(1) Phosphorus silicon is a semi-conductor
When Silicone is altered with Phosphorus, 4 of its electrons form covalent bonding and the 5th electron becomes delocalized and thus it increases electrical conduction
Answer:
blue blah blue blah
Explanation:
Equilibrium occurs in what type of reactions?
A. Catalytic
B. Irreversible
C. Reversible
D. Combustion
Answer:
B. Irreversible
Explanation:
Answer: C Reversible
Explanation:
Founder's Education Quiz
What is the molecular formula for a compound with a molar mass of 42.08g/mol and an empirical formula of ch2
Answer:
[tex]C_3H_6[/tex]
Explanation:
Hello!
In this case, since the empirical formula is the smallest representation of the molecular formula, it is known that the times in which the empirical formula is into the molecular formula is a whole number and is computed by dividing the molar mass of the molecular formula by that of the empirical formula as shown below:
[tex]\frac{42.08g/mol}{12.01+1.01x2}= \frac{42.08g/mol}{14.03g/mol}=3[/tex]
Thus, the molecular formula times the empirical formula by 3 to obtain:
[tex]C_3H_6[/tex]
Regards!
What makes this inauguration different from the past?
Answer:
there's just a lot of drama around grumpy trumpy's StOlEN eLecTiOn which are all just fake claims. all his hardcore followers are brainwashed into believing anything he says, so people (especially people who are inside the capitol) fear that trump's followers might incite violence AGAIN even after they broke into the Capitol on the 6th.
That's why they have the National Guard and thousands of people to keep the building secure during Biden's Inauguration.
hope this helps!
If one force on an object is 5 N upward and the other is 10 N downward what is the objects motion?
To solve this we must be knowing each and every concept related to force. Therefore, the objects motion will be towards downward with a force of 5 N.
What is force?A force is an outside entity that has the power to alter a body's state of rest or motion. It has a direction and a magnitude. The point where forces are applied is determined by the the force's direction as well as the application of the force.
Newton and dyne units are used to measure the force exerted on an item. When using the centimeter kilogram second system of units, force is measured in dynes (CGS unit). In the common international system of units, it is denoted by the letter Newton (N) (SI unit).
upward force=5 N
downward force= 10 N
total force acting on body=downward force-upward force
= 10 N - 5 N
=5 N downward force
The objects motion will be towards downward with a force of 5 N.
Therefore, the objects motion will be towards downward with a force of 5 N.
To learn more about force, here:
https://brainly.com/question/13014979
#SPJ5
1.7 x 10 cm= significant figures
Answer:
its 2
Explanation:
What carpet Burns in a deficiency of O2 a mixture of CO and CO2 forms.Carbon Burns in excess O2 to form only CO2 and CO Burns in excess O2 to form only CO2. Calculate ΔH for C(graphite +1/2O2) →CO(g).
Answer:
Explanation:
From the combustion of carbon, the reactions occurring in limited oxygen conditions are:
[tex]C(graphite) + \dfrac{1}{2}O_{2(g)} \to CO_{(g)}[/tex]
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex]
If it occurs in excess, then any leftover CO changes to CO2. i.e.
