Answer:
The median is also the number that is halfway into the set. To find the median, the data should be arranged in order from least to greatest. If there is an even number of items in the data set, then the median is found by taking the mean (average) of the two middlemost numbers.
I hope it helps
how many of the electrons in a molecule of ethane are not involved in bondind
Ethane consists of 6C−H bonds and 1C−C bond. Total number of bonds is 7. Each bond is made up of two electrons
#LETS STUDY#BRAINLEST LOVE❣️
Write a balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
Explanation:
An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.
The full equation is;
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
So, two electrons were lost in the process.
Calculate the mass of sodium phosphate in aqueous solution to fully react with 37 g of chromium nitrate(III) an aqueous solution?(report answer in grams and only three Sigg figs do not put the unit)
Answer:
41 g
Explanation:
The equation of the reaction is;
Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)
Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles
1 mole of sodium phosphate reacts with 1 mole of chromium nitrate
x moles of sodium phosphate react as with 0.25 moles of chromium nitrate
x= 1 × 0.25/1
x= 0.25 moles
Mass of sodium phosphate = 0.25 moles × 163.94 g/mol
Mass of sodium phosphate = 41 g
Sometimes in lab we collect the gas formed by a chemical reaction over water . This makes it easy to isolate and measure the amount of gas produced.
Suppose the CO, gas evolved by a certain chemical reaction taking place at 50.0°C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 132. mL. Calculate the mass of CO, that is in the collection tube. Round your answer to 2 significant digits.
Answer:
0.17 g
Explanation:
Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.
So, number of moles, n = volume of gas, v/molar volume, V
n = v/V where v = 132 mL = 0.132 L and V = 22.4 L
So, substituting the values of the variables into the equation, we have
n = v/V
n = 0.132 L/22.4 L
n = 0.005893 mol
We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol
Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO
m = nM
m = 0.005893 mol × 28 g/mol
m = 0.165004 g
m ≅ 0.17 g to 2 significant digits
Elements that have the same number of electron rings are ?
Answer:
are in the same orbital
Explanation:
Answer:
are in the same orbit
Explanation:
complete the following steps.
Remember to follow lower numbered rules first.
Na2CO3(aq) + Pb(OH)2(aq) → NaOH (?) + PbCO3(?)
a. Write a balanced chemical equation. (1 pt)
b. If a reaction occurs, write the balanced
chemical equation with the proper states of matter
(i.e. solid, liquid, aqueous) filled in. If no reaction
occurs, write “No reaction.” (1 pt)
c. If a reaction occurs, write the net ionic equation
for the reaction. If no reaction occurs, write "no
reaction.” (1 pt)
Answer:
See explanation
Explanation:
a) The balanced reaction equation is;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3
b) When we include states of matter;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)
c) Complete ionic equation;
2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)
Net Ionic equation;
Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)
Classify the processes as endothermic or exothermic.
a. Ice melting
b. Water condensing on surface
c. Baking a cake
d. The chemical reaction inside an instant cold pack.
e. A car using gasoline
endothermic absorbs heat
exothermic gives heat
a. endothermic
b. exothermic
c. endothermic
d. exothermic
a. Ice melting - endothermic
b. Water condensing on the surface - exothermic
c. Baking a cake - endothermic
d. The chemical reaction inside an instant cold pack - endothermic
e. A car using gasoline - exothermic
What is an exothermic and endothermic reaction?An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.
While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.
In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.
The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.
