Answer:
b is the correct answer ok
A solution is made up of solute and solvent. It is an addition of two or more substances to each other that combines physically and chemically. Thus, option B is correct.
What is a solution?A solution is the mixture of solutes that can be more than one in a solvent that has the same composition all over (homogenous). A solution comprises two main elements called a solute and a solvent.
A solute is the part of the solution that has been added to the solvent for desolvation. On the other hand, the solvent is the substance that dissolves the solute in them to make a solution.
The homogenous mixture or the solution can be created by mixing salt and water, sugar and water, mercury in amalgamated zinc, coffee, vinegar, etc.
Therefore, option B. a solution is the addition of the substances that combine physically.
Learn more about solutions here:
https://brainly.com/question/13790411
#SPJ2
Describe how you would prepare a supersaturated solution
Answer:
A supersaturated solution contains more dissolved solute than required for preparing a saturated solution and can be prepared by heating a saturated solution, adding more solute, and then cooling it gently. Excess dissolved solute crystallizes by seeding supersaturated solution with a few crystals of the solute.
Explanation:
Cual es la longitud de onda de un foton emitido durante la transicion desde el stado n=5 al estado n=3 en atomo Hidrogeno? Dar como respuesta de la longitud de onda en nm (nanometros)
Answer:
1302 nm
Explanation:
Del formulario de Rydberg para longitud de onda
1 / λ = R (1 / nf ^ 2 - 1 / ni ^ 2)
1 / λ = 1.097 × 10 ^ 7 (1/3 ^ 2 - 1/5 ^ 2)
1 / λ = 1.097 × 10 ^ 7 (0.11 - 0.04)
1 / λ = 1.097 × 10 ^ 7 (0.07)
= 1,302 × 10 ^ -6 m
o 1302 nm
calculate the volume in L od 2.11mol/L CuSo4(aq) solution that contains 0.41 mol copper(2) sulfate
Answer:
0.194L
Explanation:
Molarity of a solution is its molar concentration, and can be calculated using the formula:
Molarity = no. of moles (n) ÷ volume (V)
According to this question, the molar concentration/molarity of a solution of copper sulfate (CuSO4) is 2.11mol/L and contains 0.41 mol CuSO4. The volume can be calculated as follows;
Volume = no. of moles ÷ molarity
Volume = 0.41mol ÷ 2.11mol/L
V = 0.194 liter
Calculate the mass percent of carbon,oxygen, nitrogen and hydrogen in acetamide, C2H5NO.
Molar Mass:
O=16, N=14,C=12, H =1.
Answer:
40.68 % C
23.73 % N
8.47% H
27.12% O
Explanation:
The mass percent of an element X in a compound is calculated as the molar mass (MM) of X multiplied by the number of atoms of X in the compound, divided into the molecular weight (MW) of the compound, as follows:
mass percent of X = (MM(X) x number of atoms of X)/MW compound x 100
Thus, we first calculate the MW of acetamide (C₂H₅NO) by using the molar mass of the chemical elements C, H, N and O:
MW(C₂H₅NO) = (12 g/mol C x 2) + (1 g/mol H x 5) + 14 g/mol N + 16 g/mol O = 59 g/mol
Now, we can calculate the mass percent of each element (C, H, N, O) in C₂H₅NO:
Mass percent of C (2 atoms of C in 1 molecule of C₂H₅NO):% mass C = (12 g/mol x 2)/(59 g/mol) x 100 = 40.68 %
Mass percent of N (1 atom of N in 1 molecule of C₂H₅NO):% mass N = (14 g/mol x 1)/(59 g/mol) x 100 = 23.73 %
Mass percent of H (5 atoms of H in 1 molecule of C₂H₅NO):
% mass H = (1 g/mol x 5)/(59 g/mol) x 100 = 8.47 %
Mass percent of O (1 atom of O in 1 molecule of C₂H₅NO):
% mass O = (16 g/mol x 1)/(59 g/mol) x 100 = 27.12 %
The sum of the mass percents has to be equal to 100%:
40.68 % C + 23.73 % N + 8.47% H + 27.12% O = 100%
what is the temperature in kelvins of 23 Celsius? hurry pls
Answer:
23°C + 273.15 = 296.15K
I HOPE ITS RIGHT IF NOT THEN SORRYHAVE A GREAT DAY :)
Name the following compound NiBr2?
