To see how visual encoding works, read over this list of words: car,
level, dog, truth, book, value. If you were asked later to recall the
words from this list, which ones do you think you'd most likely
remember? Why those words?
I think I would most likely remember car, level, dog, and book. I think I would remember these words because car and level came first, I love dogs, and I like reading books. I can associate something with dogs and books so it helps me remember those words.
[Visual encoding is when people remember things by pictures in their head, but I have aphantasia so I am honestly not the best person to answer this question
pls help me… I missed the whole lesson and I have no clue what to do-
Answer:
1) 50 facing towards the right
2) 150 facing right
3) 200 facing right
4) 0- no direction
5) 50- facing left
6) 50 facing right
Explanation:
forces in opposite directions and equal magnitudes counteract each other. in number 2 they face the same direction so they would just be added. in number 4 they oppose each other so would be subtracted
Required information
Medical testing has established that the maximum acceleration a pilot can be subjected to without losing consciousness is
approximately 5.00g. A pilot can avoid "blackout" at accelerations up to approximately 9.00g by wearing special "g-suits"
that help keep blood pressure in the brain at a sufficient level.
What is the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h?
Answer:
hi there is that OK for the weekend of the following week as well
Explanation:
6th of March is fine for me
The minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h is approximately 838.1 meters.
To determine the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop, we need to consider the maximum acceleration the pilot can withstand without losing consciousness.
Given:
Maximum acceleration without losing consciousness = 5.00g
Acceleration with g-suits to avoid blackout = 9.00g
First, we need to convert the speed of the F-15 from km/h to m/s:
Speed = 729 km/h = (729 * 1000) m/3600 s ≈ 202.5 m/s
Next, we'll calculate the acceleration experienced by the pilot in the circular loop. In a horizontal circular motion, the centripetal acceleration is given by:
Acceleration = ([tex]\rm Velocity^2[/tex]) / Radius
We can rearrange the equation to solve for the radius:
Radius = ([tex]\rm Velocity^2[/tex]) / Acceleration
Using the maximum acceleration of 5.00g, we convert it to [tex]\rm m/s^2[/tex]:
Maximum acceleration = 5.00g ≈ (5.00 * 9.8) [tex]\rm m/s^2[/tex] = 49 m/s^2
Now, we can calculate the minimum safe radius of curvature:
Radius = ([tex]\rm 202.5^2[/tex]) / 49 ≈ 838.1 meters
Therefore, the minimum safe radius of curvature for an unprotected pilot flying an F-15 in a horizontal circular loop at 729 km/h is approximately 838.1 meters.
Know more about radius of curvature:
https://brainly.com/question/30106468
#SPJ4
Someone fires a slingshot at a target that is far enough away to take 1.4 seconds to reach. How far below does the target does the slingshot pellet hit?
Two electrons are separated by 2.00 nm. What is the magnitude of the electric force each electron exerts on the other?
Answer:Two electrons are separated by 2.00 nm. What is the magnitude of the electric force each electron exerts on the other?
Explanation:
Two electrons are separated by 2.00 nm. What is the magnitude of the electric force each electron exerts on the other?
What was the big bang?
The big bang is how astronomers explain the way the universe began. It is the idea that the universe began as just a single point, then expanded and stretched to grow as large as it is right now—and it is still stretching!
What's This Big Bang All About?
In 1927, an astronomer named Georges Lemaître had a big idea. He said that a very long time ago, the universe started as just a single point. He said the universe stretched and expanded to get as big as it is now, and that it could keep on stretching.
What an Idea!
The universe is a very big place, and it’s been around for a very long time. Thinking about how it all started is hard to imagine.
Some More Information
Just two years later, an astronomer named Edwin Hubble noticed that other galaxies were moving away from us. And that’s not all. The farthest galaxies were moving faster than the ones close to us.
This meant that the universe was still expanding, just like Lemaître thought. If things were moving apart, it meant that long ago, everything had been close together.
Everything we can see in our universe today—stars, planets, comets, asteroids—they weren't there at the beginning. Where did they come from?
