I have some true or false questions I need help with. 9th grade.**

Handware can be tracked back to ancient times. Over six centuries ago.
True or false.

Hardware is only found in computers.
True or false. I know

Instruments and weaving looms where some of the first pieces of hardware.
True or false.

Computers and hardware is the same thing
True or false.

Answer:

Hardware can be traced back to ancient times. False

Hardware is only found in computers. False

Instruments and weaving looms were some of the first pieces of hardware. False

Computers and hardware is the same thing. This question is a bit broad but there's many different types of hardware. From keyboards to printers to speakers.

I tried my best not exactly sure though.

What is the hamming distance between the following bits? Sent
bits: 101100111, Received bits: 100111001
Select one: 5. Or 3 or 6 or4​

script code written in many languages of the best known: ( C#_PHP_HTML)​

Factory Design Pattern Assignment This assignment will give you practice in using the Factory/Abstract Factory Design Pattern. You are going to create a Terraforming program. What does terraform mean

Page Setup options are important for printing a PowerPoint presentation a certain way. The button for the Page Setup dialog box is found in the
File tab.
Home tab.
Design tab.
Slide Show tab.

Write a MIPS assembly language program that prompts for a user to enter a series of floating point numbers and calls read_float to read in numbers and store them in an array only if the same number is not stored in the array yet. Then the program should display the array content on the console window.
Consult the green sheet and the chapter 3 for assembly instructions for floating point numbers. Here is one instruction that you might use:
c.eq.s $f2, $f4
bc1t Label1
Here if the value in the register $f2 is equals to the value in $f4, it jumps to the Label1. If it should jump when the value in the register $f2 is NOT equals to the value in $f4, then it should be:
c.eq.s $f2, $f4
bc1f Label1
To load a single precision floating point number (instead of lw for an integer), you might use:
l.s $f12, 0($t0)
To store a single precision floating point number (instead of sw for an integer), you might use:
s.s $f12, 0($t0)
To assign a constant floating point number (instead of li for an integer), you might use:
li.s $f12, 123.45
To copy a floating point number from one register to another (instead of move for an integer), you might use:
mov.s $f10, $f12
The following shows the syscall numbers needed for this assignment.
System Call System Call System Call
Number Operation Description
2 print_float $v0 = 2, $f12 = float number to be printed
4 print_string $v0 = 4, $a0 = address of beginning of ASCIIZ string
6 read_float $v0 = 6; user types a float number at keyboard; value is store in $f0
8 read_string $v0 = 8; user types string at keybd; addr of beginning of string is store in $a0; len in $a1
------------------------------------------
C program will ask a user to enter numbers and store them in an array
only if the same number is not in the array yet.
Then it prints out the result array content.
You need to write MIPS assembly code based on the following C code.
-------------------------------------------
void main( )
{
int arraysize = 10;
float array[arraysize];
int i, j, alreadyStored;
float num;
i = 0;
while (i < arraysize)
{
printf("Enter a number:\n");
//read an integer from a user input and store it in num1
scanf("%f", &num);
//check if the number is already stored in the array
alreadyStored = 0;
for (j = 0; j < i; j++)
{
if (array[j] == num)
{
alreadyStored = 1;
}
}
//Only if the same number is not in the array yet
if (alreadyStored == 0)
{
array[i] = num;
i++;
}
}
printf("The array contains the following:\n");
i = 0;
while (i < arraysize)
{
printf("%f\n", array[i]);
i++;
}
return;
}
Here are sample outputs (user input is in bold): -- note that you might get some rounding errors
Enter a number:
3
Enter a number:
54.4
Enter a number:
2
Enter a number:
5
Enter a number:
2
Enter a number:
-4
Enter a number:
5
Enter a number:
76
Enter a number:
-23
Enter a number:
43.53
Enter a number:
-43.53
Enter a number:
43.53
Enter a number:
65.43
The array contains the following:
3.00000000
54.40000153
2.00000000
5.00000000
-4.00000000
76.00000000
-23.00000000
43.52999878
-43.52999878
65.43000031

There used to be a popular type of pulp book for younger readers. They were called "Choose Your Own Adventure" novels. The idea was pretty simple. You'd start reading and then a few pages into the book, there would be a plot development that required a choice. The book might describe that you've entered a spooky house and the door has locked behind you. It would then ask you if you want to try to exit by going through the kitchen or exploring upstairs. If you chose to go into the kitchen, you'd turn to page 200, if you chose to go upstairs, you'd turn to page 43. This would repeat maybe five or six times though the book. You could re-read it a few times and try different outcomes.
In this lab you are going to create a choose your own adventure application using navigation controllers. The introduction screen to your application will contain a few lines of text to set up a story and then leave the user with a choice. Below the text, you will present two buttons that correspond to the different choices.
For example, you might see the following text on the main screen:
You are walking down the street when a tiger runs up and takes your lunch and then runs away...
Do you want to chase the tiger or run away?
Chase
Run Away
The user must then tap one of the buttons. This will move the user to a new screen with a few more lines of the story and another choice and two more buttons. You will create three (3) turning points in your story. This means that your story will have eight (8) different possible outcomes and a total of 15 screens.
Requirements
The story must ask three (3) questions, no matter how the user answers the previous question. All the questions must be different and result in a different story text.
The story must have eight (8) possible different final outcomes.
The story must include a minimum of 15 screens in total.
Create content that is appropriate and not-offensive. We will share these and play them together.
For extra credit you can add an extra screen and use inputs to capture data from the user such as a name, favorite food, or lucky number and use this data in the story.

You have been given an encrypted copy of the Final exam study guide here, but how do you decrypt and read it???

Along with the encrypted copy, some mysterious person has also given you the following documents:

helloworld.txt -- Maybe this file decrypts to say "Hello world!". Hmmm.

hints.txt -- Seems important.

In a file called pa11.py write a method called decode(inputfile,outputfile). Decode should take two parameters - both of which are strings. The first should be the name of an encoded file (either helloworld.txt or superdupertopsecretstudyguide.txt or yet another file that I might use to test your code). The second should be the name of a file that you will use as an output file. For example:

decode("superDuperTopSecretStudyGuide.txt" , "translatedguide.txt")

Your method should read in the contents of the inputfile and, using the scheme described in the hints.txt file above, decode the hidden message, writing to the outputfile as it goes (or all at once when it is done depending on what you decide to use).

Hint: The penny math lecture is here.

Another hint: Don't forget about while loops...

17. What are the basic modes of operation of 8255?Write the features of mode 0 in 8255?

You want a cable that could be used as a bus segment for your office network. The cable should also be able to support up to 100 devices. Which cable should you use?

A.
RG-6
B.
RG-8
C.
RG-58U
D.
RG-59

List the types of infrared we have

What’s unique about windows 8 compared to earlier windows

what is the best plugin for subscription sites?

is used for finding out about objects, properties and methods​

Which of the following protocols help IP in multicast service?
Select one:

ORARP
O CMP
O ARP
O IGMP​

which shortcut can we use to make directional heading of a cuboid more obvious while in the lidar view​

write the C program
The function turn_to_letter decides on the letter grade of the student according to the table below from the visa and final grades sent into it and returns it, write it together with a main function which the turn_to_letter function is called and prints the letter equivalent on the screen. -Success score = 40% of midterm + 60% of final,
-F for the success score below 50, D for between 50 and 59, C for between 60 and 69, B for between 70 and 79, A for 80 and above.

short note about micro miniaturzation​

what does this mean on a tamagotchi lol (this is the hello kitty one)

3.4 code practice question 2 edhesive

Which work habits should you follow to increase work efficiency and avoid health issues?

Fill in the blanks using A to J below.

1. ----- = command driven

2. ----- = general purpose

3. ----- = custom written

4. ----- = icon

5. ----- = menu driven

6. ----- = integrated software

7. ----- = desktop

8. ----- = system software

9. ----- = Window

10. ----- = software house

A. Software written to meet the specific needs of a company.

B. Related specialized programs combined in a unified package.

C. This software can be adapted for specific needs but is not written for any specific business purpose.

D. This interface requires the user to type in codes or words.

E. A pictorial representation of a file, folder, program, task or procedure.

F. This interface allows you to move a mouse or cursor to make a selection.

G. A rectangle that displays information on the screen.

H. A visual background over which all your work is done.

I. This software notifies the computer to begin sending data to the appropriate program to get a document printed.

J. A company that specializes in writing software.

who would benefit from using self-driving cars

Which of the following best explains how an analog audio signal is typically represented by a computer?
a. An analog audio signal is measured at regular intervals. Each measurement is stored as a sample, which is represented at the lowest level as a sequence of bits.
b. An analog audio signal is measured as a sequence of operations that describe how the sound can be reproduced. The operations are represented at the lowest level as programming instructions.
c. An analog audio signal is measured as input parameters to a program or procedure. The inputs are represented at the lowest level as a collection of variables.
d. An analog audio signal is measured as text that describes the attributes of the sound. The text is represented at the lowest level as a string.

a) Why is eavesdropping done in a network?
b) Solve the following using checksum and check the data at the
receiver:
01001101
00101000​

which two of the following are goals of the cognitive therapist

explain three main steps in mail merging (6 marks) ​

Design a Python3 function to compare every prefix of a string X to every element of string Y, if there is a match, place it in a python set, sort and reversely sort the set, and return the sorted and reversely sorted sets.

Python program
You are given the following text file called Mytext.txt. Write a Python function called search_file that accepts the name of the file (i.e. filename) and a string to look for in the file (i.e. mystring) as parameters. The function then looks for mystring in the file. Whenever it finds the string in a line, it saves the line number and the text for that line in a dictionary. Finally, it returns the dictionary after reading all the lines in the file and populating the dictionary with all matching line numbers and line text. If an empty string or a blank string is passed as mystring then an empty dictionary is returned.
Sample Input: search_file("Mytext.txt","python")
Sample Input: search_file("Mytext.txt","")
Contents of Mytext.txt
Python is an interpreted, high-level, programming language.
Python is dynamically typed and garbage-collected.
Python was conceived in the late 1980s.
Python 2.0, was released in 2000.
Python 3.0, was released in 2008.
The interpreters are available for many operating systems.

This program exercise #4 wants the user to write a program in python that contains a list of movies titles, years and movie rating. You will need to display a menu option that allows the user to list all of the movies, add a movie, delete a movie and exit out of the program. This will be done using lists and the functions to add an element to a list and how to delete an element to a list. The program should be written utilizing functions in python for the main function, the display_menu function, the delete function, the add function and the list movie function. You can place this all in one python file or include them in various python files that include them into the main program. Let me know if you have any questions with this exercise. Output Screen: COMMAND MENU list - List all movies add - Add a movie del - Delete a movie exit - Exit program Command List: list 1. Monty Python and the Holy Grail, 1979, R 2. On the Waterfront, 1954, PG 3. Cat on a Hot Tim Roof, 1958, R Command: add Name: Gone with the Wind Year: 1939 Rating: PG Gone with the Wind was added.

list the main industries in Sierra Leone​