The amount of grams of nitrogen gas needed to completely react with 2.8 moles of hydrogen is 26.13 grams.
How to calculate mass?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, nitrogen gas completely reacts with 2.8 moles of hydrogen as follows:
N₂ + 3H₂ → 2NH₃
Based on the above equation, 1 mole of nitrogen gas reacts with 3 moles of hydrogen. This means that 2.8/3 moles = 0.933 moles of nitrogen will react with 2.8 moles of hydrogen.
moles = mass ÷ molar mass
mass = 0.933 moles × 28 = 26.13g
Therefore, 26.13 grams of nitrogen gas is required to react completely.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
if the mass ratio of k to f in a compound is 2.06, how many grams of f are needed to react with 2.30 of k?
To determine the number of grams of element "f" needed to react with 2.30 grams of element "k", you can use the mass ratio provided in the problem. First, let's call the mass of "f" that is needed x. The mass ratio tells us that the mass of "f" is 2.06 times the mass of "k", so we can set up the following equation:
2.06 * x = 2.30
To solve for x, we can divide both sides of the equation by 2.06:
x = 2.30 / 2.06
This simplifies to:
x = 1.12 grams
Therefore, 1.12 grams of element "f" are needed to react with 2.30 grams of element "k".
Find out more about pottasium
brainly.com/question/19642892
#SPJ4
this is the chemical formula for talc (the main ingredient in talcum powder): an analytical chemist has determined by measurements that there are moles of magnesium in a sample of talc. how many moles of oxygen are in the sample? be sure your answer has the correct number of significant digits.
Mg3 (Si,03),(OH), is the chemical formula for talc: an analytical chemist has determined by measurements that there are 90.4 moles of magnesium and 2.43 moles of oxygen in a sample of talc.
Talcum powder is formed from talc. Talc is a mineral created up primarily of metallic element, silicon, and oxygen. As a powder, it absorbs wet well and helps weigh down on friction, creating it helpful for keeping skin dry and serving to forestall rashes.This mineral is employed as a thickening agent and stuff. It's an ingredient in ceramics, paints, and building material.
Talc is a hydrous magnesium sheet salt with the statement Mg3Si4O10(OH)2. The elementary sheet consists of a layer of magnesium-oxygen/hydroxyl octahedra, sandwiched between 2 layers of siliconoxygen tetrahedra.
To learn more about Talc here
brainly.com/question/24082743
#SPJ4
Would you expect to find calcium metal used in conducting wire or
structural materials? Why or why not?
No, we would not expect to find calcium metal used in conducting wire or structural materials. In its pure metallic form, calcium is unstable and unfit for any structural use.
Why aren't calcium-based electrical lines used?
High temperatures cause calcium to burn in the air, creating nitride and oxide. When it combines with water, hydrogen is produced. Therefore, on Earth, it cannot serve as an electrical conductor.
Is calcium an electrical conductor?
Because metals contain moving electrons, they are effective conductors of electricity. Calcium is a metal. Iodine is a non-metal, and since non-metallic elements lack mobile electrons, they are typically poor conductors or non-conductors of electricity. Consequently, solid iodine does not conduct electricity while solid calcium does. The steel cladding of the silicon-calcium alloy cored wire is covered in silicon calcium powder.
To know more about calcium, visit:
https://brainly.com/question/4023397
#SPJ1
how many times acidic is pOH 12 than pOH 10
Answer:
100x less acidic
Explanation:
pOH is the inverse of pH, which is a measure of the acidity or basicity of a solution. The lower the pH of a solution, the more acidic it is, and the higher the pOH, the less acidic it is.
To determine how many times more acidic a solution with a pOH of 12 is compared to a solution with a pOH of 10, we can use the formula:
pH1 / pH2 = 10^(pOH1 - pOH2)
In this case, we are given that the pOH of the first solution is 12 and the pOH of the second solution is 10. We can plug these values into the formula to calculate the ratio of acidity:
pH1 / pH2 = 10^(12 - 10)
= 10^2
= 100
Therefore, a solution with a pOH of 12 is 100 times less acidic than a solution with a pOH of 10.
which set of elements is arranged in order of increasing electronegativity? which set of elements is arranged in order of increasing electronegativity? ga < ge < p < n p < n < ge < ga ge < n < ga < p n < p < ge < ga
The electronegativity is n < p < ge < ga.
