Answer:
50 g
Explanation:
Please brainiest
What is a disadvantage of geothermal energy
Answer:
it runs the risk of triggering earthquakes. releases harmful gases
A sample of methane gas collcted t a pressure of 0.0884 atm and a temperature of 6.00 C is found to occupy a volume of 26.5 L. How many moles of CH4 gas are in the sample? ____ mol
Answer:
0.1mole
Explanation:
Given parameters:
Pressure = 0.0884atm
Temperature = 6°C = 6 + 273 = 279K
Volume occupied = 26.5L
Unknown:
Number of moles = ?
Solution:
To solve this problem, we are going to use the ideal gas equation:
PV = nRT
P is the pressure
V is the volume
n is the number of moles
R is the gas constant = 0.082atmLmol⁻¹k⁻¹
T is the temperature.
Insert the parameters and solve for n;
0.084 x 26.5 = n x 0.082 x 279
n = 0.1mole
How can you ensure the chemical reaction produces the right amount of heat in a hot pack without hurting you?
Answer:
Heat packs that contain iron and water packets: Exposing the solution to air results in the oxidation of the iron (creates rust). The oxidation of the iron is an exothermic process. Heat packs that contain supersaturated sodium acetate: These are reusable, the packs are boiled to dissolve sodium acetate.
Explanation:Thanks for asking question
Sally is building a list of the types of matter that have energy. She includes liquids on her list because she can see that liquids flow. Is her list complete?
a. yes, her list with just liquids on it is complete
b. no, she should add only gases to her list
c. no, she should add only solids to her list
d. no, she should add gases and solids to her list
Answer:
I just looked up the types of matter energy has.
Explanation:
I believe the answer is D.
Sally's list of matter that have energy is not complete as all the types of matter have energy as all matter have mass , and mass and energy are related, so she should have added gases and solids to her list.
What is matter?Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it has volume .Matter is composed up of atoms which may or not be of the same type.
Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states such as solids, liquids and gases depending on the conditions of temperature and pressure.
The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.
Learn more about matter,here:
https://brainly.com/question/13556931
#SPJ2
Can someone help
Me out pls if your good at chemistry
Help Please with this
Approximately how long does it take for the moon's phases to change from a NEW moon to a FULL moon?
1 week
3 weeks
2 weeks
4 weeks
Answer:
4 weeks
Explanation:
It takes 4 weeks for the cyclle to be happening again
Observe the image of sodium. List the properties you see.
Answer:
It is soft and white. It has a low melting and boiling point, a good conductor electricity, and reacts with water. Furthermore, it is also highly reactive, malleable, and ductile.
Explanation:
Hope I helped!
Answer:
silvery-white and waxy
Explanation:
Properties means the observations you can make just by looking at it or the qualities that the object has.
So when I looked at the sodium I saw a silvery-white metal (sodium is a metal), that has this waxy appearance to it.
I neeeeeeeeed help you within 30 min
Answer:
The answers to your question are given below
Explanation:
The equation for the reaction is given below:
2KClO₃ —> 2KCl + 3O₂
The total number of each atoms present in the reactants and products can be obtained by doing a head count as illustrated below:
Reactants >>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 2 × 3 = 6
Products >>>>>>> Number of atoms
Potassium (K) >>> 2 × 1 = 2
Chlorine (Cl) >>>> 2 × 1 = 2
Oxygen (O) >>>>> 3 × 2 = 6
Turning on your X-Box is an example of___ energy turning into ___ energy.
A.electrical,nuclear
B.nuclear,sound
C.electrical,light
D.electrical,chemical
Answer:
electrical --> light
Explanation:
what elements comprise the largest portion of Earth's atmosphere?
Answer:
Nitrogen and Oxygen make up 99% of the Earths atmosphere. Then Argon makes up the rest of the atmosphere.
Is luster a chemical or physical change? (Worth 50 POINTS!)
Answer:
It is a Physical change, have a great day :)
Explanation:
A chemical change is a permanent change. A Physical change affects only physical properties i.e. shape, size, etc. ... Some examples of physical change are freezing of water, melting of wax, boiling of water, etc. A few examples of chemical change are digestion of food, burning of coal, rusting, etc.
Please help me with this question
Thank you!
Answer:
B. 3+
Explanation:
When Fe²⁺ loses an electron, it becomes an Fe³⁺ ion.
