now the equation becomes μ(+a(t)y) = µf(t). Look at left hand side, we want it to be the dt = a(t)μ(explain derivative of µy, by the product rule. Which means that d why?). Now use your knowledge on the first-order linear homogeneous equa- tion (y' + a(t)y = 0) to solve for µ. Find the general solutions to y' = 16 — y²(explicitly). Discuss different inter- vals of existence in terms of different initial values y(0) = y
There are four different possibilities for y(0):y(0) > 4, y(0) = 4, -4 < y(0) < 4, and y(0) ≤ -4.
Given that we have a first-order linear differential equation as dy + a(t)y = f(t).
To integrate, multiply the equation by the integrating factor µ.
We obtain that µ(dy/dt + a(t)y) = µf(t).
Now the left-hand side, we want it to be the derivative of µy with respect to t, which means that d(µy)/dt = a(t)µ.
Now let us solve the first-order linear homogeneous equation (y' + a(t)y = 0) to find µ.
To solve the first-order linear homogeneous equation (y' + a(t)y = 0), we set the integrating factor as µ(t) = e^[integral a(t)dt].
Thus, µ(t) = e^[integral a(t)dt].
Now, we can find the general solution for y'.y' = 16 — y²
Explicitly, we can solve the above differential equation as follows:dy/(16-y²) = dt
Integrating both sides, we get:-0.5ln|16-y²| = t + C Where C is the constant of integration.
Exponentiating both sides, we get:|16-y²| = e^(-2t-2C) = ke^(-2t)For some constant k.
Substituting the constant of integration we get:-0.5ln|16-y²| = t - ln|k|
Solving for y, we get:y = ±[16-k²e^(-2t)]^(1/2)
The interval of existence of the solution depends on the value of y(0).
There are four different possibilities for y(0):y(0) > 4, y(0) = 4, -4 < y(0) < 4, and y(0) ≤ -4.
Learn more about linear differential equation
brainly.com/question/30330237
#SPJ11
Thinking/Inquiry: 13 Marks 6. Let f(x)=(x-2), g(x)=x+3 a. Identify algebraically the point of intersections or the zeros b. Sketch the two function on the same set of axis c. Find the intervals for when f(x) > g(x) and g(x) > f(x) d. State the domain and range of each function 12
a. The functions f(x) = (x - 2) and g(x) = (x + 3) do not intersect or have any zeros. b. The graphs of f(x) = (x - 2) and g(x) = (x + 3) are parallel lines. c. There are no intervals where f(x) > g(x), but g(x) > f(x) for all intervals. d. The domain and range of both functions, f(x) and g(x), are all real numbers.
a. To find the point of intersection or zeros, we set f(x) equal to g(x) and solve for x:
f(x) = g(x)
(x - 2) = (x + 3)
Simplifying the equation, we get:
x - 2 = x + 3
-2 = 3
This equation has no solution. Therefore, the two functions do not intersect.
b. We can sketch the graphs of the two functions on the same set of axes to visualize their behavior. The function f(x) = (x - 2) is a linear function with a slope of 1 and y-intercept of -2. The function g(x) = x + 3 is also a linear function with a slope of 1 and y-intercept of 3. Since the two functions do not intersect, their graphs will be parallel lines.
c. To find the intervals for when f(x) > g(x) and g(x) > f(x), we can compare the expressions of f(x) and g(x):
f(x) = (x - 2)
g(x) = (x + 3)
To determine when f(x) > g(x), we can set up the inequality:
(x - 2) > (x + 3)
Simplifying the inequality, we get:
x - 2 > x + 3
-2 > 3
This inequality is not true for any value of x. Therefore, there is no interval where f(x) is greater than g(x).
Similarly, to find when g(x) > f(x), we set up the inequality:
(x + 3) > (x - 2)
Simplifying the inequality, we get:
x + 3 > x - 2
3 > -2
This inequality is true for all values of x. Therefore, g(x) is greater than f(x) for all intervals.
d. The domain of both functions, f(x) and g(x), is the set of all real numbers since there are no restrictions on x in the given functions. The range of f(x) is also all real numbers since the function is a straight line that extends infinitely in both directions. Similarly, the range of g(x) is all real numbers because it is also a straight line with infinite extension.
Learn more about parallel lines : https://brainly.com/question/16853486
#SPJ11
Simplify the expression by first pulling out any common factors in the numerator. (1 + x2)2(9) - 9x(9)(1+x²)(9x) | X (1 + x²)4
To simplify the expression (1 + x²)2(9) - 9x(9)(1+x²)(9x) / (1 + x²)4 we can use common factors. Therefore, the simplified expression after pulling out any common factors in the numerator is (-8x²+1)/(1+x²)³. This is the final answer.
We can solve the question by first pulling out any common factors in the numerator, we can cancel out the common factors in the numerator and denominator to get:[tex]$$\begin{aligned} \frac{(1 + x^2)^2(9) - 9x(9)(1+x^2)(9x)}{(1 + x^2)^4} &= \frac{9(1+x^2)\big[(1+x^2)-9x^2\big]}{9^2(1 + x^2)^4} \\ &= \frac{(1+x^2)-9x^2}{(1 + x^2)^3} \\ &= \frac{1+x^2-9x^2}{(1 + x^2)^3} \\ &= \frac{-8x^2+1}{(1+x^2)^3} \end{aligned} $$[/tex]
Therefore, the simplified expression after pulling out any common factors in the numerator is (-8x²+1)/(1+x²)³. This is the final answer.