What is electronegativity?Electronegativity is a measure of an atom's ability to attract electrons when it forms a chemical bond with another atom. It is based on the Pauling Scale, which assigns values to elements based on their tendency to attract electrons when they form bonds. Electronegativity increases from left to right across the periodic table, and increases from the bottom to the top of the periodic table.
The correct answer is n < p < ge < ga. This is because electronegativity increases as we move down a group in the periodic table and from left to right across a period.
Therefore, the element with the highest electronegativity is at the bottom right corner of the periodic table, which is gaseous, followed by Germanium, Phosphorus, and then Nitrogen.
To learn more about electronegativity
https://brainly.com/question/2415812
#SPJ4
Classify the components as most accurately describing cofactors, coenzymes, or neither. Cofactors Coenzymes Neither ascorbic acid
Ascorbic acid can be defined as an electron donor and therefore it functions as a cofactor for diverse chemical reactions.
What is a cofactor of diverse chemical reactions?A cofactor of diverse chemical reactions can be defined as a non protein compound that is required for the enzyme, i.e., by the protein, in order ti can function normally such as occurs with ascorbic acid for many diverse chemical reactions that involve metabolic pathways in mammalian cells.
The cofactors are molecules that provide the required for the enzyme to function such as an electron donor required to the forming of the enzyme-substrate complex during anabolic pathways.
Therefore, with this data, we can see that a cofactor of diverse chemical reactions is able to provide the enzymes the help in order to carry out chemical reactions such as the conversion of one substrate to a product.
Learn more about cofactors here:
https://brainly.com/question/13452695
#SPJ1
A science class is going to do an experiment to investigate how water temperature changes the rate at which salt dissolves in water. What tool will be needed to measure the temperature of the water?
Answer:
thermometers
Explanation:
Answer: thermometer
Explanation: trust me ;)
Compare and contrast sigma and pi bonds, including their shape and properties.
Sigma bonds are known to have cylindrical charge symmetry around the axis of the bond. No symmetry exists in pi bonds. Atoms with sigma bonds are less reactive. Atoms with pi bonds are highly reactive when compared to those with only sigma bonds.
Look at strontium (Sr) in the periodic table. Would you expect it to be more or less reactive than calcium? Explain.
answer: strontium is more reactive
steps:
strontium is heavier &
strontium is bigger, so
strontium would lose its 2 outer electrons more easily than calcium
strontium is more reactive
reactive means how easily an atom loses or gains electrons
in the periodic table :
rows are called periods
columns are called groups
strontium & calcium are both in the same column
strontium & calcium are both in group 2
strontium is chemically similar to calcium
group 2 elements can lose two electrons
group 2 metals tend to have a +2 charge
group 2 is called alkaline earth metals
factoid : radioactive strontium has been found in many bones from nuclear testing in the 1950s
studycom
https://brainly.com/question/11879757
americanbonehealth
socraticorg
lenntech
nih
westfieldmaedu.
A 75 mL sample of He gas is at 97°C and 0.975 atm. If the sample is cooled to 29°C and the pressure is increased to 1.25 atm, what will the new volume be?
2194.14is the new volume .These laws are described by equations that are variations on the ideal gas law, PV is nRT
How would you determine the volume, temperature, pressure, and amount of gas in a sample under the circumstances?These laws are described by equations that are variations on the ideal gas law, PV = nRT, where P is the gas's pressure, V is its volume, n is the number of moles in the gas, T is its kelvin temperature, and R is the ideal (universal) gas constant.The ideal gas law, PV = nRT, should be reviewed first. P is the ideal gas constant, V the volume in liters, n the number of particles in moles, T the temperature in Kelvin, and n the number of atmospheres in this equation (0.0821 liter atmospheres per moles Kelvin).These laws are described by equations that are variations on the ideal gas law, PV = nRT, where P is the gas's pressure, V is its volume, n is the number of moles in the gas, T is its kelvin temperature, and R is the ideal (universal) gas constant.Explanation:
The ideal gas law, PV = nRT,
97 * 0.975*29 = 2742.675/1.25 = 2194.14.