Learn more about the exothermic process, here:
brainly.com/question/12321421
#SPJ5
A hypothetical A-B alloy of composition 53 wt% B-47 wt% A at some temperature is found to consist of mass fractions of 0.5 for both and phases. If the composition of the phase is 92 wt% B-8 wt% A, what is the composition of the phase
Answer:
the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
Explanation:
Given the data in the question;
Co = 53 or [ 53 wt% B-47 wt% A ]
W∝ = 0.5 = Wβ
Cβ = 92 or [ 92 wt% B-8 wt% A ]
Now, lets set up the Lever rule for W∝ as follows;
W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]
so we substitute our given values into the expression;
0.5 = [ 92 - 53 ] / [ 92 - C∝ ]
0.5 = 39 / [ 92 - C∝ ]
0.5[ 92 - C∝ ] = 39
46 - 0.5C∝ = 39
0.5C∝ = 46 - 39
0.5C∝ = 7
C∝ = 7 / 0.5
C∝ = 14 or [ 14 wt% B-86 wt% A ]
Therefore, the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
7. There are 7. 0 ml of 0.175 M H2C2O4 , 1 ml of water , 4 ml of 3.5M KMnO4 what is the molar concentration ofH2C2O4 ?
8. Using the data from question 7 what is the molar concentration of KMnO4 ?
10. From question number 7, what effect increasing the volume of water has on the reaction rate?
Answer:
7. 0.1021 M
8. 1.167 M
10. Increase in volume of water would lower the rate of reaction
Explanation:
7. What is the molar concentration of H₂C₂O₄ ?
Since we have 7.0 ml of 0.175 M H₂C₂O₄, the number of moles of H₂C₂O₄ present n = molarity of H₂C₂O₄ × volume of H₂C₂O₄ = 0.175 mol/L × 7.0 ml = 0.175 mol/L × 7 × 10⁻³ L = 1.225 × 10⁻³ mol.
Also, the total volume present V = volume of H2C2O4 + volume of water + volume of KMnO4 = 7.0 ml + 1 ml + 4 ml = 12 ml = 12 × 10⁻³ L
So, the molar concentration of H₂C₂O₄, M = number of moles of H₂C₂O₄/volume = n/V
= 1.225 × 10⁻³ mol/12 × 10⁻³ L
= 0.1021 mol/L
= 0.1021 M
8. Using the data from question 7 what is the molar concentration of KMnO₄ ?
Since we have 4.0 ml of 3.5 M KMnO₄, the number of moles of KMnO4 present n' = molarity of KMnO₄ × volume of KMnO₄ = 3.5 mol/L × 4.0 ml = 3.5 mol/L × 4 × 10⁻³ L = 14 × 10⁻³ mol.
Also, the total volume present V = volume of KMnO₄ + volume of water + volume of KMnO₄ = 7.0 ml + 1 ml + 4 ml = 12 ml = 12 × 10⁻³ L
So, the molar concentration of KMnO₄, M' = number of moles of KMnO₄/volume = n'/V
= 14 × 10⁻³ mol/12 × 10⁻³ L
= 1.167 mol/L
= 1.167 M
10. From question number 7, what effect increasing the volume of water has on the reaction rate?
Increase in volume of water would lower the rate of reaction because, the particles of both substances would have to travel farther distances to collide with each other, since there are less particles present in the solution and thus, the concentration of the particles would decrease thereby decreasing the rate of reaction.
The reversible reaction: 2SO2(g) O2(g) darrow-tn.gif 2SO3(g) has come to equilibrium in a vessel of specific volume at a given temperature. Before the reaction began, the concentrations of the reactants were 0.060 mol/L of SO2 and 0.050 mol/L of O2. After equilibrium is reached, the concentration of SO3 is 0.040 mol/L. What is the equilibrium concentration of O2
Answer:
[tex][O_2]_{eq}=0.030M[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly writing out the mathematical expression for the concentration of oxygen at equilibrium, given the initial one and the change due to the reaction extent:
[tex][O_2]_{eq}=0.050M-x[/tex]
Whereas [tex]x[/tex] can be found considering the equilibrium of SO3:
[tex][SO_3]_{eq}=2x=0.040M[/tex]
Which means:
[tex]x=\frac{0.040M}{2} =0.020M[/tex]
Thus, the equilibrium concentration of oxygen gas turns out:
[tex][O_2]_{eq}=0.050M-0.020M=0.030M[/tex]
Regards!