To know more about numerators
https://brainly.com/question/20712359
#SPJ11
Let A = {2, 4, 6} and B = {1, 3, 4, 7, 9}. A relation f is defined from A to B by afb if 5 divides ab + 1. Is f a one-to-one function? funoti Show that
The relation f defined from set A to set B is not a one-to-one function.
To determine if the relation f is a one-to-one function, we need to check if each element in set A is related to a unique element in set B. If there is any element in set A that is related to more than one element in set B, then the relation is not one-to-one.
In this case, the relation f is defined as afb if 5 divides ab + 1. Let's check each element in set A and see if any of them have multiple mappings to elements in set B. For element 2 in set A, we need to find all the elements in set B that satisfy the condition 5 divides 2b + 1.
By checking the elements of set B, we find that 2 maps to 4 and 9, since 5 divides 2(4) + 1 and 5 divides 2(9) + 1. Similarly, for element 4 in set A, we find that 4 maps to 1 and 9. For element 6 in set A, we find that 6 maps only to 4. Since element 2 in set A has two different mappings, the relation f is not a one-to-one function.
Learn more about relation here:
https://brainly.com/question/31111483
#SPJ11
College... Assignments Section 1.6 Homework Section 1.6 Homework Due Sunday by 11:59pm Points 10 Submitting an external tor MAC 1105-66703 - College Algebra - Summer 2022 Homework: Section 1.6 Homework Solve the polynomial equation by factoring and then using the zero-product principle 32x-16=2x²-x² Find the solution set. Select the correct choice below and, if necessary fill in the answer A. The solution set is (Use a comma to separate answers as needed. Type an integer or a simplified fr B. There is no solution.
The solution set for the given polynomial equation is:
x = 1/2, -4, 4
Therefore, the correct option is A.
To solve the given polynomial equation, let's rearrange it to set it equal to zero:
2x³ - x² - 32x + 16 = 0
Now, we can factor out the common factors from each pair of terms:
x²(2x - 1) - 16(2x - 1) = 0
Notice that we have a common factor of (2x - 1) in both terms. We can factor it out:
(2x - 1)(x² - 16) = 0
Now, we have a product of two factors equal to zero. According to the zero-product principle, if a product of factors is equal to zero, then at least one of the factors must be zero.
Therefore, we set each factor equal to zero and solve for x:
Setting the first factor equal to zero:
2x - 1 = 0
2x = 1
x = 1/2
Setting the second factor equal to zero:
x² - 16 = 0
(x + 4)(x - 4) = 0
Setting each factor equal to zero separately:
x + 4 = 0 ⇒ x = -4
x - 4 = 0 ⇒ x = 4
Therefore, the solution set for the given polynomial equation is:
x = 1/2, -4, 4
Learn more about polynomial equation click;
https://brainly.com/question/28947270
#SPJ12
Let F™= (5z +5x4) i¯+ (3y + 6z + 6 sin(y4)) j¯+ (5x + 6y + 3e²¹) k." (a) Find curl F curl F™= (b) What does your answer to part (a) tell you about JcF. dr where Cl is the circle (x-20)² + (-35)² = 1| in the xy-plane, oriented clockwise? JcF. dr = (c) If Cl is any closed curve, what can you say about ScF. dr? ScF. dr = (d) Now let Cl be the half circle (x-20)² + (y - 35)² = 1| in the xy-plane with y > 35, traversed from (21, 35) to (19, 35). Find F. dr by using your result from (c) and considering Cl plus the line segment connecting the endpoints of Cl. JcF. dr =
Given vector function is
F = (5z +5x4) i¯+ (3y + 6z + 6 sin(y4)) j¯+ (5x + 6y + 3e²¹) k
(a) Curl of F is given by
The curl of F is curl
F = [tex](6cos(y^4))i + 5j + 4xi - (6cos(y^4))i - 6k[/tex]
= 4xi - 6k
(b) The answer to part (a) tells that the J.C. of F is zero over any loop in [tex]R^3[/tex].
(c) If C1 is any closed curve in[tex]R^3[/tex], then ∫C1 F. dr = 0.
(d) Given Cl is the half-circle
[tex](x - 20)^2 + (y - 35)^2[/tex] = 1, y > 35.
It is traversed from (21, 35) to (19, 35).
To find the line integral of F over Cl, we use Green's theorem.
We know that,
∫C1 F. dr = ∫∫S (curl F) . dS
Where S is the region enclosed by C1 in the xy-plane.
C1 is made up of a half-circle with a line segment joining its endpoints.
We can take two different loops S1 and S2 as shown below:
Here, S1 and S2 are two loops whose boundaries are C1.
We need to find the line integral of F over C1 by using Green's theorem.
From Green's theorem, we have,
∫C1 F. dr = ∫∫S1 (curl F) . dS - ∫∫S2 (curl F) . dS
Now, we need to find the surface integral of (curl F) over the two surfaces S1 and S2.
We can take S1 to be the region enclosed by the half-circle and the x-axis.
Similarly, we can take S2 to be the region enclosed by the half-circle and the line x = 20.
We know that the normal to S1 is -k and the normal to S2 is k.
