I NEED THIS ASAAPPbrudbdjdbhsbdhd

Answer:

a)  [tex]m_v= 56.16 Kg[/tex]

    [tex]m_l= 14.04 Kg[/tex]

b)  [tex]\mu=1.37\%[/tex]

Explanation:

From the question we are told that:

Volume of tank [tex]V_t=1m^3[/tex]

Temperature of [tex]CO_2=-17^oC[/tex]

Quality of the mixture [tex]Q= 70%[/tex]

Specific Volume constants at [tex]-17^oC:[/tex]

 [tex]v_f = 0.9827*10^{-3} m3/kg[/tex]

 [tex]v_g =1.756*10^{-2} m3/kg.[/tex]

Generally the equation for Specific Volume is mathematically given by

 [tex]v = v_f + x (v_g -v_f)[/tex]

 [tex]v= (0.9827 * 10^{-3} ) + 0.8 * (17.56 * 10^{-3} -0.9827 * 10^{-3})[/tex]

 [tex]v= 0.014244 m3/Kg[/tex]

Generally the equation for Mass is mathematically given by

 [tex]m=\frac{v'}{v}[/tex]

 [tex]m=\frac{1}{0.014244}[/tex]

 [tex]m=70.20 Kg[/tex]

Generally the Mass of saturated Vapor is mathematically given by

 [tex]m_v=0.8 * (70.202)[/tex]

 [tex]m_v= 56.16 Kg[/tex]

Generally the Mass of saturated Liquid is mathematically given by

 [tex]m_l = (70.20 Kg)-(56.16 Kg)[/tex]

 [tex]m_l= 14.04 Kg[/tex]

b)

Generally the equation for Volume is mathematically given by

 [tex]v_l = m_l x v_f[/tex]

 [tex]v_l= (14.04 Kg) (0.9827 x 10{-3} m3/kg)[/tex]

 [tex]v_l= 0.01379 m^3[/tex]

Therefore Percentage of liquid

 [tex]\mu = \frac{v_l}{v} * 100 \%[/tex]

 [tex]\mu= [(0.01379 m^3)/(1 m^3)] *100 \%[/tex]

 [tex]\mu=1.37\%[/tex]

Answer:

Your answers would be

4. A. sperm and testosterone.

7. C. prostate, penis, Testes

uterus, vagina, fallopian tubes

10. B. Protein

11. A. carbohydrate

12. B. amino acids (I'm not positive on this i haven't taken bio in years

27. D. Respiratory system

Explanation:

yeah

Answer:

The water table is the upper surface of the zone of saturation. The zone of saturation is where the pores and fractures of the ground are saturated with water. It can also be simply explained as, the upper level, below which the ground is saturated.

Answer:

300cm^3

Explanation:

1ml = 1cm^3

=>300 ml = 300 cm^3

Answer:

Explanation:Gravitational force always acts on the ball in the downward direction, thus an acceleration due to gravity always point in the downward direction with a constant magnitude  10.6m/s  

Answer: True

Explanation:

Answer:

Explanation:

We don't need the mass of the car in the equation to solve for final velocity, since the values given for the acceleration and the time it took to accelerate to that velocity are given. The equation we need is the one for acceleration, which is

[tex]a=\frac{v_f-v_0}{t}[/tex] We are solving for final velocity, we know the initial velocity is 0 (starting from rest), and the time to complete this acceleration (10 m/s/s) is 3 seconds:

[tex]10=\frac{v_f-0}{3}[/tex] which is the same thing as saying

[tex]10=\frac{v}{3}[/tex] so

v = 30 m/s

Answer:

Option C. 20 V

Explanation:

We'll begin by calculating the equivalent resistance of the circuit. This can be obtained as follow:

Resistor 1 (R₁) = 20 Ω

Resistor 2 (R₂) = 40 Ω

Resistor 3 (R₃) = 60 Ω

Equivalent Resistance (R) =?

R = R₁ + R₂ + R₃ (series arrangement)

R = 20 + 40 + 60

R = 120 Ω

Next, we shall determine the current in the circuit. This can be obtained as follow:

Voltage (V) = 60 V

Equivalent Resistance (R) = 120 Ω

Current (I) =?

V = IR

60 = I × 120

Divide both side by 120

I = 60 / 120

I = 0.5 A

Finally, we shall determine the potential drop across R₂. This can be obtained as follow:

Current (I) = 0.5 A

Resistor 2 (R₂) = 40 Ω

Voltage (V) =?

V = IR₂

V = 0.5 × 40

V = 20 V

Therefore, the potential drop across R₂ is 20 V

Answer:

Acceleration is the rate of change of velocity. What is commonly said as ‘ten meter per second squared’ can bee broken down into ‘ten meter per second per second.’ This gives us the true meaning of the term acceleration.

Just like ‘ten meter per second’ means increasing the displacement by ten meters every second, ‘ten meter per second per second’ means increasing the velocity by ten meters per second every second.