A uniform plastic block floats in water with 50.0 % of its volume above the surface of the water. The block is placed in a second liquid and floats with 23.0 % of its volume above the surface of the liquid.
What is the density of the second liquid?
Express your answer with the appropriate units.
Answer:
density of second liquid = 650 kg/m³
Explanation:
Given that:
The volume of the plastic block submerged inside the water = 0.5 V
The force on the plastic block = [tex]\rho_1V_1g[/tex]
[tex]= 0.5p_1 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
W [tex]= 0.5p_1 V_g[/tex]
[tex]\rho Vg = 0.5p_1 V_g[/tex]
[tex]\rho = 0.5 \rho _1[/tex]
where;
water density [tex]\rho _1[/tex] = 1000
[tex]\rho = 0.5 (1000)[/tex]
[tex]\rho = 500 kg/m^3[/tex]
In the second liquid, the volume of plastic block in the water = (100-23)%
= 77% = 0.7 V
The force on the plastic block is:
[tex]= 0.77p_2 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
[tex]W = 0.77p_2 V_g[/tex]
[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]
[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]
42 Organic compound may have names ending in -ane, -ene, -ol or -oic acid. How many of these endings indicate the compounds contain double bonds in their molecules? * (1 Point)
Answer: Organic compounds ending with the name (-ene) indicate that the compounds contain double bonds in their molecules.
Explanation:
Organic compounds are those molecules that contains carbon atoms (as their main element), hydrogen and oxygen which are usually present. The presence of numerous organic compounds is due to the following properties of carbon:
--> the exceptional ability of carbon atoms to catenate, that is, to combine with one another to form straight chains, branched chains or ring compounds containing many carbon atoms.
--> The ease with which carbon combines with hydrogen, oxygen, Nitrogen and halogens
--> The ability of carbon atoms to form single, DOUBLE or triple bonds.
The organic compound that has the name ending with -ene are known as the alkenes. The members of the alkene series are formed from the alkanes by the removal of two hydrogen atoms and the introduction of a DOUBLE BOND in the carbon chain. They are named after the corresponding alkanes by changing the -ane ending to -ene.
Note: the systematic name of a compound is formed from the root hydrocarbon by adding a suffix and prefixes to denote the substitution of the hydrogen atoms.
1. Most of the chemicals included in your General Chemistry Lab kit can be discarded down a drain. Describe a situation in which you would need to neutralize a chemical before discarding down a drain.
Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.
Explanation:
A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.
5.60g of glyceraldehydes was dissolved in 10ml of a solvent and placed in a 50mm cell if the rotation is 1.74 calculate the specific rotation?
Answer:
6.214 degrees-mL/gdm
Explanation:
The specific rotation α' = α/LC where α = observed rotation, L = length of tube and C = concentration of solution.
Given that α = 1.74, L = length of cell = 50 mm = 0.50 dm and C = m/V where m = mass of glyceraldehyde = 5.60 g and V = volume = 10 ml
So, C = m/V = 5.60 g/10 ml = 0.560 g/ml
Since α' = α/LC
substituting the values of the variables into the equation, we have
α' = α/LC
α' = 1.74/(0.50 dm × 0.560 g/ml)
α' = 1.74/(0.28 gdm/l)
α' = 0.006214 °mL/gdm
α' = 6.214 °mL/gdm
α' = 6.214 degrees-mL/gdm
A molecule of acetone and a molecule of propyl aldehyde are both made from 3 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The molecules differ in their arrangement of atoms. How do formulas for the two compounds compare? Both compounds have the same molecular formula, but have unique structural formulas. Both compounds have unique molecular formulas and structural formulas. Both compounds have the same structural formula, but have unique molecular formulas.
Explanation:
The structures of both acetone and propanal are shown below:
In the formula of propanal there is -CHO functional group at the end.