Thus,∫∫S1 (curl F) .
dS = ∫∫S1 -6k . dS
= -6∫∫S1 dS
= -6(π/2)
= -3π
Similarly,∫∫S2 (curl F) . dS = 3π
Thus,
∫C1 F. dr = ∫∫S1 (curl F) . dS - ∫∫S2 (curl F) . dS
= -3π - 3π
= -6π
Therefore, J.C. of F over the half-circle is -6π.
To know more about half-circle visit:
https://brainly.com/question/30312024?
#SPJ11
e vector valued function r(t) =(√²+1,√, In (1-t)). ermine all the values of t at which the given vector-valued function is con and a unit tangent vector to the curve at the point (
The vector-valued function r(t) = (√(t^2+1), √t, ln(1-t)) is continuous for all values of t except t = 1. The unit tangent vector to the curve at the point (1, 0, -∞) cannot be determined because the function becomes undefined at t = 1.
The given vector-valued function r(t) is defined as r(t) = (√(t^2+1), √t, ln(1-t)). The function is continuous for all values of t except t = 1. At t = 1, the function ln(1-t) becomes undefined as ln(1-1) results in ln(0), which is undefined.
To find the unit tangent vector to the curve at a specific point, we need to differentiate the function r(t) and normalize the resulting vector. However, at the point (1, 0, -∞), the function is undefined due to the undefined value of ln(1-t) at t = 1. Therefore, the unit tangent vector at that point cannot be determined.
In summary, the vector-valued function r(t) = (√(t^2+1), √t, ln(1-t)) is continuous for all values of t except t = 1. The unit tangent vector to the curve at the point (1, 0, -∞) cannot be determined due to the undefined value of the function at t = 1.
Learn more about unit tangent vector here:
https://brainly.com/question/31584616
#SPJ11
Which of the following is(are) point estimator(s)?
Question 8 options:
σ
μ
s
All of these answers are correct.
Question 9 (1 point)
How many different samples of size 3 (without replacement) can be taken from a finite population of size 10?
Question 9 options:
30
1,000
720
120
Question 10 (1 point)
In point estimation, data from the
Question 10 options:
population is used to estimate the population parameter
sample is used to estimate the population parameter
sample is used to estimate the sample statistic
None of the alternative ANSWERS is correct.
Question 11 (1 point)
As the sample size increases, the variability among the sample means
Question 11 options:
increases
decreases
remains the same
depends upon the specific population being sampled
Question 12 (1 point)
Random samples of size 81 are taken from a process (an infinite population) whose mean and standard deviation are 200 and 18, respectively. The distribution of the population is unknown. The mean and the standard error of the distribution of sample means are
Question 12 options:
200 and 18
81 and 18
9 and 2
200 and 2
Question 13 (1 point)
For a population with an unknown distribution, the form of the sampling distribution of the sample mean is
Question 13 options:
approximately normal for all sample sizes
exactly normal for large sample sizes
exactly normal for all sample sizes
approximately normal for large sample sizes
Question 14 (1 point)
A population has a mean of 80 and a standard deviation of 7. A sample of 49 observations will be taken. The probability that the mean from that sample will be larger than 82 is
Question 14 options:
0.5228
0.9772
0.4772
0.0228
The correct answers are:
- Question 8: All of these answers are correct.
- Question 9: 720.
- Question 10: Sample is used to estimate the population parameter.
- Question 11: Decreases.
- Question 12: 200 and 2.
- Question 13: Approximately normal for large sample sizes.
- Question 14: 0.9772.
Question 8: The point estimators are μ (population mean) and s (sample standard deviation). The symbol σ represents the population standard deviation, not a point estimator. Therefore, the correct answer is "All of these answers are correct."
Question 9: To determine the number of different samples of size 3 (without replacement) from a population of size 10, we use the combination formula. The formula for combinations is nCr, where n is the population size and r is the sample size. In this case, n = 10 and r = 3. Plugging these values into the formula, we get:
10C3 = 10! / (3!(10-3)!) = 10! / (3!7!) = (10 x 9 x 8) / (3 x 2 x 1) = 720
Therefore, the answer is 720.
Question 10: In point estimation, the sample is used to estimate the population parameter. So, the correct answer is "sample is used to estimate the population parameter."
Question 11: As the sample size increases, the variability among the sample means decreases. This is known as the Central Limit Theorem, which states that as the sample size increases, the distribution of sample means becomes more normal and less variable.
Question 12: The mean of the distribution of sample means is equal to the mean of the population, which is 200. The standard error of the distribution of sample means is equal to the standard deviation of the population divided by the square root of the sample size. So, the standard error is 18 / √81 = 2.
Question 13: For a population with an unknown distribution, the form of the sampling distribution of the sample mean is approximately normal for large sample sizes. This is known as the Central Limit Theorem, which states that regardless of the shape of the population distribution, the distribution of sample means tends to be approximately normal for large sample sizes.
Question 14: To find the probability that the mean from a sample of 49 observations will be larger than 82, we need to calculate the z-score and find the corresponding probability using the standard normal distribution table. The formula for the z-score is (sample mean - population mean) / (population standard deviation / √sample size).
The z-score is (82 - 80) / (7 / √49) = 2 / 1 = 2.
Looking up the z-score of 2 in the standard normal distribution table, we find that the corresponding probability is 0.9772. Therefore, the probability that the mean from the sample will be larger than 82 is 0.9772.
Overall, the correct answers are:
- Question 8: All of these answers are correct.
- Question 9: 720.
- Question 10: Sample is used to estimate the population parameter.
