Hypochlorous acid (HClO) is a weak acid. The conjugate base of this acid is the hypochlorite ion (ClO−).
Wrtie a balanced equation showing the reaction of HClO with water. Include phase symbols.
balanced equation:
HClO(aq)+
Write a balanced equation showing the reaction of ClO− with water. Include phase symbols.
balanced equation

Answers

Answer 1

The chemical equation for ClO- and water represents a base equilibrium reaction. The equation indicates that ClO- and H2O are the reactants, while

HClO and OH-

are the products. Hypochlorite ion

(ClO-)

can accept a proton (H+) from water and produce hypochlorous acid (HClO) and hydroxide ion (OH-).

The balanced equation for the reaction of Hypochlorous acid (HClO) with water and the balanced equation for the reaction of ClO- with water is provided below.Balanced equation for the reaction of HClO with water:

HClO(aq) + H2O(l) ⇌ H3O+(aq) + ClO-(aq)

Balanced equation for the reaction of ClO- with water:

ClO-(aq) + H2O(l) ⇌ HClO(aq) + OH-(aq)

Explanation:The chemical equation represents the reaction between HClO and water, it is an acid-base equilibrium reaction. The equation indicates that HClO and H2O are the reactants, while ClO- and H3O+ are the products. Hypochlorous acid is a weak acid that dissociates only partially in water. It can accept a proton (H+) from water and produce hypochlorite ion (ClO-) and hydronium ion (H3O+).The chemical equation for ClO- and water represents a base equilibrium reaction. The equation indicates that ClO- and H2O are the reactants, while HClO and OH- are the products. Hypochlorite ion (ClO-) can accept a proton (H+) from water and produce hypochlorous acid (HClO) and hydroxide ion (OH-).

To know more about chemical equation visit:

https://brainly.com/question/28792948

#SPJ11


Related Questions

Given the following compounds which would decrease the vapor pressure of 10 L of water the most? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a 1.0 mol CaCl2 b 2.0 mol Naci с 1.5 mol MgCl2 d 3.0 mol C3H802

Answers

Among the given options, the compound that would decrease the vapor pressure of 10 L of water the most is 3.0 mol C3H802.How to calculate the vapor pressure of solutions? Vapor pressure is defined as the pressure exerted by the vapor of a substance in equilibrium with its liquid or solid phase at a given temperature.

For ideal solutions, the vapor pressure is directly proportional to the mole fraction of the substance in the solution, given as:P1 = X1*P1°Where, P1 is the vapor pressure of the substance in the solution, X1 is the mole fraction of the substance in the solution, and P1° is the vapor pressure of the pure substance at the same temperature. Now, coming to the given compounds, all the options are solutes added to water to form a solution. The vapor pressure of water will decrease when solutes are added to it because of the reduced number of water molecules on the surface of the solution, which can evaporate.

Let us calculate the mole fraction of each solute in their respective solution with water.a) CaCl2:CaCl2 dissociates into three ions in water: Ca2+, 2Cl-. Therefore, the number of solute particles in the solution will be 3*1.0 mol = 3.0 mol.

Read more about equilibrium here;https://brainly.com/question/517289

#SPJ11

The absolute pressure at the bottom of a container of fluid is 140kPa. One layer of fluid is clearly water with a depth of 20cm. The other mysterious fluid though has a depth of 30cm. a) What is the density of the unknown fluid?
b) Which layer is on top in the container?

Answers

a). Thus, the density of the unknown fluid is 720 kg/m³. b).  So, the water layer is at the bottom and the unknown fluid layer is on top in the container. are the answers

Given data Absolute pressure at the bottom of the container of fluid = 140kPa

Depth of the water layer = 20 cm

Depth of the unknown fluid layer = 30 cm

a) Density of the unknown fluid

Let the density of the unknown fluid be ρ2 Formula used

Pressure = Density × gravity × height + Atmospheric pressure

At the bottom of the

container Pressure = Density × gravity × height + Atmospheric pressure

140 kPa = ρ1 × 9.8 m/s² × (0.2 + 0.3) m + atmospheric pressure

Also, Density of water = 1000 kg/m³

We need to find the density of the unknown fluid i.e. ρ2

Thus, the density of the unknown fluid is 720 kg/m³

b) Layer which is on top in the container

Water is denser than the unknown fluid

So, the water layer is at the bottom and the unknown fluid layer is on top in the container.

Hence, option (C) is correct.

to know more about density visit:

https://brainly.com/question/29775886

#SPJ11

a) The density of the unknown fluid is 478.48 kg/m³.

b) The layer of the unknown fluid is on top of the container.

Given that the absolute pressure at the bottom of a container of fluid is 140 kPa. One layer of fluid is clearly water with a depth of 20 cm. The other mysterious fluid though has a depth of 30 cm. We need to find out the density of the unknown fluid and also identify which layer is on top of the container.

We know that the pressure at the bottom of a container of fluid is given by the formula:

P = hρg

Where,

P is the absolute pressure

h is the depth

ρ is the density

g is the acceleration due to gravity

Substituting the given values in the formula, for water,

P = hρg

140 × 10³ = 20 × ρ × 9.81

ρ = 716.92 kg/m³

Similarly for the other fluid,

P = hρg

140 × 10³ = 30 × ρ × 9.81

ρ = 478.48 kg/m³

Therefore, the density of the unknown fluid is 478.48 kg/m³.

Now, to identify the layer that is on top in the container, we need to compare the densities of the two layers. The layer with the lower density will be on top. Here, we can see that the density of water (which is 716.92 kg/m³) is greater than the density of the unknown fluid (which is 478.48 kg/m³). Therefore, the layer of the unknown fluid is on top of the container.

Learn more about density here: https://brainly.com/question/26364788

#SPJ11

or the following exothermic reaction at equilibrium:
H2O (g) + CO (g) <=> CO2(g) + H2(g)
Decide if each of the following changes will increase the value of K (T = temperature).
a) Decrease the volume (constant T)
b) Remove CO (constant T)
c) Add a catalyst (constant T)
d) Decrease the T
e) Add CO (constant T)
f) Add Ne(g) (constant T)
g) Increase the T

Answers

The effect of different changes on the value of K is to be determined for the given exothermic reaction at equilibrium:H2O(g) + CO(g) ⇌ CO2(g) + H2(g) Changes that increase the value of K.