Answer:
the Name of NiBr2 is
Nickel(II) bromide
Why boiling point is less at hilly station?
if shoto todoroki has a half hot half cold quirk and he eats a ice cube does one half melt and one half freeze
Answer:
in a way yes and no
Explanation:
shoto can control the temperature of both of his quirks so one can over power the other
he can melt the ice with the fire
and freeze the fire over the ice
hope it helps
Identifica las formas de energía mecánica
(cinética y potencial) que tienen lugar en diferentes puntos del movimiento en
un sistema mecánico (caída libre, montaña rusa, péndulo).
2 Tipos de Energía Mecánica
2.1 1. Energía hidráulica
2.2 2. Energía eólica
2.3 3. Energía Mareomotriz
3 Ejemplos de Energía Mecánica
3.1 1. Planta hidroeléctrica
3.2 2. Máquinas de Vapor
3.3 3. Motor de Combustión interna
3.4 4. Molinos de Viento
3.5 5. Un Juego de Billar
3.6 6. Motor eléctrico
3.7 7. Locomotora
3.8 8. Bala
3.9 9. Una pistola de Dardos
3.10 10. Pelota sobre una mesa
https://www.aura-energia.com/ejemplos-de-energia-mecanica/
Which of these provides the most creative explanation for how rocks are made at present?
Law of Superposition
O Law of Unconformities
Principle of Uniformitarianism
O Principle of Original Horizontality
Answer:
Principle of Original Horizontality
How does the arrangement of particles determine the physical properties of different states of matter?
Answer:
See explanation
Explanation:
Matter may exist in three phases; solid, liquid and gas. The state in which matter exists depends on the extent of intermolecular forces operating in the substance.
In solid particles, the molecules that compose the solid are close together because the molecules of a solid do not move from place to place but they continue to vibrate about their fixed position.
For liquids, the molecules that compose a liquid are in random motion but are less energetic than molecules of a gas.
In gases, the molecules are not held together at all. The molecules of a gas have the highest degree of freedom. They move from one point another at a high velocity.
Hence, the order of increasing degree of movement of the particles in different states of matter = solids<liquids< gases.
Solids have well arranged particles, the molecules of a liquid are a little more disorderly than liquid particles while gas particles are the most disorderly of all the states of matter.
Which of the following are properties of metalloids?
A. Semi-conductors
B. All of these
C. React like metals sometimes
D. React like non-metals sometimes
Answer:
all of these are properties of metalloids
Answer:
The answer is B. All of these
Explanation:
Can you mark me the brainliest?
An unknown compound has the following chemical formula: NxO
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains 5.2 mol of nitrogen and 2.65 mol of oxygen
Write the complete chemical formula for the unknown compound.
Taking into account the definition of empirical formula, the complete chemical formula for the unknown compound is N₂O.
The empirical formula of a chemical compound shows the ratio between the atoms of the compound. That is, it indicates which elements are present and the minimum ratio in whole numbers between their atoms. The empirical formula is the simplest chemical formula for a chemical compound, which is why it is also called the minimum formula.
The empirical formula must be expressed using integer relationships, then to obtain this formula, divide the numbers of moles by the smallest result of them. In this case:
Nitrogen: [tex]\frac{5.2 moles}{2.65 moles}[/tex]= 1.96 moles ≅ 2 moles
Oxygen [tex]\frac{2.65 moles}{2.65 moles}[/tex]= 1 mole
Being the chemical formula of hte compound NxO, where x stands for a whole number, this indicates that the elements N and O are in the compound in a whole number ratio of x: 1. Then, as in the empirical formula, the numbers of moles must be expressed in whole numbers, as previously calculated, the value of x must be 2.