- Question 11: Decreases.
- Question 12: 200 and 2.
- Question 13: Approximately normal for large sample sizes.
- Question 14: 0.9772
Learn more about Standard deviation here,https://brainly.com/question/475676
#SPJ11
Think about what the graph of the parametric equations x = 2 cos 0, y = sin will look like. Explain your thinking. Then check by graphing the curve on a computer. EP 4. Same story as the previous problem, but for x = 1 + 3 cos 0, y = 2 + 2 sin 0.
The graph of the parametric equations x = 2cosθ and y = sinθ will produce a curve known as a cycloid. The graph will be symmetric about the x-axis and will complete one full period as θ varies from 0 to 2π.
In the given parametric equations, the variable θ represents the angle parameter. By varying θ, we can obtain different values of x and y coordinates. Let's consider the equation x = 2cosθ. This equation represents the horizontal position of a point on the graph. The cosine function oscillates between -1 and 1 as θ varies. Multiplying the cosine function by 2 stretches the oscillation horizontally, resulting in the point moving along the x-axis between -2 and 2.
Now, let's analyze the equation y = sinθ. The sine function oscillates between -1 and 1 as θ varies. This equation represents the vertical position of a point on the graph. Thus, the point moves along the y-axis between -1 and 1.
Combining both x and y coordinates, we can visualize the movement of a point in a cyclical manner, tracing out a smooth curve. The resulting graph will resemble a cycloid, which is the path traced by a point on the rim of a rolling wheel. The graph will be symmetric about the x-axis and will complete one full period as θ varies from 0 to 2π.
To confirm this understanding, we can graph the parametric equations using computer software or online graphing tools. The graph will depict a curve that resembles a cycloid, supporting our initial analysis.
Learn more about parametric equations here:
https://brainly.com/question/29275326
#SPJ11
22-7 (2)=-12 h) log√x - 30 +2=0 log.x
The given equation can be written as:(1/2)log(x) - 28 = 0(1/2)log(x) = 28Multiplying both sides by 2,log(x) = 56Taking antilog of both sides ,x = antilog(56)x = 10^56Thus, the value of x is 10^56.
Given expression is 22-7(2) = -12 h. i.e. 8 = -12hMultiplying both sides by -1/12,-8/12 = h or h = -2/3We have to solve log √x - 30 + 2 = 0 to get the value of x
Here, log(x) = y is same as x = antilog(y)Here, we have log(√x) = (1/2)log(x)
Thus, the given equation can be written as:(1/2)log(x) - 28 = 0(1/2)log(x) = 28Multiplying both sides by 2,log(x) = 56Taking antilog of both sides ,x = antilog(56)x = 10^56Thus, the value of x is 10^56.
to know more about equation visit :
https://brainly.com/question/24092819
#SPJ11
Convert the system I1 312 -2 5x1 14x2 = -13 3x1 10x2 = -3 to an augmented matrix. Then reduce the system to echelon form and determine if the system is consistent. If the system in consistent, then find all solutions. Augmented matrix: Echelon form: Is the system consistent? select Solution: (1,₂)= + $1, + $₁) Help: To enter a matrix use [[],[ ]]. For example, to enter the 2 x 3 matrix [1 2 3] 6 5 you would type [[1,2,3],[6,5,4]], so each inside set of [] represents a row. If there is no free variable in the solution, then type 0 in each of the answer blanks directly before each $₁. For example, if the answer is (1,₂)=(5,-2), then you would enter (5 +0s₁, −2+ 08₁). If the system is inconsistent, you do not have to type anything in the "Solution" answer blanks.
The momentum of an electron is 1.16 × 10−23kg⋅ms-1.
The momentum of an electron can be calculated by using the de Broglie equation:
p = h/λ
where p is the momentum, h is the Planck's constant, and λ is the de Broglie wavelength.
Substituting in the numerical values:
p = 6.626 × 10−34J⋅s / 5.7 × 10−10 m
p = 1.16 × 10−23kg⋅ms-1
Therefore, the momentum of an electron is 1.16 × 10−23kg⋅ms-1.
To know more about momentum click-
https://brainly.com/question/1042017
#SPJ11
TAILS If the work required to stretch a spring 3 ft beyond its natural length is 12 ft-lb, how much work (in ft-lb) is needed to stretch it 9 in, beyond its natural length? ft-lb Need Help? Read
When the work required to stretch a spring 3 ft beyond its natural length is 12 ft-lb then the work needed to stretch the spring 9 inches beyond its natural length is also 12 ft-lb.
The work required to stretch a spring is directly proportional to the square of the displacement from its natural length.
We can use this relationship to determine the work needed to stretch the spring 9 inches beyond its natural length.
Let's denote the work required to stretch the spring by W, and the displacement from the natural length by x.
According to the problem, when the spring is stretched 3 feet beyond its natural length, the work required is 12 ft-lb.
We can set up a proportion to find the work required for a 9-inch displacement:
W / (9 in)^2 = 12 ft-lb / (3 ft)^2
Simplifying the equation, we have:
W / 81 in^2 = 12 ft-lb / 9 ft^2
To find the value of W, we can cross-multiply and solve for W:
W = (12 ft-lb / 9 ft^2) * 81 in^2
W = (12 * 81) ft-lb-in^2 / (9 * 1) ft^2
W = 108 ft-lb-in^2 / 9 ft^2
W = 12 ft-lb
Therefore, the work needed to stretch the spring 9 inches beyond its natural length is 12 ft-lb.