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex] ---- (1)
[tex]CO_{(g)} + \dfrac{1}{2}O_{(g)} \to CO_{2(g)}[/tex] ----- (2)
From (1), the enthalpy change is:
[tex]\Delta H_{rxn1} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{f C(graphite)}+ \Delta H^0_{fCO_2(g)}[/tex]
[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol -(0+0)[/tex]
[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol[/tex]
From (2), the enthalpy change is:
[tex]\Delta_{rxn2} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{fCO(g)} + \dfrac{1}{2} \Delta H^0_{fO_2(g)})[/tex]
[tex]\Delta_{rxn2} = -393.5 \ kJ/mol -(-110.5 + \dfrac{1}{2}(0))[/tex]
[tex]\Delta_{rxn2} = -283.0 \ kJ/mol[/tex]
Subtracting (2) from (1), we get:
[tex]C(graphite) + O_{2(g)} \to CO_{2(g)} \ \ \ \Delta H_{rxn} = -393.5 \ kJ/mol}[/tex]
[tex]CO_{(g)} + \dfrac{1}{2} O_2(g) \to CO_{2(g)}} \ \ \ \Delta H _{rxn2} = -283.0 \ kJ/mol[/tex]
[tex]C(graphite) + O_{2(g)} \to CO (g) + \dfrac{1}{2}O_{2(g)} \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]
[tex]C(graphite) + \dfrac{1}{2} O_{2(g)} \to CO (g) \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]
The enthalpy change ΔH of the reaction = -110.5 kJ/mol
PLEASE HELP FREE BRAINLIEST DUE AT 1:40 PM EST
A block with a volume of 20 cm3 has a density of 5 g/cm3. The block is cut into two pieces. One piece has a volume of 15 cm3, and the other piece has a volume of 5 cm3. What are the densities of the two pieces?
Answer:
wouldnt they still have the same density?
Explanation:
for example, the density of iron is 7.874 g/cm^3 no matter how big the piece is. I hope this helps.
Why is there no sound in outer space? PLEASE HELP IF YOU WANT BRAINLEIST AND A LIKE ON URE COMMENT!
A. The speed of sound is too slow for space.
B. There is no medium in which it can travel.
C. There are too many other noises.
D. There is only echolocation in space.
Answer:
B
Explanation:
How would a long period without sunlight affect the food web?
It would cause consumers to consume more food.
It would have no effect on the food web.
It would stop decomposers from breaking down matter.
It would stop producers from producing food.
Answer: it would stop producers from producing food.
Explanation: why? Without the action of the producers to turn sunlight into food, the producers would die, and consumers that rely on them would lose their food source and die too.
Answer:
It would stop producers from producing food
Explanation:
Producers would die, and if producers died, consumers would die too.
Hope this helps
Which of the following would be most likely to experience strong intermolecular forces?
A. Molecules that contain no electrically charged regions.
B. Molecules that contain atoms of oxygen.
C. Molecules that are composed of solely ions.
D. Molecules that have both negatively and positively charged parts.
Answer:
The correct answer is D
Explanation:
Just took quiz
What is the systematic name of the following compound?
Li2S
Answer:
the systematic name is called Lithium sulfide.
An inorganic substance composed of the elements lithium (Li) and sulfur (S) is known as lithium sulfide [tex](Li_2S)[/tex].
It is a substance that solidifies in the shape of a crystal. Lithium ions in lithium sulfide have a positive charge, while sulfide ions have a negative charge. The chemical lithium sulfide is important in many industries. It is often employed in the synthesis of various lithium compounds, the manufacture of lithium batteries, and the manufacture of ceramics. Due to their high energy density, lithium batteries are often employed in portable electronics and electric vehicles.
Lithium sulfide is an ionic compound that has a high melting point in terms of physical characteristics. Although it is insoluble in water, many organic solvents can help dissolve it.
Learn more about Lithium sulfide, here:
https://brainly.com/question/30637961
#SPJ6
A patient is prescribed 100mg/day of antibiotic for 2 weeks. The antibiotic is available in vials that contain 20mg/vial of the drug. How many vials are necessary for the entire treatment?
What element corresponds to period 5, group 2
Answer:
Strontium is the second element placed in the 5th period
Hope this will help you if not so advance sorry :)
The order is Solumedrol 3 mg/kg for a child weighing 20 kg. Solumedrol is available as 125 mg/2ml. How many ml will be given
Answer:
0.96mL must be given
Explanation:
First, we need to obtain the mass of Solumedrol required for the child by using its mass. Then, with this mass we can solve the volume that must be administered:
Mass of solumedrol required:
20kg * (3mg / kg) = 60mg of solumedrol are required.
