HELPPPPP ASP PLZZZZZ

Work Shown:

[tex]7x^2*\sqrt{2x^4}*6\sqrt{2x^{12}}\\\\7*6x^2*\sqrt{2x^4*2x^{12}}\\\\42x^2*\sqrt{4x^{4+12}}\\\\42x^2*\sqrt{4x^{16}}\\\\42x^2*\sqrt{(2x^8)^2}\\\\42x^2*(2x^8)\\\\42*2x^{2+8}\\\\84x^{10}\\\\[/tex]

So that's why the answer is choice C

The requirement that x is nonzero isn't technically necessary. The original expression simplifies to choice C even when x = 0 is the case. Also, we don't have issues such as division by zero errors that could arise. It's a bit curious why your teacher put in that condition.

Answer:

C.

Step-by-step explanation:

7x²×sqrt(2x⁴)×6×sqrt(2x¹²)

we see right away that as constant multiplication factor we have 7×6 = 42.

and then we get from each sqrt expression a sqrt(2), which leads to sqrt²(2) = 2 and therefore 42×2=84.

the only answer option with 84 is C.

now, to be completely sure, and to get some practice, let's look at the other parts :

sqrt(2x⁴) = sqrt(2)×sqrt(x⁴) = sqrt(2)×x²

sqrt(2x¹²) = sqrt(2)×sqrt(x¹²) = sqrt(2)×x⁶

=>

7x²×sqrt(2)×x²×6×sqrt(2)×x⁶ =7×6×2×x²×x²×x⁶ = 84x¹⁰

perfect. C is confirmed.

Answer:

9/10

Step-by-step explanation:

The first two digit number is 10 and the last is 99. That's a total of 99-10+1 numbers in all. That simplifies to 90. (Just like if we wanted to see how many numbers was 3,4,5, we would do 5-3+1=3 to get the total number.

Anyways, let's consider first how many 2 digjt numbers whose digits are equal. You have 11 22,33,44 55,66,77,88,99 which is 9 numbers total.

So the amount of 2 digits number whose digits differ is 90-9=81.

The probability that a 2 digit number have different digits is 81/90.

This can reduce. Divide top and bottom by 9 giving 9/10.

Answer:

[tex]M = \log(10000)[/tex]

Step-by-step explanation:

Given

[tex]M = \log(\frac{I}{I_o})[/tex]

[tex]I = 10000I_o[/tex] ---- intensity is 10000 times reference earthquake

Required

The resulting equation

We have:

[tex]M = \log(\frac{I}{I_o})[/tex]

Substitute the right values

[tex]M = \log(\frac{10000I_o}{I_o})[/tex]

[tex]M = \log(10000)[/tex]

The equation that calculates the magnitude of an earthquake with an intensity 10,000 times that of the reference earthquake is A. M = ㏒10000

Since the magnitude of an earthquake on the Richter sscale is M = ㏒(I/I₀) where

Since we require the magnitude when the intensity is 10,000 times the reference intensity, we have that I = 10000I₀.

So, substituting these into the equation for M, we have

M = ㏒(I/I₀)

M = ㏒(10000I₀./I₀)

M = ㏒10000

So, the equation that calculates the magnitude of an earthquake with an intensity 10,000 times that of the reference earthquake is A. M = ㏒10000

Learn more about magnitude of an earthquake here:

https://brainly.com/question/3457285

9514 1404 393

Answer:

Step-by-step explanation:

In the US, a decimal point is represented by a period. This value is interpreted as an integer with no fractional part, so the fractional part is zero:

 12,963.00

__

Some other places, a comma is used to identify the beginning of the decimal fraction. In that form, this number has a fractional part that has 3 as its thousandths digit. The value of 3 is less than 5, so the number is simply truncated at the hundredths place.

  12,96

If the thousandths digit were 5 or greater, then 1 hundredth would be added to the truncated number.

Answer:

7.3

Step-by-step explanation:

y=2.5x+5.8

=2.5×0.6+5.8

= 1.5+.8

=7.3

Answer:

B

Step-by-step explanation:

i did the test and it was correct, ur welcome

Answer:

I am pretty sure it is B.

Step-by-step explanation:

This is a line with a positive slope, therefore we can discard c and d.

the sign < will mean that the shaded in area will be on your right side.

Answer:

1) x+y=-2

x=-2-y

2) x-y=-8

substitude value of x

(-2-y)-y=-8

-2-2y=-8

-2y=-6

y=3

Substitute value of y in 1

x=-2-3

x=-5

Brainliest please~

Answer:

Point estimate = 76.4

Margin of Error = 2.680

Step-by-step explanation:

Given that distribution is approximately normal;

The point estimate = sample mean, xbar = 76.4

The margin of error = Zcritical * s/√n

Tcritical at 95%, df = 42 - 1 = 41

Tcritical(0.05, 41) = 2.0195

Margin of Error = 2.0195 * (8.6/√42)

Margin of Error = 2.0195 * 1.327

Margin of Error = 2.67989

Margin of Error = 2.680

Answer: Number 1 is 150

Step-by-step explanation: If you put 72 / 48% in your calculator, you will get your answer.