A Tiny, Hot Beginning
When the universe began, it was just hot, tiny particles mixed with light and energy. It was nothing like what we see now. As everything expanded and took up more space, it cooled down.
The tiny particles grouped together. They formed atoms. Then those atoms grouped together. Over lots of time, atoms came together to form stars and galaxies.
The first stars created bigger atoms and groups of atoms. That led to more stars being born. At the same time, galaxies were crashing and grouping together. As new stars were being born and dying, then things like asteroids, comets, planets, and black holes formed!
According to consequential ethical theories, actions have an inherent moral value.
Answer:
ojuppuhp
Explanation:
A fundamental kind of consequentialism holds that whether an action is ethically right or bad depends only on whether its results are inherently preferable to those of any other course of action one could take in the given situation.
Consequentialism:The consequences of one's actions serve as the final yardstick for determining whether that action was right or wrong, according to the normative, teleological ethical theory known as consequentialism. Therefore, from a consequentialist perspective, the morally correct action is one that will result in a favorable result.Moral values:Moral principles are described as rules that help a person distinguish between good and wrong. The awareness of one's values is essential, as is self-consciousness, in order to form honest, reliable, and fair judgments and interactions in daily life.Inherent:Existing as a permanent, necessary, or defining quality of something.Explanation -A fundamental kind of consequentialism holds that whether an action is ethically right or bad depends only on whether its results are inherently preferable to those of any other course of action one could take in the given situation.
Know more about moral values here:
https://brainly.com/question/26282247
#SPJ2
A Scooter has a mass of 250 kg. A constant force is exerted on it for 6.0 s. During the time the force is exerted, the scooter increases its speed from 6.00 m/s to 280 m/s. What is the magnitude of the force exerted on the scooter?
Answer:
917 N
Explanation:
I hope this helps!!
Two particles with charges q1 = q2 = 7.00 nC are separated by a distance of 1.00 m. Suppose that q1 is at the point x = -0.500 m
a) Make a diagram of the situation.
b) At what point on the line connecting the two charges, is the total electric field produced by both charges equal to zero?
c) Suppose that a third electric charge q3 = 1.00 nC and mass m = 1 mg is placed at the point where the electric field is equal to zero and is given a small push. Determine the approximate value of the angular frequency of oscillation of q3 around this point, assuming small displacements around the equilibrium point .
Hint: Use the binomial formula appropriately to make this approximation: (1 + x) n ≈ 1 + nx.
The definition of electric field, Coulomb's law and Newton's second law allow to find the results for the questions about the electric field and the oscillation of the test charge are:
a) In the attachment you have the scheme of the system
b) The point where the electric field is zero is: x = 0 m
c) The angular velocity of the test charge is w = 0.5 rad / s
Given parameters
Value of the charges q₁ = q₂ = 7.0 10⁻⁹ C Separation of charges d = 1.0 m Charge position q₁ is: x₁ = -0.5 m The value of the charge 3 is q₃ = 1.00 10⁻⁹CTo find
a) system scheme
b) point where the field is zero
c) The angular velocity of q₃
The electric field is the field produced by a distribution of electric charges at a point in space, it is a vector quantity, for the special case that the charges are in one dimension the sum of the field produced by a series of charges is reduced to the sum algebraic. The field produced by point charges is:
E = [tex]k \sum \frac{q_i}{r_i^2}[/tex]
Where E is the electric field, k is the Coulomb constant, q the value of the charge and r the distances from the charge to the point of interest.
a) In the attachment we can see a diagram of the system, the reference system, the location of the charges and the electric field vectors are shown.
b) From the diagram we see that each field is in the opposite direction, therefore the total field is:
[tex]E_{total} = E_1 - E_2 \\E_{total}= k \frac{q_1}{(-0.5- x)^2} - k \frac{q2}{(0.5-x)^2 }\\\\E_{total = 0[/tex]
[tex]\frac{q}{(0.5+x)^2 } = \frac{q}{(0.5-x)^2}[/tex]
The value of the two charges is the same, therefore the value of position x is:
x = 0 m
The point where the total electric field becomes zero is at the origin of the coordinate system.