To learn more about Volume refer to:
https://brainly.com/question/463363
#SPJ1
A calorie is defined as the amount of energy required to raise the temperature of one lb of water by one degree celsius.
a. Trueb. False
Answer: The answer is true
Explanation:
consider a solution containing 0.100 m naf and 0.126 m hf. calculate the concentration of fluoride ion after addition of 5.00 ml of 0.100 m hcl to 25.0 ml of this solution.
The Concentration of a Fluoride ion is [tex]0.0667 M[/tex]
The Hf and Fluoride ion makes a buffer system which can be written as :
[tex]HF\Longleftrightarrow H^{+} +F^{-}[/tex]
[tex]K_{a} =[H^{+}][/tex] X [tex]\frac{[F^{-} ]}{[HF]}[/tex]
both the buffer components are in the same final volume so we can simplify the equation as :
[tex]K_{a}=[H]^{+} \times \frac{[n_{F^{-} }] }{[HF]}[/tex]
before the reaction :
moles of hcl = v x c = (0.00500)L x (0.100)M=[tex]0.000500mol[/tex]moles of hf = v x c=(0.0250)L x (0.126)M=[tex]0.00315mol[/tex]moles of fluoride ion = v x c= (0.0250)L x (0.100)M=[tex]0.00250mol[/tex]hcl will react with fluoride to produce more hf:
after reaction:
moles of hf= [tex]0.00315 +0.000500[/tex]=[tex]0.00365mol[/tex]moles of fluoride = [tex]0.00250-0.000500[/tex]=[tex]0.00200mol[/tex]final volume = [tex]0.0250+0.005[/tex]=[tex]0.0300L[/tex]molarity of fluoride = = [tex]\frac{0.00200mol}{0.0300L}[/tex]= [tex]0.0667M[/tex]learn more concentration problems.
brainly.com/question/15895198
#SPJ4
assume there exists some hypothetical metal that exhibits ferromagnetic behavior and that has 1 simple cubic crystal structure, and atomic radius of 0.130 nm and a saturation flux density of 0.75 tesla. determine the number of bohr magnetons per atom for this material
The number of bohr magnetons per atom for this material is 1.14 when some hypothetical metal that exhibits ferromagnetic behavior and that has 1 simple cubic crystal structure.
Given atomic radius of crystal structure (r) = 0.130nm
saturation flux density of crystal structure = 0.75tesla
We know that n = M/µN = B/µ0µN
n = BVc/µ0µN where Vc is the volume of crystal and B is bohr magneton
n = B(2r)^3/µ0µN = 0.75x(2x0.130x10-9)^3)/(1.25x10-26x9.27x10-24)
n = 13.18x10-30/11.5x10-50 = 1.14x10^20
Hence the number of bohr magnetons per atom for this material is 1.14 .
To learn more about cubic crystal click here https://brainly.com/question/27691721
#SPJ4
8) Is there more gravitational force on the earth or moon? Why?
Answer:
Explanation:
So, to begin answering your question, Earth has a greater gravitational pull than the moon simply because the Earth is more massive. The moon's gravitational pull also affects Earth, though; the rising and falling of the tides are an effect of the moon's gravity. HOPE THIS HELPS ^^
Which characteristic does inertia describe? responses how long an object is how long an object is how large an object is how large an object is how fast an object is moving how fast an object is moving how difficult it is to change an object's motion
Option C, Inertia describes how difficult it is to change the motion of an object.
What is meant by Inertia?The Latin term inerus, which meaning inert or slow, is where the word inertia originates. It may also refer to an object's resistance to a change in velocity.An object is said to have inertia if no external force forces it to change its speed or direction from its current state. Newton's first law of motion included a description of the concept of inertia. It is a propensity to do nothing or to do nothing different.Unless acted upon by an unbalanced force, an object remains at rest and an object in motion will remain to move at a constant speed and in a straight line. This is known as Newton's first law of motion (inertia).Learn more about Inertia refer to :
https://brainly.com/question/1140505
#SPJ4
how many atoms of mercury are in a spherical drop of mercury (hg) that has a diameter of 1.0 mm. (dhg
There are 2.1 atoms of mercury.
Calculation:
Convert 0.0000355 mol of Hg to the '# of atoms of Hg' using Avagadro's number.
Avagadro's constant = 6.022 * 1023 atoms/ mole.
Hence 'number of atoms of Hg' in the given drop of mercury is
= 0.0000355 mol of Hg * 6.022 10²³ atoms of Hg 1 mole Hg
= 2.14* 1019 atoms of Hg.
In question, we are given 1.0 mm in 2 significant figures, so our final answer must also be in 2 significant figures.
Hence the number of atoms of Hg in a given drop of mercury is 2.1x10¹⁹ atoms Plugin 2.1.
Mercury is the smallest planet in the solar system and the closest to the sun. Its orbit around the Sun lasts 87.97 Earth days, making it the shortest of any planet in the solar system.
Learn more about Mercury here:- https://brainly.com/question/879
#SPJ4
Scientists improved Mendeleev’s early periodic table by ___.
including physical properties of elements such as melting point and density
including chemical properties of elements such as the ability to burn or to tarnish
using atomic number instead of atomic mass to organize the elements
using numbers of neutrons and protons to organize the elements by their properties
Scientists improved Mendeleev’s early periodic table by using atomic number instead of atomic mass to organize the elements. Option C
What is the periodic table?We know that the periodic table is the arrangement of the elements by the use of a definite sequence. The order of the arrangement of the elements would be determined in a given manner.
In the Mendeleev’s periodic table, the arrangement of the elements was on the basis of the masses of the elements. This method did not produce a consistent pattern for all the elements.
Learn more about the periodic table:https://brainly.com/question/11155928
#SPJ1
Answer:using atomic number instead of atomic mass to organize the elements
Light passing through a transparent medium has a wavelength of 466 nm and a frequency of 6.20 × 1014 s-1. What is the speed of the light in the medium?
Speed =frequency × wavelength
=466 x 6.20 x [tex]10^{14}[/tex]
=2.8892 x [tex]10^{17}[/tex] m/s
What is the speed of light?
The rate at which light waves go through various materials at the speed of light. Specifically, the speed of light in a vacuum is presently calculated to be 299,792,458 metres per second.
One of nature's basic constants is the speed of light. Its importance extends far beyond its use in characterizing an aspect of electromagnetic waves. It acts as the universe's only limiting velocity, setting an upper limit on both the speed of all material particles and the speed at which signals can travel. The speed of light (c) acts as a constant of proportionality in the well-known relativity equation, E = mc2, connecting the heretofore dissimilar ideas of mass (m) and energy (E).
To learn more about speed of light
https://brainly.com/question/104425
#SPJ1
What makes a field forever unique?
From cotton fields to corn stalks, if this is what you mean, a forever field is unique in its own way by keeping all types of plants in the field. They are all different in how they grow and what they do.
Consider a PTFE molecule adjacent to a PVC molecule. Select all of the secondary bonding types that exist between these two molecules. hydrogen bonding interactions between temporarily induced and permanent dipoles interactions between dipoles that are temporarily induced B covalent bonding D ionic B metallic bonding D interactions between permanent dipoles
Choose every kind of secondary bonding that these two molecules have. 2 metallic hydrogen bonding dipoles that are both momentarily induced.
There are three different forms of interactions between molecules that result in these attractive forces: Dipole interactions, hydrogen bonding interactions, and molecule-molecule interactions are the order in which they occur (London dispersion forces). Polar molecular bonding produces hydrogen bonds, the strongest type of secondary bonding. Choose every kind of secondary bonding that these two molecules have. 2 metallic hydrogen bonding dipoles that are both momentarily induced. These can develop in water or hydrogen fluorides, for instance. When the electrons in two nearby atoms hold positions that cause the atoms to temporarily form dipoles, the consequence is the London dispersion force, a transient attractive force. Unlike main bonds, secondary bonds have substantially lower bonding energies.
Learn more about molecules
https://brainly.com/question/21263612
#SPJ4
Victor put a match on a balance and found that its mass was 6.0 grams. Then he lit the match and put it out after a few seconds.
He put the partially burned match on the balance again. This time, its mass was 4.5 grams.
Which of the following best explains what happened as the match burned?
A.
Some of the matter changed from solid to gas and went into the air.
B.
The matter moved to a different part of the match.
C.
Some of the mass was destroyed by the fire.
D.
The mass of the match combined with the mass of the fire.
Place the cursor at the start of the text, then press CTRL+SHIFT+DOWN ARROW. Press CTRL+SHIFT+UP ARROW after advancing the cursor to the end of the paragraph. The Correct option is B.