Answer:

Step-by-step explanation:

You need to put parentheses around the radicands.

√z · √(30z²) · √(35z³) = √(z·30z²·35z³)

= √(1050z⁶)

= √(5²·42z⁶)

= √5²√z⁶√42

= 25z³√42

The obtained expression would be 25z³√42 which is determined by the multiplication of the terms of expression.

A perfect Square is defined as an integer multiplied by itself to generate a perfect square, which is a positive integer. Perfect squares are just numbers that are the products of integers multiplied by themselves.

Arithmetic operations can also be specified by adding, subtracting, dividing, and multiplying built-in functions. The operator that performs the arithmetic operations is called the arithmetic operator.

* Multiplication operation: Multiplies values on either side of the operator

For example 4*2 = 8

We have been the expression as:

⇒ √z · √(30z²) · √(35z³)

Multiply and remove all perfect squares from inside the square roots

⇒ √(z·30z²·35z³)

⇒ √(1050z⁶)

⇒ √(5²·42z⁶)

Assume z is positive.

⇒ √5²√z⁶√42

⇒ 25z³√42

Therefore, the obtained expression would be 25z³√42.

Learn more about Arithmetic operations here:

brainly.com/question/25834626

#SPJ2

Answer:

x² - √3x / x² - 3

Step-by-step explanation:

To Do :-

Solution :-

We need to rationalize ,

Multiply numerator and denominator by x-√3 :-

Answer: Volume of Cylinder A is                          pi times the area of the base times the height

                                                             π r2 h = (3.1416)(4)(4)(15) = 753.98 ft3

Volume of Cylinder B is likewise             pi times the area of the base times the height

                                                             π r2 h = (3.1416)(6)(6)(7)   = 791.68 ft3

After pumping all of Cyl A into Cyl B

there will remain empty space in B         791.68 – 753.98 = 37.7 ft3  

The percentage this empty space is

of the entire volume is                            37.7 / 791.68 = 0.0476 which is 4.8% when rounded to the nearest tenth  

.

Step-by-step explanation: I hope that help you.

Note: you may not need to type in the percent sign.

===========================================================

Explanation:

Let's find the volume of water in container A.

Use the cylinder volume formula to get

V = pi*r^2*h

V = pi*5^2*8

V = 200pi

The full capacity of tank A is 200pi cubic feet, and this is the amount of water in the tank since it's completely full.

We have 200pi cubic feet of water transfer to tank B. We'll keep this value in mind for later.

-----------------------

Now find the volume of cylinder B

V = pi*r^2*h

V = pi*6^2*6

V = 216pi

Despite being shorter, tank B can hold more water (since it's more wider).

-----------------------

Now divide the results of each section

(200pi)/(216pi) = 200/216 = 25/27 = 0.9259 = 92.59%

This shows us that 92.59% of tank B is 200pi cubic feet of water.

In other words, when all of tank A goes into tank B, we'll have tank B roughly 92.59% full.

This means the percentage of empty space (aka air) in tank B at this point is approximately 100% - 92.59% = 7.41%

Then finally, this value rounds to 7.4% when rounding to the nearest tenth of a percent.

Answer:

4 is E, 5 is A

Step-by-step explanation:

4) Divide both sides by 5 to get |2x + 1| = 11, then solve for x to get 5 and -6.

5) Add 7 to both sides to get ½|4x - 8| = 10. Multiply both sides by 2 to get |4x - 8| = 20, then solve for x to get 7 and -3.

9514 1404 393

Answer:

  [tex]\displaystyle\sqrt{x+7}-\log{(x+2)}[/tex]

Step-by-step explanation:

It's pretty straightforward. You want ...

  f(x) - g(x)

Substituting the given function definitions gives ...

  [tex]\displaystyle\boxed{\sqrt{x+7}-\log{(x+2)}}[/tex]

Answer:

the second one

Step-by-step explanation:

it is not going in any general direction

Answer:

B

Step-by-step explanation:

Step-by-step explanation:

6 carpets=1month

10 carpets=?

1month=31 days

10 /6*31

51

Step-by-step explanatio

Answer:

0.19

Step-by-step explanation:

Jane bought a shoe for 54.82 euros

She gave the store owner 55 euros

= 55-54.82

= 0.18 euros to franc

= 0.18× 1.08222

= 0.19 franc

9514 1404 393

Answer:

  y = 16

Step-by-step explanation:

Perhaps you want to solve ...

  10 +√y = 14

  √y = 4 . . . . . . subtract 10

  y = 4² = 16 . . . square both sides

Step-by-step explanation:

|a+b|=✓(a²+b²)

|a|+|b|=a+b

||a+b|| ≤ ||a||+|b||

Answer:

dC=3.5

DC is between 3.475 and 3.525

Step-by-step explanation:

So let dx=1 since the change there is a change in 1 unit.