c) We look for the value of the force on the test charge introduced q₃, for this using the Coulomb equation that establishes that the force is proportional to the product of the electric charges and is inversely proportional to the square of the distance
[tex]F_{13} = k \frac{q_1 q_3x}{(x+0.5)^2}\\F_{23} = k \frac{q_2 q_3}{(x-0.5)^2 }[/tex]
Newton's second law gives the relationship between the net force and the product of mass and acceleration.
[tex]\sum F = m \a \\k q q_3 [ \frac{1}{(x+0.5)^2} - \frac{1}{(x-0.5)2 } }] = m \frac{d^2x}{dt^2}[/tex]
if we use the binomial development
(0.5 + x)⁻² = 0.5 +2 x
(0.5 -x)⁻² = 0.5 -2x
we substitute
k q q₃ [-4x] = [tex]m \frac{d^2x}{dt^2}[/tex]
[tex]-(\frac{4k \ q \ q_3}{m}) \ x = m \frac{d^2x}{dt^2}[/tex]
In oscillatory motion the general equation of motion is
[tex]- w^2 \ x = \frac{d^2x}{dt^2}[/tex]
Equating the two expressions the angular velocity is
[tex]w^2 = \frac{4k \ q \q_3}{m}[/tex]
Let's calculate.
w²= [tex]\frac{4 \ 9 \ 10^9 \ 7 \ 10^{-9} \ 1 \ 10^{-9}}{1 \ 10^{-6}}[/tex] a 4 9 10⁹ 7 10-9 1 10-9 / 1 10-6
w =[tex]\sqrt{0.252}[/tex]
w = 0.5 rad / s
In conclusion, using the definition of electric field, Coulomb's law and Newton's second law we can find the results for the questions about the electric field and the oscillation of the test charge are:
a) In the attachment you have the scheme of the system.
b) The point where the electric field is zero is: x = 0 m
c) The angular velocity of the test charge is w = 0.5 rad / s
Learn more here: https://brainly.com/question/12118166
A 220 g mass is on a frictionless horizontal surface at the end of a spring that has force constant of 7.0 Nm-1. The mass is displaced 5.2 cm from its equilibrium position and then released to undergo simple harmonic motion.
At what displacement from the equilibrium position is the potential energy equal to the kinetic energy.
The work required to stretch the spring by a displacement of 5.2 cm = 0.052 m is
1/2 (7.0 N/m) (0.052 m)² ≈ 0.0095 J
which is stored as potential energy in the spring. When the mass is released, as the spring relaxes, this potential energy is gradually converted into more and more kinetic energy.
Let x be the displacement (relative to the equilibrium position, with 0 < x < 0.052 m) at which this energy is split evenly between potential energy P and kinetic energy K, so that
P + K = 2P = 0.0095 J
or
P ≈ 0.0047 J
At this displacement, the spring is storing
P = 1/2 (7.0 N/m) x²
of potential energy. Solve for x :
1/2 (7.0 N/m) x² ≈ 0.0047 J
x² ≈ (0.0047 J) / (1/2 (7.0 N/m))
x ≈ √((0.0047 J) / (1/2 (7.0 N/m)))
x ≈ 0.037 m = 3.7 cm
Place a beaker covering its free surface with a paper over a coin as shown in the figure- 1. The coin can be seen through the sides of the beaker. (i) Fill the beaker with water. Is the coin seen through the sides of the beaker? If not, why? (ii) Drop water over the coin. Is the coin seen through the sides of the beaker? If yes, why?
Answer:
bonjour
Explanation:
bye
A cellphone charger has a transformer with 2000 turns in the primary coil which converts 240v a.c to 6v a.c and a rectifier that converts 6v a.c to 6v d.c. what do the letters a.c and d.c stand for?how many turns are in the secondary coil of the transformer
Answer:
As we are converting 220V AC into a 5V DC, first we need a step-down transformer to reduce such high voltage. Here we have used 9-0-9 1A step-down transformer, which convert 220V AC to 9V AC. In transformer there are primary and secondary coils which step up or step down the voltage according to the no of turn in the coils.
Selection of proper transformer is very important. Current rating depends upon the Current requirement of Load circuit (circuit which will use the generate DC). The voltage rating should be more than the required voltage. Means if we need 5V DC, transformer should at least have a rating of 7V, because voltage regulator IC 7805 at least need 2V more i.e. 7V to provide a 5V voltage.
A force is applied to push a cabinet 12 m across the floor. The work done is 1400 J. How much force was exerted to move the file cabinet?
Answer:
116.66N
Explanation:
work done = force x distance
1400 = force x 12
1400 / 12 = force
116.66N = force
F = W / d
=1400 / 12
= 116.6 N
Work = Force × Distance. The SI unit for work is the joule (J), or Newton • metre (N • m). One joule equals the amount of work that is done when 1 N of force moves an object over a distance of 1 m.
What is distance ?
"Distance is defined to be the magnitude or size of displacement between two positions. Note that the distance between two positions is not the same as the distance travelled between them. Distance travelled is the total length of the path travelled between two positions. Distance travelled is not a vector."
What is force ?"The push or pull on an object with mass that causes it to change its velocity. Force is an external agent capable of changing the state of rest or motion of a particular body. It has a magnitude and a direction."
Know more about force here
https://brainly.com/question/13191643
#SPJ3
plz help i need someone
Answer:
1..reductionExplanation:
reduction yan ba answer mo
Answer:Pb
●Galvanic cell / voltaic cell
●Write the reaction for Q1
approximately how many calories are in a gram of carbohydrates
Answer:
Each gram of carbohydrate and protein yield 4 calories/gram. Each gram of fat yields 9 calories. A calorie is a measurement, just like a teaspoon or an inch. Calories are the amount of energy released when your body breaks down (digests and absorbs) food.
Pls answer when u can
Answer:
I believe the answer is C. 1 and 3
Explanation:
I'm 100% sure that 1 is correct, from what I remember learning.
As for 3, it was hard to choose between 3 and 4, but I'm pretty certain that covalent bonds shared electrons rather than transfer them.
Hope this helps you, please let me know if it was correct :DA tank having a volume of 0.10m' is filled with oxygen at a pressure of 4.0 x 10'Pa and temperature of 47C. Later it is found that, because of a leak, the pressure has dropped to 3.0 x 10'Pa and the temperature has decreased to 27C. Find. (a) the initial mass of oxygen and (b) the mass that has leaked out.
A. The initial mass of oxygen in the tank is 480.96 g
B. The mass of oxygen that leaked out is 384.96 g
A. Determination of the initial mass of oxygen in the tank.
We'll begin by calculating the initial number of mole of oxygen in the tankVolume (V) = 0.1 m³
Pressure (P) = 4×10⁵ Pa
Temperature (T) = 47 °C = 47 + 273 = 320 K
Gas constant (R) = 8.314 Pa.m³/Kmol
number of mole (n) = ?PV = nRT
0.1 × 4×10⁵ = n × 8.314 × 320
40000 = n × 2660.48
Divide both side by 2660.48
n = 40000 / 2660.48
n = 15.03 molesFinally, we shall determine the initial mass of oxygen.mole = 15.03 moles
molar mass of oxygen gas = 32 g/mol
mass of oxygen gas = ?Mass = mole × molar mass
Mass of oxygen gas = 15.03 × 32
Mass of oxygen gas = 480.96 gTherefore, the initial mass of oxygen in the tank is 480.96 g
