how will you measure the length of a curved line by using a thread? ​

Answers

Answer 1
A curved line or surface cannot be measured by a straight scale, a measuring tape or thread must be used instead.To measure a curved line using a thread, follow the below steps:

Tie a knot at one end of the thread.
Place the thread at the beginning of the line and try to measure a small initial portion of the line which is relatively straight.
Place your thumb at the other end of the measured portion and measure next straighter portion.
Repeat the above step till the end of line is reached. Make a knot at the end of the line.
Now, straighten the thread and measure the length of the two knots on a scale.

Related Questions

Consider the hypothetical chemical reaction represented by the equation 3 A + 2 B → A 3B 2 Which of the following is a correct interpretation of this equation? i. 3 grams of A react with 2 grams of B to form 1 gram of A 3B 2 ii. 3 atoms of A react with 2 atoms of B to form 1 molecule of A 3B 2 iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2

Answers

Answer:

iii. 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2

Explanation:

A + 2 B → A 3B 2

A chemical equation among other things, gives the stoichiometry of the reaction; that is the relationship between reactants and products.

This relationship is basically stated in moles form the coefficients of the reactants and product.

From the reaction above, we can say;

1 mol of A reacts with 2 mol of B to form 1 mol of A3B2

It cannot be grams because the reactants and products all have different molar masses.

The correct interpretation of the equation of the hypothetical chemical reaction is; Choice (iii) 3 moles of A react with 2 moles of B to form 1 mole of A 3B 2.

Definition:

Chemical equations are equations that make use of chemical formulae and symbols to represent chemical reactions. The left-hand side of a chemical equation represents the reactants and the right-hand side represents the products.

Each reacting entity is also assigned its corresponding stoichiometric coefficient.

However, this stoichiometric coefficient is to quantify the no. of moles of the reactants consumed or products formed as the case may be.

Read more:

https://brainly.com/question/12271256

take an onion and one jam bottle insert the roots of onion in the jam bottle for five days . after five days observe the growth in the roots of onion which is submerged in jam bottle. write observation here

Answers

Answer:

It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle

Explanation:

It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle. The growth of a plant is due to the availability of the growing and  dividing cells in the meristematic regions of the apical meristems. (stem cells). This site are active site for elongation and differentiation  of the stem tissues. In the apical meristem of the root cells, the cells have the potential to carry out mitosis and cell division repeatedly in order to generate newer cells for extension and development of stems and leaves. With each cell division, one cell remains in the meristem which the other increases in size and differentiate due to different genomic expression to form the meristem regions which eventually becomes the stem structure.

the mass of empty cylinder is 20 gram its mass when its filled completely with water is 30 gram and its mass when its filled completely with unknown liquid is 27 gram find the density of, the unknown liquid ​

Answers

Answer:

≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)

Explanation:

The mass of empty cylinder is 20g

The mass of water filling the cylinder = 30g - 20g = 10g

The mass of unknown liquid filling the cylinder = 27g - 20g = 7g

Density of water = 997 kg/m³

Converting this density to g/cm³ we get;

1kg = 1000g , 1m³ = 1000000cm³

So density = [tex]\frac{997000}{1000000}[/tex] g/cm³ = 0.997 g/cm³

So the volume of water occupied by 10g is;

10 × 0.997 = 9.97 cm³

This volume is also occupied by 7g of the unknown liquid.

Density = mass/volume

Density of the unknown liquid = 7g ÷ 9.97cm³ = 0.702106319 g/cm³ ≈ 0.70 g/cm³ (answer rounded up to 2 decimal places)

What happens during an alpha decay?

Answers

Answer:

Alpha decay is a type of radioactive disintegration in which unstable atomic nucleus releases a helium nucleus or alpha particle and transform into a different element. The new element formed will be reduced by four and the atomic number will be reduced by two.

Example of alpha decay is: Uranium 238 transform into Thorium 234 with the emission of an alpha particle.

which one of the following has the smallest atomic radius a)Mg2+ b)O2- c)Na+ d)F-

Answers

Answer:

Mg2+

Explanation:

o2- =2,8

mg2+ =2,8

na+ =2,8

f- =2,8

since they are all same it depends on protons.

mg2+ has least protons

Please Help !!! Calculate the density water, if it takes up 237 mL and the mass is 237 g.

Answers

Hey there !

Mass = 237 g

Volume 237 mL

Therefore:

Density = mass / Volume

D = 237 / 237

D = 1.0 g/mL

Hope this helps!

Human lungs have evolved to breathe oxygen at a pressure as that in the atmosphere, 0.21 atm. If a particular heliox mixture to be carried by a scuba diver is at a pressure of 7.00 atm, what should be the partial pressure due to helium in order to maintain the pressure due to oxygen at 0.21 atm?

Answers

Answer:

6.79 atm

Explanation:

Applying Dalton's law of partial pressure:

[tex]P_{total} = P_{helium} + P_{oxygen}[/tex], where [tex]P_{total}[/tex] = total partial pressure of all the component gases in the mixture, [tex]P_{helium}[/tex] = partial pressure of helium gas, and [tex]P_{oxygen}[/tex] = partial pressure of oxygen gas.

From the illustration, [tex]P_{total}[/tex] = 7.00 atm and [tex]P_{oxygen}[/tex] = 0.21 atm. Hence, the partial pressure due to helium is calculated such that:

[tex]P_{helium}[/tex] = [tex]P_{total} - P_{oxygen}[/tex]

           = 7.00 - 0.21

              = 6.79 atm

Therefore, the partial pressure due to helium in order to maintain the pressure due to oxygen at 0.21 atm would be 6.79 atm.

Examine the given reaction. NH4NO3(s) → NH4+(aq) + NO3–(aq) ΔH° = 25.45 kJ/mol ΔS° = 108.7 J/mol·K Which of the given is correct about the ΔG° at 25 °C?
A)+4,360 J
B)−6,942 J
C)−4,360 J
D)+6,942 J

Answers

Answer:

B)−6,942 J /mol

Explanation:

At constant temperature and pressure, you cand define the change in Gibbs free energy, ΔG, as:

ΔG = ΔH - TΔS

Where ΔH is enthalpy, T absolute temperature and ΔS change in entropy.

Replacing (25°C = 273 + 25 = 298K; 25.45kJ/mol = 25450J/mol):

ΔG = ΔH - TΔS

ΔG = 25450J/mol - 298K×108.7J/molK

ΔG = -6942.6J/mol

Right solution is:

B)−6,942 J /mol

write the formula of three compounds which you know and name the elements in them​

Answers

Answer:

[tex]\boxed{\sf{view \ explanation}}[/tex]

Explanation:

Compound definition:

A compound is a chemical substance formed by two or more chemically bonded elements.

Three compounds:

Water is a compound with the formula [tex]\sf H_2O[/tex].

Two hydrogen atoms and one oxygen atom is present in one molecule of water.

Sodium chloride or table salt is a compound with the formula [tex]\sf NaCl[/tex].

One sodium atom and one chlorine atom is present in one molecule of sodium chloride.

Ammonia is a compound with the formula [tex]\sf NH_3[/tex].

In one molecule of ammonia, one nitrogen atom and three hydrogen atoms are present.

Answer:

See below

Explanation:

Three compounds are:

1) [tex]\mathrm {H_{2}SO{4}}[/tex] [Sulfuric acid]

The elements in this compound are hydrogen (H) , Sulfur (S) and Oxygen (O).

2) [tex]\mathrm {NaOH}[/tex] [Sodium hydroxide]

The elements in this compound are Sodium (Na) , Oxygen (O) and Hydrogen (H).

3) [tex]\mathrm {HCl}[/tex] [Hydrochloric acid]

The elements are Hydrogen (H) and Chlorine (Cl).

calculate the weight of 3.491 into 10 to the power 19 molecules of cl2​

Answers

Answer:

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ is 4.11 × 10⁻³ grams

Explanation:

The number of particles in one mole of a substance id=s given by the Avogadro's number which is approximately 6.023 × 10²³ particles

Therefore, we have;

One mole of Cl₂ gas, which is a compound, contains 6.023 × 10²³ individual molecules of Cl₂

3.491 × 10¹⁹ molecules of Cl₂ is equivalent to (3.491 × 10¹⁹)/(6.023 × 10²³) = 5.796 × 10⁻⁵ moles of Cl₂

The mass of one mole of Cl₂ = 70.906 g/mol

The mass of 5.796 × 10⁻⁵ moles of Cl₂ = 70.906 × 5.796 × 10^(-5) = 4.11 × 10⁻³ grams

Therefore;

The mass of 3.491 × 10¹⁹ molecules of Cl₂  of Cl₂ = 4.11 × 10⁻³ grams.