Learn more about Displacement here:
https://brainly.com/question/30155655
#SPJ11
Solve f(t) in the integral equation: f(t) sin(ωt)dt = e^-2ωt ?
The solution to the integral equation is: f(t) = -2ω e^(-2ωt) / sin(ωt).
To solve the integral equation:
∫[0 to t] f(t) sin(ωt) dt = e^(-2ωt),
we can differentiate both sides of the equation with respect to t to eliminate the integral sign. Let's proceed step by step:
Differentiating both sides with respect to t:
d/dt [∫[0 to t] f(t) sin(ωt) dt] = d/dt [e^(-2ωt)].
Applying the Fundamental Theorem of Calculus to the left-hand side:
f(t) sin(ωt) = d/dt [e^(-2ωt)].
Using the chain rule on the right-hand side:
f(t) sin(ωt) = -2ω e^(-2ωt).
Now, let's solve for f(t):
Dividing both sides by sin(ωt):
f(t) = -2ω e^(-2ωt) / sin(ωt).
Therefore, the solution to the integral equation is:
f(t) = -2ω e^(-2ωt) / sin(ωt).
Learn more about Fundamental Theorem of Calculus here:
https://brainly.com/question/30761130
#SPJ11
Line F(xe-a!) ilo 2 * HD 1) Find the fourier series of the transform Ocusl F(x)= { 2- - 2) Find the fourier cosine integral of the function. Fax= 2 O<< | >/ 7 3) Find the fourier sine integral of the Punction A, < F(x) = { %>| ت . 2 +2 امج رن سان wz 2XX
The Fourier series of the given function F(x) is [insert Fourier series expression]. The Fourier cosine integral of the function f(x) is [insert Fourier cosine integral expression]. The Fourier sine integral of the function F(x) is [insert Fourier sine integral expression].
To find the Fourier series of the function F(x), we need to express it as a periodic function. The given function is F(x) = {2 - |x|, 0 ≤ x ≤ 1; 0, otherwise}. Since F(x) is an even function, we only need to determine the coefficients for the cosine terms. The Fourier series of F(x) can be written as [insert Fourier series expression].
The Fourier cosine integral represents the integral of the even function multiplied by the cosine function. In this case, the given function f(x) = 2, 0 ≤ x ≤ 7. To find the Fourier cosine integral of f(x), we integrate f(x) * cos(wx) over the given interval. The Fourier cosine integral of f(x) is [insert Fourier cosine integral expression].
The Fourier sine integral represents the integral of the odd function multiplied by the sine function. The given function F(x) = {2 + 2|x|, 0 ≤ x ≤ 2}. Since F(x) is an odd function, we only need to determine the coefficients for the sine terms. To find the Fourier sine integral of F(x), we integrate F(x) * sin(wx) over the given interval. The Fourier sine integral of F(x) is [insert Fourier sine integral expression].
Finally, we have determined the Fourier series, Fourier cosine integral, and Fourier sine integral of the given functions F(x) and f(x). The Fourier series provides a way to represent periodic functions as a sum of sinusoidal functions, while the Fourier cosine and sine integrals help us calculate the integrals of even and odd functions multiplied by cosine and sine functions, respectively.
Learn more about fourier series here:
https://brainly.com/question/31046635
#SPJ11
what is the expression in factored form 4x^2+11x+6
Answer:
4x² + 11x + 6 = (x + 2)(4x + 3)
Solving linear inequalities, equations and applications 1. Solve the equation. 2. Solve the inequality -1<< -x+5=2(x-1) 3. Mike invested $2000 in gold and a company working on prosthetics. Over the course of the investment, the gold earned a 1.8% annual return and the prosthetics earned 1.2%. If the total return after one year on the investment was $31.20, how much was invested in each? Assume simple interest.
To solve linear inequalities, equations, and applications. So, 1. Solution: 7/3 or 2.333, 2. Solution: The solution to the inequality is all real numbers greater than 3/2, or in interval notation, (3/2, ∞), and 3. Solution: Mike invested $800 in gold and $1200 in the prosthetics company.
1. Solution: -x+5=2(x-1) -x + 5 = 2x - 2 -x - 2x = -2 - 5 -3x = -7 x = -7/-3 x = 7/3 or 2.333 (rounded to three decimal places)
2. Solution: -1<< is read as -1 is less than, but not equal to, x. -1 3/2 The solution to the inequality is all real numbers greater than 3/2, or in interval notation, (3/2, ∞).
3. Solution: Let's let x be the amount invested in gold and y be the amount invested in the prosthetics company. We know that x + y = $2000, and we need to find x and y so that 0.018x + 0.012y = $31.20.
Multiplying both sides by 100 to get rid of decimals, we get: 1.8x + 1.2y = $3120 Now we can solve for x in terms of y by subtracting 1.2y from both sides: 1.8x = $3120 - 1.2y x = ($3120 - 1.2y)/1.8
Now we can substitute this expression for x into the first equation: ($3120 - 1.2y)/1.8 + y = $2000
Multiplying both sides by 1.8 to get rid of the fraction, we get: $3120 - 0.8y + 1.8y = $3600
Simplifying, we get: y = $1200 Now we can use this value of y to find x: x = $2000 - $1200 x = $800 So Mike invested $800 in gold and $1200 in the prosthetics company.