The loss of an electron in an atom makes the atom becomes positively charged. Further losing electrons makes the atom more positive.
For the given ion;
Fe²⁺ if it loses an electron more, it becomes Fe³⁺.
The expression is given as:
Fe²⁺ → Fe³⁺ + e⁻
Apollo 11 made a ______ landing.
Answer:
Apollo 11 made a capsule landing
Explanation:
Answer: i don’t know what type of landing you mean
Explanation:
They did a lunar landing then reentry and then capsule landing.
- Is energy absorbed or released by a material during the phase change from a solid to a liquid?
A)Absorbed
B)Released
Answer:
A) Abosrbed
Explanation:
The change is endothermic, meaning the material absorbs energy when it changes its phase from a solid to a liqiud.
How many liters of O2 at STP will react with 8.7 grams of C2H4 to form CO2 and H2O? C2H4 + 3 O2 -------> 2 CO2 + 2 H2O
Answer:
6.944 liters of O₂ at STP will react with 8.7 grams of C₂H₄ to form CO₂ and H₂O.
Explanation:
The balanced reaction is:
C₂H₄ + 3 O₂ ⇒ 2 CO₂ + 2 H₂O
Being the molar mass of the elements:
C: 12 g/moleH: 1 g/moleThen the molar mass of compound C₂H₄ is:
C₂H₄= 2*12 g/mole + 4*1 g/mole= 28 g/mole
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), 1 mole of C₂H₄ acts. Then, being the mass of a mole of a substance, which can be an element or a compound, 1 mole of C₂H₄ is 28 g, which is the amount of mass that reacts in this case.
Then be able to apply the following rule of three: if by stoichiometry 28 grams of C₂H₄ react with 3 moles of O₂, 8.7 grams of C₂H₄ with how many moles of O₂ do they react?
[tex]moles of O_{2} =\frac{8.7 grams ofC_{2} H_{4}*3 moles of O_{2} }{28grams ofC_{2} H_{4}}[/tex]
moles of O₂= 0.31
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Then we can apply the following rule of three: if by definition of STP 1 mole occupies 22.4 L, 0.31 moles how much volume will it occupy?
[tex]volume=\frac{0.31 moles*22.4 L}{1 mole}[/tex]
volume= 6.944 L
6.944 liters of O₂ at STP will react with 8.7 grams of C₂H₄ to form CO₂ and H₂O.
The volume of O₂ at STP that will react with the given C₂H₄ is 20.8 L
First, we will determine the number of moles of O₂ required.
From the given balanced chemical equation,
C₂H₄ + 3O₂ → 2CO₂ + 2H₂O
This means
1 mole of C₂H₄ is required to react completely with 3 moles of O₂
Now, we will determine the number of moles of C₂H₄ present
Mass of C₂H₄ = 8.7 g
Using the formula
[tex]Number\ of\ moles = \frac{Mass}{Molar\ mass}[/tex]
Molar mass of C₂H₄ = 28.05 g/mol
∴ Number of moles of C₂H₄ = [tex]\frac{8.7}{28.05}[/tex]
Number of moles of C₂H₄ = 0.31016 mole
Since
1 mole of C₂H₄ is required to react completely with 3 moles of O₂
Then,
0.31016 mole of C₂H₄ will react completely with 3 × 0.31016 mole of O₂
3 × 0.31016 = 0.9305 mole
∴ Number of moles of O₂ required is 0.9305 mole
Now, for the volume of O₂ at STP that will react
Since 1 mole of a gas occupies 22.4 L at STP
Then,
0.9305 mole of O₂ will occupy 0.9305 × 22.4 L at STP
0.9305 × 22.4 = 20.8432 L
≅ 20.8 L
Hence, the volume of O₂ at STP that will react with the given C₂H₄ is 20.8 L
Learn more here: https://brainly.com/question/15209655
What is the molar mass of carbon?
what volume (in L) of ethane (C2H6) will be required to produce 42.5 L of carbon dioxide in the reaction below?
2C2H6(g)+7O2(g)->4CO2(g)+6H2O(g)
Answer:
21.25
Explanation:
3. A property of acids is that they taste sour. A
property of bases is that they feel slippery. Would
you use either of these properties to identify an
unknown substance? Why or why not?
Explanation:
Touching or tasting these unknown substances could be lethal or cause severe burns to your skin, so it is advisable to use other methods to identify substances.