In acetone -CO- group is present in the middle that is on the second carbon.
The molecular formula is C3H6O.
Both have same molecular formula but different structural formulas.
Help!!!!!!!!!
I'm using plato
Answer:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Explanation:
Hey there!
In this case, according to the given information, we can firstly bear to mind the fact that each ball color represents a different element, for that reason we can tell the following:
- Two black balls: they represent a diatomic molecule composed by two atoms of the same element.
- One black ball and two black balls: they represent a compound formed by two different elements.
- One gray ball and two black balls: they represent a compound formed by two different elements.
- Two black-dotted balls: they represent a diatomic molecule composed by two atoms of the same element.
Regards!
In the given range,at what temperature does oxy gen have the highest solubility?
A chemical reaction in a bomb calorimeter evolves 3.86 kJ of energy in the form of heat. If the temperature of the bomb calorimeter increases by 4.17 K, what is the heat capacity of the calorimeter?
Answer:
925.66 J/K
Explanation:
Applying,
Q = CΔt............. Equation 1
Where Q = amount of heat, C = heat capacity of the calorimeter, Δt = rise in temperature.
make C the subject of the equation
C = Q/Δt.............. Equation 2
From the question,
Given: Q = 3.86 kJ = 3860 J, Δt = 4.17K
Substitute into equation 2
C = 3860/4.17
C = 925.66 J/K
Identify the oxidation half-reaction for this reaction:
Fe(s) + 2HCl(aq) → FeCl2(aq) + H2(g)
A. Fe2+ + 2e → Fe(s)
O B. H2(g) → 2H+ + 2e
O C. Fe(s) → Fe2+ + 2e
O D. 2H+ + 2e → H2(9)
Answer:
Fe(s)->Fe2+2e-
Explanation:
A.p.e.x
The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct
What is Oxidation reaction ?Oxidation reaction is a chemical reaction which can be described as follows ;
Addition of oxygen Removal of hydrogen Loss of ElectronAddition of electronegative atomRemoval of Electropositive elementIn the given reaction ;
Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)
Fe at RHS got converted to Fe²⁺ state at LHS which shows the gain of electron by Fe with in the reaction.
Therefore,
The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct
Learn More about redox reaction here ;
https://brainly.com/question/13978139
#SPJ2
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon.
The question is incomplete, the complete question is;
Identify the highest energy molecular process that occurs when a molecule absorbs a microwave photon
a) electronic excitation
b) bond breakage
c) molecular vibration
d) molecular rotation
Answer:
molecular rotation
Explanation:
Microwaves are part of the electromagnetic spectrum. They are lower energy, lower frequency radiation.
When molecules absorb infrared radiation, they transition between the rotational states of the molecule.
Hence, the highest energy molecular process that occurs when a molecule absorbs a microwave photon is molecular rotation.
For each of the following compounds, indicate the pH at which 50% of the compound will be in a form that possesses a charge and at which pH more than 99% of the compound will be in a form that possesses a charge.
ClCH2COOH (pKa = 2.86)
CH3CH2NH+3 (pKa = 10.7)
Express your answer using two decimal places
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Answer:
a. 2..86 b. 4.86 c. 10.7 d. 8.7
Explanation:
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 2.86
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.
pH = pKa + log0.99x/0.01x
pH = pKa + log0.99/0.01
pH = 2.86 + log99
pH = 2.86 + 1.996
pH = 4.856
pH ≅ 4.86
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 10.7
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.
pH = pKa + log0.01x/0.99x
pH = pKa + log1/99
pH = 10.7 - log99
pH = 10.7 - 1.996
pH = 8.704
pH ≅ 8.7
Please help me order these bonds urgent
Answer:
From least polar covalent to most polar covalent;
S-I< Br-Cl < N-H< Te-O
From most ionic to least ionic
Cs-F> Sr-Cl> Li- N> Al-O
Explanation:
Electro negativity refers to the ability of an atom in a bond to attract the shared electrons of the bond towards itself.
