Explanation:
It is known that like charges repel each other and unlike charges attract each other.
As the balloons are facing each other with like charges so they will repel each other. Hence, they will move apart.
But when balloons were moved further apart then interaction between them will decrease and then there will be no force of repulsion or force of attraction.
What is a natural disaster?
Answer:
Explanation:
A natural disaster is a major adverse event resulting from natural processes of the Earth; examples include floods, hurricanes, tornadoes, volcanic eruptions, earthquakes, tsunamis, storms, and other geologic processes
Answer:
A natural disaster is a natural, major harmful event resulting from natural processes of the Earth such as floods, earthquakes, or hurricanes, tornadoes, volcanic eruptions, tsunamis, storms, and other geologic processes that causes great damage or loss of life.
This graph represents a population of molecules in a gas versus the distribution of the average velocity(speed) of its molecules in that population. Assume all molecules to be of the same mass. In reading the graph, it is important to note three things. One, is the most probable speed is at the peak of the curve. Secondly, the most probable speed increases as the temperature increases (so shift to the right), and the distribution broadens as it increases.
On the graph, indicate the average kinetic energy of the population.
Explain your answer.
What part of the graph indicates the temperature of the sample?
Explain your answer.
Sketch a curve that represents the distribution of molecules at a temperature below the one shown. Label it as T2. Describe both T and T2 in terms of their average kinetic energy. Be specific and detailed.
Submit your answer below.
Answer:
Part A
Given that the graph is symmetrical and bell shaped, the average kinetic energy is given by the midline of graph, which corresponds to the common speed of the highest number of the population
Part B
The formula for the average kinetic energy, K.E. = (3/2)·(R/NA)·T
Therefore, the part of the graph that indicates the temperature of the sample is the average kinetic energy. K.E.
Part C
At a lower temperature, the heat is less evenly distributed and we have the distribution T2 higher than T1
Please see the attached graph created with MS Visio
Explanation:
Which has more molecules in it 10g H, 0 or 10g NaCl*
A)010g of H0
B)10g of NaCl
C)They have the same number of molecules
D)Cannot be determined
Answer:
10 grams of hydrogen
Explanation:
A doctor is testing a new medication and he doesn’t tell the people in the study about the possible side effects of the medicine. He is _____.
The photograph below shows the East African Rift Valley in Africa. Which tectonic movement
of Earth’s crust is most likely responsible for this feature?
Answer:
divergence of continental crust
Explanation:
Witch part of an atom is mostly empty space?
What is the gram molecular mass of a compound if 5 moles of the compouns has a mass of 100 grams?
Answer:
20 grams.
Explanation:
5 mols of a compound has a mass of 100 grams
1 mol of the same compound has a mass of 100/5 = 20 grams
Why increasing the temperature of a gas would increase the volume of its container in gas law?
When the amount of gas in a container is increased, the volume increases. Lussac's law states that the pressure of a given amount of gas held at constant volume is directly proportional to the Kelvin temperature.
How many moles are in 2.11 x 1014 molecules of LiBr?
Answer: There are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.
Hence, moles in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr are calculated as follows.
[tex]Moles = \frac{2.11 \times 10^{14}}{6.022 \times 10^{23}}\\= 12.71 \times 10^{-9}[/tex]
Thus, we can conclude that there are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.
A gas fills up a container that has 2.5L has a pressure of 3.5 atm. If the gas gets transferred to a container that holds 4L, what would the new pressure be?
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
chlorine is larger so the symbol is <
Explanation:
Explain why the buffering action of these chemical reactions is limited by the present day rate of change for atmospheric CO2 concentration
Answer:
Due to increase in carbondioxide gas.
Explanation:
The buffering action of these chemical reactions is limited by the present day rate of change for atmospheric carbondioxide concentration because the the rate of atmospheric carbondioxide rises as compared to ancient atmospheric carbondioxide gas. Due to increase of human activities, the concentration of carbondioxide gas increases in the atmosphere which limits the buffering action of these chemical reactions so we can say that carbondioxide gas is responsible for its limited action.
which of these elements has two valence electrons?
a. hydrogen (H)
b. barium (Ba)
c. nitrogen (N)
d. krypton (Kr)
e. bromine (Br)
How much mass does 1 mol of O2 gas have?
O A. 16.00 x 2g
O B. 16.00 x (6.02 x 10^23) g
C. 2 x (6.02 x 10^23) g
D. 16.00 g
Answer:
Option A.
Explanation:
1 mol of anything contains 6.02×10²³ particles.
We know that 1 mol of oxygen gas contains 2 moles of O.
1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.
By the way, the mass for 1 mol of O₂ may be:
Option A → 16 g/mol . 2 mol
32 g
Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.
Another example can be:
1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.
PLEASE ANSWER! WILL GIVE A LOT OF POINTS! NEEDS EXPLANATION! NO LINKS OR I'LL REPORT!! PLEASE
distilling ethanol from a wine to determine the percentage of alcohol in a wine uses what type of property
physical property
bonding property
homeowner's property
Answer:
Bonding property
Explanation:
Distillation deals with boiling solutions. Therefore the boiling point has a major part to play. Boiling point of a substance deals with the type of bonds present. For example water has hydrogen bonding which is a weak intermolecular force therefore the boiling point of water isn't that high. If we were to focus on an ionic compounds the boiling point would be higher because ionic compounds have ionic bonding which are stronger bonds which therefore requires more energy to break those bonds therefore a higher boiling point.