ANSWER ASAP WILL GIFT BRANILIEST Which of the following happens to a molecule of an object when the object is cooled? A Its temperature increases. B It loses kinetic energy. C Its size increases. D It moves faster.

Answers

Answer:

It loses kinetic energy.

Explanation:

The definition of heat is molecules moving fast, so it cooling would mean they slow down.

Answer:

B, It loses kinetic energy.

Explanation:

Find the density of a cube on Earth that weighs 1.5 kg and has a side-length of 10 cm.

Answers

Answer:

1.5g/cm³

Explanation:

density=mass÷volume

mass= 1.5kg (change into g) = 1500g

volume of the cube = 10×10×10 = 1000cm³

density= divide 1500g÷1000cm = 1.5g/cm³

Density= 1.5g/cm³

YOUR WELCOME!

The density of the cube on Earth that weighs 1.5 kg and has a side length of 10 cm is 1.5g/cm³

What is density?

"Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume."

density = mass / volume

The mass of the cube on earth is 1.5 kg

The side length of the cube is 10 cm.

The mass is given in kg. It is converted into grams.

mass= 1.5kg (change into g) = 1500g

A cube is a three-dimensional square, it has 6 faces, so its volume will be calculated completely.

Volume of the cube = 10×10×10 = 1000cm³

Putting the values in the formula of density

density= divide 1500g /1000cm = 1.5g/cm³

Thus, the density of the cube on Earth is 1.5g/cm³.

To learn more about density, refer to the link:

https://brainly.com/question/13291386

#SPJ2

3.490x 10^-3 + 1.100x10^-2

[?]x10^[?]​

Answers

[tex]1.44\times 10^{-2}[/tex]

Explanation:

We need to find the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex].

Here,

The first number is [tex]3.49\times 10^{-3}[/tex]

The second number is [tex]1.1\times 10^{-2}[/tex]

To add these numbers as follows :

[tex]3.49\times 10^{-3}+1.1\times 10^{-2}=0.01449\\\\=1.44\times 10^{-2}[/tex]

So, the value of [tex]3.49\times 10^{-3}+1.1\times 10^{-2}[/tex] is [tex]1.44\times 10^{-2}[/tex]

When an object falls toward the ground due to gravity, what type of energy becomes kinetic energy?

Answers

Answer:

potential energy (gravitational)

Explanation:

Potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height. If we think of the ground as the zero height, the height of the object is coming down from a positive height.  Wherever it is relative to the zero height, it is stored at that height, meaning that it is potential energy at that particular height.  When it moves to the ground, it becomes kinetic, by gravitational means.

Answer:

Potential

Explanation:

What are the requirements of any hypothesis in science?

Answers

Answer:

A scientific hypothesis must meet 2 requirements:

Explanation:

A scientific hypothesis must be testable, and;

A scientific hypothesis must be falsifiable.

0.32 L is equal to how many mL

Answers

Its 320 milliliters.

Which of these scientist is know for his work in understanding climate change a : edwin hubble b : christian doppler c : warren washington d : charles kuen kao

Answers

Answer: just trust me its c

Explanation: i dont cap

What is the equilibrium constant of aA+bB cC +dD?

Answers

Explanation:

{c}^C . {d}^D / {a}^A . {b}^B

What is the main factor responsible for the acidic and basic character of oxides?
Explain your answer.​

Answers

Explanation:

We define non-metal oxide acidity in terms of the acidic solutions formed in reactions with water. For example, sulfur trioxide reacts with water to forms sulfuric acid. In sum, acidic oxides are oxides of non-metals, and basic oxides are oxides of metals. ... CrO is basic, Cr2O3 is amphoteric and CrO3 is acidic.

Reply me in comments

What is ionic bond and explain it​

Answers

Answer:

An ionic bond is a chemical bonding involving the attraction between oppositely charged ions

Explanation:

On the periodic table, elements from group 1 and 7 are attracted to each other and when they bond, it's called ionic bonding. This is because of their valence electrons and ions.