Volume given:
60mg Solumedrol * (2mL / 125mg) =
0.96mL must be given
what element is in group 13, period 4
Answer:
Gallium
Explanation:
Answer:
Gallium
Explanation:
How many atoms are in .938 moles of CO2?
Answer: 1.695x10^24 atoms
Explanation: 0.938 moles CO2 = 0.938xavogadro number molecules CO2, so number of atoms = 3x0.938x6.02214076x10^23 = 1.695x10^24
Give the IUPAC name for each compound.
Answer:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
Explanation:
Hello!
In this case, according to the IUPAC rules for the listed alkyl halides, we first need to name the halogens (considering periodic order) then alkyl radicals and finally the parent chain; thus, the names are given below:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
e. 5-chloro-1-bromo-1,1,5-trimethyl-pentane (radicals are not clear).
Best regards!
determine the molar mass for ammonia (NH3) in g/mol.
Answer:
17.031 g/mol
Explanation:
how are the terms atom and element different?
Answer:
Element is made from same type of atoms
While atom is present in element made up of different particles like proton neutrons electron etc
Explanation:
What is a molecule contains the genetic instructions for the development and functioning of all living organisms found in the nucleus of a cell
g Suppose a 49. L reaction vessel is filled with 1.5 mol of NO. What can you say about the composition of the mixture in the vessel at equilibrium
The question is incomplete, the complete question is:
At a certain temperature, the equilibrium constant [tex]K_{eq}[/tex] for the following reaction is 0.74:
[tex]NO_3(g)+NO(g)\rightleftharpoons 2NO_2(g)[/tex]
Suppose a 49.0 L reaction vessel is filled with 1.5 mol of [tex]NO_3[/tex] and 1.5 mol of NO. What can you say about the composition of the mixture in the vessel at equilibrium?
A. There will be very little [tex]NO_3[/tex] and NO.
B. There will be very little [tex]NO_2[/tex]
C. Neither of the above is true.
Answer: The correct option is B. there will be very little [tex]NO_2[/tex]
Explanation:
We are given:
Initial moles of [tex]NO_3[/tex] = 1.5 moles
Initial moles of NO = 1.5 moles
Volume of vessel = 49 L
As, moles of reactants and moles of products are equal, the volume term will not appear in the equilibrium constant expression.
Equilibrium constant for the reaction = 0.74
For the given chemical equation:
[tex]NO_3(g)+NO(g)\rightleftharpoons 2NO_2(g)[/tex]
Initial: 1.5 1.5 -
At eqllm: 1.5-x 1.5-x 2x
The expression of equilibrium constant for the above reaction:
[tex]K_{eq}=\frac{[NO_2]^2}{[NO_3]\times [NO]}[/tex]
Putting values in above equation, we get:
[tex]0.74=\frac{(2x)^2}{(1.5-x)(1.5-x)}\\\\x=-1.13, 0.451[/tex]
Neglecting the negative value of equilibrium constant because concentration cannot be negative
Equilibrium concentration of [tex]NO_3[/tex] = (1.5 - x) = (1.5 - 0.451) = 1.049 moles
Equilibrium concentration of NO = (1.5 - x) = (1.5 - 0.451) = 1.049 moles
Equilibrium concentration of [tex]NO_2[/tex] = 2x = [tex](2\times 0.451)=0.902mol[/tex]
There are 3 possibilities:
If [tex]K_{eq}<1[/tex], the reaction is reactant favoredIf [tex]K_{eq}>1[/tex], the reaction is product favored.If [tex]K_{eq}=1[/tex], the reaction is in equilibrium.Here, the value of [tex]K_{eq}=0.74[/tex], which is less than 1, therefore the reaction is reactant favored and we can say that there will be very little [tex]NO_2[/tex].