In this case for the ethanol to distill the property it's focusses on is the bonds. The strength of the bonds really.
what is a metal ore?
Answer:
metal ores are naturally occurring rocks that contain metals or metal compounds in sufficient amounts to make it worthwhile extracting them
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
What is the uses of seawater as a source of renewable energy?
Explanation:
Desalination of seawater is considered a renewable source of water, although reducing its dependence on fossil fuel energy is needed for it to be fully renewable.
Write the electron configuration for Gold (Au). You may choose to write it in the long form or in the noble gas configuration form (shortcut).
Answer:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s¹4f¹⁴5d¹⁰
Explanation:
Which statement explains why catalysts are important for living
organisms? *
Catalysts increase the amount of product formed from limited reactants.
Catalysts cause gases to be produced at a slower rate, so cells don't burst.
Catalysts are used up during chemical reactions, so organisms must constantly make
new ones.
Catalysts allow chemical reactions to occur at temperatures at which the organism
lives.
Answer:
Catalysts allow chemical reactions to occur at temperatures at which the organism lives.
Explanation:
Catalysts are molecules that speeden the rate of chemical reaction by lowering the activation energy of the reaction. In a living system, the catalyst are ENZYMES, which help to hasten up many biochemical reactions.
Another function of catalyst in living systems is that it allows chemical reactions to occur at temperatures at which the organism lives.
What can a nation do to improve the exchange rate of its currency?
A.
try to improve its balance of trade
B.
try to decrease its trade surplus
C.
try to lower its gross domestic product (GDP)
D.
try to export less while importing more
Answer:
A
Explanation:
balance the trades and improving them
Answer:
A:try to improve it's balance of trade
Explanation:
The part of an atom that has an overall positive charge is called
A)
an electron
B)
the nucleus
C)
the first shell
D)
the valence shell
Answer: I think it’s B
_______ reach the surface first during an earthquake.
Rayleigh waves
P waves
Love waves
S waves
the correct sequence where reactivity towards oxygen increases.
Answer:
Option D is good to go!
Explanation: as per the reactivity series more reactive substances will react with the counterpart substance.The most reactive substance here is calcium while the least reactive is aluminium, the magnesium comes in between.As per their reactivity, these substances will react with oxygen.
Explanation:
Which of the following represents an element ? H2O H2 NaCl CaCO3
Answer:
H₂
Explanation:
H₂ is hydrogen in its elemental form.
H₂O, NaCl, and CaCO₃ are all examples of elements added together to create compounds.
Struggling on this problem.
Answer:
4Al + 3O2 ----> 2Al2O3
Explanation:
first blank 4
second blank 3
third blank 2
How or why does lead affect bones and teeth?
Answer:
Lead can harm production of blood cells and the absorption of calcium needed for strong bones and teeth, muscle movements, and the work of nerves and blood vessels. High lead levels can cause brain and kidney damage.
thanks
Once lead enters the body, it is distributed to organs such as the brain, kidneys, liver and bones. The body stores lead in the teeth and bones where it accumulates over time. Lead stored in bone may be remobilized into the blood during pregnancy, thus exposing the fetus.
Fill in the coefficients that will balance the following reaction:
Which of these takes place when a chemical change occurs? option 1: Bonds connecting atoms in products and reactants form. option 2: Bonds connecting atoms in products and reactants break. option 3: Bonds connecting atoms in reactants break, and bonds connecting atoms in products form. option 4: Bonds connecting atoms in reactants form, and bonds connecting atoms in products break.
Answer: Out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
Explanation:
A change that leads to the change in chemical composition of a substance is called a chemical change.
For example, [tex]2NH_{3} \rightarrow N_{2} + 3H_{2}[/tex]
Here, bond between the reactant atoms nitrogen and hydrogen is broken down.
On the other hand, bond connecting the products that is [tex]N_{2}[/tex] and [tex]H_{2}[/tex] is formed.
Thus,, we can conclude that out of the given options bonds connecting atoms in reactants break, and bonds connecting atoms in products form are the changes which takes place when a chemical change occurs.
What type of molecule is shown below?
A. Ether
B. Alcohol
C. Aldehyde
D. Ketone
The given molecule is an aldehyde with the formula HCHO. It is the simplest and primary aldehyde . Hence, option c is correct.
What are aldehydes ?Aldehydes are a class of organic compounds that contain a carbonyl group (a carbon double-bonded to an oxygen) at the end of a carbon chain. The general formula for an aldehyde is RCHO, where R is a substituent or side chain attached to the carbonyl group.
Aldehydes are often characterized by their distinctive odor, which can be described as pungent and irritating. Some common aldehydes include formaldehyde (used in building materials and as a disinfectant), acetaldehyde (found in alcoholic beverages), and benzaldehyde (used in food flavorings).
Aldehydes are important intermediates in many chemical reactions, and they are used in a variety of industrial and laboratory applications. They can be synthesized by the oxidation of primary alcohols or by the partial oxidation of hydrocarbons. The given compound is formaldehyde HCHO.
Find more on aldehydes:
https://brainly.com/question/30902678
#SPJ7