So, basically if you consider the case of a free fall motion, where ‘t’ stands for time and ‘v’ stand for velocity at that instant:

At,

t=0, v=0 m/s

t=1, v=0+10 m/s;

t=2, v=0+10+10 m/s;

t=3, v=0+10+10+10 m/s;

This can also be thought as a Arithmetic Progression where common difference ‘D’ is the acceleration(a), since it adds a 10 m/s to velocity every second and the first term ‘A’ stands for the initial velocity (u). Using this approach we can derive to the first equation of motion:

v = u + at

Hope this Answer Helps!!

Explanation:

plz mark me as a brainlest and thank my answer

It means that the vehicle's speed increases at the rate of 10m/s every second.

At any time, it's speed is 10 m/s faster than it was 1 second earlier.

Answer:

The answer is below

Explanation:

i) Since the length of the second clock (radius) is 14 cm = 0.14 m, the distance covered by the second hand in one revelution is:

Distance covered = 2πr = 2π(0.14) = 0.88 m

The time taking to complete one revolution = 60 seconds, hence;

Speed = distance covered in one revolution / time take o complete a revolution

Speed = 0.88 m / 60 s = 0.0147 m/s

ii) Distance covered in 150 s = speed * 150 s = 0.0147 * 150 = 2.2 m

iii) Displacement in 150 seconds = distance from initial position to final position

At 150 s, the hand has covered 2 revolutions and moved 30 s. Hence:

Displacement in 150 seconds = speed * 30 s = 0.0147 * 30 = 0.44 m

Answer:

1. T₁ is approximately 100.33 N

T₂ is approximately -51.674 N

2. 230°F is 383.15 K

3. Part A

The total torque on the bolt is -4.2 N·m

Part B

Negative anticlockwise

Explanation:

1. The given horizontal force = 86 N

The direction of the given 86 N force = To the left (negative) and along the x-axis

(The magnitude and direction of the 86 N force = -86·i)

The state of the system of forces = In equilibrium

The angle of elevation of the direction of the force T₁ = 31° above the x-axis

The direction of the force T₂ = Downwards, along the y-axis (Perpendicular to the x-axis)

Given that the system is in equilibrium, we have;

At equilibrium, the sum of the horizontal forces = 0

Therefore;

T₁ × cos(31°) - 86 = 0

T₁ = 86/(cos(31°)) ≈ 100.33

T₁ ≈ 100.33 N

Similarly, at equilibrium, the sum of the vertical forces = 0

∴ T₁×sin(31°) + T₂ = 0

Which gives;

100.33 × sin(31°) + T₂ = 0

T₂ = -100.33 × sin(31°) ≈ -51.674

T₂ ≈-51.674 N

2. 230° F to Kelvin

To convert degrees Fahrenheit (°F) to K, we use;

[tex]Degrees \ in \ Kelvin, K = (x^{\circ} F + 459.67) \times \dfrac{5}{9}[/tex]

Pluggining in the given temperature value gives;

[tex]Degrees \ in \ Kelvin, K = (230^{\circ} F + 459.67) \times \dfrac{5}{9} = 383.15[/tex]

230°F = 383.15 K

3. Part A

Torque = Force × perpendicular distance from the line of action of the force

Therefore, the clockwise torque = 9 N × 0.4 m = 3.6 N·m (clocwise)

The anticlockeisre torque = 13 N × 0.6 m = 7.8 N·m (anticlockwise)

The total torque o the bolt = 3.6 N·m - 7.8 N·m = -4.2 N·m (clockwise) = 4.2 N·m anticlockwise

Part B

The torque is negative anticlockwise.

Answer:

Option C

Explanation:

Diverging lens are negative lens as they have negative focal length. Their

magnification is smaller than one.

They produce virtual image in which the refracted rays extended back in order to meet

Hence, option C is correct

Answer:

Velocity = distance / time

V = 10/1

V = 10km/h

Answer:10km/h or 2.77m/s.

Explanation:

Distance =10km

Time =1h

Velocity =10/1 =10km/h

Or,

Distance =10km =10000m

Time =1h =60min = 3600s

Velocity =10000/3600 =2.77m/s

Fundamental

forming a necessary base or core; of central importance.

"the protection of fundamental human rights"

Answer:

Explanation:

This is a Law of Momentum Conservbation problem, where the total energy of the system cannot increase or decrease, only change form. The total energy equation for this situation is

TE = PE + KE where TE is total energy, PE is potential energy, and KE is kinetic energy. We begin by realizing that the go-kart is motionless at the top of a hill. If the kart isn't moving, then it has no KE, but if it is up off the ground and has the potential to fall to a point lower than it is curremtly, it has potential energy. That means that the total energy available to this go-kart is found in its potential energy and will not change throughout the trip's entirety. Thus,

TE = PE + 0 and

TE = (50.0)(9.8)(10.0) so

TE = 4900 J and since that's the total energy available throughout the trip, and we are looking to find the height of the next hill where this is both potential and kinetic energy, then

4900 = PE + KE and

4900 = (50.0)(9.8)(h) + [tex]\frac{1}{2}(50.0)(1.0)^2[/tex] and

4900 = 490h + 25.0 and

4875 = 490h so

h = 9.9 m (I kinda ignored the rules for significant digits at the end, which goes against every teacher's bone in my body, but nonetheless, there's your answer!)

