I need help wit this

Answer:

8.1 M

Explanation:

What is the initial concentration of a solution if 40.0 mL is diluted to make 720 mL of a 0.45 M solution?

LET Y = INITIAL CONCENTRATION

SO

Y TIMES 40/720 = 0.45 m

SO

Y= (0.45) X 720/40=

0.45 X 72/4 =

0.45 X 18 =8.1 M

Concentration is related to the mass and volume. 8.1 M  initial concentration of a solution is required if 40 ml is diluted to make 720 ml of a 0.45 M solution.  

The first measured concentration of a compound in a substance is called as initial concentration. Initial concentration also measure with the help of molarity.

Write out the equation C = m ÷ V, where m is the mass of the solute and V is the total volume of the solution. Substitute  the values you found for the mass and volume, and divide them to find the concentration of your solution.  

Let X is the initial concentration,

so, X times 40 ÷ 720 = 0.45

X = ( 0.45 ) × ( 720÷40)

= 0.45 × 18

= 8.1 M

Hence, 8.1 M  initial concentration of a solution is required .

To learn more about initial concentration follow the link below;

https://brainly.com/question/23546015

#SPJ2

Answer:

Molarity of aqueous solution of CaCl2 can be defined as moles of CaCl2 per litre of solution

Answer:

Functional group: ROR'

Homologous series: ester [C6H12O2]

Mark brainliest please

Answer:

BeCl2

Explanation:

Be+Cl2=BeCl2

A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.

We want to calculate the mass of CaCO₃ in a 1.60 g supplement. We need to consider the following relationships.

[tex]1.60gSup \times \frac{37.8gCa}{100gSup} \times \frac{1molCa}{40.08gCa} \times \frac{1molCaCO_3}{1molCa} \times \frac{100.09gCaCO_3}{1molCaCO_3} = 1.51gCaCO_3[/tex]

A 1.60 g calcium supplement that contains 37.8% Ca by mass, contains 1.51 g of CaCO₃.

Learn more: https://brainly.com/question/14990953

A 1.60 g calcium supplement contains 37.8% Ca by mass. The calcium is present in the supplement as CaCO₃(s) (molar mass 100.09 g/mol). How many grams of CaCO₃(s) are in the calcium supplement?

Answer:

latin

Explanation:

im not sure sorry if wrong

Answer:

Greek

Explanation:

Mid 17th century (in the sense 'compete with'): from Greek antagōnizesthai, from ant- 'against' + agōnizesthai 'struggle' (see agonize).

Answer:

Very low ionization energy: metal bonds easily: group 1, or maybe 2 low melting.

Explanation:

Answer:

x=403/24,3 = 16.58 gm MgO

EXPLANATION

The student burns 10 g of magnesium in air to produce magnesium oxide (MgO)

2Mg + 0 + 2MgO

Calculate the maximum mass of magnesium oxide that could be produced in the reaction.

Oxygen exist in nature as O2, diatomic.

so

The student burns 10 g of magnesium in air to produce magnesium oxide (MgO).

2Mg + 02 + 2MgO

Calculate the maximum mass of magnesium oxide that could be produced in the reaction.

2 moles of Mg produce 2 moles of MgO

1 mole of Mg weighs 24.3 and produces 1 mole of MgO

Mg HAS AN ATOMIC MASS OF 24.3

Mg HAS A MOLAR MASS OF 24.3 +16 = 40.3gm/mole

so 24.3 gm of Mg produce 40.3 gm MgO

set up the ratio

10 gm Mg/x of MgO  = 24.3/40.3

or

10/x = 24.3/40.3

cross multiply and isolate x (use Algebra I)

24.3x =403

x=403/24,3 = 16.58 gm MgO

Answer:

sneakers

Explanation:

Answer:

closed toe shoe

Explanation:

becusae if a cemcal spills it cant hurt your feet

Answer:

Mass is the amount of matter in an object

Answer:

Mass

Explanation:

matter is weighed by the mass of an object

Answer:

It depends

Explanation:

This could vary depending on the exact temp, time and minerals. something with alot of salt boils quicker than something without it, so 10.5 grams?

The particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.

Minerals are defined as a naturally crystallized element or chemical compound that was created through geological processes. Natural materials are those that form on their own, such as minerals. Minerals don't droop, melt, or evaporate since they are solids. In contrast to the carbon compounds found in living organisms, minerals are inorganic. Minerals are crystalline: They have a unique atomic composition and arrangement.

Temperature is defined as a measure of hotness or coldness expressed in terms of any number of arbitrary scales that shows the direction that heat energy will naturally flow, i.e., from a hotter body to a colder body. The three temperature scales that are now in use are Kelvin, Celsius, and Fahrenheit. Food, beverages, agriculture, and medical care for both people and animals all depend heavily on temperature.

Thus, the particular temperature, the passage of time, and the minerals could all affect the amount of grams of liquid water.

To learn more about minerals, refer to the link below:

https://brainly.com/question/18078524

#SPJ2

Answer:

750

Explanation:

Answer:

ans given below

Explanation:

To keep simplicity, let's assume these gases behave ideally so we can use the equations for ideal gas. One of these equation is the Raoult's Law written below.

P* = xP

This is another form of the Raoult's Law where x is the mole fraction. Let's find x for O2.

x = 0.18/(0.76+0.18+0.031+0.026) = 0.1805

Partial Pressure = (0.1805)(749 mmHg) = 135.23 mmHg

Answer:

False

Explanation: The wind's direction is shown by a long shaft. it will point to the direction from which direction the wind is blowing.

Answer:

zzxdczxc V

Explanation:

Answer:

5.01 moles

Explanation:

Calculate the number of moles in 400g of Tio2

first, write the formulas correctly

Calculate the number of moles in 400g of TiO2

capitalize the first letter of your elements

the molar mass of TiO2 is

47.88 +2X16.00 =47.88  +32.00 = 79.88 gm/mole

(to 3 sig fig = 79.9 gm/mole

400 gm/79.9 gm/mole = 400/79.9 mole gm/gm =

400/79.9 moles = 5.01 moles

Answer:

1G

Explanation:

Answer:NaF is ionic. NF3 is covalent. SiF4 is ionic. CaF2 is Ionic and  NH4F is also ionic. Ionic compounds transfer electrons whereas covalent compounds share electrons hence the word "co". Also, ionic compounds are formed with metal and nonmetal. Where a covalent is with 2 nonmetals. Only ionic compounds would produce fluoride in water because ionic compounds can dissolve in water and covalent compounds cant.

The compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].

The ionic compounds are formed by the transfer of electrons between the atoms of the compounds. The ionic bonds are weaker and are easy to dissociate in the aqueous solution.

The covalent compounds are formed by the sharing of electrons between the atoms. Since there is sharing, there has been a strong bond, that has been hard to dissociate.

The Mayor has to release Fluoride in the water, thus ionic compounds are preferred that have the easy release of fluorine.

From the given compounds:

Thus the compounds that can be used for the release of fluorine in water are NaF, [tex]\rm SiF_4[/tex], [tex]\rm CaF_2[/tex], and [tex]\rm NH_4F[/tex].

For more information about ionic and covalent compounds, refer to the link:

https://brainly.com/question/10748806

Answer:      162.2 g FeCl3. mL of soln = 0.07028 mol FeCl3x ... mol FeCl3 = mol Fe(OH)3 = 0.01291 mol ... (a) MaVa = MbVb since HCl and KOH react in a 1:1 molar ratio.

Explanation:

Answer:

2.04 Thermal Energy and Chemical Change Lab Report

Explanation:

Answer:

iodide

Explanation:

Answer:

Iron(II) iodide

Explanation:

3 peaks

Explanation:

You can do this perfectly well without referring to chemical shift tables at all. In the spectrum there are a total of three peaks - that means that there are only three different environments for the carbons, despite there being four carbon atoms.

The average mass of a marble can be determined by dividing the total mass of the marbles by the total number of marbles: average mass of a marble.

To find the density of any object, you need to know the Mass (grams) of the object, and its Volume (measured in mL or cm³). Divide the mass by the volume in order to get an object's Density.

Use the formula p=m/V, or density (p) is equal to mass (m) divided by volume (V).

To determine the density of a marble, we must know its mass and volume.

In order to determine the density of any substance we need to know its mass and volume.

Let's understand "Density".

Learn more:

brainly.com/question/17780219

Answer:

D. 4/2 He corresponds to an alpha particle.