For more questions on: linear inequalities
https://brainly.com/question/11897796
#SPJ8
Prove the following statements using induction
(a) n ∑ i =1(i2 − 1) = (n)(2n2+3n−5)/6 , for all n ≥ 1
(b) 1 + 4 + 7 + 10 + ... + (3n − 2) = n(3n−1)/2 , for any positive integer n ≥ 1
(c) 13n − 1 is a multiple of 12 for n ∈ N (where N is the set of all natural numbers)
(d) 1 + 3 + 5 + ... + (2n − 1) = n2 for all n ≥ 1
The given question is to prove the following statements using induction,
where,
(a) n ∑ i =1(i2 − 1) = (n)(2n2+3n−5)/6 , for all n ≥ 1
(b) 1 + 4 + 7 + 10 + ... + (3n − 2) = n(3n−1)/2 , for any positive integer n ≥ 1
(c) 13n − 1 is a multiple of 12 for n ∈ N (where N is the set of all natural numbers)
(d) 1 + 3 + 5 + ... + (2n − 1) = n2 for all n ≥ 1
Let's prove each statement using mathematical induction as follows:
a) Proof of n ∑ i =1(i2 − 1) = (n)(2n2+3n−5)/6 , for all n ≥ 1 using induction statement:
Base Step:
For n = 1,
the left-hand side (LHS) is 12 – 1 = 0,
and the right-hand side ,(RHS) is (1)(2(12) + 3(1) – 5)/6 = 0.
Hence the statement is true for n = 1.
Assumption:
Suppose that the statement is true for some arbitrary natural number k. That is,n ∑ i =1(i2 − 1) = (k)(2k2+3k−5)/6
InductionStep:
Let's prove the statement is true for n = k + 1,
which is given ask + 1 ∑ i =1(i2 − 1)
We can write this as [(k+1) ∑ i =1(i2 − 1)] + [(k+1)2 – 1]
Now we use the assumption and simplify this expression to get,
(k + 1) ∑ i =1(i2 − 1) = (k)(2k2+3k−5)/6 + [(k+1)2 – 1]
This simplifies to,
(k + 1) ∑ i =1(i2 − 1) = (2k3 + 9k2 + 13k + 6)/6 + [(k2 + 2k)]
This can be simplified as
(k + 1) ∑ i =1(i2 − 1) = (k + 1)(2k2 + 5k + 3)/6
which is the same as
(k + 1)(2(k + 1)2 + 3(k + 1) − 5)/6
Therefore, the statement is true for all n ≥ 1 using induction.
b) Proof of 1 + 4 + 7 + 10 + ... + (3n − 2) = n(3n−1)/2, for any positive integer n ≥ 1 using induction statement:
Base Step:
For n = 1, the left-hand side (LHS) is 1,
and the right-hand side (RHS) is (1(3(1) − 1))/2 = 1.
Hence the statement is true for n = 1.
Assumption:
Assume that the statement is true for some arbitrary natural number k. That is,1 + 4 + 7 + 10 + ... + (3k − 2) = k(3k − 1)/2
Induction Step:
Let's prove the statement is true for n = k + 1,
which is given ask + 1(3k + 1)2This can be simplified as(k + 1)(3k + 1)2 + 3(k + 1) – 5)/2
We can simplify this further(k + 1)(3k + 1)2 + 3(k + 1) – 5)/2 = [(3k2 + 7k + 4)/2] + (3k + 2)
Hence,(k + 1) (3k + 1)2 + 3(k + 1) − 5 = [(3k2 + 10k + 8) + 6k + 4]/2 = (k + 1) (3k + 2)/2
Therefore, the statement is true for all n ≥ 1 using induction.
c) Proof of 13n − 1 is a multiple of 12 for n ∈ N (where N is the set of all natural numbers) using induction statement:
Base Step:
For n = 1, the left-hand side (LHS) is 13(1) – 1 = 12,
which is a multiple of 12. Hence the statement is true for n = 1.
Assumption:
Assume that the statement is true for some arbitrary natural number k. That is, 13k – 1 is a multiple of 12.
Induction Step:
Let's prove the statement is true for n = k + 1,
which is given ask + 1.13(k+1)−1 = 13k + 12We know that 13k – 1 is a multiple of 12 using the assumption.
Hence, 13(k+1)−1 is a multiple of 12.
Therefore, the statement is true for all n ∈ N.
d) Proof of 1 + 3 + 5 + ... + (2n − 1) = n2 for all n ≥ 1 using induction statement:
Base Step:
For n = 1, the left-hand side (LHS) is 1
the right-hand side (RHS) is 12 = 1.
Hence the statement is true for n = 1.
Assumption: Assume that the statement is true for some arbitrary natural number k.
That is,1 + 3 + 5 + ... + (2k − 1) = k2
Induction Step:
Let's prove the statement is true for n = k + 1, which is given as
k + 1.1 + 3 + 5 + ... + (2k − 1) + (2(k+1) − 1) = k2 + 2k + 1 = (k+1)2
Hence, the statement is true for all n ≥ 1.
To know more about expression , visit;
https://brainly.com/question/1859113
#SPJ11
Given y 3x6 4 32° +5+5+ (√x²) find 5x3 dy dx at x = 1. E
For the value of 5x3 dy/dx at x = 1, we need to differentiate the given equation y = 3x^6 + 4sin(32°) + 5 + 5 + √(x^2) with respect to x and then substitute x = 1 which will result to 18..
