Answer:
It has a negative charge and is located in orbitals around the nucleus
Explanation:
The statement describes an electron is " It has a negative charge and is located in orbitals around the nucleus."
What is electron?The electron would be a subatomic particle with a negatively one elementary charge electric charge.
What is nucleus?Protons, that have a positive charge, as well as neutrons, which have no electrical charge, make up the nucleus. Quarks were subatomic particles that make up protons but also neutrons.
Electrons were present surrounding the atom's nucleus, in contrast to protons as well as neutrons, that are contained within the nucleus at its core. Negative electrons were drawn to the positive nucleus since the electric charges of opposite polarity attract one another.
To know more about electrons and nucleus.
https://brainly.com/question/23366064
#SPJ3
Calculate the number of iron atoms contained in 434.52 g of iron: Question 7 options: 2.620 x 10 26 Fe atoms 5.769 x 10 24 Fe atoms 4.685 x 10 24 Fe atoms 3.223 x 10 25 Fe atoms 1.169 x 10 23 Fe atoms
Answer:
[tex]\boxed {\boxed {\sf 4.685 \times 10^{24} \ Fe \ atoms}}[/tex]
Explanation:
We are asked to convert grams of iron to atoms of iron.
1. Convert Grams to MolesFirst, we convert grams to moles. We use the molar mass or the mass in 1 mole of a substance. This is found on the Periodic Table because the molar mass is equal to the atomic mass, but the units are grams per mole instead of atomic mass units. Look up iron's molar mass.
Fe: 55.84 g/molWe convert using dimensional analysis, so we must set up a ratio using the molar mass.
[tex]\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
We are converting 434.52 grams to moles, so we multiply by this value.
[tex]434.52 \ g \ Fe *\frac {55.84 \ g \ Fe}{ 1 \ mol \ Fe}[/tex]
Flip the ratio so the units of grams of iron cancel.
[tex]434.52 \ g \ Fe *\frac { 1 \ mol \ Fe}{55.84 \ g \ Fe}[/tex]
[tex]434.52 *\frac { 1 \ mol \ Fe}{55.84}[/tex]
[tex]\frac { 434.52}{55.84} \ mol \ Fe[/tex]
[tex]7.781518625 \ mol \ Fe[/tex]
2. Convert Moles to AtomsNext, we convert moles to atoms. We use Avogadro's Number or 6.02 ×10²³. It is the number of particles (atoms, molecules, formula units, etc) in 1 mole of a substance. For this problem, the particles are atoms of iron. We set up another ratio using this number.
[tex]\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
Multiply by the number of moles we calculated.
[tex]7.781518625 \ mol \ Fe *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 \ mol \ Fe}[/tex]
The units of moles of iron cancel.
[tex]7.781518625 *\frac {6.02 \times 10^{23} \ atoms \ Fe }{ 1 }[/tex]
[tex]4.68447421 \times 10^{24} \ atoms \ Fe[/tex]
The correct answer choice is Choice 3: 4.685 × 10²⁴ atoms of iron.
HBr can be added to an alkene in the presence of peroxides (ROOR). What function does the peroxide serve in this reaction
Answer:
Radical chain initiator
Explanation:
The peroxide here serves as a radical chain initiator. In the field of chemistry the radical initiatives are those substances that are used in industrial processes like polymer synthesis. These initiatives have weak bonds generally and they're mostly used to create free radicals. These radicals are atoms that have odd numbers of electrons. Peroxide is an example of such.
A graph of gas pressure versus the number of particles in a container is a straight line. Which other relationship will have a similar graph?
Answer:
volume versus temperature, because they are also directly proportional.
Explanation:
Just took the test!
What Volume of silver metal will weigh exactly 2500.0g. The density of silver
Answer:
cm3 = 2500.0 g / 10.5 g/cm3 = 238 cm3
15.27
The following equilibria were attained at 823 K:
COO(s) + H2() Co(s) + H2O(g) K = 67
COO(s) + CO(8) = Co(s) + CO2(8) K = 490
Based on these equilibria, calculate the equilibrium con-
stant for
H2(g) + CO2(g) = CO(g) + H2O(g) at 823 K.