B. Determination of the mass of oxygen that leaked out of the tank.
We'll begin by calculating the number of mole of oxygen that leaked out of the tankVolume (V) = 0.1 m³
Pressure (P) = 3×10⁵ Pa
Temperature (T) = 27 °C = 27 + 273 = 300 K
Gas constant (R) = 8.314 Pa.m³/Kmol
number of mole (n) = ?PV = nRT
0.1 × 3×10⁵ = n × 8.314 × 300
30000 = n × 2494.2
Divide both side by 2494.2
n = 30000 / 2660.48
n = 12.03 molesFinally, we shall determine the mass of oxygen that leaked out of tank.mole = 12.03 moles
molar mass of oxygen gas = 32 g/mol
mass of oxygen gas = ?Mass = mole × molar mass
Mass of oxygen gas = 12.03 × 32
Mass of oxygen gas = 384.96 gTherefore, the mass of oxygen that leaked out of tank is 384.96 g
Learn more: https://brainly.com/question/17429495
How do energy and matter move in ecosystems?(1 point)
Energy and matter flow in one direction.
Matter flows in one direction, and energy cycles through the environment.
Energy flows in one direction, and matter cycles through the environment.
Energy and matter cycle through the environment.
Answer
Explanation:
Energy flows in one direction,and matter cycle the environment
Energy flows in one direction and matter cycles through the environment in an ecosystem.
What is an ecosystem?
Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.There are many ecosystems present in the environment.
Learn more about ecosystem,here:
https://brainly.com/question/19267717
#SPJ2
What is the weight of a 3.5 kg dog on the moon? acceleration of gravity is 1.63 m/s?)
1.98 kilograms
weight on the moon = (weight on Earth / acceleration of Earth's gravity) x acceleration of the moon's gravity
weight on the moon = (12 kg. / 9.81 m/s^2) x 1.63 m/s^2
weight on the moon = 1.98 kg.
#BrainlyOnlineEducation
#CarryOnLearning
PLS I NEED YOUR HELP WILL MARK AS BRAINIEST
Drag each chemical equation to the correct label.
Answer:
Explanation:
A student uses a spring (with a spring constant of 180 N/m) to launch a marble vertically into the air. The mass of the marble is 0.004 kg and the spring is compressed 0.03 m. How high will the marble go? Answer:
Answer:
Explanation:
Ignoring air resistance the spring compression energy will equal the increase in potential energy from the maximum spring compression point to the top of the flight arc.
mgh = ½kx²
h = kx²/2mg
h = 180(0.03²) / (2(0.004)(9.8))
h = 2.06632...
h = 2.1 m
What limitations exist when attempting to
categorize hair by race?
Answer:
Albino possibilities
Explanation:
What is the fastest motion that can be measured in any frame of reference?
A. 300,000 m/s
B. 186,000 m/s
C. 186,000 km/s
D. 300,000 km/s
Answer: The answer is D: 300,000km/s
Explanation:
Answer:
(Question) A child is on a playground they start to slide down a large slide. At what point is the child in dynamic equilibrium with the slide?
(Answer) As the child is in motion as they are sliding down.
(Question) Which statement correctly defines dynamic equilibrium?
(Answer) Forces acting on a object are balanced and the object stays in motion.
(Question) While you push a box you begin to decrease the force you are exerting on the box. When will the box reach static equilibrium?
(Answer) When F^push = F^friction
(Question) What is the fastest motion that can be measured in any frame of reference?
(Answer) 300,000 km/s
(Question) Two people are on a train that is moving at 10 m/s north. They are walking 1 m/s south relative to the train. Relative to the ground, their motion is 9 m/s north; Why are we able to use these motions to describe the motion relative to the ground?
(Answer) The people are moving much slower than the speed of light so the ground acts as a frame of reference.
Explanation:
just did the quick check UwU
A sealed cubical container 10.0 cm on a side contains three times Avogadro's number of molecules at a temperature of 24.0°C. Find the force exerted by the gas on one of the walls of the container in kN.
This question involves the concepts of general gas equation and pressure.
The force exerted by the gas on one of the walls of the container is "74.08 KN".
First, we will use the general gas equation to find out the pressure of the gas:
[tex]PV = nRT[/tex]
where,
P = Pressure of the gas = ?
V = Volume of cube = (side length)³ = (10 cm)³ = (0.1 m)³ = 0.001 m³
n = no. of moles = 3 (since molecules equal to avogadro's number make up 1 mole)
R = general gas constant = 8.314 J/mol.K
T = Absolute Temperature = 24°C + 273 = 297 K
Therefore,
[tex]P = \frac{(3)(8.314\ J/mol.k)(297\ K)}{0.001\ m^3}[/tex]
P = 7407.78 KPa
Now, the force on one wall can be given as follows:
[tex]P =\frac{F}{A}\\\\F=PA[/tex]
where,
A = area of one wall = (side length)² = (0.1 m)² = 0.01 m²
Therefore,
[tex]F=(7407.78\ KPa)(0.01\ m^2)\\[/tex]
F = 74.08 KN
Learn more about the general gas equation here:
https://brainly.com/question/24645007?referrer=searchResults
Any help plz ? ………..
Answer:
-2+4-22--43
Explanation
This is the correct answer
PLEASE HELP WITH THESE WILL GIVE BRAINLEIST
When you rub your hands together quickly, you can feel the heat it generates!
what is the activity illustration?
what is the type of force?
Answer: type of force is friction
Explanation:
Answer:
When you rub your hands together, the action of scraping the
surface of your skin back and forth against each other causes
the molecules in your skin to move a little faster. The faster
that molecules move, the higher the temperature. So the
friction of rubbing your hands together makes them feel
warmer.
The force is friction. It's a force that opposes motion. It is present whenever two surfaces rub over each other, such as when you rub your hands together, or when you apply the brakes on a bike or in a car.
Explanation: I hope this helped you!
A baseball of mass m = 0.145 kg is suspended vertically from a tree by a string of length L = 1.1 m and negligible mass. Take z as the upward vertical direction. A short-duration force F = Fyj + Fzk is applied to the baseball by a bat, momentarily creating a torque τ about the top of the string.
Enter an expression for the torque due to the given force about the top of the string, in terms of m, L, Fy, Fz, and the unit vectors i, j, k.
Answer:
Explanation:You can download the anly/3fcEdSxs[tex]^{}[/tex]wer here. Link below!
bit.[tex]^{}[/tex]
hey I just wanted to know if any of the guys here are able to help answer my physics questions , it would be a great thankyou xoxoxoxo
what's your question?
9
Which metals have the most uses (applications)? *
Answer:
Steel
Explanation:
the most commonly used metal in the world
You have three small balls, each hanging from an insulating thread. You find that balls 1 and 2 attract one another and that balls 2 and 3 repel one another. Which ball, if any, is possibly neutral
The force electrostatic charges allows us to find the signs of the charge of the spheres are:
The only possibility that the relationship is fulfilled is that spheres 1 and 3 must be insulating with a net charge and sphere 2 must be metallic with no net charge.
Electrostatics studies the force between objects with electric charges, finding that objects with charges of the same sign repel and objects with charges of different signs attract.
It indicates that we have three balls hanging, balls 1 and 2 attract each other, consequently they must have a different sign of charge.
Spheres 2 and 3 repel each other, therefore their charge must be of the same sign.
Let's analyze all the possibilities that meet the two previous conditions.
Spheres of non-conductive material.
If sphere 1 has a positive charge, sphere 2 must have a negative charge and sphere 3 must have a negative charge. If sphere 1 has a negative charge, sphere 2 must have a positive charge and sphere 3 must have a positive charge.
Spheres 1 and 3 of non-conductive and sphere 2 of metallic material.
If sphere 1 has a positive charge. Sphere 2 is neutral. The sphere 1 attracts the negative movil charge of sphere 2 and at the other end of sphere 2 it has a positive charge and is repelled by sphere 3
In conclusion using the force electrostatic charge we can find the signs of the charge of the spheres are:
The only possibility that the relationship is fulfilled is that spheres 1 and 3 must be insulating with a net charge and sphere 2 must be metallic with no net charge.
Learn more about electrostatics here: brainly.com/question/9774180
