Hi, so i have to find T1, can some1 help?

Answer:

so the acceleration of the body would be zero because there is no change in velocity

Answer:

a)density = mass /volume

b)to find volume put water into a container .measure the level of water , put the coins into the beaker containing water , measure the level of water again, subtract the new volume withe the first one . the result is the volume of coins

Answer:

[tex]P_b = \frac{\rho_b}{\rho_a} \ P_a[/tex]

Explanation:

The pressure at a depth of a fluid is

       P = ρ g y

where ρ is the density of the fluid, y the depth of the gauge measured from the surface of the fluid.

In this case the pressure for fluid A is

      Pa = ρₐ g y

the pressure for fluid B is

      P_b = ρ_b g y

depth y not changes as the gauge is stationary

if we look for the relationship between these pressures

       [tex]\frac{P_a}{P_b} = \frac{ \rho_a}{\rho_b}[/tex]

        [tex]P_b = \frac{\rho_b}{\rho_a} \ P_a[/tex]

therefore we see that the pressure measured for fluid B is different from the pressure of fluid A

if  ρₐ < ρ_b B the pressure P_b is greater than the initial reading

   ρₐ>  ρ_b the pressure in B decreases with respect to the reading in liquid A

Answer:

The percentage of people who wanted both the swimming pool and the soccer complex is 0.6 + 0.6 – 0.95 = 0.25. This can also be seen in the Venn diagram.

Explanation:

Edmentum

Answer:

About 37.70 radians.

Explanation:

1 revolution = 2[tex]\pi[/tex] radians

∴ 6 revolutions = (6)(2[tex]\pi[/tex] radians)

6 revolutions = 37.6991 or ≈ 37.70 radians

Answer:

heyaa thereeee

see temperature is rising in interval of

0 to 4 minutes

8 to 10 minutes

but 8 to 10 is NOT in options

so answer is option a) 0 to 4 minutes

:))))

Most of the time, "cell" means a battery, and if it gets disconnected, all voltage and current in the circuit goes away.  

I know this is a lame answer, but it kinda depends on what the cell was doing in the circuit, and what else is in the circuit besides the cell, and you haven't told us anything about these details, so that's really all we can guess.

Although your question is incomplete a general answer within the concept of your question is provided:    when the cell is disconnected from the Circuit the flow of voltage across the circuit will be halted.

A cell/battery is often used as a voltage source in electrical circuits, since the cell is a power source, when the cell is connected to a circuit the cell discharges some of its voltage to the components of the circuit ( such as capacitors ) to keep the circuit functional. so when the cell is disconnected from the circuit the flow of voltage is halted

Hence we can conclude that without a voltage source ( cell ) in a circuit there will be no flow of voltage across the components of the circuit.

learn more : https://brainly.com/question/16598952

Explanation:

Lasers produce a narrow beam of light in which all of the light waves have very similar wavelengths. The laser's light waves travel together with their peaks all lined up, or in phase. This is why laser beams are very narrow, very bright, and can be focused into a very tiny spot.

La energía que almacena el resorte cuando se comprime y estira 12 cm es 9,4 J.  

La energía potencial elástica del resorte se puede calcular con la siguiente ecuación:

[tex] E_{p} = \frac{1}{2}kx^{2} [/tex]

En donde:

k: es la constante del resorte = 1300 N/m

x: es la distancia de compresión o de elongación = 12 cm = 0,12 m

Dado que la energía es proporcional al cuadrado de la distancia recorrida por el resorte (x), la energía almacenada por el resorte durante la compresión será la misma que la energía almacenada por la elongación.

Por lo tanto, la energía almacenada es:

[tex]E_{p} = \frac{1}{2}kx^{2} = \frac{1}{2}1300 N/m*(0,12 m)^{2} = 9,4 J[/tex]                                                            

Entonces, la energía del resorte cuando se comprime y cuando se estira es la misma, a saber 9,4 J.                

Para saber más sobre energía potencial visita este link: https://brainly.com/question/156316?referrer=searchResults

Espero que te sea de utilidad!

Answer:

Al comprimirse o estirarse 12 centímetros desde su posición sin deformar, el resorte almacena 9,360 joules.

Explanation:

La Energía Potencial Elástica almacenada por el resorte ([tex]U_{e}[/tex]), en joules, se calcula a partir de la Ley de Hooke, la definición de Trabajo y el Teorema del Trabajo y la Energía, cuya expresión se presenta abajo:

[tex]U_{e} = \frac{1}{2}\cdot k\cdot (x_{f}^{2}-x_{o}^{2})[/tex] (1)

Donde:

[tex]k[/tex] - Constante elástica del resorte, en newtons por metro.

[tex]x_{o}[/tex] - Posición inicial del resorte, en metros.

[tex]x_{f}[/tex] - Posición final del resorte, en metros.

Nótese que el resorte sin deformar tiene una posición de cero, la tensión tiene un valor positivo y la compresión, negativo.