The equilibrium constant for the reaction is K = 0.137
We obtain the equilibrium constant considering the following equilibria and their constants:
COO(s) + H₂(g) → Co(s) + H₂O(g) K₁ = 67
COO(s) + CO(g) → Co(s) + CO₂(g) K₂ = 490
We write the first reaction in the forward direction because we need H₂(g) in the reactants side:
(1) COO(s) + H₂(g) → Co(s) + H₂O(g) K₁ = 67
Then, we write the second reaction in the reverse direction because we need CO₂(g) in the reactants side. Thus, the equilibrium constant for the reaction in the reverse direction is the reciprocal of the constant for the reaction in the forward direction (K₂):
(2) Co(s) + CO₂(g) → COO(s) + CO(g) K₂ = 1/490
From the addition of (1) and (2), we obtain:
COO(s) + H₂(g) → Co(s) + H₂O(g) K₁ = 67
+
Co(s) + CO₂(g) → COO(s) + CO(g) K₂ = 1/490
-------------------------------------------------
H₂(g) + CO₂(g) → CO(g) + H₂O(g)
Notice that Co(s) and COO(s) are removed that appear in the same amount at both sides of the chemical equation.
Now, the equilibrium constant K for the reaction that is the sum of other two reactions is calculated as the product of the equilibrium constants, as follows:
K = K₁ x K₂ = 67 x 1/490 = 67/490 = 0.137
You can learn more about equilibrium constants here:
https://brainly.com/question/15118952
HELP ASAP 15 POINTS
Why was Dalton's theory of the atom incorrect?
A. Dalton theorized that atoms were indivisible but they are actually made of smaller parts.
B. Dalton theorized that had negative charges spread throughout them but they are actually in electron shells.
C. Dalton' theory was correct.
D. Dalton theorized that atoms were too small to see but they are not.
Answer:
Answer is A.
Explanation:
The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. According to Dalton, the atoms of same element are similar in all respects. However, atoms of some elements vary in their masses and densities. These atoms of different masses are called isotopes. :)
3. Oxalic acid, C H20, is a toxic substance found in rhubarb leaves. When mixed with sufficient
quantities of a strong base, this weak diprotic acid loses two protons to form a polyatomic ion
called oxalate, C2022. Write a balanced equation that describes the reaction between oxalic acid
and sodium hydroxide.
Answer:
COOHCOOH + 2OH⁻ ⇄ C₂O₄²⁻ + 2H₂O
Explanation:
The reaction of oxalic acid with a strong base like sodium hydroxide is the following:
COOHCOOH + OH⁻ ⇄ COOHCOO⁻ + H₂O (1)
In this first reaction, the oxalic acid loses one proton. In a second reaction with NaOH, the ion COOHCOO⁻ loses its second proton to form ion oxalate as follows:
COOHCOO⁻ + OH⁻ ⇄ C₂O₄²⁻ + H₂O (2)
The general reaction between oxalic acid and NaOH is (eq 1 + eq 2):
COOHCOOH + 2OH⁻ ⇄ C₂O₄²⁻ + 2H₂O
I hope it helps you!
How many moles of HCl are contained in 0.600 L of 0.120 M HCl?
Please explain and show work.
We know
[tex]\boxed{\Large{\sf Molarity=\dfrac{No\:of\:moles\:of\:solute}{Volume\:of\:solution\:in\;\ell}}}[/tex]
[tex]\\ \Large\sf\longmapsto No\:of\:moles\:of\:HCl=0.6\times 0.12[/tex]
[tex]\\ \Large\sf\longmapsto No\:of\:moles\:of\:HCl=0.072mol[/tex]
Answer:
0.0.72
Explanation:
moles = V*CM=0.6*0.12=0.0.72
An ice cube, measured at 260 Kelvin, is dropped into a cup of tea that is 350 Kelvin. The temperature of the tea is recorded every 30 seconds and shows the temperature dropping for 4 minutes. After 4 minutes the temperature stays steady at 300 Kelvin. What is this called?
