Unpolarized light with intensity 370 W/m2 passes first through a polarizing filter with its axis vertical, then through a second polarizing filter. It emerges from the second filter with intensity 132 W/m2 . You may want to review (Pages 897 - 898) . Part A What is the angle from vertical of the axis of the second polarizing filter
Answer:
θ = 32.4º
Explanation:
For this exercise let's use Malus's law
I = Io cos² θ
in this case it indicates that the incident intensity is 370 W/m², when the first polarization passes, only the radiation with the same polarization of the polarizer emerges, that is, vertical
I₀ = 370/2 = 185 W / m²
this is the radiation that affects the second polarizer, let's apply the expression of Maluz
θ = cos⁻¹ ([tex]\sqrt{\frac{I}{I_o} }[/tex])
θ = cos⁻¹ ([tex]\sqrt{132/185}[/tex])
θ = cos⁻¹ (0.844697)
θ = 32.4º
A 0.5kg ball of clay originally moving at 6 m/s strikes a wall and comes to rest in 0.25s, what is the magnitude of the impulse given to the ball of clay?
A) 0.75 kg m/s
B) 1.5 kg m/s
C) 3.0 kg m/s
D) 12 kg m/s
Answer:
C I did USA testprep
Explanation:
how can we know that atmosphere exert pressure explain with figure
Imagine you are on a space mission and you are 6 AU's from the Sun and you use a light sensor to measure the brightness of the Sun. The amount of sunlight received per square centimeter would be different by what factor compared to the same measurement on Earth at AU
Answer:
36 times less.
Explanation:
The distance from you to the sun is 6AU's, and from the sun to the earth is 1 AU.
Therefore,
At Earth sunlight received per unit cm² is:
[tex]I_{earth} = \dfrac{I_o}{4 \pi \times (1)^2}[/tex]
[tex]I_{earth} = \dfrac{I_o}{4 \pi}[/tex]
[tex]I_{me} =\dfrac{I}{4 \pi (6)^2}[/tex]
[tex]I_{me} = \dfrac{I_o}{36(4 \pi)}[/tex]
Thus, [tex]I_{earth} = 36 \times I_{me}[/tex]
Thus, the right answer is 36 times less.
If acceleration is zero what statement about velocity is
true *
A)Velocity is zero
B)Velocity is constant
C)Velocity cannot be determined
D) Velocity is changing
Answer: A
Velocity is zero because the acceleration isn't affected, and velocity is the rate of change, so it can't be any other options.
Answer:
B)Velocity is constantExplanation:
If an object moves with a velocity and there is no acceleration, then the velocity remains constant. His velocity after five second will be equal to his initial velocity.#keeplearning dude:)What is the period of a wave with a speed of 20.0 m/s and a frequency of 10.0 Hz?
im confused hold on imma send you a link to the answerExplanation:
How much heat is needed to warm 365 mL of water in a baby bottle from 240C to 38C
Answer:98.6 degrees Fahrenheit
Explanation:
Can you please help me ?
Answer:
Distance is 300 and displacement is 100
Explanation:
Distance= 100+100+100=300
Displacement=100
plz mark me as brainliest.
A cold block of metal feels colder than a block of wood at the same temperature. Why? A hot block of metal feels hotter than a block of wood at the same temperature. Again, why? Is there any temperature at which the two blocks feel equally hot or cold? What temperature is this?
: In general, metals feel colder or hotter to the touch than other materials at the same temperature because they're good thermal conductors. This means they easily transfer heat to colder objects or absorb heat from warmer objects
It is because the metal conducted heat faster than it feels colder than the wood, which conducted heat slower. Even tho they are similar temperatures. The metal will feel colder than the wood because of the thermal conductivity of the metal, compared to the wood.
What is not the ideal location for a radioactive waste storage facility?
A.
in an area that already has a lot of background radiation
B.
in an area that has few earthquakes
C.
far away from ground water
D.
in an area that is unpopulated with people
Answer:
D
Explanation:
9. Mr. Smith went skiing in Maine last weekend. He traveled 523 kilometers to Sugarloaf from
Leominster. His average speed was 109 km/hr. How long did it take Mr. Smith to hit the slopes?
Answer:
Time taken by Mr. smith = 4.80 hour (Approx.)
Explanation:
Given:
Distance travel by Mr. smith = 523 kilometer
Average speed of Mr. smith = 109 km/hr
Find;
Time taken by Mr. smith
Computation:
Time taken = Distance cover / Speed
Time taken by Mr. smith = Distance travel by Mr. smith / Average speed of Mr.
smith
Time taken by Mr. smith = 523 / 109
Time taken by Mr. smith = 4.798 hr
Time taken by Mr. smith = 4.80 hour (Approx.)
The first extra-solar planet around a main sequence star (i.e., not a neutron star or white dwarf) was found around the star 51 Pegasi in 1995. The large planet causes a measureable motion of the star around the center of mass of the system. Pegasi 51's orbital motion had a period of 4 days indicating a very large planet very close to the star. A large planet of mass M around a small star of mass 4M. The distance between planet and star is L. Both the planet and star will orbit around the center of mass of the system (marked by the red X).
Required:
Where is the center of mass of the star-planet system?
Answer:
[tex]r_{cm}[/tex]= 1/5 L
Explanation:
To find the center of mass of the system let's use
[tex]r_{cm} = \frac{1}{M}[/tex] ∑ r_i x_i
where m is the total mass of the system
let's apply this expression to our case
Let's set the reference frame on the star
[tex]r_{cm} = \frac{1}{M +4M} ( 4M 0 + M L)[/tex]
r_{cm} = [tex]\frac{1}{5}[/tex] L
[tex]r_{cm}[/tex]= 1/5 L
Hey, the breast center is 1/5 of the distance between the star and the planet.
The density of 1 kilogram of gold is
Answer:
0.02 kg/cm³
Explanation:
If you weigh 690 N on the earth, what would be your weight on the surface of a neutron star that has the same mass as our sun and a diameter of 15.0 km ? Take the mass of the sun to be ms = 1.99×1030 kg , the gravitational constant to be G = 6.67×10−11 N⋅m2/kg2 , and the free-fall acceleration at the earth's surface to be g = 9.8 m/s2 . Express your weight wstar in newtons.
Answer:
W' = 1.66 x 10¹⁴ N
Explanation:
First, we will calculate the mass:
[tex]W = mg[/tex]
where,
W = weight on earth = 690 N
m = mass = ?
g = acceleration due to gravity on earth = 9.8 m/s²
Therefore,
[tex]m = \frac{W}{g} = \frac{690\ N}{9.8\ m/s^2}\\\\m = 70.4\ kg[/tex]
Now, we will calculate the value of g on the neutron star:
[tex]g' = \frac{GM}{R^2}[/tex]
where,
g' = acceleration due to gravity on the surface of the neutron star = ?
G = Gravitational Constant = 6.67 x 10⁻¹¹ N.m²/kg²
M = Mass of the Neutron Star = 1.99 x 10³⁰ kg
R = Radius of the Neutron Star = 15 km/2 = 7.5 km = 7500 m
Therefore,
[tex]g' = \frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(1.99\ x\ 10^{30}\ kg)}{(7500\ m)^2}\\\\g' = 2.36\ x\ 10^{12}\ m/s^2[/tex]
Therefore, the weight on the surface of the neutron star will be:
[tex]W' = mg'\\W' = (70.4\ kg)(2.36\ x\ 10^{12}\ m/s^2)[/tex]
W' = 1.66 x 10¹⁴ N
The fictional rocket ship Adventure is measured to be 65 m long by the ship's captain inside the rocket.When the rocket moves past a space dock at 0.5c. As rocket ship Adventure passes by the space dock, the ship's captain flashes a flashlight at 1.20-s intervals as measured by space-dock personnel.
Required:
How often does the flashlight flash relative to the captain?
Answer:
1.04 s
Explanation:
The computation is shown below:
As we know that
t = t' × 1 ÷ (√(1 - (v/c)^2)
here
v = 0.5c
t = 1.20 -s
So,
1.20 = t' × 1 ÷ (√(1 - (0.5/c)^2)
1.20 = t' × 1 ÷ (√(1 - (0.5)^2)
1.20 = t' ÷ √0.75
1.20 = t' ÷ 0.866
t' = 0.866 × 1.20
= 1.04 s
The above formula should be applied
Determine the poles of the magnet. Look at the three compass readings that are on top of the magnet. Label the
end the compass points away from as "S" (south), and the other end that the compass points toward as "N" (north).
Record these poles in Figure 1.
Continue
Intro
Answer:
the red pointer on the magnet ( grey region) : points towards north
red pointer outside the magnet ( white region) is pointing towards south
Explanation:
please see the attached image
What type of force is F-?
Answer:
Frictional Force
Explanation:
i think so
6. If an object accelerates at 3m/s/s, how long does it take for the object to travel at a speed of 12 m/s.
Answer:
4 seconds
Explanation:
Assuming that the object started from rest,
v = at
--> t = v/a = (12 m/s) / (3 m/s^2)
= 4 seconds
Why does Marx’s workers’ paradise resolve the problems of capitalism?
A. Everything is free, and no one has to work.
B. Workers are divided into three classes, much like in Plato’s ideas.
C. There is no currency in the paradise so no economic problems.
D. People work for their own good instead of a factory owner’s.
Two risks of exposure to High levels of UV radiation
Answer:
uv radiation cause cancer
uv radiation effect our eyes
Answer:
you can get
1:skin cancer
2:eye damage
3:skin damage
4:immune system suppression
choose which two u want
hope this helped
:)
Explanation:
g 1. Water flows through a 30.0 cm diameter water pipe at a speed of 3.00 m/s. All of the water in the pipe flows into a smaller pipe that is 10.0 cm in diameter. Determine: a) The speed of the water flowing through the 10.0 cm diameter pipe. b) The mass of water that flows through the larger pipe in 1.00 minute. c) The mass of water that flows through the smaller pipe in 1.00 minute.
Answer:
a) v₂ = 30 m/s
b) m₁ = 12600 kg
c) m₂ = 12600 kg
Explanation:
a)
Using the continuity equation:
[tex]A_1v_1 = A_2v_2[/tex]
where,
A₁ = Area of inlet = π(0.15 m)² = 0.07 m²
A₂ = Area of outlet = π(0.05 m)² = 0.007 m²
v₁ = speed at inlet = 3 m/s
v₂ = speed at outlet = ?
Therefore,
[tex](0.07\ m^2)(3\ m/s)=(0.007\ m^2)v_2\\\\v_2 = \frac{0.21\ m^3/s}{0.007\ m^2}[/tex]
v₂ = 30 m/s
b)
[tex]m_1 = \rho A_1v_1t[/tex]
where,
m₁ = mass of water flowing in = ?
ρ = density of water = 1000 kg/m³
t = time = 1 min = 60 s
Therefore,
[tex]m_1 = (1000\ kg/m^3)(0.07\ m^2)(3\ m/s)(60\ s)\\[/tex]
m₁ = 12600 kg
c)
[tex]m_1 = \rho A_1v_1t[/tex]
where,
m₂ = mass of water flowing out = ?
ρ = density of water = 1000 kg/m³
t = time = 1 min = 60 s
Therefore,
[tex]m_2 = (1000\ kg/m^3)(0.007\ m^2)(30\ m/s)(60\ s)\\[/tex]
m₂ = 12600 kg
If a runner is running at 100 meters per minute at the exact moment they cross the finish line of a race, it is the
instantaneous speed.
O True
O False
Answer:
Hello! Your answer would be, O False
Explanation:
Hope I helped! Brainiest plz!♥ Have a nice morning! Hope you make a 100%! -Abby
Answer:
False is the correct answer.
Explanation:
plz mark me as brainliest.
PLZ help 10 points!!! space question!
Answer:
B. They are smaller and made of rocky material
Explanation:
i think it's right??
0)
A-B-C-D-E
Describe the mass of the reactants and products given the balanced chemical reaction
A)
The mass of the products is 2/3 that of the reactants.
B)
The mass of the reactants equals the mass of the products.
C)
The mass of the reactants is less than the mass of the products.
D)
The mass of the reactants is greater than the mass of the products.
Answer:
D)
The mass of the reactants is greater than the mass of the products.
A block of weight 1200N is on an incline plane of 30° with the horizontal, a force P is applied to the body parallel to the plane, if the coefficient of the static friction is 0.20 and kinetic friction is 0.15 (1) find the value of P to cause motion up the plane (2) find P to prevent motion down the plane. (3) Find P to cause continuous motion up the plane.
Answer:
a) P = 807.85 N, b) P = 392.15 N, c) P = 444.12 N
Explanation:
For this exercise, let's use Newton's second law, let's set a reference frame with the x-axis parallel to the plane and the direction rising as positive, and the y-axis perpendicular to the plane.
Let's use trigonometry to break down the weight
sin θ = Wₓ / W
cos θ = W_y / W
Wₓ = W sin θ
W_y = W cos θ
Wₓ = 1200 sin 30 = 600 N
W_y = 1200 cos 30 = 1039.23 N
Y axis
N- W_y = 0
N = W_y = 1039.23 N
Remember that the friction force always opposes the movement
a) in this case, the system will begin to move upwards, which is why friction is static
P -Wₓ -fr = 0
P = Wₓ + fr
as the system is moving the friction coefficient is dynamic
fr = μ N
fr = 0.20 1039.23
fr = 207.85 N
we substitute
P = 600+ 207.85
P = 807.85 N
b) to avoid downward movement implies that the system is stopped, therefore the friction coefficient is static
P + fr -Wx = 0
fr = μ N
fr = 0.20 1039.23
fr = 207.85 N
we substitute
P = Wₓ -fr
P = 600 - 207,846
P = 392.15 N
c) as the movement is continuous, the friction coefficient is dynamic
P - Wₓ + fr = 0
P = Wₓ - fr
fr = 0.15 1039.23
fr = 155.88 N
P = 600 - 155.88
P = 444.12 N
two bodies of masses 10 kg and 4 kg are moving in opposite direction with the same velocity of 5 m per second if they Collide and stick together after the impact calculate their velocities
Answer:
dasd
Explanation:
dsdas
what is force,momentum,and velocity.
Answer:
A force is a push or pull upon an object resulting from the object's interaction with another object.
Momentum is force or speed of movement.
Velocity defines the path of the motion of the frame or the object
An object’s
✔ mass
will remain constant throughout the universe, but its
can change from planet to planet.
If you increase the mass of a planet, what happens to its gravity?
If the gravity on a planet decreases, what happens to the weight of an object on that planet?
Answer:
mass, weight, strength of gravity increases, weight decreases
Explanation:
got it on edge
Answer:
An object’s
✔ mass
will remain constant throughout the universe, but its
✔ weight
can change from planet to planet.
If you increase the mass of a planet, what happens to its gravity?
✔ strength of gravity increases
If the gravity on a planet decreases, what happens to the weight of an object on that planet?
✔ weight decreases
Explanation:
right on edge 22
A sound wave travels with a velocity of 1.5 m/s and has a frequency of 500 Hz. What is its wavelength?
Why would the kinetic energy at the bottom of the track be less than the potential energy at the top of the track?
Answer:
This is because of friction and heat lost.
Explanation:
