Help me please it’s due today

Answer:

C3H8

Propane/Formula

Explanation:

hope this helps

Answer:

Disagree with the suggestion based on the hygroscopic nature of anhydrous magnesium sulfate

Explanation:

Magnesium sulfate in the anhydrous form is a drying agent. A drying agent salts of inorganic compounds that has the capability of absorbing water to become hydrated, when placed in the presence of a wet surface or moist air

Anhydrous magnesium sulfate is therefore hygroscopic such that it absorbs water from the atmosphere and becomes hydrated and increases in size as its volume is increased according to the following chemical equation

MgSO₄(s) + 7H₂O(l) → MgSO₄·7H₂O(s)

The molar mass of anhydrous magnesium sulfate = 120.366 g/mol

The molar mass of the heptahydrate = 246.47 g/mol

Therefore, the mass of the magnesium sulfate doubles when it forms the heptahydrate, and the magnesium sulfate grows bigger.

Answer:

bond

Explanation:

It is a polar bond because it is when two atoms bond

Tubular organism with tentacles surrounding its mouth; a cnidarian

Hydra

SORRY I DON'T KNOW CORRECT BUT

I THOUGHT THATH THIS IS A CATEPILLAR

PLEASE THANKS THIS ANSWER

Answer:

Excited State Configuration: 1s^2 2s^2 2p^4 3s^1 are sperated by 13.00 eV.

Answer:

Opposite charges attract one another. The slight positive charges on the hydrogen atoms in a water molecule attract the slight negative charges on the oxygen atoms of other water molecules. This tiny force of attraction is called a hydrogen bond.

Considering the definition of hydrogen bond, the correct answer is option A: he Oxygen has a partial negative charge which attracts atoms and molecules that have a position or partial positive charge.

In hydrogen bonds, a molecule that presents hydrogen interacts with another that presents an atom with high electronegativity, such as oxygen, fluorine or nitrogen (O, F, N). In this way, between the hydrogen, which has a low electronegativity and the electronegative atom, an interaction is established, due to their opposite charges.

On the other hand, electronegativity is the ability of an atom to attract shared electrons in a covalent bond.

In the case of water, because oxygen is more electronegative than hydrogen, electrons, which have a negative charge, are more likely to be closer to the oxygen atom than to the hydrogen atom, which causes each hydrogen atom to have a positive charge is called a positive partial charge, and that of oxygen, a negative charge, since it has the electrons closer together.

In summary, the correct answer is option A: he Oxygen has a partial negative charge which attracts atoms and molecules that have a position or partial positive charge.

Learn more:

Answer:

C) hydrogen bonds

Explanation:

The abnormally high boiling point of HF compared to HCl is primarily due to the intermolecular forces called hydrogen bonds.

Hydrogen bonds are intermolecular forces of attraction between polar molecules in which a hydrogen atom is directly joined to a highly electronegative atom (oxygen, nitrogen or fluorine).

Hydrogen bonds are very strong force of attraction compared to dipole - dipole attraction that holds the HCl together.

Answer:

I believe the answer is A. molecules are larger than atoms so they should be visible and atoms and molecules are indeed different

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the correct option is option A.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.  Most atoms are bonded together to make a molecule. Molecules combine to form compounds.

Therefore, the correct option is option A.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer:

All except a diamond

Explanation:

The helium in the balloon has mass it fills the space its in.

The neon-filled tube has mass because it takes up space.

Water in a glass has mass because the water is taking up space.

A diamond does not because it does not take up space.