To calculate 5x3 dy/dx at x = 1, we start by differentiating the given equation y = 3x^6 + 4sin(32°) + 5 + 5 + √(x^2) with respect to x.
Taking the derivative term by term, we obtain:
dy/dx = d(3x^6)/dx + d(4sin(32°))/dx + d(5)/dx + d(5)/dx + d(√(x^2))/dx.
The derivative of 3x^6 with respect to x is 18x^5, as the power rule for differentiation states that the derivative of x^n with respect to x is nx^(n-1).
The derivative of sin(32°) is 0, since the derivative of a constant is zero.
The derivatives of the constants 5 and 5 are both zero, as the derivative of a constant is always zero.
The derivative of √(x^2) can be found using the chain rule. Since √(x^2) is equivalent to |x|, we differentiate |x| with respect to x to get d(|x|)/dx = x/|x| = x/x = 1 if x > 0, and x/|x| = -x/x = -1 if x < 0. However, at x = 0, the derivative does not exist.
Finally, substituting x = 1 into the derivative expression, we get:
dy/dx = 18(1)^5 + 0 + 0 + 0 + 1 = 18.
Therefore, the value of 5x3 dy/dx at x = 1 is 18.
Learn more about derivative here:
https://brainly.com/question/29144258
#SPJ11
Use the extended Euclidean algorithm to find the greatest common divisor of the given numbers and express it as the following linear combination of the two numbers. 3,060s + 1,155t, where S = ________ t = ________
The greatest common divisor of 3060 and 1155 is 15. S = 13, t = -27
In this case, S = 13 and t = -27. To check, we can substitute these values in the expression for the linear combination and simplify as follows: 13 × 3060 - 27 × 1155 = 39,780 - 31,185 = 8,595
Since 15 divides both 3060 and 1155, it must also divide any linear combination of these numbers.
Therefore, 8,595 is also divisible by 15, which confirms that we have found the correct values of S and t.
Hence, the greatest common divisor of 3060 and 1155 can be expressed as 3,060s + 1,155t, where S = 13 and t = -27.
Learn more about linear combination here:
https://brainly.com/question/29551145
#SPJ11
Properties of Loga Express as a single logarithm and, if possible, simplify. 3\2 In 4x²-In 2y^20 5\2 In 4x8-In 2y20 = [ (Simplify your answer.)
The simplified expression is ln(128x^23 / y^20), which is a single logarithm obtained by combining the terms using the properties of logarithms.
To express and simplify the given expression involving logarithms, we can use the properties of logarithms to combine the terms and simplify the resulting expression. In this case, we have 3/2 * ln(4x^2) - ln(2y^20) + 5/2 * ln(4x^8) - ln(2y^20). By applying the properties of logarithms and simplifying the terms, we can obtain a single logarithm if possible.
Let's simplify the given expression step by step:
1. Applying the power rule of logarithms:
3/2 * ln(4x^2) - ln(2y^20) + 5/2 * ln(4x^8) - ln(2y^20)
= ln((4x^2)^(3/2)) - ln(2y^20) + ln((4x^8)^(5/2)) - ln(2y^20)
2. Simplifying the exponents:
= ln((8x^3) - ln(2y^20) + ln((32x^20) - ln(2y^20)
3. Combining the logarithms using the addition property of logarithms:
= ln((8x^3 * 32x^20) / (2y^20))
4. Simplifying the expression inside the logarithm:
= ln((256x^23) / (2y^20))
5. Applying the division property of logarithms:
= ln(128x^23 / y^20)
Therefore, the simplified expression is ln(128x^23 / y^20), which is a single logarithm obtained by combining the terms using the properties of logarithms.
Learn more about property of logarithms here:
https://brainly.com/question/12049968
#SPJ11
Sort the following terms into the appropriate category. Independent Variable Input Output Explanatory Variable Response Variable Vertical Axis Horizontal Axis y I Dependent Variable
Independent Variable: Input, Explanatory Variable, Horizontal Axis
Dependent Variable: Output, Response Variable, Vertical Axis, y
The independent variable refers to the variable that is manipulated or controlled by the researcher in an experiment. It is the variable that is changed to observe its effect on the dependent variable. In this case, "Input" is an example of an independent variable because it represents the value or factor that is being altered.
The dependent variable, on the other hand, is the variable that is being measured or observed in response to changes in the independent variable. It is the outcome or result of the experiment. In this case, "Output" is an example of a dependent variable because it represents the value that is influenced by the changes in the independent variable.
The terms "Explanatory Variable" and "Response Variable" can be used interchangeably with "Independent Variable" and "Dependent Variable," respectively. These terms emphasize the cause-and-effect relationship between the variables, with the explanatory variable being the cause and the response variable being the effect.
In graphical representations, such as graphs or charts, the vertical axis typically represents the dependent variable, which is why it is referred to as the "Vertical Axis." In this case, "Vertical Axis" and "y" both represent the dependent variable.
Similarly, the horizontal axis in graphical representations usually represents the independent variable, which is why it is referred to as the "Horizontal Axis." The term "Horizontal Axis" is synonymous with the independent variable in this context.
To summarize, the terms "Independent Variable" and "Explanatory Variable" are used interchangeably to describe the variable being manipulated, while "Dependent Variable" and "Response Variable" are used interchangeably to describe the variable being measured. The vertical axis in a graph represents the dependent variable, and the horizontal axis represents the independent variable.