Increasing the temperature (Option g) Decreasing the volume (Option a)Increasing the concentration of CO (Option e)Adding a catalyst (Option c)Increasing the pressure is equivalent to decreasing the volume as the temperature is constant. Le Chatelier’s principle states that increasing the pressure shifts the equilibrium in the direction of fewer moles of gas. In this reaction, there are two moles of gas on the left and two on the right, so the equilibrium position is not affected.

Decreasing the temperature, Option d, will shift the equilibrium towards the reactants, as the reaction is exothermic and heat is treated as a reactant. Adding a non-reactive gas like Ne, Option f, will not affect the equilibrium position, as the mole fraction of reactants and products will remain unchanged. Therefore, the value of K will not change.Remove CO, Option b, will shift the equilibrium position towards the reactants and decrease the value of K.

To know more about H2O(g) + CO(g) ⇌ CO2(g) + H2(g)  visit :

https://brainly.com/question/15283608

#SPJ11

methamphetamine and cocaine are the most widely used stimulant drugs in the world.

Answers

Methamphetamine and cocaine are the most widely used stimulant drugs in the world. This statement is False.

While methamphetamine and cocaine are indeed stimulant drugs, it is not accurate to say that they are the most widely used stimulant drugs in the world. The term "widely used" can have different interpretations, such as considering prevalence rates, total number of users, or global consumption patterns.In terms of prevalence rates and total number of users, substances such as caffeine and nicotine are far more widely used stimulants. Caffeine, found in coffee, tea, and various beverages, is consumed by a large portion of the global population. Nicotine, found in tobacco products, is also widely used, although efforts to reduce smoking rates have been made in many countries.It's important to note that drug use patterns can vary across regions and populations, and there may be other stimulant drugs that are more prevalent in specific areas. Therefore, it is more accurate to say that methamphetamine and cocaine are among the commonly used stimulant drugs, but not necessarily the most widely used worldwide.

To know more about cocaine, click here https://brainly.com/question/32342551

#SPJ11

Sodium hydroxide (NaOH) is a strong base that is very corrosive. What is the mass of 2.75 × 10-4 moles of NaOH?
a.3.24 x 10–3 g NaOH
b.1.10 x 10–2 g NaOH
c.6.10 x 10–2 g NaOH
d.6.50 x 10–2 g NaOH

Answers

NaOH has a molar mass of 40 g/mol. Thus, the mass of 2.75 × 10-4 moles of NaOH is b.1.10 x 10–2 g NaOH. Answer: b.1.10 x 10–2 g NaOH

We can use the formula; m = n × M, where m = mass (in grams), n = number of moles, and M = molar mass of NaOH. The molar mass of NaOH is 40 g/mol. Thus, the mass of 2.75 × 10-4 moles of NaOH can be calculated as follows:

m = n × M= 2.75 × 10-4 moles × 40 g/mol= 0.011 g or 1.10 × 10-2 g NaOH has a molar mass of 40 g/mol. Thus, the mass of 2.75 × 10-4 moles of NaOH is b.1.10 x 10–2 g NaOH.

Answer: b.1.10 x 10–2 g NaOH

To know more about NaOH visit:

https://brainly.com/question/20573731

#SPJ11

what volume (in ml) of 0.250 m hcl would be required to completely react with 4.10 g of al in the following chemical reaction? 2 al(s) 6 hcl(aq) → 2 alcl₃ (aq) 3 h₂(g)

Answers

1823 mL of 0.250 M HCl are required to completely react with 4.10 g of Al. The balanced chemical equation is: 2Al (s) + 6HCl (aq) → 2AlCl3 (aq) + 3H2 (g)The molar mass of Al is 27 g/mol.

The given mass of Al is 4.10 g.Convert the mass of Al to moles:4.10 g Al × (1 mol Al/27 g Al) = 0.1519 mol AlAccording to the balanced chemical equation, the reaction of 2 moles of Al with 6 moles of HCl will produce 2 moles of AlCl3. This can be used to calculate the moles of HCl required to react with the given mass of Al

The volume (in mL) of 0.250 M HCl required to react with 0.4557 mol HCl can be calculated using the formula:Mo l a r i t y ( M ) = n u m b e r o f m o l e s o f s o l u t e v o l u m e o f s o l u t i o n i n l i t e r s0.250 M = 0.4557 mol HCl/VHClVHCl = 0.4557 mol HCl/0.250 M = 1.823 LConvert 1.823 L to mL:1 L = 1000 mL1.823 L = 1823 mL.

To know more about chemical equation visit:-

https://brainly.com/question/28792948

#SPJ11

draw the final products for the following two step reaction. the nucleophile selectively reacts once in each step.

Answers

The final products for the two-step reaction where the nucleophile selectively reacts once in each step reaction.

In a two-step reaction where the nucleophile selectively reacts once in each step, the reaction occurs in two steps.Step 1: In the first step, the nucleophile reacts with the given substrate to form an intermediate. Step 2: In the second step, the intermediate formed in the first step undergoes a reaction with the second reactant to form the final product.

The final products of the two-step reaction where the nucleophile selectively reacts once in each step are as follows: Step 1: The nucleophile attacks the substrate to form an intermediate Step 2: The intermediate formed in the first step reacts with the second reactant to form the final product.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

the imidazole side chain of histidine can function as either a general acid catalyst or a general base catalyst because _____.

Answers

If the pH of the environment is greater than the pKa of the imidazole side chain, the imidazole will be deprotonated and will function as a general base catalyst by accepting a proton.

The imidazole side chain of histidine can function as either a general acid catalyst or a general base catalyst because it can donate or accept a proton, depending on the pH of the environment. In its neutral form, the imidazole side chain has a pKa of approximately 6, which means that it can act as either an acid or a base at physiological pH.A general acid catalyst is a molecule that donates a proton to a substrate, while a general base catalyst is a molecule that accepts a proton from a substrate. The imidazole side chain of histidine can perform both functions because it has a pKa that is close to physiological pH. If the pH of the environment is less than the pKa of the imidazole side chain, the imidazole will be protonated and will function as a general acid catalyst by donating a proton. If the pH of the environment is greater than the pKa of the imidazole side chain, the imidazole will be deprotonated and will function as a general base catalyst by accepting a proton.

To know more about imidazole visit:

https://brainly.com/question/30903179

#SPJ11

acetylene is unstable at temperatures above ____ fahrenheit.

Answers

Acetylene is unstable at temperatures above 300 degrees fahrenheit.