Moles of Carbon dioxide : n = 4.037 x 10⁻³

Given

2.43 x 10²¹ molecules of Carbon dioxide

Required

Moles

Solution

1 mol = 6.02 x `10²³ particles(molcules, atoms, ions)

Can be formulated :

N = n x No

n = moles

No = Avogadro's number 6.02 x `10²³

moles of Carbondioxide :

n = N/No

n = 2.43 x 10²¹ / 6.02 x `10²³

n = 4.037 x 10⁻³

Answer:

Only reaction 1

Explanation:

C + O2 → CO

the charge of C in CO is +2 (oxidation)

from 0 to +2

the charge of O in CO is -2 (reduction)

from 0 fo -2

Hence it is a redox (reduction-oxidation) reaction

This is also valid for,

C + O2 → CO2

the charge of C in CO2 is +4 (oxidation)

charge increases from 0 to +4

the charge of O in CO2 is -2 (reduction)

charge decreases from 0 to -2

hence, it is a redox reaction

K2SO4 + CaCl → KCl + CaSO4

none of the charges changes in this reaction

please recheck, for this may not be the correct answer

Answer:

3 atoms of O

8.57g

Explanation:

The problem here is to find the mass of oxygen in the compound and the number of atoms of oxygen.

 The formula of the compound is:

 NaHCO₃;

   Here we have:

      1 atom of Na

     1 atom of H

     1 atom of C

     3 atoms of O

So there are 3 atoms of O

To find the mass of oxygen , we use the molar mass of oxygen;

     Molar mass of oxygen  = 16g/mol

 Mass of oxygen  = [tex]\frac{3(16)}{84.01}[/tex]  x 15  = 8.57g

Answer:

B. Halogen

Explanation:

Halogens are the family of chemical elements found in the group VIIA of the periodic table which means they possess seven (7) outer electrons. Some examples of halogens are Fluorine (F), Iodine (I), Bromine (Br), and Chlorine (Cl).

A halogen, or an element located in group 7A, will form a salt when reacted with a metal atom.

For example, when Chlorine reacts with Sodium it would form a salt known as Sodium Chloride.

Na + Cl ----> NaCl

Answer:

D . A substance with a pH of 8

Explanation:

pH stands for "Potential for Hydrogen." This is an indicator of a solution's acidity or alkalinity. It is also used to tell which chemicals are great for cleaning.

pH 7 and pH 8 are both considered "neutral pH," thus, solutions with these pH are often used as dishwashing detergents because they do not destroy the surfaces of objects. However, pH 8 is said to be more alkaline in nature. This allows it to destroy the residues, such as fats and oils, in pots and pans. It is the pH of baking soda.

Answer:2H₂+ O₂→ 2H₂O the reactants are 2H₂ and O₂ ... if the theoretical yield is 95 g of water after the chemical reaction you may have only 45g of water

i think

Explanation:

Answer:

Each time an excited helium atom falls back from an excited state to its ground state or to a lower energy state, it emits a photon of radiation that shows up as this specific line-emission spectrum.

Explanation:

Answer:

A physical change.

Explanation:

Have a wonderful day!

Answer:

I think It's C

Explanation:

due to higher waves can get easy transfers and receive those signals for most things, such as radios, TVs, phone signals etc etc

The use of high-frequency radio waves, a beneficial technological advancement for humans because they travel over longer distances.

The frequency of a repeated event is its number of instances per unit of time. In certain cases, it is also referred to as temporal frequency or ordinary frequency to underline differences with spatial and angular frequencies, respectively.

The number of waves that pass a specific place in a predetermined period of time is known as the wave frequency. The hertz (Hz) is the SI unit for wave frequency, where 1 hertz is equivalent to 1 wave crossing a fixed point in 1 second.

The vibrations that created the wave had the same frequency as the wave itself. For instance, you need to move a rope up and down faster to produce a wave with a greater frequency.

Thus, option C is correct.

To learn more about frequency, follow the link;

https://brainly.com/question/5102661

#SPJ2

166 g HCl

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Stoichiometry

Step 1: Define

[RxN - Unbalanced] Mg (s) + HCl (aq) → MgCl₂ (aq) + H₂ (g)

[RxN - Balanced] Mg (s) + 2HCl (aq) → MgCl₂ (aq) + H₂ (g)

[Given] 2.28 mol Mg (s)

Step 2: Identify Conversions

[RxN] 1 mol Mg = 2 mol HCl

Molar Mass of H - 1.01 g/mol

Molar Mass of Cl - 35.45 g/mol

Molar Mass of HCl - 1.01 + 35.45 = 36.46 g/mol

Step 3: Stoichiometry

Step 4: Check

Follow sig fig rules and round. We are given 3 sig figs.