Asumiendo que en ambos casos el resorte se encuentra inicialmente sin deformar, se reduce (1) a una forma de función par, es decir, una función que cumple con la propiedad de que [tex]f(x) = f(-x)[/tex], se encuentra que al comprimirse o estirarse en la misma medida almacena la misma cantidad de energía.

La cantidad de energía a almacenar es:

[tex]U_{e} = \frac{1}{2}\cdot \left(1300\,\frac{N}{m} \right)\cdot (0,12\,m)^{2}[/tex]

[tex]U_{e} = 9,360\,J[/tex]

Al comprimirse o estirarse 12 centímetros desde su posición sin deformar, el resorte almacena 9,360 joules.

Answer:

Req = 564 Ω

Explanation:

The equivalent resistance between R1 and R2:

1/R =1/R1 + 1/R2

1/R =1/960 + 1/640

1/R = 1/384

R = 384

Now, the equivalent resistance between R and R3:

Req = 384 + 180

Req = 564 Ω

Answer:

the initial velocity of the car is 12.04 m/s

Explanation:

Given;

force applied by the break, f = 1,398 N

distance moved by the car before stopping, d = 25 m

weight of the car, W = 4,729 N

The mass of the car is calculated as;

W = mg

m = W/g

m = (4,729) / (9.81)

m = 482.06 kg

The deceleration of the car when the force was applied;

-F = ma

a = -F/m

a = -1,398 / 482.06

a = -2.9 m/s²

The initial velocity of the car is calculated as;

v² = u² + 2ad

where;

v is the final velocity of the car at the point it stops = 0

u is the initial velocity of the car before the break was applied

0 = u² + 2(-a)d

0 = u² - 2ad

u² = 2ad

u = √2ad

u = √(2 x 2.9 x 25)

u =√(145)

u = 12.04 m/s

Therefore, the initial velocity of the car is 12.04 m/s

Answer:

233.33°F

Explanation:

(385K - 273.15) * 9/5 + 32 = 233.33°F

Explanation:

Given:

t = 20 seconds

x = 3000 m

y = 450 m

a) To find the vertical component of the initial velocity [tex]v_{0y}[/tex], we can use the equation

[tex]y = v_{0y}t - \frac{1}{2}gt^2[/tex]

Solving for [tex]v_{0y}[/tex],

[tex]v_{0y} = \dfrac{y + \frac{1}{2}gt^2}{t}[/tex]

[tex]\:\:\:\:\:\:\:=\dfrac{(450\:\text{m}) + \frac{1}{2}(9.8\:\text{m/s}^2)(20\:\text{s})^2}{(20\:\text{s})}[/tex]

[tex]\:\:\:\:\:\:\:=120.5\:\text{m/s}[/tex]

b) We can solve for the horizontal component of the velocity [tex]v_{0x}[/tex] as

[tex]x = v_{0x}t \Rightarrow v_{0x} = \dfrac{x}{t} = \dfrac{3000\:\text{m}}{20\:\text{s}}[/tex]

or

[tex]v_{0x} = 150\:\text{m/s}[/tex]

Answer:

[tex]v=0.9833\ c[/tex]

Explanation:

The density changes means that the length in the direction of the motion is changed.

Therefore,

[tex]$\text{Density} = \frac{m}{lwh}$[/tex]

Given :

Side,  b = h = 0.13 m

Mass, m = 3.3 kg

Density = 8100 [tex]kg/m^3[/tex]

So,

[tex]$8100=\frac{3.3}{l \times 0.13 \times 0.13}$[/tex]

[tex]$l=\frac{3.3}{8100 \times 0.13 \times 0.13}$[/tex]

l = 0.024 m

Then for relativistic length contraction,

[tex]$l= l' \sqrt{1-\frac{v^2}{c^2}}$[/tex]

[tex]$0.024= 0.13 \sqrt{1-\frac{v^2}{c^2}}$[/tex]

[tex]$0.184= \sqrt{1-\frac{v^2}{c^2}}$[/tex]

[tex]$0.033= 1-\frac{v^2}{c^2}}$[/tex]

[tex]$\frac{v^2}{c^2}= 0.967$[/tex]

[tex]$\frac{v}{c}=0.9833$[/tex]

[tex]v=0.9833\ c[/tex]

Therefore, the speed of the observer relative to the cube is 0.9833 c (in the units of c).

Answer:

download the pdf

Explanation:

[tex]\boxed{\sf 1°C=273K}[/tex]

Sol:-1

[tex]\\ \sf\longmapsto 30°C[/tex]

[tex]\\ \sf\longmapsto 273+30[/tex]

[tex]\\ \sf\longmapsto 303K[/tex]

Sol:-2

[tex]\\ \sf\longmapsto 50°C[/tex]

[tex]\\ \sf\longmapsto 50+273[/tex]

[tex]\\ \sf\longmapsto 323K[/tex]

Answer:The radioactive waste

Explanation:Fission is the splitting of a heavy unstable nucleus into two Lighter nuclei

Answer:

Fetal Hb binds oxygen more tightly than adult Hb (not option a)

Check attached photo

Check attached photo

Answer:

Solution

Verified by Toppr

Correct option is

C

3 cm

RI=apparent depthreal depth

Substituting, 34=apparentdepth12

Therefore, apparent depth=412×3=9

The height by which it appears to be raised is 12−9=3cm

Was this answer helpful?