At temperatures, more than 149 degrees Celsius (300 degrees Fahrenheit), acetylene (C2H2) is typically regarded as unstable.

Acetylene can undergo a self-decomposition reaction at temperatures over this limit, resulting in a highly exothermic and perhaps explosive decomposition.

Acetylene is often carried and stored in specialised containers made to reduce the risk of temperature and pressure accumulation in order to ensure safe handling and storage.

Acetylene can become highly reactive and prone to breakdown at temperatures higher than this, resulting in dangerous situations and the possibility of explosions.

To reduce the hazards, handling and storing acetylene safely is essential while adhering to all applicable laws and regulations.

To learn more about Acetylene, visit:

https://brainly.com/question/20529866

#SPJ11

Which of the following best describes what happens to calcium ions during the relaxation period (phase) of a muscle twitch? They are being actively pumped back into the transverse tubules (T-tubules) They are undergoing passive transport back into the sarcoplasmic reticulum They are undergoing passive transport back into the transverse tubules (T-tubules) They are being actively pumped back into the sarcoplasmic reticulum

Answers

During the relaxation period of a muscle twitch, calcium ions are undergoing passive transport back into the sarcoplasmic reticulum.

What happens to calcium ions during the relaxation period of a muscle twitch?

After a muscle contraction, during the relaxation period, the muscle fiber returns to its resting state. During this phase, calcium ions play a crucial role.

Calcium ions are released from the sarcoplasmic reticulum into the sarcoplasm during muscle contraction, allowing the myosin heads to bind with actin filaments and initiate muscle contraction. However, once the contraction is complete, the muscle fiber needs to relax and prepare for the next contraction.

During the relaxation period, calcium ions are actively transported back into the sarcoplasmic reticulum. This active transport process requires energy in the form of ATP and is facilitated by calcium pumps located in the membrane of the sarcoplasmic reticulum.

By actively pumping calcium ions back into the sarcoplasmic reticulum, the concentration of calcium in the sarcoplasm decreases, leading to the relaxation of the muscle fiber.

Learn more about calcium ions

brainly.com/question/12985536

#SPJ11

what is the total number of valence electrons in the lewis structure of aso2-?

Answers

The Lewis structure of [tex]AsO_2^-[/tex] has a total of 18 valence electrons. To determine the total number of valence electrons in the Lewis structure of AsO2-, we need to consider the valence electrons of each individual atom.

Arsenic (As) is in Group 15 of the periodic table, so it has 5 valence electrons. Oxygen (O) is in Group 16, so it has 6 valence electrons each. The -1 charge on the [tex]AsO_2^-[/tex] ion indicates the gain of an additional electron.

To calculate the total number of valence electrons, we sum the valence electrons from each atom and then subtract one electron due to the negative charge.

In this case, we have 5 valence electrons for arsenic and 6 valence electrons each for the two oxygen atoms, totalling 17 electrons. Subtracting one electron for the negative charge gives us a total of 16 valence electrons in the [tex]AsO_2^-[/tex] ion.

Therefore, the Lewis structure of [tex]AsO_2^-[/tex] has a total of 18 valence electrons.

Learn more about Lewis structures here:

https://brainly.com/question/29603042

#SPJ11

Regenerate response

1a. If 0.619 g of magnesium hydroxide reacts with 0.940 g of sulfuric acid, what is the mass of magnesium sulfate produced? Mg(OH)2(s)+H2SO4(l)→MgSO4(s)+H2O(l)

Answers

The mass of magnesium sulfate produced is 0.929 g. To find the mass of magnesium sulfate produced, we first need to determine the limiting reactant. We can do this by calculating the moles of each reactant using their molar masses.

The molar mass of magnesium hydroxide (Mg(OH)2) is 58.33 g/mol, and the molar mass of sulfuric acid (H2SO4) is 98.09 g/mol.

The moles of magnesium hydroxide can be calculated as follows:

[tex]\[\text{{moles of Mg(OH)}}_2 = \frac{{\text{{mass of Mg(OH)}}_2}}{{\text{{molar mass of Mg(OH)}}_2}} = \frac{{0.619 \, \text{g}}}{{58.33 \, \text{g/mol}}} = 0.0106 \, \text{mol}\][/tex]

Similarly, the moles of sulfuric acid can be calculated as follows:

[tex]\[\text{{moles of H}}_2\text{{SO}}_4 = \frac{{\text{{mass of H}}_2\text{{SO}}_4}}{{\text{{molar mass of H}}_2\text{{SO}}_4}} = \frac{{0.940 \, \text{g}}}{{98.09 \, \text{g/mol}}} = 0.0096 \, \text{mol}\][/tex]

From the balanced chemical equation, we can see that the stoichiometric ratio between magnesium hydroxide and magnesium sulfate is 1:1. This means that for every 1 mole of magnesium hydroxide, we will produce 1 mole of magnesium sulfate.

Since the moles of sulfuric acid (0.0096 mol) are less than the moles of magnesium hydroxide (0.0106 mol), sulfuric acid is the limiting reactant. Therefore, all of the sulfuric acid will be consumed in the reaction.

The molar mass of magnesium sulfate (MgSO4) is 120.37 g/mol. Using the stoichiometry, we can calculate the mass of magnesium sulfate produced:

[tex]\[\text{{mass of MgSO}}_4 = \text{{moles of MgSO}}_4 \times \text{{molar mass of MgSO}}_4 = 0.0096 \, \text{mol} \times 120.37 \, \text{g/mol} = 0.929 \, \text{g}\][/tex]

Therefore, the mass of magnesium sulfate produced is 0.929 g.

To learn more about molar masses refer:

https://brainly.com/question/837939

#SPJ11

draw the organic product(s) of the following reaction. lithium diisopropylamide

Answers

The organic product of the reaction of lithium diisopropylamide is an anionic carbon species, which is a strong base. It can be used for deprotonation of a wide range of compounds.

Lithium diisopropylamide, commonly known as LDA, is a strong base used in organic synthesis. The main use of LDA is to deprotonate a wide range of organic compounds. When a compound containing an acidic hydrogen atom reacts with LDA, it undergoes deprotonation to give an anion.

Lithium diisopropylamide (LDA) is a strong base often used in organic chemistry to deprotonate a variety of organic compounds. In the presence of LDA, an anionic carbon species is produced by the removal of a proton (H+) from the acidic hydrogen of the starting compound.
To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

5. how much of an 800-gram sample of potassium-40 will remain after 3.9 × 10^9 years of radioactive decay?