A. Thermal equilibrium
B. Specific heat capacity
C. Latent heat
D. Temperature transfer
Answer:
Specific Heat Capacity
What must happen to uranium before it can be used as a fuel source?
Answer: Uranium enrichment. Uranium is used to fuel nuclear reactors; however, uranium must be enriched before it can be used as fuel. Enriching uranium increases the amount of uranium-235 (U235) that can sustain the nuclear reaction needed to release energy and produce electricity at a nuclear power plant.
Write a balanced chemical equation for the reaction that occurs
when:
(a) titanium metal reacts with O21g2;
(b) silver(I) oxide decomposes into silver metal and oxygen gas when heated;
(c) propanol, C3H7OH1l2 burns in air;
(d) methyl tert-butyl ether, C5H12O1l2, burns in air.
Answer:
Explanation:
A balanced chemical equation refers to the reaction taking place whereby the number of atoms associated in the reactants side is equivalent to the number of atoms on the products side.
From the given information, the balanced equations are as follows:
[tex]\mathbf{(a) \ \ \ Ti(s) + O_{2(g)} \to TiO_{2(s)}}[/tex]
[tex]\mathbf{(b) \ \ \ 2Ag_{2}O \to 4Ag_{(s)} + O_{2(g)}}[/tex]
[tex]\mathbf{(c) \ \ \ 2C_3H_7OH + 9O_2 \to 6CO_2+8H_2O}[/tex]
[tex]\mathbf{(d) \ \ \ 2C_5 H_{12}O \to 10 CO_2 + 12 H_2O}[/tex]
Which of the following releases hormones into your bloodstream?
A. Endocrine system
B. Sympathetic nervous system
C. Lobal system
a
D. Autonomic nervous system
Answer:
answer is A. Endocrine system
Endocrine glands secrete hormones straight into the bloodstream. Hormones help to control many body functions, such as growth, repair and reproduction.
Answer:
A endocrine system
this is the answer
Chad drew a diagram to compare animal cells and bacterial cells.
Which label belongs in the area marked X?
Explanation:
Don't know wwwwmkbnkkkoo
A substance is tested and has a pH of 7.0. How would you classify it?
importance of hematology
Answer:
Haematology is the specialty important for the diagnosis and management of a wide range of benign and malignant disorders of the red and white blood cells, platelets and the coagulation system in adults and children.
PLEASE HELP!!
this is on USAtestprep
a)
b)
c)
d)
Answer:
The correct answer is option ( D )
Explanation:
Hope it helps you
have a good day dear :)
What volume of each solution contains 0.14 mol of KCl? Express your answer using two significant figures.
1.8 M KCl
Answer:
Solution given:
1 mole of KCl[tex]\rightarrow [/tex]22.4l
1 mole of KCl[tex]\rightarrow [/tex]74.55g
we have
0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g
74.55g of KCl[tex]\rightarrow [/tex]22.4l
10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre
volume of each solution contains 0.14 mol of KCl contain 3.11litre.
[tex]\:[/tex]
1 mole of KCl → 22.4l
1 mole of KCl → 74.55g
we have
0.14 mole of KCl → 74.55*0.14=10.347g
74.55g of KCl → 22.4l
10.347 g of KCl → 22.4/74.55*10.347=3.11litre
volume of each solution contains 0.14 mol of KCl contain 3.11litre.
Based on the standard EMF series and your knowledge of half-reactions, determine the cell potential and spontanei ty of a cell that consists of a pure cobalt electrode in a solution of Co^2+ ions; the other half is a lead electrode immersed in a Pb^2+ solution.
Pb +2e- Pb Sn +2e Sn Ni 2e Ni Co 2e -0.126 -0.136 -0.250 -0.277 Co
a. +0.403, spontaneous
b. -0.403, nonspontaneous
c. +0.151, spontaneous
d. -0.151, nonspontaneous
Answer:
+0.151, spontaneous
Explanation:
Given that;
Co^2+(aq) + 2e ---->Co(s) -0.28 V
Pb^2+(aq) + 2e ---->Pb(s). -0.13 V
Hence Co is the anode and Pb is the cathode
E°cell = E°cathode - E°anode
So;
E°cell = -0.13 V - (-0.28 V)
E°cell = 0.15 V
The cell reaction is spontaneous since E°cell is positive.