Answer:

vận tốc bằng quãng đường chia thời gian

Explanation:

v=s/t

Answer:

Workdone = 19600 Nm

Explanation:

Given the following data;

Mass = 40 kg

Distance = 50 meters

We know that acceleration due to gravity is equal to 9.8 m/s².

To find the work done;

First of all, we would determine the force being exerted by the construction worker.

Force = mass * acceleration due to gravity

Force = 40 * 9.8

Force = 392 Newton

Next, we would determine the work done;

Workdone is given by the formula;

[tex] Workdone = force * distance[/tex]

[tex] Workdone = 392 * 50 [/tex]

Workdone = 19600 Nm

Answer:

a. 2:3

b. The data illustrates the law of multiple proportions by showing that the the masses of oxygen that reacts with a fixed mass of sulfur are in a ratio of small whole numbers

Explanation:

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur dioxide = 32 grams

The weight of oxygen that combines with 32.06 grams of sulfur in sulfur trioxide = 48 grams

a. The ration of the weights of oxygen that combine with 32.06 g of sulfur = 32:48 = 2:3

b. The law of multiple proportions states that when two elements are able to interact chemically to form more than one compound, then the (different) weights of one of the element that combines with a fixed weight of the other element are in small whole number ratios

The data demonstrates the law of multiple proportions by showing that the ratios of the weights of oxygen that combine with a fixed weight of sulfur to form sulfur dioxide and sulfur trioxide is in the ratio of 2 to 3 which are small whole number ratios

answer = 33.4 net force.

Answer:

The beta decay takes place.

Explanation:

The reaction of radioactivity of carbon 14 to nitrogen 14 is

There is a beta decay.  

The reaction is

[tex]C_{6}^{14}\rightarrow N_{7}^{14}+\beta _{-1}^{0}+ energy[/tex]

Here some energy is released in form of neutrino.

Answer:

no

Explanation:

the equation can't be balanced because it doesn't have the same elements on each side of the equal sign.

The given equation is not a balanced chemical equation because it does not contain the same elements on both sides of the equation.

A chemical equation can be explained as the representation of a chemical reaction in terms of symbols of the substances. A balanced equation containing the same number of atoms of each element on either side of the equation.

The law of mass conservation is followed by every balanced chemical equation. By obeying this law, the total mass on the reactant side should be equal to the total mass on the product side in a balanced equation.

On both sides of the chemical equation, the same elements as well as an equal number of elements are present as the chemical reaction does not alter the identity of the elements. Therefore, the given equation is not a balanced chemical equation.

Learn more about the balanced chemical equation, here:

brainly.com/question/28294176

#SPJ2

Answer:

Dynamo

Explanation:

Dynamo started to rotate which is known as kinetic energy.When dynamo is in running it produces electricity.dynamo specially used for generating electricity.

Answer:

313kelvin

Explanation:

40 degree celcius plus 273=313K

Answer:

7.5 J

Explanation:

To answer the question given above, we need to determine the energy that will bring about the speed of 1 m/s. This can be obtained as follow:

Mass (m) = 15 Kg

Velocity (v) = 1 m/s

Energy (E) =?

E = ½mv²

E = ½ × 15 × 1²

E = ½ × 15 × 1

E = ½ × 15

E = 7.5 J

Therefore, to change the speed to 1 m/s, the employee must do a work of 7.5 J.

Answer:

3. ultraviolet and x rays

The two forms of electromagnetic energy are used to produce the most spectacular fluorescence when placed in darkness are ultraviolet and x rays.

Electromagnetic radiation is waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays.

Fluorescence is the process in which a substance absorbs light at a high energy, short wavelength and emits light at a lower energy, usually visible wavelength.

Ultraviolet rays is a type of electromagnetic waves in which the wavelength is shorter than visible rays. It is responsible for 10% of sunlight and causes sun tan. It is used to purify water in water purifiers. It kill germs.

X rays lies beyond ultraviolet rays. It is used to diagnose in medical field. It can destroy living tissues so excessive exposure should be limited to reduce harmful effect.

The color change of fluorescent minerals is most spectacular when the minerals are placed in darkness and exposed to electromagnetic energy shorter than visible light.

Ultraviolet and x rays are shorter than visible light so they exhibit fluorescent property.

To learn more about Electromagnetic radiation here

https://brainly.com/question/10759891

#SPJ2

Answer:

(a) Fourth harmonic

(b) 2 wavelengths

(c) wavelength = 1  m

Explanation:

11.

(a) It is fourth harmonic.

(b) The distance between the two consecutive nodes is half of wavelength, so there are two wavelength.

(c) The distance between the two consecutive node or the antinode is half of wavelength.

So, wavelength = 2/2 = 1 m