How do you move the first sentence to the end of the paragraph in Word?The Ctrl+A keyboard shortcut in Word allows you to select all text in a document, and you can also use the mouse or keyboard to pick out individual words or objects from tables. Text or objects that are located in various locations can also be chosen. You can choose, for instance, a sentence from one page and a paragraph from another.The entire textIn the document, click anywhere.You can pick every word in the document by pressing Ctrl+A on your computer.The particular wording you wantAdditionally, you have the option of choosing a specific word, line of text, or one or more paragraphs.Your cursor should be placed in front of the first letter of the word, sentence, or paragraph you want to pick.To pick a text block, click and hold while dragging the cursor over it.Other options for selecting textQuickly click and drag the mouse over a word to choose it.By positioning your cursor at the beginning of a line of text and pressing Shift + down arrow, you can pick that line of text.Put your cursor at the beginning of the paragraph, then hit the down arrow while holding down the Ctrl and Shift keys to select the paragraph.To Learn more About end of the paragraph refer to:
https://brainly.com/question/25717629
#SPJ1
potassium dichromate, k2cr2o7, is used in tanning leather, decorating porcelain, and water proofing fabrics. calculate the number of chromium atoms in 78.82 g of k2cr2o7..
The number of chromium atoms present in 78.82 g of potassium dichromate are 2.98×[tex]10^{23}[/tex]
Molecular mass is the molar mass, or M, is a physical characteristic in chemistry that is defined as the mass of a particular substance divided by the quantity of that material. For molar mass, the fundamental SI unit is kg/mol. One mole is a collection of 6.022 ×10²³ particles, be the atoms, molecules, ions , electrons, photons or any other things. This value of 6.022 ×10²³ is the Avogadro's number.
1 mole [tex]K_{2}Cr_{2}O_{7}[/tex] = 294.18 g [tex]K_{2}Cr_{2}O_{7}[/tex] contains 2 moles Cr = 2×6.023 × [tex]10^{23}[/tex]Cr atoms.
So, 72.8g [tex]K_{2}Cr_{2}O_{7}[/tex] contains (72.84/294.18)×2×6.023×[tex]10^{23}[/tex] Cr atoms
= 2.98 × [tex]10^{23}[/tex]
Learn more about Avogadro's number:
brainly.com/question/13302703
#SPJ4
assume there exists some hypothetical methat that exbihits ferromagnetic behavior and that has 1 simple cubic crystal strecutre, and atomic radius of 0.130 nm and a saturation flux density of 0.75 tesla. determine the number of bohr magnetons per atom for this material
When compared to a hypothetical ferromagnetic metal with a single simple cubic crystal structure, this substance possesses 1.14 bohr magnetons per atom.
Given that the cubic crystal atomic radius (r) is 0.130 nm
crystal structure's saturation flux density is equal to 0.75 tesla.
We are aware that n = M/N = B/0N.
n = BVc/0N, where BVc is the bohr magneton and Vc is the volume of the crystal.
N = 0.75x(2x0.130x10-9)3)/n = B(2r)3/0 (1.25x10-26x9.27x10-24)
n = 13.18x10-30/11.5x10-50 = 1.14x10^20
Therefore, this cubic crystal substance has 1.14 bohr magnetons per atom.
learn more about cubic crystal here:
https://brainly.com/question/27691721
#SPJ4
what is the solubility (in moles/liter) of pbcl2 in a solution that is 0.15 m solution in hcl? (ksp pbcl2
the solubility (in moles/liter) of pbcl2 in a solution that is 0.15 m solution in hcl? (ksp pbcl2
Solubility of PbCl2 = 7.11×10−4 mol⋅L−1
The maximum amount of a chemical that will dissolve in a given amount of solvent at a given temperature is referred to as its solubility. Varying compounds have very different solubilities, which is a characteristic of a particular solute-solvent pair.What is solubility, for instance?
A typical illustration of a solution is the addition of sugar cubes to a cup of tea or coffee. Solubility is a quality that aids in the dissolution of sugar molecules. Thus, the ability of a substance (solute) to dissolve in a specific solvent can be defined as solubility.