How are all planets in the solar system similar?
A. They have a gas atmosphere.
B. They have a water atmosphere.
C. They have a gas-surface composition.
D. They have a rock surface composition.
THIS IS FOR SCIENCE!!!!!!
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Answer:
They have a rock surface composition.
Explanation:
I hope this will help you
help me in my hw,wt is physical change and chemical change Answer it asap plz don't spam
Answer:
Sorry but i don't undertsnad the question.
Explanation:
Answer:
A physical change is a change to the physical—as opposed to chemical—properties of a substance. They are usually reversible. The physical properties of a substance include such characteristics as shape, color, texture, flexibility, density, and mass.
A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust.
Do u want examples ?
A gas within a piston–cylinder assembly undergoes an isothermal process at 400 K during which the change in entropy is −0.3 kJ/K. Assuming the ideal gas model for the gas and negligible kinetic and potential energy effects, evaluate the work, in kJ.
Answer:
W = -120 KJ
Explanation:
Since the piston–cylinder assembly undergoes an isothermal process, then the temperature is constant.
Thus; T1 = T2 = 400K
change in entropy; ΔS = −0.3 kJ/K
Formula for change in entropy is written as;
ΔS = Q/T
Where Q is amount of heat transferred.
Thus;
Q = ΔS × T
Q = -0.3 × 400
Q = -120 KJ
From the first law of thermodynamics, we can find the workdone from;
Q = ΔU + W
Where;
ΔU is Change in the internal energy
W = Work done
Now, since it's an ideal gas model, the change in internal energy is expressed as;
ΔU = m•C_v•ΔT
Where;
m is mass
C_v is heat capacity at constant volume
ΔT is change in temperature
Now, since it's an isothermal process where temperature is constant, then;
ΔT = T2 - T1 = 0
Thus;
ΔU = m•C_v•ΔT = 0
ΔU = 0
From earlier;
Q = ΔU + W
Thus;
-120 = 0+ W
W = -120 KJ
It is advised that the bromobenzene solution be added slowly to the magnesium-ether solution so that it isn't present in a high concentration, thus reducing the amount of by-product formed. What is the by-product
Answer:
Biphenyl
Explanation:
The reaction of bromo benzene with magnesium-ether solution yields a Grignard reagent.
The byproduct of this reaction is biphenyl. It is formed when two unreacted bromobenzene molecules are coupled together.
Hence, It is advised that the bromobenzene solution be added slowly to the magnesium-ether solution so that it isn't present in a high concentration, thus reducing the amount of biphenyl by-product formed.
Nitrogen gas can be prepared by passing gaseous ammonia over solid copper (II) oxide at high temperatures. If 18.1 g of Nh3 is reacted with 90.4 g of CuO, which is the limiting reactant? How many grams of N2 will be formed? Explain how you solved for your answers.
Balanced Equation: 2NH3 + 3CuO → 3Cu + N2 + 3H2O
I first converted the given grams of the reactants into moles, and then divided the moles by the coefficients in front of each of the reactant. The result with the smallest value will be the limiting reactant, and the value of CuO was the smallest, so it's the limiting reactant.
After figuring out which reactant is the limiting one, I took their given grams and converted it into moles, the divided it by the ratio of N2 to CuO (it's in the equation) to obtain the moles of N2, and then multiply it with the molar mass of N2 to get its mass in grams.
385 x 42.13 x 0.079 is (consider significant figures):
385 x 42.13 x 0.079 = 1281.38395
convert 100kcals to kilojoules
Answer:
Explanation:
418.4kj is the correct answer
The radioactivity due to carbon-14 measured in a piece of a wood from an ancient site was found to produce 20 counts per minute from a given sample, whereas the same amount of carbon from a piece of living wood produced 160 counts per minute. The half-life of carbon-14, a beta emitter, is 5730 y. The age of the artifact is closest to
Answer:
The answer is "17200 years".