Answer:

Ionic bonding is a type of chemical bonding that involves the electrostatic attraction between oppositely charged ions, and is the primary interaction occurring in ionic compounds. It is one of the main types of bonding along with covalent bonding.

Select the correct answer from each drop-down menu. At chemical equilibrium, the amount of because .

Answers

Answer:

The answer that completes the question are in BOLD:

At chemical equilibrium, the amount of PRODUCT AND REACTANT REMAIN CONSTANT because the RATES OF THE FORWARD AND REVERSE REACTIONS ARE EQUAL.

Explanation:

In a reversible chemical reaction, an equilibrium is said to be achieved when the rates of the forward reaction is equal to that of the reverse reaction. A reversible reaction is one in which products are formed from reactants simultaneously with the formation of reactants from products.

The combination of two or more substances called REACTANTS gives rise to another substance called PRODUCT, which can in turn give rise to Reactants again. With time, the rate at which the reactants give rise the products, which is called the FORWARD REACTION will be equal to the rate at which the products give rise to the reactants, which is called REVERSE REACTION. At this point, the chemical reaction is said to be in a STATE OF EQUILIBRIUM.

When the rate at which both reaction occurs becomes equal i.e. at an equilibrium state, the concentration of both the reactants and the products becomes constant i.e. no longer changes. Hence, the amount of the reactants forming the products is the same as the amount of products forming the reactants.

N.B: At chemical equilibrium, the amount of the reactants and products does not necessarily equals zero (0). It simply means that there is no net change in the concentration/amount of both reactants and products.

If two solutions with concentrations of 0.4 M sugar and 0.7 M sugar respectively are separated by a semipermeable membrane, during osmosis there is a net flow of Group of answer choices sugar molecules from the dilute to the concentrated solution sugar molecules from the concentrated to the dilute solution water molecules from the concentrated to the dilute solution water molecules from the dilute to the concentrated solution

Answers

Answer: Water molecules from the dilute to the concentrated solution

Explanation:

During Osmosis if a solution is separerated by a semipermeable membrane, the solvent (typically water) from the less concentrated solution in terms of solute goes through the semipermeable membrane to the solution with the higher concentration so that the concentrations between the solutions can be balanced.

With the above solutions therefore, water molecules would move from the solution of 0.4M of sugar to the solution with a 0.7M of sugar through the semipermeable membrane.

During osmosis, water molecules move from the dilute to the concentrated solution.

OSMOSIS:

Osmosis is the movement of water molecules from a region of higher concentration (low concentration of solute) to a region of lower concentration (higher concentration of solute).

The principle of movement is based on the concentration gradient i.e. difference in concentration across a semipermeable membrane.

According to this question, two solutions have sugar concentrations of 0.4 M sugar and 0.7 M respectively and are separated by a semipermeable membrane.

Therefore, water molecules will move from the dilute (0.4M) to the concentrated (0.7M) solution during osmosis.

Learn more at: https://brainly.com/question/13655668?referrer=searchResults

What is the outcome of all chemical changes when two substances are combined?​

Answers

Answer:

This is called a chemical reaction. gas may form.heat may be produced and the color may change

Match the set of measurements of the boiling point of water with the best

description.

Measurements

Description

6. 103 °C, 90 °C, 101 °C

a.

Precise

7. 100 °C, 99 °C, 100 °C

b.

Accurate

8. 105 °C, 106 °C, 105 °C

c. Both accurate and precise

9. 99 °C, 101 °C, 100 °C

d. Neither accurate nor precise

Answers

Answer:

Matching

6.D

7.A

8.C

9.B

Explanation:

Took test

103 °C, 90 °C, 101 °C Neither accurate nor precise, 100 °C, 99 °C, 100 °C are Precise, 105 °C, 106 °C, 105 °C are Both accurate and precise, 99 °C, 101 °C, 100 °C are Accurate. These are the correct set of measurements of the boiling point of water.

what are  boiling point and melting point ?

The melting point is defined as the temperature at which solid and liquid phases are at equilibrium state, whereas the boiling point is defined as the temperature at which the pressure of a vapor of a  liquid is equal to the external pressure.

Melting point in which the melting of solid occur to become a liquid at a given temperature, here the molecules gain enough amount of kinetic energy to get the intermolecular forces to convert into another form.