Learn more about solubility here:
https://brainly.com/question/29661360
#SPJ4
What is mechanical advantage? A. output work divided by input work. B. Input work divided by output work. C. Input force divided by output force. D. Output force divided by input force. please help!! If you answer correctly i'll give you 5 stars!!
Output force divided by input force is the mechanical advantage.
Why is it referred to as mechanical advantage?A tool, mechanical device, or machine system's ability to amplify force is known as its mechanical advantage. The system simply balances forces against movement in order to achieve the desired output force amplification while maintaining the input power. The law of the lever can be used as an example for this.
Levers and pulleys are examples of simple machines that use mechanical advantage, a measurement of the ratio of output force to input force in a system.
A calculation known as a mechanical advantage quantifies the amplified force that a mechanical system absorbs. It provides the ratio of force applied to the load to force required to overcome that force. Since the two ratio quantities are the force, the expression has no units.
To know more about mechanical advantage visit:
https://brainly.com/question/16617083
#SPJ1
Which element has a larger atomic radius F or Be
Answer:
F
Explanation:
ella is interested in combining substances to form a new material. what does she need to know before she combines the substances to create a specific material? a. whether the substances are synthetic or from natural resources b. that all materials react to combine and form new products accidentally c. the physical and chemical properties of the material that will be formed d. the physical and chemical properties of the substances and how they react chemically
Ella is intrigued by the idea of fusing elements to create new materials. Before she mixes the ingredients to make a particular materials, she must understand the physical and chemical qualities of the constituent parts and how they interact.
Sanding just altered the surface's texture; the wood itself did not convert into a new substance. Even though a piece of metal may glow after being burnt in a fire, the metal remains the same substance both during and after cooling. The production, characterization, and use of materials with intriguing or potentially beneficial physical or chemical properties include the use of chemistry, according to the emerging and highly multidisciplinary field of study known as materials chemistry.Materials chemistry includes solid-state chemistry, nanoscience, and polymer chemistry since it encompasses inorganic, organic, polymeric, and hybrid materials. The creation of new technologies and the growth of the world economy both depend on materials chemistry. Looking back, we can see that synthetic materials have significantly raised global living standards and quality of life.
learn more about materials Refer:brainly.com/question/28646672
#SPJ4
Orange light has a frequency of 4.8×1014 s−1. What is the energy of one quantum of orange light?
The energy of one quantum of orange light, given that it has a frequency of 4.8×10¹⁴ s⁻¹ is 3.18×10⁻¹⁹ J
How do I determine the energy?We know that energy and frequency are related according to the following equation:
Energy (E) = Planck's constant (h) × frequency (f)
E = hf
Using the above formula, we can obtain the energy of one quantum of the orange light. Details below:
Frequency (f) = 4.8×10¹⁴ s⁻¹Planck's constant (h) = 6.626×10⁻³⁴ JsEnergy (E) = 6.23×10⁻¹⁹ JEnergy (E) = Planck's constant (h) × frequency (f)
E = hf
E = 6.626×10⁻³⁴ × 4.8×10¹⁴
E = 3.18×10⁻¹⁹ J
Thus, the energy is 3.18×10⁻¹⁹ J
Learn more about energy:
https://brainly.com/question/8623863
#SPJ1
How many moles exist in 3,000,000 particles of gold (Au)?
Answer:
4.98 x 10^-18 mole
Explanation:
1 mole has 6.022 x 10^23 particles
so 3,000,000/(6.022 x 10^23) = 4.98 x 10^-18 mole
which of the reagents below will oxidize a secondary alcohol to a ketone? multiple choice lialh4 hio4 k2cr2o7, h2so4/h2o hgso4, h2so4/h2o
The reagents below will oxidize a secondary alcohol to a ketone are k₂Cr₂O₇, H₂SO₄ / H₂O.
The reagents that used in the oxidation of the secondary alcohol to a ketone is given as : k₂Cr₂O₇, H₂SO₄ / H₂O. the one of the example of the oxidation of the secondary alcohol to the ketone is given as follows :
OH O
| Cr₂O₇²⁻ ||
R - CH - R ----------> R - C - R
Secondary ketone
alcohol
The further oxidation does not place because of the absence of the reactive C - H that found in the aldehyde. the tertiary alcohol will not under go oxidation.
To learn more about reagents here
https://brainly.com/question/13108224
#SPJ4