Explanation:
Given:
[tex]A = 20 \ \frac{counts}{minute}\\\\A_{o} = 160\ \frac{counts}{minute}[/tex]
Let the half-life of carbon-14, is beta emitter, is [tex]T = 5730\ years[/tex]
Constant decay [tex]\ w = \frac{0.693}{ T}[/tex]
[tex]= 1.209 \times 10^{-4} \ \frac{1}{year}\\[/tex]
The artifact age [tex]t= ?[/tex]
[tex]A = A_{o} e^{-wt} \\\\e^{-wt} = \frac{A}{A_{o}}\\\\-wt = \ln \frac{A}{A_{o}}\\\\= -2.079\\\\t = 1.7199 \times 10^{4} \ years\\\\\sim \ 17200\ years\\[/tex]
Select the correct relationship among the concentrations of species present in a 1.0 M aqueous solution of the weak acid represented by HA. A. [H2O] > [HA] > [A-] > [H3O ] > [OH-] B. [H2O] > [A-] ~ [H3O ] > [HA] > [OH-] C. [HA] > [H2O] > [A-] > [H3O ] > [OH-] D. [H2O] > [HA] > [A-] ~ [H3O ] > [OH-] E. [HA] > [H2O] > [A-] ~ [H3O ] > [OH-]
Answer:
D
Explanation:
We have to bear in mind that the acid is a weak acid. A weak acid does not dissociate completely in solution. We will have more concentration of undissociated acid than A^- and H3O^+ and OH^- in the system at equilibrium.
Being a weak acid, there is maximum concentration of water molecules followed by that of undissiociated acid.
Hence, for this solution, the concentration of ions in solution follows the order;
[H2O] > [HA] > [A-] ~ [H3O ] > [OH-]
Sodium ethoxides are made by direct reaction of:
a. Sodium hydroxide and dry ethanol
b. Sodium metal and 70% ethanol
c. Sodium hydroxide and 70% ethanol
d. Sodium metal and dry ethanol
Answer:c
Explanation:
What is the balanced form of the following equation?
Br2 + S2O32- + H2O → Br1- + SO42- + H+
Answer:
5 Br₂ + S₂O₃²⁻ + 5 H₂O ⇒ 10 Br⁻ + 2 SO₄²⁻ + 10 H⁺
Explanation:
We will balance the redox reaction through the ion-electron method.
Step 1: Identify both half-reactions
Reduction: Br₂ ⇒ Br⁻
Oxidation: S₂O₃²⁻ ⇒ SO₄²⁻
Step 2: Perform the mass balance, adding H⁺ and H₂O where appropriate
Br₂ ⇒ 2 Br⁻
5 H₂O + S₂O₃²⁻ ⇒ 2 SO₄²⁻ + 10 H⁺
Step 3: Perform the charge balance, adding electrons where appropriate
2 e⁻ + Br₂ ⇒ 2 Br⁻
5 H₂O + S₂O₃²⁻ ⇒ 2 SO₄²⁻ + 10 H⁺ + 10 e⁻
Step 4: Make the number of electrons gained and lost equal
5 × (2 e⁻ + Br₂ ⇒ 2 Br⁻)
1 × (5 H₂O + S₂O₃²⁻ ⇒ 2 SO₄²⁻ + 10 H⁺ + 10 e⁻)
Step 5: Add both half-reactions
5 Br₂ + S₂O₃²⁻ + 5 H₂O ⇒ 10 Br⁻ + 2 SO₄²⁻ + 10 H⁺
Conversion Problem (show all work):
1. A patient required 3.0 pints of blood during surgery. How many liters does this correspond
to? Show all work. Use conversion factors available in the text or the exam packet. (4)
1.42liters, which is equivalent to 3pints, of blood is required for the surgery
Pints is a unit of measurement for volume in the United States. However, it can be converted to litres using the following equation:1 US pint = 0.473 liters
Hence, according to this question which states that a patient required 3.0 pints of blood during surgery. This means that the patient required:3 × 0.473
= 1.419 liters of blood for the surgery
1.42liters, which is equivalent to 3pints, of blood is required for the surgeryLearn more at: https://brainly.com/question/24168664