71

0

SIMILAR QUESTIONS

A coin is placed at the bottom of a glass tumbler and then water is added. It appeared that the depth of the coin has been reduced because

Medium

View solution

>

A tank is filled with water to a height of 12.5 cm. The apparent depth of a needle lying at the bottom of the tank is measured by a microscope to be 9.4 cm. What is the refractive index of water? If water is replaced by a liquid of refractive index 1.63 up to the same height, by what distance would the microscope have to be moved to focus on the needle again?

Answer:

Electric generator is the device that converts mechanical energy into electrical energy

Answer:

The smallest and largest areas could be 6400 m and 7500 m, respectively.

Explanation:

The area of a rectangle is given by:

[tex] A = l*w [/tex]

Where:

l: is the length = 100 m

w: is the width

We can calculate the smallest area with the lower value of the width.

[tex] A_{s} = 100 m*64 m = 6400 m^{2} [/tex]                            

And the largest area is:

[tex] A_{l} = 100 m*75 m = 7500 m^{2} [/tex]  

Therefore, the smallest and largest areas could be 6400 m and 7500 m, respectively.            

I hope it helps you!                        

Answer:

the largest areas that the field could be is [tex]A_l[/tex]=7587.75 m

the smallest areas that the field could be is [tex]A_s[/tex]=6318.25 m

Explanation:

to the find the largest and the smallest area of the field measurement error is to be considered.

we have to find the greatest possible error, since the measurement was made nearest whole mile, the greatest possible error is half of 1 mile and that is 0.5m.

therefore to find the largest possible area we add the error in the mix of the formular for finding the perimeter with the largest width as shown below:

[tex]A_l[/tex]= (L+0.5)(W+0.5)

(100+0.5)(75+0.5) = (100.5)(75.5) = 7587.75 m

To find the smallest length we will have to subtract instead of adding the error factor value of 0.5 as shown below:

[tex]A_s[/tex]= (L-0.5)(W-0.5)

(100-0.5)(64-0.5) = (99.5)(63.5) = 6318.25 m

The intensity of radiation is the defined as amount of energy per surface angle which can be used to determine the amount of energy emitting from a source that will hit another surface.

The factors that affect the intensity of radiation are

Type of emission from the source :This  can be alpha, gamma, beta or electromagnetic rays etc

Distance of the detector from the source: The shorter the distance between the source and the detector, the more the effect and vice versa for the longer the distance.

Type of materials between the source and the detector: The type of material between the source and the detector will tell how absorbing and penetrating the radiation is.

Read more on Radiation Intensity here:  https://brainly.com/question/10148635

Answer:

c) charges exert forces on other charges.

Explanation:

When two different materials are rubbed together, there is a transfer of electrons from one material to the other material so this causes one object to become positively charged and the other object is negatively charged so they will attract each other not repel each other. Charges exert forces on other charges i.e. opposite charges attract each other whereas similar charges repel each other so in both cases force are exerted on one another.

Answer:

The answer is "Option B".

Explanation:

[tex]r=15\times 10^{7}\ km\ = 15\times 10^{10}\ m\\\\w=\frac{2\pi}{1\ year}\\\\=\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec}\\\\a=w^2r\\\\=(\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec})^2 \times 15 \times 10^{10}\ \frac{m}{s^2}\\\\[/tex]

[tex]=5.940 \times 10^{-3} \ \frac{m}{s^2}\\\\=6 \times 10^{-3} \ \frac{m}{s^2}\\\\=0.006\ \frac{m}{s^2}\\\\[/tex]

Answer:

300J

Explanation:

Work done = Force x the distance travelled in the direction of the force

=300 x 1

=300J

Answer:

approaches infinity

Explanation:

There are two momentums, the classical momentum which is equal to the product of mass and velocity, and the relativistic momentum, the one we should look at when we work with high speeds, and this happens because massive objects have a speed limit, in this case, we are approaching the speed of light, so we need to work with the relativistic momentum instead of the classical momentum.

The relativistic momentum can be written as:

[tex]p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

where

u = speed of the object relative to the observer, in this case we have that u tends to c, the speed of light.

m = mass of the object

c = speed of light.

So, as u tends to c, we will have:

[tex]\lim_{u \to c} p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

Notice that when u tends to c, the denominator on the first term tends to zero, thus, the relativistic momentum of the object will tend to infinity.

Then the correct option is infinity, as the particle speed approaches the speed of light, the relativistic momentum of the particle tends to infinity.

Answer:

it becomes a p-type conductor

Explanation:

answer from gauth math