Hence, the correct option is B. there will be very little [tex]NO_2[/tex]
How many milliliters of 60% carbonic acid must be mixed with how many milliliters of 15% carbonic acid to make 650 milliliters of a 38% carbonic acid solution
Answer:
348.9 mL of the 60% solution and 251.1 mL of the 15% solution.
Explanation:
First, we calculate how many mililiters of pure carbonic acid are there in 650 mL of a 38% solution:
650 mL * 38/100 = 247 mLThen we can express the sum of both initial solutions as:
1) x * 60/100 + y * 15/100 = 247for the volume of carbonic acid; and
2) x + y = 600 mLFor the volume of the solutions.
We now have a system of two equations and two unknowns (x is the volume of the 60% solution and y is the volume of the 15% solution).
We express x in terms of y in equation 2):
x = 600 - yAnd replace x in equation 1):
(600 - y) * 60/100 + y * 15/100 = 247360 - 0.6y + 0.15y = 247-0.45y = -113y = 251. 1 mLFinally we calculate x using equation 2):
x + 251.1 = 600x = 348.9 mLWhich of these is not a property of minerals?
A) Clevage
B) Fracture
C) Color
D) Smell
Write ashort note on the
first battle of
of panipat
Answer:
The First Battle of Panipat was fought between the invading forces of Babur and the Lodi Empire, which took place on 21 April 1526 in North India. It marked the beginning of the Mughal Empire. This was one of the earliest battles involving gunpowderfirearms and field artillery.
For you to write an essay on Panipat first bring into view
Introduction body conclusionThen write a brief story using this format.
How to write a short note on the first battle of Panipat?In writing this essay, you must consider the structure and content of the essay or short note
For structure kick off with
Introduction body conclusionIn conclusion, for the content of the short note you can consider this,
Panipat fought its first battle on 21 April 1526 in the North of India, This battle was fought between the invading powers of Babur and the Lodi Empire.
Read more on History
https://brainly.com/question/6838058
3) Tears are produced by the lacrimal glands located:
A) above the lateral canthus of each eye
B) below the medial canthus of each eye
C) below the lateral canthus of each eye
D) above the medial canthus of each eye
E) behind the nasal bones
An isotope has three forms. 30% have a mass of 4 amu, 20% have a mass of 5 amu and
50% have a mass of 3 amu, Average atomic mass will be closest to
The average atomic mass will be 3.70 amu
We have to obtain the average atomic mass by multiplying the mass of each isotope in amu by the relative abundance of the given isotope as contained in the data of the question.
Hence;
Average atomic mass;
(0.30 * 4) + (0.20 * 5) + (0.50 * 3)
= 1.20 + 1.00 + 1.50
= 3.70 amu
https://brainly.com/question/13292428
Prokaryotic is an example of a/an-
A:tissue
B:cell type
C:organ
D:organism
Answer:
B. Cell Type
Explanation:
that is the answer i believe
Answer:
option b- cell type
Explanation:
almost absolutely positive
Which word describes the amount of matter an object contains?
altitude
density
mass
pressure
Answer:
Mass
Explanation:
Answered this question multiple times and got it correct
Hope this helped!
Stay safe!
What one word completes the
If a plant is losing water faster than it can be replaced by its roots, its stomata will
sentence?
Answer:
it causes the cells to become flaccid and the stomata openings to close
Explanation:
the stomata closes to reduce water loss
When a plant is losing water at a greater rate than it can be replaced by its roots, then in such a case, the stomata will get close to reduce the loss of water.
• Generally, the opening of stomata takes place in the day and gets close at night. To prevent the loss of water stomata get close during the night.
• However, in certain cases, even during the day, when the plant experiences loss of water due to conditions like drought then stomata remain close during the day also.
• This opening and closing of stomata take place as a response to the signals from the external environment.
Therefore, when more amount of water is loosing from the plant than getting absorbed by the roots, the stomata gets the signal to remain close to prevent water loss and death of the plant.
To know more about stomata and water loss:
https://brainly.com/question/2611673