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
Which section of the ocean floor is near the coastline of all continents?
Answer shallow ocean
Explanation:
i think
PLEASEEEE HELPP
If 359 mL of a gas were contracted to only 269 mL, what would be the initial temperature of it if it measured 422 K after the change?
I NEED IT FAST!!
Answer:
T₁ = 563.19 K
Explanation:
Given data:
Initial volume = 359 mL
Final volume = 269 mL
Final temperature = 422 K
Initial temperature = ?
Solution:
The given problem will be solve through the Charles Law.
Charles Law:
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₁ = V₁T₂ / V₂
T₁ = 359 mL × 422 K / 269 mL
T₁ = 151498 mL.K / 269 mL
T₁ = 563.19 K
A sample of carbon dioxide gas at a pressure of 891 mm Hg and a temperature of 84 C occupies a volume of 5.61 L. If the gas is cooled at constant pressure to a temperature of 40 C, the volume of the gas will be __ L.
Answer:
4.92L
Explanation:
Given parameters:
Initial pressure = 891mmHg
Initial temperature = 84°C = 84 + 273 = 357k
Initial volume = 5.61L
New temperature = 40°C = 273 + 40 = 313k
Unknown:
New volume = ?
Solution:
Since we are dealing with constant pressure condition, we apply charles's law.
It states that the volume of a fixed mass of gas varies directly as its absolute temperature if the pressure is constant.
Mathematically ;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V1 is the initial volume V2 is the new volume
T1 is the initial temperature T2 is the new temperature
[tex]\frac{5.61}{357}[/tex] = [tex]\frac{V2}{313}[/tex]
V2 = 4.92L
How the lead (II) carbonate can be separated and collected from the product mixture with ammonium nitrate?
Answer:
fgedhwkmgfvhcdnxj
Explanation:
gtryijdohuygfvbhgfy
What is formed when polyatomic ions bond with other ions?
It would be Ionic Compounds.
Differentiate between worldwide conservation and national conservation policy.
pls answer i need it now!! I will give brainliest to the best answer!!
Answer:
sample 2
Explanation:
hope this helps
The electrical charge of the nucleus is determined by:
a. the number of neutrons only
b. the number of protons and neutrons together
c. the number of protons only
d. the number of electron only
the rate of effusion of co2 gas through a porous barrier is observed to be 9.31x 10^-4 mol/h. under the same conditions, the rate of effusion of N2 gas would be _______ mol/h
Answer:
[tex]1.167\times 10^{-3}\ \text{mol/h}[/tex]
Explanation:
[tex]R_1[/tex] = Rate of diffusion of [tex]CO_2[/tex] = [tex]9.31\times 10^{-4}\ \text{mol/h}[/tex]
[tex]R_2[/tex] = Rate of diffusion of [tex]N_2[/tex]
[tex]M_1[/tex] = Molar mass of [tex]CO_2[/tex] = 44.01 g/mol
[tex]M_2[/tex] = Molar mass of [tex]N_2[/tex] = 28.0134 g/mol
From Graham's law we have the relation
[tex]\dfrac{R_1}{R_2}=\sqrt{\dfrac{M_2}{M_1}}\\\Rightarrow R_2=\dfrac{R_1}{\sqrt{\dfrac{M_2}{M_1}}}\\\Rightarrow R_2=\dfrac{9.31\times 10^{-4}}{\sqrt{\dfrac{28.0134}{44.01}}}\\\Rightarrow R_2=1.167\times 10^{-3}\ \text{mol/h}[/tex]
The rate of effusion of the [tex]N_2[/tex] gas would be [tex]1.167\times 10^{-3}\ \text{mol/h}[/tex].
Volcanic islands can form over hot spots. The Hawaiian Islands started forming over hot spots in the Pacific Ocean millions of years ago. What process causes the hot, solid rock to rise through the mantle at these locations?
Answer: Convection Currents
Explanation:
Due to the different temperature occurring at the upper and lower layers of the mantle, it causes heat transfer to occur. One of such heat transfer is the Convection currents which causes warmer, less dense rock material in the core to rise through the mantle. Also, the cooler rocks in the higher mantle move slowly towards the core.The movement caused by these Convection current in the Earth are called plate tectonics which are responsible for earthquakes and volcanoes.