Answers

Potassium-40 has a half-life of 1.28 x 10^9 years. The amount remaining of a substance undergoing radioactive decay can be determined using the formalin = N0 (1/2)^(t/t1/2)where:N0 is the initial amount is the elapsed timet1/2 is the half-life of the substances is the amount remaining after time pugging in the values:Given:N0 = 800 g t = 3.9 x 10^9 yearst1/2 = 1.28 x 10^9 years

Formula = N0 (1/2)^(t/t1/2)Substitute the values = 800 g (1/2)^(3.9 x 10^9 / 1.28 x 10^9) = 800 g (1/2)^3 = 800 g (0.125) = 100 g (to the nearest 10 g)Thus, 100 g of the 800-gram sample of potassium-40 will remain after 3.9 × 10^9 years of radioactive decay. Where: N(t) is the amount of the radioactive substance at time t N0 is the initial amount of the radioactive substance λ is the decay constant (related to the half-life) t is the time elapsed For potassium-40 (K-40), the half-life is approximately 1.25 billion years, or 1.25 × 10^9 years.

Read more about radioactive here;https://brainly.com/question/1236735

#SPJ11

what is the hybridization of the indicated n atom in the following compound?

Answers

The N atom has one lone pair of electrons.Therefore, the total number of hybrid orbitals needed by the N atom in this molecule = Number of sigma bonds + Number of lone pairs= 2 + 1 = 3 Since three hybrid orbitals are needed by N atom, it has sp hybridization.The hybridization of the indicated N atom in HCN is sp hybridized.

The given molecule is HCN. The indicated N atom in this compound is sp hybridized.What is hybridization?Hybridization is a phenomenon where two atomic orbitals combine to form new hybrid orbitals. The new hybrid orbitals will have the properties of both atomic orbitals from which they have been formed. This phenomenon is crucial in understanding the structure and properties of molecules.What is the hybridization of the indicated n atom in the following compound?The given molecule is HCN. In this molecule, the indicated N atom is present. To find the hybridization of this atom, we have to calculate the number of sigma bonds and lone pairs of electrons on the N atom.The N atom is bonded with C and H atoms. Therefore, it has two sigma bonds.The N atom has one lone pair of electrons.Therefore, the total number of hybrid orbitals needed by the N atom in this molecule = Number of sigma bonds + Number of lone pairs= 2 + 1 = 3Since three hybrid orbitals are needed by N atom, it has sp hybridization.The hybridization of the indicated N atom in HCN is sp hybridized.

To know more about hybrid orbitals visit:

https://brainly.com/question/30506016

#SPJ11

consider the reaction between iodine gas and chlroine agas a reaction mixture initally contains 0.25

Answers

The reaction between iodine gas and chlorine gas is investigated using a reaction mixture initially containing 0.25 moles iodine and 0.35 moles chlorine. Chemical equation is determined to be 1 mole of iodine reacting with 1 mole of chlorine to produce 2 moles of iodine chloride.

In this experiment, the reaction between iodine gas ([tex]I_2[/tex]) and chlorine gas ([tex]Cl_2[/tex]) is studied. The reaction mixture is prepared with an initial amount of 0.25 moles of iodine and 0.35 moles of chlorine. To understand the stoichiometry of the reaction, the balanced chemical equation is determined. Through experimentation, it is found that 1 mole of iodine reacts with 1 mole of chlorine to produce 2 moles of iodine chloride ([tex]ICl_2[/tex]).

Based on the given amounts of iodine and chlorine, it can be determined that there is an excess of chlorine gas in the reaction mixture. This is because the molar ratio between iodine and chlorine is 1:1, and there are more moles of chlorine present initially. Therefore, all of the iodine will be consumed in the reaction, while some chlorine will be left unreacted.

To obtain a more accurate understanding of the reaction, further experiments can be conducted by varying the initial amounts of iodine and chlorine. This would allow for a study of the reaction kinetics and the determination of the limiting reactant. Additionally, the products of the reaction can be analyzed using techniques such as spectroscopy to gain insights into the structure and properties of iodine chloride.

Learn more about stoichiometry here:  

https://brainly.com/question/28780091

#SPJ11

A biochemist completely digests a glycerophospholipid with a mixture of phospholipases A and D. HPLC and mass spectrometry analysis reveals the presence of an amino acid of 105.09 Da, a saturated fatty acid of 256.43 Da, and an omega-3 monounsaturated fatty acid of 282.45 Da.
Which amino acid does the glycerophospholipid contain? a. valine (C5H11NO2) b. alanine (C3H7NO2) c. serine (C3H7NO2) d. proline (C3H9NO2)

Answers

The amino acid that the glycerophospholipid contains is serine ([tex]C_3H_7NO_2[/tex]). Option c. is correct.

Phospholipases are enzymes that catalyze the hydrolysis of phospholipids into glycerophospholipids, fatty acids, and water. Glycerophospholipids have a glycerol backbone, which is attached to fatty acids and a phosphate-containing polar head group that is attached to an amino alcohol. They are a significant component of the cell membrane, as they provide a barrier between the interior and exterior of the cell.

They also serve as precursors for signaling molecules and other lipids. The mass spectrometry analysis of the completely digested glycerophospholipid reveals that the lipid contains an amino acid of 105.09 Da, a saturated fatty acid of 256.43 Da, and an omega-3 monounsaturated fatty acid of 282.45 Da.

The amino acid that has a mass of 105.09 Da is serine ([tex]C_3H_7NO_2[/tex]).Therefore, the correct answer is option c. serine ([tex]C_3H_7NO_2[/tex]).

To know more about amino acid refer here :

https://brainly.com/question/24106148

#SPJ11

What is the correct formula for sodium tetrachlorocobaltate(II)? a. Na2(CoCl6] b. Naz[CoCl4] c. Na4[CoCl4] d. Na[CoCl4] Oe. Na3[CoC14]

Answers

The correct formula for sodium tetrachlorocobaltate(II) is Na[CoCl4].