In summary, the complete chemical formula for the unknown compound is N₂O.
Learn more about empirical formula and its difference with molecular formula: https://brainly.com/question/13058832?referrer=searchResults
chemical formula of magnesium nitrate
Hello.
Magnesium nitrate is a chemical compound with the formula Mg (NO₃) ₂. Magnesium nitrate is an inorganic salt very soluble in water and alcohol and has the appearance of fine white crystals.
Magnesium Nitrate is commonly used as a fertilizer due to its high nutritional value, since it provides Magnesium and Nitrogen, these are important nutrients in the growth of crops. It is a water soluble fertilizer. Contains 10.5% N - 15.6% MgO. Provides nitrogen in the form of nitrate.
Por favor, necesito ayuda, es urgente!!!
Answer:
what type of language this is ??
A chemist wait out 87.1 g of sodium. Calculate the number of moles of sodium she weighed out. Round your answer to three significant digits
here's the answer to your question
Which statement describes the "Law of Conservation of Mass" for the following reaction?
4 Fe + 302 -
2 Fe₂O₃
Select one:
tion
a.
grams of Fe + grams of Fe2O3 = grams of O2
O b. grams of O2 + grams of Fe2O3 = grams of Fe
O c. grams of Fe +grams of O2 = grams of Fe203
O d. None of these.
Name this ionic compound.
Answer:
c
Explanation:
2. Sulfur dioxide gas (SO2) reacts with excess oxygen gas (O2) and excess liquid water (H2O) to form liquid sulfuric acid (H2SO4). In the laboratory, a chemist carries out this reaction with 67.2 L of sulfur dioxide and gets 250 g of sulfuric acid.
• Write a balanced equation for the reaction.
• Calculate the theoretical yield of sulfuric acid.
• Calculate the percent yield of the reaction.
(One mole of any gas occupies 22.4 L under certain conditions of temperature and pressure. Assume those conditions for this question.)
Answer:
See explanation
Explanation:
The balanced equation for the formation of sulphuric acid is;
2SO2 + O2 + 2H2O → 2H2SO4
If 1 mole of SO2 occupies 22.4 L
x moles occupy 67.2 L
x = 1 × 67.2/22.4
x= 3 moles
From the reaction equation;
2 moles of SO2 yields 2 moles of H2SO4
Hence 3 moles of SO2 also yields 3 moles of H2SO4
Theoretical yield of H2SO4 = 3 moles × 98 g/mol = 294 g
Percent yield = actual yield/theoretical yield × 100
Percent yield = 250g/294g × 100
Percent yield = 85%
Why slaked lime is used for white wash?
[tex]here \: is \: your \: answer[/tex]
Solution used to white wash the walls is Quick lime(CaO) and when it is mixed with slaked lime [Ca(OH)2]. When this paste is used for white washing it combines with atmospheric CO2 to form calcium carbonate (CaCO3) which gives it a shiny texture.
Which of the following is true for the equilibrium constant of a reaction?
It is a ratio of the concentrations in a reaction.
It remains the same at different temperatures.
It is represented by the symbol H.
Its value is always close to 1.
Answer:
The correct answer is It is a ratio of the concentrations in a reaction.
Explanation:
⇒ It is a ratio of the concentrations in a reaction.
This sentence is true because the equilibrium constant is calculated from the product of the concentration of the reaction products divided into the product of the concentrations of the reactants, each concentration raised by the stoichiometric coefficient. For example, for the following reaction:
aA + bB → cC + dD
The equilibrium constant is expressed as:
[tex]K = \frac{[C]^{c}[D]^{d} }{[A]^{a} [B]^{b} }[/tex]
⇒ It remains the same at different temperatures.