166.258 g HCl ≈ 166 g HCl

Answer:

Low melting point

Explanation:

Transition metals have the following properties:

Conductivity (Electrical and Thermal)

Malleability (You can hit it with a hammer to mold it)

High melting point

Answer:

Low melting point

Explanation:

Most transition metals property is high melting point.

Given,

Mass of a rifle = 5.5 kg

Mass of a bullet = 11 g

Speed of a bullet = 1000 m/s

To find,

(a) The recoil velocity of the rifle.

(b) If the shooter holds the rifle firmly against his shoulder, What will be the recoil velocity.

Solution,

(a) Let v₁ is the recoil velocity of the rifle. We can use the conservation of momentum to find it. The momentum of the system will remains conserved.

[tex]m_1v_1=m_2v_2\\\\v_1=\dfrac{m_2v_2}{m_1}\\\\v_1=\dfrac{0.011\times 1000}{5.5}\\\\v_1=2\ m/s[/tex]

So, the recoil velocity of the rifle is 2 m/s and it is in opposite direction of he bullet.

(b) Let V is the recoil velocity if the shooter holds the rifle firmly against his shoulder. Again using the conservation of momentum.

[tex]V=\dfrac{0.011\times 1000}{120}\\\\v=0.091\ m/s[/tex]

Therefore, this is the required solution.

Answer:

The pan on the bottom right with the arrows pointing up.

Explanation:

conduction is the transfer of heat through touching surfaces, so when you place the pan on a hot stove, the heat heats up the bottom of the pan, and then the water in it.

The transfer of energy between systems through work is the expansion of gas in a steam engine. Therefore, the second diagram in the second row shows the correct direction of flow of heat.

Energy transfer is a phenomenon in which energy transfer from one matter to another matter. Energy can be transferred in two forms that are by doing work or by transferring heat.

Heat can be transferred by three ways conduction, convention and radiation. In conduction, when two object are in direct contact, transfer of molecules takes place. When heat flow through touching surfaces is called conduction. Heat flows in the upward direction from bottom in a pan.

Therefore, the second diagram in the second row shows the correct direction of flow of heat.

Learn more about energy transfer, here:

https://brainly.com/question/18649915

#SPJ6

Answer:

B. 9

Explanation:

The formula of the compound is given as:

            9NaCl

Coefficient is the number before the compound. The compound here is made up of sodium and chlorine.

Therefore, we have 9 as the coefficient and it is 9 moles of NaCl.

Note, NaCl is an ionic compound.

Answer:

Percent yield = 99.6%

Theoretical yield = 25.5 g

Explanation:

Given data:

Mass of copper = 12.5 g

Mass of copper(II) chloride produced = 25.4 g

Theoretical yield = ?

Percent yield = ?

Solution:

Chemical equation:

Cu + Cl₂       →        CuCl₂

Number of moles of copper:

Number of moles = mass/molar mass

Number of moles = 12.5 g / 63.5 g/mol

Number of moles = 0.19 mol

Now we will compare the moles of copper and copper chloride.

                  Cu          :           CuCl₂

                     1           :               1

                  0.19        :           0.19

Mass of CuCl₂: Theoretical yield

Mass = number of moles × molar mass

Mass = 0.19 mol × 134.45 g/mol

Mass = 25.5 g

Percent yield:

Percent yield = (actual yield / theoretical yield )×100

Percent yield  = ( 25.4 g/ 25.5 g) ×100

Percent yield = 99.6%

Answer: Western USA.

Answer:

the answer is the question itself

Explanation: