Answer:
If 1000. mL of water freezes, which of the following is a reasonable approximation for the volume of the resulting ice?
Group of answer choices
1000. mL
961 mL
1040 mL
Explanation:
Ice is fewer denser than water.
The reason is the volume occupied by the same mass of ice with water is more than the volume occupied by water. Ice has more empty space within it.
Due to this reason, ice floats on water.
When 1000ml of water freezes to ice then its volume is greater than water.
Among the given options the correct answer is 1040 mL .
Diego is trying to lift a piano to the second floor of his house. Diego uses a pulley system and gives a big lift to the piano.The piano moves upward, then stops, and then it starts to fall to the ground. (The direction of the force of gravity is negative.) Which list best describes the forces on the piano in the proper order
Answer:
positive force → balanced force → negative force
Explanation:
np
Answer:
positive force → balanced force → negative force
Explanation:
:)))
The bottle slides down the hill and is moving at a velocity of 14 meters/second the instant it hits the ground. The vertical height from where Jeff dropped the bottle is meters. Ignore friction, and use , PE = m × g × h, and g = 9.8 m/s2.
Answer:
10 m
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 14 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Next, we shall determine the energy. This can be obtained as follow:
Velocity (v) = 14 m/s
Kinetic Energy (KE) =?
KE = ½mv²
KE = ½ × m × 14²
KE = ½ × m × 196
KE = m × 98
Finally, we shall determine the height. This can be obtained as follow:
Kinetic energy (KE) = m × 98
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
Since the object is falling from a particular height,
Potential energy (PE) = kinetic energy (KE)
PE = mgh
KE = m × 98
m × 9.8 × h = m × 98
Divide both side by m × 9.8
h = m × 98 / m × 9.8
h = 10 m
Thus, the bottle was dropped from a height of 10 m
PLEASE HELP
Which of the following correctly orders the types of radiation from the LONGEST wavelength to the SHORTEST wavelength?
A. Green Visible Light, Red Visible Light, Blue Visible Light, Ultraviolet
B. Microwave, Orange Visible Light, Ultraviolet, Violet Visible Light
C. Red Visible Light, Infrared, Microwaves, Radio waves
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Answer:
D. Microwave, Blue Visible Light, Ultraviolet, Gamma
Explanation:
colors longest to shortest are
red green blue violet
longest wavelength to shortest:
radio waves, microwaves, infrared, optical, ultraviolet, X-rays, and gamma-rays.
What are this element’s chemical and physical properties? Explain how the chemical properties affect the physical properties of an element.
Answer:
What element is this. Would you mind inserting a picture or naming the element in the comments section
Amino acids that must be obtained through the diet are called O A) cholesterol. OB) non-essential amino acids. o C) essential amino acids. The OD) peptides.
Answer:
I belive C: essential amino acids
Explanation:
They can t be made from the body so they must be obtained my food
WHAT IS KNOWN AS HYBRIDIZATION
[tex] \red{ \bold {\huge{ \textit{ \boxed {{\blue{QUESTION}}}}}}}[/tex]
WHAT IS KNOWN AS HYBRIDIZATION
[tex]\huge\boxed{\fcolorbox{red}{blue}{ ANSWER }}[/tex]
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{HYBRIDIZATION}}}}}}} [/tex]
It is the change in the orbitals of the central atom of the molecule to form bonds with other atom if same type or another type.The hybrid orbitals r of same level .
The Hybridization takes place in between orbitals of equal or very less energy levels to form same level of energy in all orbitals.
The orbitals combine is always equal to The number of orbitals formed
The names of hybridized orbitals r kept according to the orbital which r combined to form them
Eg:-sp orbital :- one s and one p combine to form sp orbital
[tex]s {p}^{2} [/tex]orbital :- one s and two p orbitals combine to form it..
[tex]\:\:\:\:\:\:\:\:\star DEVIL005\star[/tex]
Pleaseeeeeeee Help ASAP!!
Formula of xenon trioxide = XeO3
Relative atomic mass: Xe = 131.29, O = 16
Question 1
number of moles = mass / molar mass
n of XeO3 = 9.07 / 131.29 + 3(16)
= 0.05059 mol
number of moles = number of particle / Alvagadro's constant
0.05059 = number of molecule / 6.02 x 10²³
number of molecules = 3.046 x 10²²
Question 2
number of moles = number of particle / Alvagadro's constant
number of moles = 3.22 x 10²² / 6.02 x 10²³
number of moles = 0.05349 mol
number of moles = mass / molar mass
0.05349 = mass / 131.29 + 3(16)
mass = 9.590g
Find the mass in grams of 15.00 moles of AICI:
Answer:
937.5g
Explanation:
No of moles = mass ÷ molar mass
According to this question, there are 15moles of the compound; AlCl
Molar mass of AlCl = 27 + 35.5
= 62.5g/mol
Using n = m/M.M
15 = m/62.5
m = 15 × 62.5
m = 937.5g
From the options provided for each element below, choose the properties that it may have based on its location in the periodic table.
Fluorine (F):
highly reactive nonmetal
shiny
a conductor
Answer:
highly reactive nonmetal
Explanation:
Fluorine is a member of group 7 elements on the periodic table called HALOGENS. Just like other members of its group like chlorine, iodine etc., fluorine is a nonmetallic element. Fluorine is regarded as the most reactive element on the periodic table because of its affinity to accept electrons i.e. most electronegative element.
According to this question, fluorine is an highly reactive nonmetal based on its location on the periodic table.
Answer:
highly reactive nonmetal
Explanation:
edge 21
Which of the following is a base? (3 points)
AgO
Ca(OH)2
HF
NaCl
Answer:
Ca(OH)2 is base
is answer of this question
hope this will help you more
Answer:
Ca(OH)2
Explanation:
Got it right on the test
Locations Cost of land Cost of equipment Cost of mining and reclamation Time taken to mine the area 1 $100,000 $10,000 $5,000 per day 30 days 2 $35,000 $6,000 $4,500 per day 45 days 3 $30,000 $7,500 $3,500 per day 120 days 4 $40,500 $8,000 $7,000 per day 65 days Considering all costs, which location will cost the least to the company to mine?
Answer:
Location 2 will cost the least to the company to mine.
Explanation:
a) Data and Calculations:
Locations Cost of land Cost of Cost of mining Time taken to
equipment and reclamation mine the area
1 $100,000 $10,000 $5,000 per day 30 days
2 $35,000 $6,000 $4,500 per day 45 days
3 $30,000 $7,500 $3,500 per day 120 days
4 $40,500 $8,000 $7,000 per day 65 days
Locations Cost of land Cost of Cost of mining Total
equipment and reclamation Costs
1 $100,000 $10,000 $150,000 ($5,000 * 30) $260,000
2 $35,000 $6,000 $202,500 ($4,500 * 45) $243,500
3 $30,000 $7,500 $420,000 ($3,500 * 120) $457,500
4 $40,500 $8,000 $445,000 ($7,000 * 65) $503,500
The elements beryllium, calcium, and strontium are all in group 2. What is the correct relationship of these elements regarding their ionization energy?
Answer: The correct relationship of these elements regarding their ionization energy is Strontium < Calcium < Beryllium.
Explanation:
The amount of energy required to remove the most loosely bound electron in an atom is called ionization energy.
Larger is the size of an atom, more easily it can lose an electron. Since the size of atoms increases on moving down in a periodic table so ionization energy decreases down the group.
For example, beryllium, calcium, and strontium are elements of group 2. Strontium is the largest in size and beryllium is the smallest in size.
Hence, the ionization energy of group 2 elements in the increasing order is as follows.
Strontium < Calcium < Beryllium
Thus, we can conclude that the correct relationship of these elements regarding their ionization energy is Strontium < Calcium < Beryllium.
Balance equation for. _Mg + _H3(PO4) --_Mg3(PO4)2+ _H2
what is a saturted solution
Answer:
Please find the definition and further explanation below
Explanation:
Based on the ability for the solvent (liquid substance) to dissolve a solute (solid substance), a solution can either be unsaturated, saturated or supersaturated. A SATURATED SOLUTION is that which contains the maximum amount of solute a solvent can possibly dissolve.
In other words, a saturated solution can no longer dissolve anymore solute, and hence, any further solute added forms crystals or makes the solution supersaturated.
cuantos gramos y moleculas de dioxido de carbono hay en 0.5 moles de dioxido de carbono
paso a paso
Answer:
metro= 22g
Explanation:
Why is the charge on a charged sphere distributed uniformly over its surface?
-Similar charges seek to be the minimum distance possible from each other.
-Opposite charges seek to be the maximum distance possible from each other.
-Similar charges seek to be the maximum distance possible from each other.
-None of the above
Answer:
Similar charges seek to be the maximum distance possible from each other
Explanation:
On a charged sphere, there are like charges and these like charges are repelled by each other to the far ends of the sphere. Hence they are distributed uniformly in the sphere.
Calculate the average atomic mass element X
Answer:
39.02 amu
Explanation:
The average atomic mass of an element can be calculated as follows :
[tex]X=\dfrac{9.67\times 38+78.68\times 39+11.34\times 40+0.31\times 41}{100}\\\\X=\dfrac{3902.29}{100}\\\\X=39.02\ amu[/tex]
So, the atomic mass of the element X is 39.02 amu.
The molecule that functions as the reducing agent (electron donor) in a redox or oxidation-reduction reaction _____.
Help me please guys
Answer:
D. 2
Explanation:
On the right side of the equation:
Al has 1, Zn has 3, NO3 has 6
But on the left side:
Al has 1, Zn has 1, NO3 has 3
1. So, if we add a coefficient of 2 to Al(NO3)3, then NO3 now has 6-which is what it needs.
2. But now the Al on the right side of the equation is not balanced, so give it a coefficient of 2.
3. To make the Zn balance, just add a coefficient of 3 on the left side of the equation.
Which leaves us with:
2Al + 3Zn(NO3)2 --> 2Al(NO3)3 + 3Zn
And now there are the same number of each compound on both sides of the equation.
Good luck! If you have any questions on this answer leave a comment :)
Suggest two ways Becky could make tea dissolve more quickly
NO FIlES OR REPORTED
Answer:
heat mixture/stir
Explanation:
these are factors of dissolving of solvent faster
How many moles of atoms does H2O
Calculate the average atomic mass for element X.
(Please HELP)
if sneezing is the response to smelling food is it conditioned or unconditioned
Answer:
i think its unconditioned response.hope it helpsstay safe healthy and happy.The carbonyl carbon in a ketone is attacked primarily by the peroxy oxygen bonded to hydrogen as opposed to the peroxy oxygen bonded to carbon because:
Answer:
This is because peroxy oxygen bonded to hydrogen can easily undergo nucleophilic protonation with the carbonyl carbon to form an alcohol
Explanation:
A ketone is a functional group that contains a carbonyl group (carbon-oxygen double bond ( R1R2-C=O).
The carbonyl carbon doubly bonded to the oxygen is electron deficient as a result of difference in electronegativity between carbon and oxygen, hence is susceptible to nucleophilic attacks
R1R2 - C = O
where R1 and R2 are organic substituents.
The peroxy oxygen that is bonded to hydrogen (H -O-O-R) is the electron-rich centre and easily attacks electron-deficient centres like the carbonyl carbon in ketones to form an alcohol.
The bond between the hydrogen attached to the peroxy oxygen is broken and the resultant hydrogen ion undergoes protonation with the oxygen of the carbonyl group to form an alcohol
R1R2 - C = O + H - O-O - R =>
R1R2- CH - OH + R - O-O-R1
How does the alcohol enter the body? Describe the process. Where does most of the absorption take place?
Explanation: Once swallowed, a drink enters the stomach and small intestine, where small blood vessels carry it to the bloodstream. Approximately 20% of alcohol is absorbed through the stomach and most of the remaining 80% is absorbed through the small intestine.
2. Find the slope of the line that passes between the points (12,5) and (2,3).
Write your formula for Slope
m=y2 −y1/x2-x1
Explanation:
3-5/2-12=1/5
How can I balance chemical equations by providing the correct coefficients? For example: [?]Pb(NO3)2 + [?]NaCrO4 = [?]PbCrO4 + [?]NaNO3
Answer:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
The coefficients are: 1, 1, 1, 2
Explanation:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
The above equation can be balance as follow:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + NaNO₃
There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by writing 2 before NaNO₃ as shown below:
Pb(NO₃)₂ + Na₂CrO₄ —> PbCrO₄ + 2NaNO₃
Now the equation is balanced.
The coefficients are: 1, 1, 1, 2
HELP HELP HELP PLSSS
Answer:
the answer is c kept in blue and with light
Calculate the Empirical Formula for the following compound:
0.300 mol of S and 0.900 mole of O.
Answer:
[tex]\boxed {\boxed {\sf SO_3}}[/tex]
Explanation:
An empirical formula shows the smallest whole-number ratio of the atoms in a compound.
So, we must calculate this ratio. Since we are given the amounts of the elements in moles, we can do this in just 2 steps.
1. DivideThe first step is division. We divide the amount of moles for both elements by the smallest amount of moles.
There are 0.300 moles of sulfur and 0.900 moles of oxygen. 0.300 is smaller, so we divide both amounts by 0.300
Sulfur: 0.300/0.300= 1 Oxygen: 0.900/0.300= 3 2. Write Empirical FormulaThe next step is writing the formula. We use the numbers we just found as the subscripts. These numbers go after the element's symbol in the formula. Remember sulfur is S and there is 1 mole and oxygen is O and there are 3 moles.
S₁O₃This formula is technically correct, but we typically remove subscripts of 1 because no subscript implies 1 representative unit.
SO₃[tex]\bold {The \ empirical \ formula \ for \ the \ compound \ is \ SO_3}}[/tex]
Methane is approximately 23 times more powerful than carbon dioxide as a greenhouse gas. Which are significant sources of methane emissions
Answer:
anthropogenic sources like landfills, agricultural activities,coal mining and combustion and some sources are natural ones