In this compound, sodium (Na) acts as the cation, while tetrachlorocobaltate(II) (CoCl4) is the anion. The formula indicates that there is one sodium ion (Na+) and one tetrachlorocobaltate(II) ion (CoCl4-) in the compound.The tetrachlorocobaltate(II) ion consists of a central cobalt atom (Co) surrounded by four chloride ions (Cl-). The cobalt atom has a +2 charge, and each chloride ion carries a -1 charge. By combining one cobalt ion and four chloride ions, the overall charge of the tetrachlorocobaltate(II) ion is -2, which balances the +2 charge of the sodium ion.The square brackets in the formula indicate that the tetrachlorocobaltate(II) ion is a discrete entity. It is important to note that the formula does not include any numerical coefficients for the ions, as they are assumed to be in their simplest ratio.Thus, the correct formula for sodium tetrachlorocobaltate(II) is Na[CoCl4].

To know more about compound, click here https://brainly.com/question/14117795

#SPJ11

the heat of fusion of water is 79.5 cal/g. this means 79.5 cal of energy are required to:

Answers

The heat of fusion of water is 79.5 cal /g. This means 79.5 cal of energy is required to melt one gram of ice at its melting point. Therefore, the answer is "melt one gram of ice at its melting point.

"What is the heat of fusion? The amount of heat required to transform a substance from its solid state to its liquid state without raising the temperature is known as the heat of fusion.

The heat of fusion of water is the quantity of energy required to melt a specific amount of ice at its melting point. The heat of fusion of water is 79.5 cal/g.

To know more about melting point refer to:

https://brainly.com/question/40140

#SPJ11

rust can be prevented by:select the correct answer below:
a.submerging the metallic
b.iron in waterapplying
c.paint to the iron magnetizing
d.the ironnone of the above

Answers

Rust can be prevented by applying paint to the iron. The correct answer is option c.

Rust refers to the reddish-brown iron oxide that forms on the surface of iron, particularly when exposed to moisture. Rust is a form of corrosion, which is a chemical reaction that occurs when metal surfaces come into touch with water, air, or other chemicals.

The prevention of rustThe following methods can be used to avoid rust:

Painting: Paint serves as a barrier between the surface of the metal and the environment, preventing corrosion or rust formation.

Galvanization: In this procedure, a protective layer of zinc is added to the metal surface, forming a barrier that prevents rust from forming.

Polishing: Polishing metal surfaces ensures that the surface is smooth, devoid of any rough spots that can act as rust initiation sites.

Therefore, the correct answer is option c. Paint to the iron

Learn more about rust here:

https://brainly.com/question/688285

#SPJ11

The standard free energy of formation of ammonia is −16.5 kJ/mol. N 2

(g)+3H 2

(g)⇌2NH 3

(g) 5th attempt What is the value of K for the reaction below at 555.0 K ?

Answers

the value of K for the reaction N₂(g) + 3H₂(g) ⇌ 2NH₃(g) at 555.0 K if the standard free energy of formation of ammonia is −16.5 kJ/mol is 4.75 × 10⁶.

The relationship between the standard free energy of the formation of a chemical compound and the equilibrium constant (K) of the reaction is given by the formula:

ΔG° = −RT ln(K)

Where:

R is the gas constantT is the temperature in KelvinΔG° is the standard free energy change of the reaction.

To calculate the value of K, the standard free energy change is given as ΔG° = −16.5 kJ/mol and at a temperature of 555 K:

K = e^(-ΔG° / RT)

K = e^(-(-16.5 × 10₃ J/mol) / (8.314 J/mol·K × 555 K))

K = 4.75 × 10⁶

Therefore, the value of K for the given reaction at 555 K is 4.75 × 10⁶.

Learn more about value of K: https://brainly.com/question/29892387

#SPJ11

Given that the standard free energy of formation of ammonia is −16.5 kJ/mol.

The balanced chemical equation for the reaction:

N2(g)+3H2(g) ⇌ 2NH3(g)

the value of K for the reaction = 3.17×10⁻¹²

Given that the standard free energy of formation of ammonia is −16.5 kJ/mol.

The balanced chemical equation for the reaction:

N2(g)+3H2(g) ⇌ 2NH3(g)

The standard free energy of reaction, ΔGºr is given by

ΔGºr=ΔGºf(products)−ΔGºf(reactants)

ΔGºr=2×ΔGºf(NH3)−ΔGºf(N2)−3×ΔGºf(H2)

Use the values of the standard free energy of formation of the elements and ammonia as given below,

ΔGºf(H2)=0 kJ/mol

ΔGºf(N2)=0 kJ/mol

ΔGºf(NH3)=−16.5 kJ/mol

Putting these values in the above equation we get,

ΔGºr=2×(−16.5 kJ/mol)−(0 kJ/mol)−3×(0 kJ/mol)ΔGºr=−33 kJ/mol

Now, we use the relation between ΔGºr and K given by,

ΔGºr=−RTlnK

At 555.0 K, we have R = 8.314 J/mol K

The value of T should be converted to Kelvin before substituting in the above equation.

So, the value of T = 555 K + 273 K = 828 K

Now, substituting the values of ΔGºr, R and T, we get,

−33 kJ/mol=−8.314 J/molK× 828KlnK
lnK=−33000J/mol−1×1kJ/1000J

lnK=−27.58K=3.17×10⁻¹²Answer: K = 3.17×10⁻¹²

To know more about free energy visit:

https://brainly.com/question/32260413

#SPJ11

1. How many ATOMS of hydrogen are present in 2.53 grams of water ? atoms of hydrogen .
2. How many GRAMS of oxygen are present in 4.74×1022 molecules of water ? grams of oxygen
3. How many MOLECULES of nitrogen dioxide are present in 4.25 grams of this compound ? molecules.
4. How many GRAMS of nitrogen dioxide are present in 3.05×1021 molecules of this compound ? Grams?
5. For the molecular compound xenon trioxide , what would you multiply "grams of XeO3 " by to get the units "molecules of XeO3 " ?

Answers

To determine the amount of grams of oxygen in 4.74 × 10²² molecules of water, we will use the formula; n=m/M, where n= number of moles, m=mass of the substance, M= molar mass of the substance. From the balanced equation of water (H2O), we know that 1 mole of water contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms.

1. In 2.53 grams of water, there are 2.85 × 10²³ atoms of hydrogen.

2. To determine the amount of grams of oxygen in 4.74 × 10²² molecules of water, we will use the formula; n=m/M, where n= number of moles, m=mass of the substance, M= molar mass of the substance. From the balanced equation of water (H2O), we know that 1 mole of water contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms. So, 1 mole of water = (2 × 1.01g) + (1 × 16g) = 18.02g

1 mole of water = 6.02 × 10²³ molecules of water.

