Answers
Answer:
Explanation:
Alright, buckle up, since this isn't your average "the answer is C" explanation. Sorry beforehand for this upcoming essay. To make this easier, I'll give out the answers to start and then leave a "Why?" portion in case you want an in-depth explanation. I recommend getting the answers first since I can tell you're in a hurry, but if you get the chance look over a thing or two I said. Now:
To start, the 4 genotypes for the Dark Gray Rabbit are DD, Dd[tex]^{ch}[/tex], Dd[tex]^h[/tex], and Dd.
Why? Well, we know Dark Gray is dominant to all other alleles, so a Dark Gray allele with any other allele will produce a Dark Gray Rabbit.
The same concept above applies to the other rabbits:
The Chinchilla rabbit is d[tex]^{ch}[/tex]d[tex]^{ch}[/tex], d[tex]^{ch}[/tex]d[tex]^h[/tex], and d[tex]^{ch}[/tex]d.
The Himalayan rabbit is d[tex]^h[/tex]d[tex]^h[/tex] and d[tex]^h[/tex]d.
The Albino rabbit is dd.
Part 2:
Chinchilla Rabbit
Why? Because you have 2 Chinchilla alleles, and since they don't dominate and aren't dominated by any other allele, the rabbit will be a Chinchilla Rabbit.
Dark Gray Rabbit
Why? Same rule of dominance, and plus, it was one of the phenotypes listed in the first question.
For the table, look at the help image.
And finally, for the plan, the first set of rabbits with have a 50% chance of producing a dd[tex]^h[/tex] rabbit, which is a Himalayan rabbit. Then, breeding two of these will ALWAYS give you a Himalayan rabbit.
Why? Because the only alleles are d and d[tex]^h[/tex], and since d[tex]^h[/tex] is always dominant of d, there will never be a case where that rabbit is albino (thus always Himalayan)
Hope you got it all down, and glad I could be of any service.
Related Questions
For a population containing 90females and 10 males, what is the effective population size, ne ?.
Answers
This is equal to multiplying the total number of males by the total number of girls by four. Let's proceed, Kuwait's effective population size will be divided by 10 yesterday night by four times ten times ninety. This equals three, one, and the result will be merely six in the end.
What is meant by population size?The size of a population refers to the total number of members. The average person count per unit of area or volume is referred to as population density. The qualities of a species or its environment may have an impact on how individuals are spaced out in a population. The most accurate technique to gauge a population's size is to conduct a full count of its members. This method can be used to estimate the population sizes of trees or other comparably stationary species. Yet, counting every member of the organism would be challenging if it were mobile, like a fish.The density of people within a population's various size classes is referred to as population size-structure.To learn more about population size, refer to:
https://brainly.com/question/1502078
Microsporidia have been tentatively moved from the protists to the fungi based on which of the following?
Presence of chitin in cell walls
Absence of chloroplasts
Analysis of DNA sequence data
Absence of centrioles
Answers
Microsporidia have been tentatively moved from the protists to the fungi based on the presence of chitin in their cell walls.
What is chitin?
Chitin is a tough, protective polysaccharide that is found in the cell walls of fungi but not in protists. While the absence of chloroplasts and centrioles can also be used to distinguish fungi from protists, the presence of chitin in the cell walls is a more reliable and definitive characteristic for assigning organisms to the fungal kingdom. In addition to chitin, other features such as analysis of DNA sequence data and other biochemical markers have also supported the reclassification of Microsporidia as fungi.
What is protists?
Protists are a diverse group of eukaryotic organisms that are not plants, animals, or fungi. They are unicellular or multicellular, and can be found in a variety of habitats such as fresh water, marine environments, soil, and even inside other organisms as parasites. Protists include organisms such as algae, amoebas, ciliates, and slime molds.
Protists are characterized by their eukaryotic cell structure, which includes a nucleus and other membrane-bound organelles. They may have cell walls or lack them, and can reproduce sexually or asexually. Some protists are capable of photosynthesis, while others are heterotrophic and obtain nutrients by consuming other organisms or organic matter.
To know more about protists, visit:
https://brainly.com/question/1626285
#SPJ1
Anthropometric measurements does NOT include: Select one:
a. waist circumference
b. blood pressure
c. skinfold measures
d. capillary fragility
Answers
Anthropometric assessments are unable to detect protein and micronutrient shortages, modest changes in nutritional status, or small variations in the body fat-to-lean mass ratios.
What is meant by anthropometric measurements?Height, weight, head circumference, body mass index (BMI), waist, hip, and limb circumferences to measure adiposity, and skinfold thickness make up the basic components of anthropometry. The term "anthropometry" describes the measuring of a human being. An early physical anthropological technique, it has been applied in identification, the study of human physical variation, paleoanthropology, and other attempts to tie physical characteristics to racial and psychological features. Measurement of the human body is the subject of anthropometry. It is frequently used to assess a person's or population's nutritional status.Weight, height, the MUAC, the size of the head, and the skinfold are typical anthropometric measurements.To learn more about Anthropometric measurements, refer to:
https://brainly.com/question/28425092
A student asks about the mechanism that results in type II hypersensitivity reactions. What
description by the professor is best?
a. Antibodies coat mast cells by binding to receptors that signal its degranulation, followed by a discharge of preformed mediators.
b. Antibodies bind to soluble antigens that were released into body fluids, and the immune complexes are then deposited in the tissues.
c. Cytotoxic T lymphocytes or lymphokine-producing helper T 1 cells directly attack and destroy cellular targets.
d. Antibodies bind to the antigens on the cell surface
Answers
A student asks about the mechanism that results in type II hypersensitivity reactions. Antibodies bind to antigens on the cell surface best described by Prof. Here option D is the correct answer.
Type II hypersensitivity reactions occur when antibodies produced by the immune system bind to antigens on the surface of cells, leading to their destruction or damage. These antigens can be endogenous (i.e., self-antigens) or exogenous (i.e., foreign antigens). The antibodies involved in type II hypersensitivity reactions are usually IgG or IgM, and they can activate complement and recruit immune cells to the site of damage.
Examples of type II hypersensitivity reactions include autoimmune hemolytic anemia, in which antibodies bind to and destroy red blood cells, and Goodpasture's syndrome, in which antibodies bind to and damage the basement membrane of the kidneys and lungs.
The other options listed in the question describe mechanisms involved in other types of hypersensitivity reactions. Option (a) describes type I hypersensitivity reactions, in which antibodies coat mast cells and trigger the release of preformed mediators like histamine.
To learn more about hypersensitivity reactions
https://brainly.com/question/30509504
#SPJ4
A bacterial culture is growing exponentially. At 7:00 AM, the number of cells was estimated to be 5.5 X 104 cells. At 11:00 AM, the number of cells increased to 8.7 X 107 cells. What is the generation time in minutes of the bacteria? Please assume we are in the log phase of growth for this bacterial population. Please show your work.
Answers
N = N0 x 2^(t/g)
where:
N0 = initial number of cells
N = final number of cells
t = time elapsed
g = generation time
We can use the information given to solve for g.
At 7:00 AM, N0 = 5.5 x 10^4 cells
At 11:00 AM, N = 8.7 x 10^7 cells
The time elapsed is 4 hours, or 240 minutes.
Substituting these values into the formula, we get:
8.7 x 10^7 = 5.5 x 10^4 x 2^(240/g)
Dividing both sides by 5.5 x 10^4, we get:
1582.7 = 2^(240/g)
Taking the logarithm of both sides (base 2), we get:
log2(1582.7) = 240/g
Solving for g, we get:
g = 240 / log2(1582.7)
Using a calculator, we find that g is approximately 29.3 minutes. Therefore, the generation time of the bacteria is approximately 29.3 minutes.
In a population of 100 individuals, 16 exhibit a recessive trait. Find genotypic frequencies at homozygous (AA), heterozygous (Aa) and homozygous small a (aa).
Answers
The genotypic frequencies of homozygous dominant, heterozygous, and homozygous recessive are 36%, 48% and 16% respectively:
How do we calculate these genotypic frequencies for different traits?Assume:
AA for the homozygous dominant genotype
Aa for the heterozygous genotype
aa for the homozygous recessive genotype
Since there are 100 individuals in the population, and 16 of them exhibit the recessive trait. This means that the aa genotype frequency is 16/100 = 0.16.
Since there are only two possible alleles at this locus (A and a), the frequency of the A allele plus the frequency of the a allele must equal 1. We can use this fact and the frequency of the aa genotype to calculate the frequency of the A allele and the frequency of the Aa genotype:
frequency of aa genotype = q² = 0.16, where q is the frequency of the a allele
frequency of A allele = p = 1 - q
frequency of Aa genotype = 2pq, where p is the frequency of the A allele
Using these equations, we can solve for p and q:
q² = [tex]\sqrt{0.16}[/tex]
q = 0.16 = 0.4
p = 1 - q = 0.6
frequency of Aa genotype = 2pq = 2(0.6)(0.4) = 0.48
frequency of AA genotype = p² = (0.6)² = 0.36
Therefore, the genotypic frequencies are:
AA: 0.36 or 36%
Aa: 0.48 or 48%
aa: 0.16 or 16%
To find out more about traits, visit:
https://brainly.com/question/1463051
#SPJ1
what types of energy are in a battery-powered radio?
what types of energy are in a hydropower dam?
what types of energy are in using an unplugged iphone?
Answers
In a battery-powered radio, the energy is in the form of chemical potential energy stored in the battery, which is converted into electrical energy to power the radio's circuitry and speakers.
In a hydropower dam, the energy is in the form of kinetic energy of the moving water, which is converted into electrical energy by turbines that spin generators.
Using an unplugged iPhone does not involve any energy, as the phone is not in use and is not consuming or producing any form of energy.
What is energy?Energy is a fundamental property of matter and can exist in many forms, including kinetic energy (the energy of motion), potential energy (stored energy), thermal energy (the energy of heat), electrical energy (the energy of charged particles), electromagnetic energy (the energy of electromagnetic waves), and nuclear energy (the energy stored in the nuclei of atoms). Energy is essential for all physical processes and is conserved, meaning it can be neither created nor destroyed, only converted from one form to another.
Energy can be converted from one form to another. For example, in a hydropower dam, the energy is in the form of kinetic energy of the moving water, which is converted into electrical energy by turbines that spin generators.
Learn more about energy here https://brainly.com/question/2003548
#SPJ1
Which do you consider more convincing evidence, dna or physical features? Why?
Answers
Answer: dna
Explanation:dna is what creates your physical
Researchers studying the evolutionary relationships of three species of snails collected the data shown in Table 1.
Which of the following data sets is most likely to provide reliable information about the evolutionary relationships among these three snail species?
Location of fossils and shell orientation
Answers
Among the information needed to determine evolutive relationships between taxonomic groups, paleontological and morpholocal evidences are considered. Location of fossils and Shell orientation.
How to determine evolutive relationships between taxonomic groups?
Precise information must be recompiled to establish evolutive relationships between different taxonomic groups.
Evidence of different natures can be used to make these connections, for instance,
paleontological evidence, which provides information about the species distribution in different periods,morphological evidence, which refers to the shape and its function,genetic evidence, which is based on molecular comparisons.According to this framework, the data sets that most likely provide reliable information about the evolutionary relationships among these three snail species are
Location of fossils ⇒ paleontological evidenceShell orientation ⇒ morphological evidenceShell composition is not useful because the three species are composed of calcium carbonate.
DNA is not useful either because it is different for all of them.
You can learn more about evolutive relationship evidence at
https://brainly.com/question/19830690
#SPJ1
2. Draw on paper/computer and upload, graph the enzyme function with and without enzymes for the reaction:
A + B + energy transition state C + D
On the Y axis place Free Energy (increasing)
On the X axis place the Progress of reaction (reactants to poducts).
Answer the following questions and make the following additions to your graph.
Indicate the free energy of the reactants and the products (use horizontal lines).
Use letters a and b to indicate the energy of activation (EA) both with (a) and without (b) an enzyme. Are these values the same or different? Explain your answer choice.
Indicate the change in free energy (ΔG) of the reaction (use letter c). Is the reaction endergonic or exergonic? Explain your answer.
Answers
The free energy of the reactants and products would be indicated by horizontal lines on the graph. The reactants would be at a higher free energy level than the products, indicating that energy is released during the reaction.
What would the activation energy indicate?The activation energy (EA) both with and without an enzyme would be indicated by vertical lines labeled as "a" and "b," respectively. These lines would show that the activation energy is lower with an enzyme, indicating that the enzyme facilitates the reaction and reduces the energy required for the reaction to occur. The value of EA with an enzyme is lower than without an enzyme.
The change in free energy (ΔG) of the reaction would be indicated by a line labeled as "c" connecting the reactants to the products. The value of ΔG would be negative, indicating that the reaction is exergonic, meaning that energy is released during the reaction. The graph would show that the reaction is exergonic, with a lower activation energy in the presence of an enzyme compared to without an enzyme.
To know more about activation energy, visit:
https://brainly.com/question/30615986
#SPJ1
Read the following statement.
There are many different ways scales can be used to help people understand the natural world.
Which sentence from the article provides the BEST support for the above statement?
A
But how do you observe and measure something that is larger than an entire planet?
B
Cartographers, or people who make maps, create map scales to help people understand the relationship between distances on maps and distances in the real world.
C
Usually, the scales are in the bottom corner of a paper map.
D
Similar to how scale can help us understand very large objects, scale can also be used to help us understand very small objects
Answers
D. Similar to how scale can help us understand very large objects, scale can also be used to help us understand very small objects.
What is a scale ?In general, a scale is a tool or a system used to measure or compare things. Scales are used to quantify different attributes such as weight, length, time, temperature, and many others.
There are many types of scales that are used for different purposes, such as balance scales, digital scales, thermometers, rulers, and gauges. The choice of scale depends on the attribute being measured and the level of precision required.
Scales are used in many different fields, including science, engineering, medicine, and economics. They are essential for conducting experiments, manufacturing products, and analyzing data.
In the context of maps, a scale is used to show the relationship between the distances on the map and the actual distances in the real world. For example, a map with a scale of 1:50,000 means that one unit on the map represents 50,000 units in the real world.
To know more about Scale visit :
https://brainly.com/question/864161
#SPJ1
What is the answer to this question?
Answers
What is the main interaction between the respiratory and circulatory
systems?
A. They send hormones to each other.
B. They exchange oxygen and carbon dioxide.
C. They communicate through neuroendocrine cells.
D. They exchange information across synapses.
Answers
Answer:
they exchange oxygen and carbon dioxide
Explanation:
they don't do any of the rest
B. The exchange of oxygen and carbon dioxide.
Explanation:
The respiratory system is responsible for taking in oxygen from the air and expelling carbon dioxide, while the circulatory system is responsible for transporting oxygen-rich blood from the lungs to the rest of the body and bringing back carbon dioxide-rich blood to the lungs for removal. The exchange of oxygen and carbon dioxide occurs at the alveoli in the lungs, where the respiratory system interfaces with the circulatory system via the pulmonary capillaries. This exchange ensures that the body's cells have a constant supply of oxygen for cellular respiration and that carbon dioxide is efficiently removed from the body.
What is photosynthesis?
Answers
Answer:
Photosynthesis is a process used by plants, algae, and some bacteria to convert sunlight into chemical energy. This energy is stored in the form of sugars, which can then be used by the organism for growth and development. During photosynthesis, light energy is absorbed by chlorophyll molecules and converted into chemical energy, which is then used to produce sugars from carbon dioxide and water. Oxygen is also produced as a by-product of the reaction.
FILL IN THE BLANK.During hemorrhaging, the drop in capillary hydrostatic pressure will ________ NFP, thus ________ reabsorption.
Answers
During hemorrhaging, the drop in capillary hydrostatic pressure will Decrease, thus Increasing reabsorption.
As hydrostatic pressures drop, fluid from the interstitium returns to the capillary, driven by the oncotic pressure gradient, and edema is thought to be the outward filtration predominating the artery end of the capillary.
The fluid moves out of the capillaries when the interstitial fluid hydrostatic pressure decreases, leading to an increase in filtration rather than fluid reabsorption by the capillaries.
Learn more about hydrostatic
https://brainly.com/question/28206120
#SPJ4
An I'm important change during the adolescence province the beginning of a motorcycle to prepare the uterus receive and possible the fertilized egg this motorcycle school the menstrual cycle activity every blank days and I guess this from one of the blank and begins to travel down the blank blank the blank of innate the release of x 1 month the left blank releases an egg and the next month the right blank returns the release of an egg from ovary is referred to as blank during this Time the blanks with undergoing 10 days The walls of the blank feel with the blank and become thicker if the egg travels through the blank blank become fertilized by a blank blank then the eagle and plant itself in the lining of the blank and begin the process of development which can lead a new life if the egg is a blanket with break down and leave the body with the use blank and fishes that have collected in the blank with the blood and tissues leave the body through the blank of an average blank the period of time this is called blank
Answers
The filled gap passage is given below
An important change during adolescence is the onset of a menstrual cycle to prepare the uterus to receive and possibly nourish a fertilized egg. This cycle occurs every 28 days and is governed by the release of hormones from one of the ovaries, which begins to travel down the fallopian tube towards the uterus. The ovaries alternate each month, with the left ovary releasing an egg one month, and the right ovary the next. The release of an egg from the ovary is referred to as ovulation. During this time, the uterus undergoes 10 days of preparation. The walls of the uterus fill with blood and become thicker. If the egg travels through the fallopian tube and becomes fertilized by a sperm cell, then the zygote can implant itself in the lining of the uterus and begin the process of development, which can lead to a new life. If the egg is not fertilized, the lining of the uterus breaks down and leaves the body with the use of blood and tissues that have collected in the uterus. They leave the body through the va/g/ina. On average, the period of time this process takes is five days and is called menstruation.What is the adolescence stage about?During adolescence, girls undergo changes in their reproductive system that enable them to conceive and bear a child. One of the significant changes is the onset of a menstrual cycle, which is regulated by hormones released from the ovaries. The cycle prepares the uterus to receive and nourish a fertilized egg, which can develop into a baby if implanted in the uterine lining.
In summary, If the egg is not fertilized, the lining of the uterus breaks down and leaves the body through the vagina, which is known as menstruation. This process occurs every 28 days, on average, and is an essential part of the female reproductive system.
Read more about adolescence here:
https://brainly.com/question/14669277
#SPJ1
See complete text below
An important change during the adolescence province the beginning of a motorcycle to prepare the uterus receive and possible the fertilized egg this motorcycle school the menstrual cycle activity every blank days and I guess this from one of the -----and begins to travel down the---- ------- the -----of innate the release of x 1 month the left ----releases an egg and the next month the right ------returns the release of an egg from ovary is referred to as -----during this Time the ----with undergoing 10 days The walls of the ----feel with the ----and become thicker if the egg travels through the --- --- become fertilized by a --- --- then the eagle and plant itself in the lining of the ----- and begin the process of development which can lead a new life if the egg is a blanket with break down and leave the body with the use ----and fishes that have collected in the ----with the blood and tissues leave the body through the ----of an average ----the period of time this is called ---
ANSWERRRRRR PLSSSS ASAPP
Answers
Answer:
1) whole wheat
2) yeast
3) so the bread can rise
4) it makes it rise and expand by the particles vibrating (dont know if this is right)
5) nutrients
how do the nervous system and endocrine work together
Answers
The nervous system works by transmitting electrical signals (nerve impulses) through neurons to control and coordinate the body's responses to different stimuli. The endocrine system, on the other hand, uses hormones to regulate various physiological processes, such as growth and development, metabolism, and reproductive functions.
The hypothalamus and pituitary gland are two important structures in the brain that connect the nervous system and endocrine system. The hypothalamus produces hormones that regulate the secretion of hormones by the pituitary gland. The pituitary gland, in turn, secretes various hormones that regulate other endocrine glands in the body, such as the thyroid gland, adrenal gland, and gonads.
select all of the following that are able to pass freely through the phospholipid bilayer without the assistance of transport proteins.
Answers
All small, non-polar molecules that are able to pass freely through the phospholipid bilayer without the assistance of transport proteins are:
OxygenCarbon dioxideSteroid hormonesLarger molecules, polar molecules, and ions require transport proteins or channels to cross the phospholipid bilayer.
What is Steroid hormones?
Steroid hormones are a class of hormones that are derived from cholesterol and include testosterone, estrogen, and cortisol. They are small, non-polar molecules that can easily diffuse through the phospholipid bilayer of cell membranes and bind to intracellular receptors to modulate gene expression and cellular activity. Steroid hormones are involved in many physiological processes, including growth and development, reproduction, and stress response.
What are transport proteins?
Transport proteins are membrane proteins that facilitate the movement of molecules or ions across the cell membrane. They include channels, carriers, and pumps that selectively bind to and transport specific substances, such as glucose, amino acids, ions, and water, into or out of the cell. Transport proteins are essential for maintaining the proper balance of ions and molecules within the cell and for supporting many cellular processes, including nutrient uptake, waste removal, and cell signaling.
To know more about Steroid hormones, viist:
https://brainly.com/question/30332053
#SPJ1
discuss maternal pregnancy recognition in cattle and its role in maintenance of dairy cattle reproductive performance
Answers
An essential component of carrying a pregnancy to term is the mother's acknowledgment of her pregnancy. Without maternal recognition to continue the pregnancy, the early signals that limit luteolysis and encourage fetal implantation, growth, and uterine development run out with nothing to replace them, and the pregnancy is lost.
How successfully can cattle reproduce?To maintain a 365-day inter-calving gap, the seasonal calving system demands a high degree of reproductive activity. In the first three weeks of the seasonal breeding cycle, over 80% of cows are found to be in oestrus and inseminated, with a conception rate of 55% to 65% after this initial insemination.To maintain a 365-day inter-calving gap, the seasonal calving system demands a high degree of reproductive activity. In the first three weeks of the seasonal breeding cycle, over 80% of cows are found to be in oestrus and inseminated, with a conception rate of 55% to 65% after this initial insemination.To learn more about cattle reproduction, refer to:
https://brainly.com/question/16348373
Comparing tradable allowances and Pigouvian taxes:
When there are pollution externalities, a Pigouvian tax set equal to the external cost and a tradable allowance system where the number of allowances equals the efficient quantity are equivalent ways of achieving an efficient equilibrium. However, differences arise when there is uncertainty. The government may prefer one over the other depending on the information to which it has access.
An environmental study conducted in a given city suggests that if chemical plants emit more than 20 tons of chemicals each year, the water supply will become contaminated beyond the point where filtration techniques can make it safe for drinking. Given that the government has data on the total quantity to which it wants to reduce pollution but not on the firm's supply curve, it should use _ to achieve the efficient quantity.
a. A Pigouvian tax
b. Tradable allowances
Answers
Setting the proper tax rate for the pigouvian tax requires information of the firm's supply curve's shape. Without this knowledge, it may be difficult to determine the tax rate at the right level to reduce pollution to the target level.
Who or what is subject to a Pigouvian tax when it is imposed?A charge imposed on private individuals or companies for engaging in activities that have negative side effects for society is known as a "Pigouvian tax" (sometimes spelled "Pigouvian tax").
What does the Pigouvian tax serve?Pigouvian taxes are primarily used to counteract market inefficiencies by raising the marginal private cost by the amount of the negative externality. The total social cost of economic activity will be reflected in the final cost in this scenario.
To know more about pollution visit:-
https://brainly.com/question/28519286
#SPJ1
A list of some of the blood vessels of the systemic circuit is provided. Arrange them in order from highest to lowest blood pressure.
Highest blood pressure
.....
Lowest
Answers
The order from highest to lowest blood pressure is: Aorta, Arterioles, Capillaries, Venules, Veins.
The systemic circuit is a circuit in the circulatory system that consists of the heart and all body organs except the lungs. It carries oxygen and nutrient-rich blood to the body's organs and tissues, and carbon dioxide and other waste products away from them.
The circulatory system is made up of three main components: the heart, blood vessels, and blood. The heart pumps blood throughout the body via a network of arteries, veins, and capillaries.
The reason for this order depends on the blood pressure in the systemic circuit is related to the size, structure, and function of the different types of blood vessels. Therefore the correct order from highest to lowest blood pressure is: Aorta, Arterioles, Capillaries, Venules, Veins.
For such more question on blood pressure:
https://brainly.com/question/14661197
#SPJ11
FILL IN THE BLANK _________ is achieved when there is an equal concentration of water and electrolytes inside and outside the body's cells.
Answers
mark brainliest please
Everything about TB in Life Sciences form
Answers
The bacteria Mycobacterium tuberculosis is the one that causes tuberculosis (TB). Yet, TB bacteria can target any region of the body, including the kidney, spine, and brain. The bacteria typically assault the lungs. A TB bacteria infection does not always result in illness.
How can one contract Mycobacterium tuberculosis?The bacteria Mycobacterium tuberculosis is the one that causes tuberculosis (TB). Yet, TB bacteria can target any region of the body, including the kidney, spine, and brain. The bacteria typically assault the lungs. A TB bacteria infection does not always result in illness. Individuals can contract tuberculosis (TB) through airborne transmission. TB bacteria can spread by speech, singing, or coughing from a person who has TB disease of the lungs or throat. These germs could infect surrounding individuals through inhalation.People get tuberculosis (TB) from a bacteria called Mycobacterium tuberculosis (M. tuberculosis). TB is a disease that mostly affects the lungs, despite the fact that it can also affect other parts of the body.To learn more about Mycobacterium tuberculosis, refer to:
https://brainly.com/question/29995027
General Biology Laboratory Exercise
8. Plasmolysis of Plant Cells. Make a new Elodea wet mount (keep the previous Elodea
wet mount for comparison). Focus your slide at low power, gradually magnifying to
100x.
a. Along the edge of the coverslip, add a couple of drops of 5% NaCl while still
observing the slide. Watch as the cells change and compare to figures of plasmolysis
presented in class.
b. What process is causing this change?
i. Describe what is happening to the water molecules and plasma membrane
during this process.
Answers
The Plasmolysis of Plant Cells experiment, when a couple of drops of 5% NaCl solution are added to an Elodea wet mount, the cells will undergo plasmolysis.
What are Cells ?It is the smallest unit of life that can carry out all the functions of living things, such as metabolism, reproduction, and response to the environment.
The cell is made up of several structures, including the plasma membrane, cytoplasm, and genetic material. The plasma membrane is a lipid bilayer that encloses the cell and regulates the movement of molecules in and out of the cell. . The genetic material can be found in the form of DNA, which contains the genetic information needed for the cell to function and reproduce.
To know more about cells visit :
https://brainly.com/question/19853211
#SPJ1
Hormone pathways involved in maintaining homeostasis (such as the secretin pathway in the digestive tract) are often characterized by which of the following?
Question 5 options:
Local regulators such as prostaglandins
G protein-coupled receptors
Positive feedback
Multiple types of receptors
Negative feedback
Answers
Negative feedback is common in hormone pathways involved in homeostasis maintenance (such as the secretin pathway in the digestive system).
Negative feedback is a mechanism that uses a system's output to decrease the input or activity of that system. Negative feedback is used in hormone pathways to keep a stable internal environment or homeostasis by counteracting variations in hormone levels.
Negative feedback mechanisms are activated when hormone levels rise to reduce hormone production or release, and negative feedback mechanisms are activated when hormone levels decline to increase hormone production or release.
Local regulators such as prostaglandins, G protein-coupled receptors, positive feedback, and multiple receptor types are not always associated with hormone pathways involved in homeostasis maintenance.
Learn more about Hormones
https://brainly.com/question/30527782
#SPJ4
looking at this set of images, what is the minimum length of uv light exposure that could be used to disinfect an area contaminated with this bacteria?
Answers
Different bacteria have different levels of resistance to UV light, and the minimum length of UV light exposure required for disinfection will depend on the type of bacteria present and the intensity of the UV light source.
The susceptibility of various bacterial species to UV radiation varies for disinfection. Due to variations in the composition of their cell walls, DNA repair processes, and other characteristics, certain bacteria are more resistant to UV light than others.
For instance, UV radiation at a level of 40 mJ/cm2 can inactivate the bacterium Escherichia coli (E. coli), which is frequently employed as a reference species for studies on bacterial disinfection. As a result, the amount of UV light needed to disinfect an area contaminated with E. coli will vary depending on the UV light source's strength and the distance between it and the infected area.
To know more about disinfection click here
brainly.com/question/4641882
#SPJ4
W1 should not have fluoresced. Why? (I know it did not contain rGFP, but why?) W2-W4 should have fluoresced slightly. Give two possible reasons why.
Answers
W1 should not have fluoresced because it did not contain rGFP (recombinant Green Fluorescent Protein), which is required for fluorescence.
Two possible reasons why W2-W4 should have fluoresced slightly could be that they contained a small amount of rGFP, or they contained other proteins or molecules that can fluoresce when exposed to UV light. There are many possible reasons for why W1 should not have fluoresced, but the following are the most likely:There was no GFP in the sample to fluoresce, as you already mentioned.
There were not enough cells in the sample to produce a detectable level of fluorescence.There were too many cells in the sample, and the autofluorescence of the cells masked any fluorescence produced by the GFP.W2-W4 should have fluoresced slightly for the following reasons:There was GFP in the sample, but the expression was very low or the protein was not stable enough to produce strong fluorescence.There was a problem with the excitation or detection of the fluorescence signal, such as a filter issue or insufficient exposure time.
The cells were not properly prepared for imaging, and there was debris or other artifacts interfering with the fluorescence signal.Fluporeced is not a known term or concept, so it cannot be used in the answer.
For more such questions on fluoresced
https://brainly.com/question/30969939
#SPJ11
based on the data in the graph, which of the following should be used to calculate the difference in ld50 for the two different species of mice?
Answers
Based on the data in the graph 575mg−490mg should be used to calculate the difference in ld50 for the two different species of mice.
ToxicologyThe median lethal dose, also known as LD50, LC50, or LCt50, is a hazardous unit used in toxicology to assess the deadly dose of a toxin, radiation, or disease. The dose necessary to cause the death of 50% of a population under test after a predetermined test period is known as the LD50 value for a drug.Values for LD50 and LC50 are used to determine acute toxicity. The insecticide is more hazardous the lower the LD50. An illustration would be that a pesticide with an LD50 of 5 mg/kg is 100 times more toxic than one with an LD50 of 500 mg/kg. The following two values are given in milligrams per kilogram of the animal's body weight (mg/kg body wt.).For more information on LD50 kindly visit to
https://brainly.com/question/30481894
#SPJ1
What is the answer to this question?