In case of Boiling point the liquid phase enters into the gaseous phase, when the external pressure is high than a temperature for the vapor pressure equal to the external pressure.

Learn more about boiling point, here:

brainly.com/question/28203474

#SPJ2

9.7300x10^2
+
9.8700x10^3

[?]x10^[?]​

Answers

Answer:

1.0843×10^4

Explanation:

If we are to add 9.7300x10^2 + 9.8700x10^3, we must first make the powers of the both to be be the same so that we can carry out any mathematical manipulation of interest. So we can have;

9.7300x10^2 + 98.700x10^2

When we now add the both we have (9.7300 + 98.700)×10^2.

This now gives us the result, 108.43×10^2 which is correctly written as 1.0843×10^4, according to the rules of writing in scientific notation.

3. What amount of
space is taken up by a rock that weighs 150 milligrams, and
has a density of 30 mg/ml? (Express your answer in Liters)

Answers

Hey there!:

Density = 30 mg/mL

Mass = 150 mg

Volume = ??

Therefore:

D = m / V

30 = 150 / V

V = 150 / 30

V = 5.0 mL

converts volume into liters :

5.0 mL / 1000 => 0.005 L or 5.0 x 10⁻³ L

Hope this helps!

In the laboratory, a volume of 100 mL of sulfuric acid (H2SO4) is recorded. How many g are there of the liquid if its density is 1.83 g / cm3?

Answers

Answer:

[tex]\large \boxed{\text{183 g}}[/tex]  

Explanation:

[tex]\begin{array}{rcl}\text{Density} & = & \dfrac{\text{Mass}}{\text{Volume}}\\\\\rho & = &\dfrac{m}{V}\\\\1.83 \text{ g$\cdot$ cm}^{-3} & = & \dfrac{m}{\text{100 cm}^{3}}\\\\m & = & \text{183 g}\\\end{array}\\\text{There are $\large \boxed{\textbf{183 g}}$ of sulfuric acid.}[/tex]

List the metals Mg, Cu, Au, Na and Al in the decreasing order of their reactivity with air.

Answers

Answer:

Na is most reactiveAlcuAu is less reactiveIN HERE

Answer:

Potassium  (K)

Sodium  (Na)    

Calcium  (Ca)

Magnesium (Mg)  

Aluminium  (Al)

Iron  (Fe)  

Lead  (Pb)

Copper  (Cu)  

Silver  (Ag)

Gold  (Au)

Which of the following is not an antioxidant _________
1) Sodium benzoate 2) Sulphur dioxide 3) Sulphite salts 4) Citric acid

Answers

Answer: 1. Sodium Benzoate

Explanation: An anti-oxidant is a substance that can help prevent or stop the damage done by free radicals. Examples include; Sulphur Dioxide, Sulphite Salts, Citric Acid, e.t.c

Sodium benzoate is a pure preservative.

If you have a little air in a balloon, find the volume of the balloon if the mass is 0.6 g and the density of the air is 0.0012 g / mL

Answers

Hey there!:

Mass = 0.6 g

Density = 0.0012 g/mL

Volume = ??

Therefore :

Density = mass / Volume

0.0012 = 0.6 / V

V = 0.6 / 0.012

V = 500 mL

Hope this helps!