Electro negativity difference between two atoms is a key player in the nature of bond that exists between any two atoms. A large difference in electron negativity leads to an ionic bond while an intermediate difference in electro negativity leads to a polar covalent bond.
Based on electro negativity differences, the bonds in the answer have been arranged in order of increasing polar covalent nature or decreasing ionic nature.
Write the separation scheme for the isolation of triphenylmethanol from the reaction mixture once the reaction is complete. The separation begins after the addition of HCl and water to the reaction and includes the column chromatography procedure to further purify crude triphenylmethanol isolated in the day 1 procedure.
````````````````````
Use the Ka values for weak acids to identify the best components for preparing buffer solutions with the given pH values.
Name Formula Ka
Phosphoric acid H3PO4 7.5 x 10^-3
Acetic acid CH3COOH 1.8 x 10^-5
Formic acid HCOOH 1.8 x 10^-4
pH 1.9 =_________
pH 5.0 = ________
pH 3.9= ________
Answer:
pH= 1.9 then [tex]H_{3} PO_{4}[/tex]
pH = 5.0 , [tex]CH_{3} COOH[/tex]
pH = 3.9 , HCOOH
As we know range left [tex]pH= pKa+/- 1[/tex]
What is the oxidation state of nitrogen in N ?
Answer:
+5
Explanation:
A covalent bond is formed by the following process
Answer:
Covalent bonding occurs when pairs of electrons are shared by atoms.
Explanation:
Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.
For the following list of acids, rank the acids in strength from weakest acid to strongest acid.
a. FCH2OH
b. F2CHOH
c. CH3OH
d. F3COH
Answer:
CH3OH < FCH2OH < F2CHOH < F3COH
Explanation:
Let us recall that, for a carboxylic acid, the dissociation of the acid yields;
RCOOH ⇄RCOO^- + H^+
The ease of dissociation and release of the hydrogen ion depends on the nature of the group designated R.
When R is is a highly electronegative element, the -I inductive effect causes the hydrogen to become less tightly held by the C-Cl bond.
As the number of electron withdrawing substituents increaseses, the acid ionizes much more and becomes stronger.CH3OH < FCH2OH < F2CHOH < F3COH
Hence, the order of decreasing acid strength is;
The decomposition of ethyl amine, C2H5NH2, occurs according to the reaction: C2H5NH2(g)⟶C2H4(g)+NH3(g) At 85∘C, the rate constant for the reaction is 2.5 x 10-1 s-1. What is the half-life (in sec) of this reaction?
Answer:
2.772 seconds
Explanation:
Given that;
t1/2 = 0.693/k
Where;
t1/2 = half life of the reaction
k= rate constant
Note that decomposition is a first order reaction since the rate of reaction depends on the concentration of one reactant
t1/2 = 0.693/2.5 x 10-1 s-1
t1/2= 2.772 seconds
How can a Bose-Einstein condensate be formed? A. B super-heating a gas. B. By super-cooling certain types of solid. C. By super-cooling certain types of plasma. D. By super-heating a plasma
Answer:
C. By super-cooling certain types of plasma.
Explanation:
Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.
Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.
When certain types of plasma are super cooled, Bose-Einstein condensate are formed.
4) In water, Vanillin, C8H8O3, has a solubility of 0.070 moles of vanillin per liter of solution at 25C. What will be produced if 5.00 g of vanillin are added to 1 L of water at 25 C
Answer:
An unsaturated solution.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to firstly realize we need to calculate the grams of vanillin in 0.070 moles by using its molar mass of 152.15 g/mol:
[tex]m=0.070mol*\frac{152.15 g}{1mol} =10.65g[/tex]
Thus, since the solubility is 10.65 g per 1 L of solution, we can notice 5.00 g will complete dissolve and produce an unsaturated solution.
Best regards!