Find dC/dx by differentiating the expression named C.

dC/dx=0.05x+3

So dC=(0.05x+3) dx

Plug in x=10 and dx=1:

dC=(0.05×10+3)(1)

dC=(0.5+3)

dC=3.5

Let D be the change in cost-the triangle thing.

Since dx=1 we only want the change in unit to be within 1 in difference.

So this means we want it to be from x=9 to x=1] ot from x=10 to x=11.

Let's do from x=9 to x=10 first:

DC=C(10)-C(9)

DC=[0.025×10^2+3×10+4]-[0.025×9^2+3×9+4]

DC=[2.5+30+4]-[0.025×81+27+4]

DC=[36.5]-[2.025+31]

DC=[36.5]-[33.025]

DC=3.475

Now let's do from x=10 to x=11

DC=[0.025×11^2+3×11+4]-[0.025×10^2+3×10+4]

DC=[0.025×121+33+4]-[36.5]

DC=[3.025+37]-[36.5]

DC=[40.025]-[36.5]

DC=3.525

So DC, the change in cost where the change in unit is 1, is between 3.475 and 3.525.

Answer:

30%

Step-by-step explanation:

you just add 10% and 20%

Hope it helps c:

Zelina scored 32% higher on the third quiz than on her first quiz.

The Percentage is defined as representing any number with respect to 100. It is denoted by the sign %.

Given that:-

From the given data we will see that:-

1 ) Zelina scored 10% higher on her second quiz than on her first quiz.

SQ = 1.10 FQ

2 ) On her third quiz, Zelina scored 20% higher than on her second quiz

TQ = 1.20SQ

From the above to expression solve for the first quiz:-

TQ = 1.20 x  1.10 FQ

TQ = 1.32FQ

Therefore Zelina scored 32% higher on the third quiz than on her first quiz.

To know more about percentages follow

https://brainly.com/question/24304697

#SPJ2

Answer:

A. Increase speed to approximately 7.1 mph so that you cover the field more.

Step-by-step explanation:

The soil samples for the next field require more fertilizer coverage therefore there is need for more field coverage by the equipment. The speed of the tractor will be increase to 7.1 mph so that greater area can be covered in lesser time.

Answer:

14cm²

Step-by-step explanation:

3x2=6,

3x2=6,

2x1=2,

6+6+2=14 cm^2

Step-by-step explanation:

Here,

by formula a^2+b^2=(a+b)^2-2ab

so,

or,(a+b)^2-2ab

or,(73)^2-2×65

or,5329-126

=5203 is the answer

Answer:

10

Step-by-step explanation:

1. [tex]6^{2} + 8^{2} = c^{2}[/tex]

2 [tex]100 = c^{2}[/tex]

3. c = 10

Answer:

see explanation

Step-by-step explanation:

Using the identities

tan x = [tex]\frac{sinx}{cosx}[/tex] , sin²x = 1 - cos²x

sin2x = 2sinxcosx

Consider left side

cosθ × sin2θ

= [tex]\frac{sin0}{cos0}[/tex] × 2sinθcosθ ( cancel cosθ )

= 2sin²θ

= 2(1 - cos²θ)

= 2 - 2cos²θ

= right side , then established

Answer:

0.0016 = 0.16% probability that the lot will pass inspection.

Step-by-step explanation:

For each bulb, there are only two possible outcomes. Either it is defective, or it is not. The probability of a bulb being defective is independent of any other bulb, which means that the binomial probability distribution is used to solve this question.

Binomial probability distribution

The binomial probability is the probability of exactly x successes on n repeated trials, and X can only have two outcomes.

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

In which [tex]C_{n,x}[/tex] is the number of different combinations of x objects from a set of n elements, given by the following formula.

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

And p is the probability of X happening.

Sample of 18 light bulbs

This means that [tex]n = 18[/tex]

30% of the bulbs in the lot are defective.

This means that [tex]p = 0.3[/tex]

What is the probability that the lot will pass inspection?

It will pass inspection if there are no defective bulbs, that is, we have to find P(X = 0). So

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{18,0}.(0.3)^{0}.(0.7)^{18} = 0.0016[/tex]

0.0016 = 0.16% probability that the lot will pass inspection.

If one ball is selected at random, the odds for it being striped are 7 out of 15, or 7/15.

What do we know?

We know that there are 15 billiard balls.

We also know that balls numbered 1 through 8 are solid-colored, so we have 8 solid-colored balls.

And the other 7 balls are striped.

Now we want to find the probability for a randomly selected ball to be a striped ball.

Because all the balls have the same probability of being randomly selected, the probability of randomly selecting a striped ball is equal to the quotient between the number of striped balls (7) and the total number of balls (15).

Then we have:

P = 7/15 = 0.467

That quotient is also what is called the "odds"

So if one ball is selected at random, the odds for it being striped are 7 out of 15, or 7/15.

If you want to learn more, you can read:

https://brainly.com/question/23044118

Answer:

yeah, teachers kinda suck