The sentence is false because the equilibrium constant changes with the temperature. In general, an endothermic reaction is favored by the increment of temperature (the equilibrium shifts to the right side) and disfavored with the decrease in temperature (shifts to the left).
⇒ It is represented by the symbol H.
This sentence is false because the equilibrium constant is represented with the letter K.
⇒ Its value is always close to 1.
It is not true because the equilibrium constant can be a number below or above 1.
K < 1 ⇒ there is more concentration of reactants at equilibrium
K > 1 ⇒ there is more concentration of products at equilibrium
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over the next few minutes?
Molecules in both the metal and the surrounding air will start moving at lower speeds.
Molecules in both the metal and the surrounding air will start moving at higher speeds.
The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up.
The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
d. The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Explanation:
hopes this helps
sorry if it doesn't
:)
Isotopes (such as hydrogen-1, hydrogen-2, and hydrogen-3) are the atoms of
the same element that differ in:
Answer:
The number of neutrons in nucleus
The intermediate product formed during the production of urea is,
Answer:
Arginine is intermediate product formed during the production of urea
The key combination is ornithine, on which the urea molecule is 'created'; intermediates in the procedure contain citrulline and arginine.
What is the Production of Urea?
The urea cycle is a procedure of conversion of toxic ammonia to negligibly toxic urea. Consequences of the urea cycle are 1 molecule of urea, 2 molecules of ADP, and 1 molecule of both AMP and fumaric acid.
When Ammonia and carbon dioxide recovery During urea decomposition a mixture of gaseous carbon dioxide and also ammonia is accumulated and also immersed into a dilute aqueous urea resolution.
Find more information about Production of Urea here:
https://brainly.com/question/13599932
Two solids of identical mass, A and B, are analyzed using identical calorimeters. Each calorimeter contains the same amount of water and is at room temperature. When the solids are heated to the same initial temperature and placed in their calorimeters, the final temperature of solid A's calorimeter is higher than that of B. What can we infer from this
Answer:
Specific heat of solid A is greater than specific heat of solid B.
Explanation:
In the calorimeter, as the temperature is increasing, the vibrational kinetic energy will increase and this means that additional amount of energy will be needed to increase the temperature by the same value. Therefore, we can conclude that specific heat increases as temperature increases.
Now, we are told that the final temperature of solid A's calorimeter is higher than that of B.
This means from our definition earlier, Solid A will have a higher specific heat that solid B.
A mass of 2.20 kg of sodium phosphate is converted number of moles
Explanation:
here's the answer to your question
13.41 moles are present in 2.20 kg of sodium phosphate.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex]of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
The molar mass of sodium phosphate is 163.94 g/mol.
2.20 kg = 2200g
[tex]Moles = \frac{2200g}{163.94 g/mol.}[/tex]
Moles = 13.41954374 = 13.41 moles
Hence, 13.41 moles are present in 2.20 kg of sodium phosphate.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ2
How many moles of tungsten are in 415 grams of tungsten?
Answer:2.26
Explanation:
hi can anyone help me with a gas law device
Explanation:
The Gas Law Apparatus is a high-quality demonstrator of the relationship between pressure, volume and temperature of a gas. The pressure gauge shows how pressure affects volume and vice versa. A digital thermometer displays the temperature.
How many atoms are in 9.35 moles of lithium?
Answer:
Answer: 9.35 moles Li contains 2.08 × 10 (to the power of)24 atoms .
Explanation:
a water tank is filled with water up to 3.5 m height caluclate the pressure given by the tanks at its bottom
Answer:
eşnatto
Luch bresder sksksjskdnsldkspdm
What is the name if this compound? C6H5-C-H=O
Answer:
Benzaldehyde (C6H5CHO) is an organic compound consisting of a benzene ring with a formyl substituent. It is the simplest aromatic aldehyde and one of the most industrially useful.