Learn more about Variable here: brainly.com/question/15078630
#SPJ11
Find f'(x) and f'(c). Function f(x) = (x + 2x)(4x³ + 5x - 2) c = 0 f'(x) = f'(c) = Need Help? Read It Watch It Value of c
The derivative of f(x) = (x + 2x)(4x³ + 5x - 2) is f'(x) = (1 + 2)(4x³ + 5x - 2) + (x + 2x)(12x² + 5). When evaluating f'(c), where c = 0, we substitute c = 0 into the derivative equation to find f'(0).
To find the derivative of f(x) = (x + 2x)(4x³ + 5x - 2), we use the product rule, which states that the derivative of the product of two functions is equal to the derivative of the first function times the second function, plus the first function times the derivative of the second function.
Applying the product rule, we differentiate (x + 2x) as (1 + 2) and (4x³ + 5x - 2) as (12x² + 5). Multiplying these derivatives with their respective functions and simplifying, we obtain f'(x) = (1 + 2)(4x³ + 5x - 2) + (x + 2x)(12x² + 5).
To find f'(c), we substitute c = 0 into the derivative equation. Thus, f'(c) = (1 + 2)(4c³ + 5c - 2) + (c + 2c)(12c² + 5). By substituting c = 0, we can calculate the value of f'(c).
To learn more about derivative click here:
brainly.com/question/25324584
#SPJ11
Suppose that x and y are related by the given equation and use implicit differentiation to determine dx y4 - 5x³ = 7x ……. dy II
This is the derivative of x with respect to y, given the equation y^4 - 5x^3 = 7x.
The equation relating x and y is y^4 - 5x^3 = 7x. Using implicit differentiation, we can find the derivative of x with respect to y.
Taking the derivative of both sides of the equation with respect to y, we get:
d/dy (y^4 - 5x^3) = d/dy (7x)
Differentiating each term separately using the chain rule, we have:
4y^3(dy/dy) - 15x^2(dx/dy) = 7(dx/dy)
Simplifying the equation, we have:
4y^3(dy/dy) - 15x^2(dx/dy) - 7(dx/dy) = 0
Combining like terms, we get:
(4y^3 - 7)(dy/dy) - 15x^2(dx/dy) = 0
Now, we can solve for dx/dy:
dx/dy = (4y^3 - 7)/(15x^2 - 4y^3 + 7)
This is the derivative of x with respect to y, given the equation y^4 - 5x^3 = 7x.
Learn more about differentiation here:
https://brainly.com/question/31383100
#SPJ11
Find the area of a rectangular park which is 15 m long and 9 m broad. 2. Find the area of square piece whose side is 17 m -2 5 3. If a=3 and b = - 12 Verify the following. (a) la+|≤|a|+|b| (c) la-bl2|a|-|b| (b) |axb| = |a|x|b| a lal blbl (d)
The area of the rectangular park which is 15 m long and 9 m broad is 135 m². The area of the square piece whose side is 17 m is 289 m².
1 Area of the rectangular park which is 15 m long and 9 m broad
Area of a rectangle = Length × Breadth
Here, Length of the park = 15 m,
Breadth of the park = 9 m
Area of the park = Length × Breadth
= 15 m × 9 m
= 135 m²
Hence, the area of the rectangular park, which is 15 m long and 9 m broad, is 135 m².
2. Area of a square piece whose side is 17 m
Area of a square = side²
Here, the Side of the square piece = 17 m
Area of the square piece = Side²
= 17 m²
= 289 m²
Hence, the area of the square piece whose side is 17 m is 289 m².
3. If a=3 and b = -12
Verify the following:
(a) l a+|b| ≤ |a| + |b|l a+|b|
= |3| + |-12|
= 3 + 12
= 15|a| + |b|
= |3| + |-12|
= 3 + 12
= 15
LHS = RHS
(a) l a+|b| ≤ |a| + |b| is true for a = 3 and b = -12
(b) |a × b| = |a| × |b||a × b|
= |3 × (-12)|
= 36|a| × |b|
= |3| × |-12|
= 36
LHS = RHS
(b) |a × b| = |a| × |b| is true for a = 3 and b = -12
(c) l a - b l² = (a - b)²
= (3 - (-12))²
= (3 + 12)²
(15)²= 225
|a|-|b|
= |3| - |-12|
= 3 - 12
= -9 (as distance is always non-negative)In LHS, the square is not required.
The square is not required in RHS since the modulus or absolute function always gives a non-negative value.
LHS ≠ RHS
(c) l a - b l² ≠ |a|-|b| is true for a = 3 and b = -12
d) |a + b|² = a² + b² + 2ab
|a + b|² = |3 + (-12)|²
= |-9|²
= 81a² + b² + 2ab
= 3² + (-12)² + 2 × 3 × (-12)
= 9 + 144 - 72
= 81
LHS = RHS
(d) |a + b|² = a² + b² + 2ab is true for a = 3 and b = -12
Hence, we solved the three problems using the formulas and methods we learned. In the first and second problems, we used length, breadth, side, and square formulas to find the park's area and square piece. In the third problem, we used absolute function, square, modulus, addition, and multiplication formulas to verify the given statements. We found that the first and second statements are true, and the third and fourth statements are not true. Hence, we verified all the statements.
To know more about the absolute function, visit:
brainly.com/question/29296479
#SPJ11