Molar mass of water (H2O) = 18.02g/mol

Number of moles of water present in 4.74 × 10²² molecules of water; n=m/M; 4.74 × 10²² molecules × 1mol/6.02 × 10²³ molecules per mole = 0.788mol

Since the mole ratio of oxygen to water is 1:1, there are 0.788 moles of oxygen in 4.74 × 10²² molecules of water. Mass of oxygen = number of moles × molar mass= 0.788 mol × 16 g/mol= 12.6 g

Therefore, there are 12.6 grams of oxygen in 4.74 × 10²² molecules of water.

3. To calculate the number of molecules in 4.25 grams of nitrogen dioxide, we will use the formula, n = m/M, where n= number of moles, m= mass of the substance, M= molar mass of the substance. The formula of nitrogen dioxide (NO2) shows that it has 2 atoms of nitrogen and 2 atoms of oxygen. The molar mass of NO2 is 46 g/mol.

Mass of nitrogen dioxide = 4.25 g

Number of moles of NO2 present = 4.25 g/46 g/mol= 0.09239 mol

The number of molecules = number of moles × Avogadro's number= 0.09239 mol × 6.02 × 10²³ = 5.56 × 10²² molecules.

4. The mass of nitrogen dioxide present in 3.05 × 10²¹ molecules of this compound can be calculated as follows: The formula of nitrogen dioxide (NO2) shows that it has 2 atoms of nitrogen and 2 atoms of oxygen. The molar mass of NO2 is 46 g/mol. The number of moles of NO2 = number of molecules / Avogadro's number= 3.05 × 10²¹/6.02 × 10²³= 0.00507mol

The mass of nitrogen dioxide present = number of moles × molar mass= 0.00507 × 46= 0.23 g

5. The number of molecules of XeO3 can be calculated by multiplying the grams of XeO3 by Avogadro's number divided by molar mass. Therefore, to calculate the number of molecules of XeO3, we will use the formula;n = m/M × NA

Where; n=number of molecules, m= mass of the compound

M= molar mass of the compound

NA = Avogadro's number

Molar mass of XeO3 = 195.29g/mol

So, to get the units of "molecules of XeO3," you will multiply the grams of XeO3 by Avogadro's number divided by the molar mass of XeO3; n= m/M × NA= (grams of XeO3 / Molar mass of XeO3) × Avogadro's number= (grams of XeO3 / 195.29) × 6.02 × 10²³.

To know more about molar mass visit: https://brainly.com/question/12127540

#SPJ11

C6H5COOH(s) -- C6H5COO-(aq) + H+(aq)
Ka = 6.46 x 10e-5
Benzoic acid, C6H5COOH, dissociates in water as shown in the equation above. A 25.0 mL sample of an aqueous solution of pure benzoic acid is titrated using standardized 0.150 M NaOH.
After addition of 15.0 mL of the 0.150 M NaOH, the pH of the resulting solution is 4.37. Calculate the following:
The number of moles of NaOH added.
Please show steps.
Thank you in advance!

Answers

The number of moles of NaOH added is 0.00225 mol.

To calculate the number of moles of NaOH added, we can use the stoichiometry of the reaction between benzoic acid (C6H5COOH) and NaOH. According to the balanced equation, 1 mole of benzoic acid reacts with 1 mole of NaOH. Given that the concentration of NaOH is 0.150 M and 15.0 mL of NaOH solution is added, we can first convert the volume to liters by dividing it by 1000:
Volume of NaOH = 15.0 mL / 1000 mL/L = 0.015 L
Next, we can calculate the number of moles of NaOH using the formula:
moles of NaOH = concentration × volume
moles of NaOH = 0.150 M × 0.015 L = 0.00225 mol
Therefore, the number of moles of NaOH added is 0.00225 mol.

To know more about C6H5COOH, click here https://brainly.com/question/29206874

#SPJ11

what is the ph of a 0.125 m solution of barium butyrate at 25 °c?

Answers

The pH of a 0.125 M solution of barium butyrate at 25 °C is not readily determined without additional information.

To determine the pH of a solution, we need to know the nature of the compound and its dissociation behavior in water. Barium butyrate is a salt composed of the metal barium and the butyrate anion. Without specific information about the dissociation of barium butyrate in water and the presence of any acid-base reactions, we cannot directly calculate the pH of the solution.

However, we can make some general observations. Barium butyrate is a salt formed by the reaction of barium hydroxide (a strong base) and butyric acid (a weak acid). The barium ion (Ba²⁺) is the conjugate acid of a strong base, and the butyrate ion (C₄H₇O₂⁻) is the conjugate base of a weak acid.

Therefore, the solution of barium butyrate may have a slightly basic pH due to the presence of the barium hydroxide. However, the extent of this basicity will depend on the concentration of the barium hydroxide and the degree of dissociation of butyric acid.

In conclusion, without specific information about the dissociation behavior of barium butyrate and the presence of other acids or bases in the solution, the pH of a 0.125 M solution of barium butyrate at 25 °C cannot be determined accurately.

Learn more about pH here:

https://brainly.com/question/13213888

#SPJ11

The pH of a 0.125 M solution of barium butyrate at [tex]25^0C[/tex] depends on the dissociation of the compound in water, which can be determined using the ionization constant (Ka) and the concentration of the solution.

The pH of a solution is a measure of its acidity or basicity and is determined by the concentration of hydrogen ions ([tex]H^+[/tex]) present in the solution. To calculate the pH of a 0.125 M solution of barium butyrate, we need to consider the dissociation of the compound in water. Barium butyrate is a salt that dissociates into its constituent ions in solution, including the barium ion ([tex]Ba^2^+[/tex]) and the butyrate ion ([tex]C_4H_7O_2^-[/tex]).

To calculate the pH, we need to know the ionization constant (Ka) of butyric acid, the parent acid of butyrate. Assuming that the butyrate ion acts as a weak base, we can use the Ka value to determine the concentration of hydroxide ions ([tex]OH^-[/tex]) in the solution. From there, we can calculate the concentration of [tex]H^+[/tex] ions and convert it into pH.

Learn more about dissociation here:

https://brainly.com/question/31959301

#SPJ11

Aluminum is reacted with calcium chloride and produces calcium and aluminum chloride. If 4.7 grams of calcium chloride are completely used up in the
reaction, how many grams of calcium will be produced?

Answers

Approximately 1.693 grams of calcium will be produced when 4.7 grams of calcium chloride are completely used up in the reaction.