Other Questions
g dGDP is made from ________ by the ribonucleotide reductase. This enzyme is inactive when ______ is bound to its master regulatory pocket. A scuba diver fills her lungs to capacity (6.0 L) when 10.0 m below the surface of the water and begins to ascend to the surface. Assume the density of the water in which she is swimming is 1000 kg/m3 and use g = 10 m/s2A. Assuming the temperature of the air in her lungs is constant, to what volume must her lungs expand when she reaches the surface of the water?B. What effect would the warming of the air in her lungs have on the volume needed when she surfaces?C. Assuming the temperature of the air in her lungs is constant, what effect does her ascent have on the vrms of the air molecules in her lungs? EXTRA POINTS. WILL GIVE A BRAINLIEST AND A THANK YOU. ANSWER ASAP... I want a clear, grammatically correct answer please, Part A and Part B separate; This is an essay, please write it as such. All steps! Easy to understand! Josh and his friends bought vanilla wafers for $4 per packet and chocolate wafers for $1 per packet at a carnival. They spent a total of $45 to buy a total of 27 packets of wafers of the two varieties. Part A: Write a system of equations that can be solved to find the number of packets of vanilla wafers and the number of packets of chocolate wafers that Josh and his friends bought at the carnival. Define the variables used in the equations. (5 points) Part B: How many packets of chocolate wafers and vanilla wafers did they buy? Explain how you got the answer and why you selected a particular method to get the answer. (5 points) What are the possibilities of AI technology in various fields of mathematics education.?Please help fast In series combination of resistors, the total electric current is equal to the current flowing through each resistor. A. False B. True C.The statement above lacks informationWILL GIVE BRAINLIEST! :) The Busby Corporation had a share price at the start of the year of $26.20, paid a dividend of $0.56 at the end of the year, and had a share price of $29.00 at the end of the year. Which of the following is closest to the rate of return of investments in companies with equal risk to The Busby Corporation for this period?A) 5%B) 7%C) 9%D) 13% A hammer is used to hit a nail into a board. Which statement is correct about the forces at play between the nail and the hammer? The nail exerts an equal force on the hammer in the same direction. The nail exerts a much smaller force on the hammer in the opposite direction. The nail exerts an equal force on the hammer in the opposite direction. The nail exerts a much smaller force on the hammer in the same direction. 20. All of the following were staple foods of the Pacific Northwest Indian, except: A. pemmican B. camas root C. buffalo D. salmon Which of the following reflects the relationship between the posterior and the anterior pituitary glands?A. Unlike the posterior pituitary, the anterior pituitary makes and releases its own hormones without input from the hypothalamus.B. One is always a little behind.C. The anterior pituitary is under the control of the hypothalamus but the posterior pituitary is not.D. Unlike the posterior pituitary, the anterior pituitary releases "releasing or inhibiting" hormones.E. The posterior pituitary releases neurohormones and the anterior pituitary releases hormones.F. They are both extensions of the hypothalamus. The advantages of using typedef do not include:a. Making programs more portable by allowing data types to be easily changed to meet system specifications.b. Making type names shorter.c. Making programs more readable.d. Increasing the efficiency of accessing struct member variables. does the tendency to gain electrons decrease as we go down grp 17? (07.02 LC)Read and choose the option with the best word or words to complete the sentenceMario es artstico. Quiere trabajar eny tocar la guitarra todas las noches.O la mezquitaO el teatroO el museoOla bibliotecaQuestion 3 (Matching Worth 4 points) Which of the following statements is true for a function with equation Ax) = 5(3)*?The graph has y-intercept (0,5) and increases with a constant ratio of 3.The graph has y-intercept (0, 3) and decreases with a constant ratio of 3.The graph has y-intercept (0, 3) and increases with a constant ratio of 5.The graph has y-intercept (0,5) and decreases with a constant ratio of 3. Find the common ratio for the geometric sequence for which [tex]a_1[/tex]=3 and [tex]a_5[/tex]=48. A. -3 B. -2 C. 3 D. 2 an astronaut takes a tuning fork with her to the moon she strikes it inside the cabin the cabin is normally filled with air so the humans inside the spacecraft are comfortable she also strikes it outside the spacecraft when she gets down on the surface of the moon which of the following is true about the tuning fork?A: it does not vibrate inside the spacecraftB: id does not vibrate on moon surfaceC: it vibrations are not transmitted inside the spacecraft D:it's vibrations are not transmitted to the moon's atmosphere The Habeas Corpus Act of 1679 contributed to what political development?-The outbreak of a civil war-The overthrow of King James I-The limitation of monarchical power-The rise to power of William and Mary will rate you brainliest Sam entered into a contract to sell his home to Gina. After the inspection, Gina insisted that Sam replace the damaged roof. Sam refused, and the parties agreed to cancel the deal. This is an example of ______. The number of weekly hours spent on a smart device varies inversely with the person's age. If a 20-year-old person spends 52 hours on their smart device each week, how many hours does a 50-year-old person spend on their smart device? "A customer's short margin account shows the following balances: Credit Balance: $120,000 SMV: $60,000 SMA: $30,000 What would the adjusted SMA balance be in the account after a short cover of 100 shares of MMM stock at $100 in the account?"