To determine the grams of calcium produced, we need to calculate the molar ratio between calcium chloride (CaCl2) and calcium (Ca) in the balanced chemical equation for the reaction. The balanced equation is:

2Al + 3CaCl2 → 3Ca + 2AlCl3

From the balanced equation, we can see that for every 3 moles of calcium chloride, 3 moles of calcium are produced. We need to convert the given mass of calcium chloride (4.7 grams) to moles using its molar mass.The molar mass of CaCl2 is calculated by adding the atomic masses of calcium (Ca) and chlorine (Cl). The atomic mass of calcium is 40.08 g/mol, and the atomic mass of chlorine is 35.45 g/mol.

Molar mass of CaCl2 = (40.08 g/mol) + 2(35.45 g/mol) = 110.98 g/mol

Now we can calculate the moles of calcium chloride:

Moles of CaCl2 = (mass of CaCl2) / (molar mass of CaCl2)

              = 4.7 g / 110.98 g/mol

              ≈ 0.0423 mol

Since the molar ratio between calcium chloride and calcium is 3:3, the moles of calcium produced will be equal to the moles of calcium chloride used.

Moles of Ca = 0.0423 mol

To convert moles of calcium to grams, we multiply by the molar mass of calcium:

Mass of Ca = (moles of Ca) × (molar mass of Ca)

          = 0.0423 mol × 40.08 g/mol

          ≈ 1.693 g

for such more questions on reaction

https://brainly.com/question/24795637

#SPJ8

Now, consider a situation in which the concentrations of CO, H2, and CH3OH are all 2.1 M . Which statement best describes what will occur?
Now, consider a situation in which the concentrations of , , and are all 2.1 . Which statement best describes what will occur?
A. The reverse reaction will be favored until equilibrium is reached.
B. The forward reaction will be favored until equilibrium is reached.
C. The reaction is at equilibrium, so the concentrations will not change.

Answers

In a situation where the concentrations of CO, H₂, and CH₃OH are all 2.1 M, the best description of what will occur is that (C) the reaction is at equilibrium, and the concentrations will not change.

Equilibrium in a chemical reaction occurs when the forward and reverse reactions proceed at equal rates. At this point, the concentrations of the reactants and products remain constant, as there is no net change in their concentrations over time.

In this case, since the concentrations of CO, H₂, and CH₃OH are already equal, there is no driving force for the reaction to shift in either direction.

Therefore, (C) the reaction will continue to exist at equilibrium, and the concentrations of the species involved will remain unchanged unless there is a change in the reaction conditions.

To know more about the Equilibrium refer here :

https://brainly.com/question/14511376#

#SPJ11

For each of the following strong base solutions, determine [OH−][OH−] and [H3O+][H3O+] and pHpH and pOHpOH.

For 5.2×10−45.2×10−4 MM Ca(OH)2Ca(OH)2, determine [OH−][OH−] and [H3O+][H3O+].

Answers

Calculating reaction [OH-][OH-]:[Ca(OH)2] = 5.2 × 10−4 M No.  Therefore, [OH-][OH-] = 1.04 × 10−3 M.

OH- ions from one molecule of Ca(OH)2 = 2Moles of OH- ions from [Ca(OH)2] = 2 × [Ca(OH)2] = 2 × 5.2 × 10−4M = 1.04 × 10−3 M Therefore, [OH-][OH-] = 1.04 × 10−3 M. Calculating [H3O+][H3O+]:As we know that water is neutral and the product of [H3O+] and [OH-] is equal to 10^-14[H3O+][OH−] = 1.0 × 10−14 pOH = −log[OH−][OH−] = antilog (−pOH)pH = 14.00 − pOHpOH = −log[OH−][OH−].

Substituting values, we get:[OH-][OH-] = 1.04 × 10−3 M[H3O+] = 1.0 × 10−14/[OH-] = 1.0 × 10^-14/1.04 × 10−3 = 9.615 × 10^-12 M(pH) = 14.00 - pOH = 14.00 - 11.02 = 2.98(pOH) = -log[OH−][OH−] = -log(1.04 × 10^-3) = 2.98Therefore, the values of [OH-], [H3O+], pH, and pOH are 1.04 × 10^-3 M, 9.615 × 10^-12 M, 2.98 and 11.02 respectively.

To know more about reaction visit:

https://brainly.com/question/30464598

#SPJ11

vinegar is a solution of acetic acid in water. if a 185 ml bottle of distilled vinegar contains 19.1 ml of acetic acid, what is the volume percent (v/v) of the solution?

Answers

The volume percent (v/v) of the vinegar solution with acetic acid comes out to be approximately 10.32%.

To calculate the volume percent (v/v) of the solution, we need to determine the ratio of the volume of the solute (acetic acid) to the volume of the solution (vinegar), and then express it as a percentage.

Volume percent (v/v) = (Volume of solute / Volume of solution) * 100

In this case, the volume of acetic acid is given as 19.1 ml, and the volume of the solution (vinegar) is 185 ml.

Volume percent (v/v) = (19.1 ml / 185 ml) * 100

                    = 0.1032 * 100

                    = 10.32%

Therefore, the volume percent (v/v) of the solution is approximately 10.32%.

To read more about solution, visit:

https://brainly.com/question/25326161

#SPJ11

chromatography of food dyes lab why is it important to mark the solvent level on the chromatography paper as soon as you remove it from the petri dish

Answers

It is important to mark the solvent level on the chromatography paper as soon as you remove it from the petri dish in a chromatography of food dyes lab because if the solvent level is not marked as soon as possible, the solvent front can evaporate causing the results to be inaccurate.

Chromatography is a laboratory technique for separating a mixture into its individual components. The mixture is dissolved in a solvent and then placed in contact with a stationary phase. The components of the mixture are then separated based on their individual interactions with the stationary phase and the solvent. Chromatography of food dyes is a lab that is used to separate different food dyes that are present in a sample.

The sample is placed on chromatography paper which is then placed in a petri dish containing a solvent. As the solvent moves up the chromatography paper, the different dyes in the sample are separated based on their individual interactions with the paper and the solvent.

In a chromatography of food dyes lab, it is important to mark the solvent level on the chromatography paper as soon as it is removed from the petri dish because the solvent front can evaporate causing the results to be inaccurate. If the solvent front evaporates, the distance traveled by the different dyes will be shorter, making it appear as though they are less separated than they actually are.

By marking the solvent level as soon as possible, the distance traveled by the different dyes can be accurately measured, and the results will be more accurate.

You can learn more about chromatography at: brainly.com/question/11960023

#SPJ11

The reason why it is important to mark the solvent level on the chromatography paper as soon as you remove it from the petri dish is that the solvent level must be measured to calculate the Rf value. The Rf value is a way to quantify how far a particular compound travels in chromatography.

It is calculated as the distance traveled by the compound divided by the distance traveled by the solvent.The chromatography of food dyes lab is a experiment that aims to identify the dyes used in food products by using paper chromatography. The procedure includes: Cut a strip of chromatography paper and mark the solvent level using a pencil as soon as you remove it from the petri dish; prepare the chromatography solvent by mixing rubbing alcohol with water; then, spot the dyes on the chromatography paper using toothpicks or capillary tubes.

Afterwards, place the paper in the petri dish containing the solvent, making sure that the dyes do not touch the solvent, and cover it. Allow the solvent to travel up the paper until it reaches the solvent level mark. Once the solvent level has reached the mark, remove the paper from the petri dish and allow it to dry before analyzing the results.

To know more about chromatography visit:

https://brainly.com/question/11960023

#SPJ11

an atom of which of the following elements has the highest electronegativity? a)k b)as c)ba d)si e)br

Answers

The atom of Bromine (Br) has the highest electronegativity. This means option (e) is correct.

Electronegativity is the power of an atom to attract the shared pair of electrons towards it in a covalent bond. The electronegativity of the elements increases from left to right across the period of the periodic table. As we move from left to right across the period of the periodic table, the nuclear charge increases and the atomic radius decreases, resulting in a higher effective nuclear charge acting on the valence electrons, making them more strongly attracted to the nucleus.

The electronegativity of the elements decreases as we move down the group of the periodic table. This is due to the fact that, as we move down the group, the number of shells in the element increases, shielding the valence electrons from the nucleus' attractive force, resulting in a weaker effective nuclear charge acting on the valence electrons.

To know more about electronegativity visit:

https://brainly.com/question/29597673

#SPJ11

Other Questions
what amount should swifty report as inventories in its balance sheet? Sadie and Evan are building a block tower. All the blocks have the same dimensions. Sadies tower is 4 blocks high and Evan's tower is 3 blocks high. Suppose that X ~ N(-4,1), Y ~ Exp(10), and Z~ Poisson (2) are independent. Compute B[ex-2Y+Z]. what is the best definition of relativistic thought according to perry question 1 Suppose A is an n x n matrix and I is the n x n identity matrix. Which of the below is/are not true? A. The zero matrix A may have a nonzero eigenvalue. If a scalar A is an eigenvalue of an invertible matrix A, then 1/ is an eigenvalue of A. D. c. A is an eigenvalue of A if and only if is an eigenvalue of AT. If A is a matrix whose entries in each column sum to the same numbers, thens is an eigenvalue of A. E A is an eigenvalue of A if and only if is a root of the characteristic equation det(A-X) = 0. F The multiplicity of an eigenvalue A is the number of times the linear factor corresponding to A appears in the characteristic polynomial det(A-AI). An n x n matrix A may have more than n complex eigenvalues if we count each eigenvalue as many times as its multiplicity. Unit 7 lessen 12 cool down 12. 5 octagonal box a box is shaped like an octagonal prism here is what the basee of the prism looks like for each question, make sure to include the unit with your answers and explain or show your reasoning it may be the direction things are headed anyway, he says. "I don't think it's just manage- ment practices that are getting soft."Questions 1. What are some of the potential advantages of providing employees with 2. 3. relatively positive performance appraisals and feedback? What are some of the potential disadvantages of providing employees with positive performance appraisals and feedback?What are some of potential advantages of providing employees with negative feedback? What are some of the potential disadvantages of providing employees with negative feedback? Source: Rachel Feintzelg. "You're Awesome! Firms Scrap Negative Feedback, The Wall Street Journal, February 11, 2015, B1, B5, 4. Question 1 1 pts True or False The distribution of scores of 300 students on an easy test is expected to be skewed to the left. True False 1 pts Question 2 The distribution of scores on a nationally a n simple linear regression, r 2 is the _____.a.coefficient of determinationb.coefficient of correlationc.estimated regression equationd.sum of the squared residuals Explain why the pursuit of abalanced-budget (or deficit target) duringa recession may worsen therecession? Imagine that you have recently started a new role as Marketing Manager for a leading brand of healthy snacks. You are asked to investigate the potential consumer segment for a new brand of healthy snacks. Write a sample questionnaire including two demographic questions, two AIO questions, and two behavioral questions. which of the following statements about miscible liquids is correct? i. the components form a homogeneous solution. ii. the partial pressure of each component is the vapor pressure of the mixture times the components mole fraction. iii. each component has its own vapor pressure. Freda's Florist reported the following before-tax income statement items for the year ended December 31, 2021: Operating income $ 263,000 Income on discontinued operations 58,000 All income statement items are subject to a 25% income tax rate. In its 2021 income statement, Freda's separately stated income tax expense and total income tax expense would be: Explain why Acemoglu and Robinson (2012) identify in the critical juncture of the expansion of trade in the Atlantic a crucial moment for the development of inclusive institutions in Britain, and why inclusive institutions were determinant for the Industrial Revolution in Britain. Cite all sources and use critical analysis Publishing a policy and standards library depends on the communications tools available within an organization. Some organizations keep documents in Word format and publish them in PDF format. Other organizations use Governance, Risk, and Compliance (GRC), a class of software for supporting policy management and publication. In addition to authoring documents, GRC software typically includes a comprehensive set of features and functionality, such as assessing the proper technical and nontechnical operation of controls, and mitigating/remediating areas where controls are lacking or not operating properly (governance). Answer the following question(s): Why might an organization use the Word and PDF approach rather than GRC software, and vice versa? Explain in 100 - 200 words, a caveat of using statistical significance in data science. If the following times are estimated for an activity of the project, calculate the mean and the variance using PERT analysis.a = 5b = 13m = 9 rank the following oil spills from highest to lowest in terms of oil tonnage spilled. what is the mole ratio of ammonia (with a pkb of 4.75) to ammonium chloride in a buffer with a ph of 9.03 ? please respond quickly(a) Explain in your own words what is meant by active and passive sensors. Give an example of each type of sensor. [4 marks] (b) A thermometer is regarded as a first-order instrument where a time dela