If 110 grams of potassium chloride are mixed with 100 grams of water at 20°C, how much will not dissolve?

The size of particles has an effect on the rate of dissolving, but temperature is also a significant factor that affects how quickly a solid will dissolve in water. Lowering the temperature slows down the movement.

Temperature is a measure of the average kinetic energy of the particles in a substance or system. In simpler terms, it is a measure of how hot or cold something is. The temperature of a substance or system is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F), and it can be influenced by various factors such as heat transfer, pressure, and the presence of other substances. Temperature is an important physical property that affects many aspects of daily life, including weather patterns, cooking, and the functioning of electronic devices. It is also a critical factor in many scientific processes, such as chemical reactions, phase transitions, and the behavior of materials at the atomic and molecular level.

To know more about temperature visit:

https://brainly.com/question/11464844

#SPJ1

The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.

Let's understand this in detail:

1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.

2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.

3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.

4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.

5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.

5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.

Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825

#SPJ11

As sodium acetate is added to the solution, the sodium ions (Na+) will replace the hydrogen ions (H+) in the equation. This causes a shift in the equilibrium as the number of hydrogen ions (H+) decreases, while the number of acetate ions (CH3COO-) increases.

Sodium acetate is an ionic compound composed of Na⁺ and CH₃COO⁻ ions.

It dissociates in water to create these ions, which are then available to affect the dissociation of acetic acid.

The equilibrium of acetic acid dissociation is influenced by the addition of sodium acetate.

Acid dissociation equilibria are influenced by salt addition (usually sodium salts), particularly when the acid is weak.

This is due to the fact that the anion of the salt reacts with hydrogen ions from the acid's dissociation.

This decreases the concentration of hydrogen ions in the solution, causing the reaction to shift towards more dissociation.

Learn more about acid dissociation constant here:

https://brainly.com/question/3006391

#SPJ11

To titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Titration is a technique used in analytical chemistry to determine the concentration of a specific analyte. The method involves the gradual addition of a standard solution to a sample containing the unknown analyte until the chemical reaction between the two is complete. The concentration of the unknown analyte can be calculated once this happens.

The balanced equation for the reaction between Na₂C₂O₄ and KMnO₄ is shown below:

5Na₂C₂O₄ + 2KMnO₄ + 8H₂SO₄ → 2MnSO₄ + 10CO₂ + 5Na₂SO₄ + 8H₂O

To titrate the given sodium oxalate solution, the volume of KMnO₄ needed must be determined. The molar mass of Na₂C₂O₄ is 134.00 g/mol.

Mass of Na₂C₂O₄ = 0.355 g

Moles of Na₂C₂O₄ = (0.355 g)/(134.00 g/mol) = 0.00265 mol

From the balanced equation, it can be seen that 2 moles of KMnO₄ are required to react with 5 moles of Na₂C₂O₄. As a result, the number of moles of KMnO₄ needed can be calculated.

Moles of KMnO₄ = (2/5) × 0.00265 mol = 0.00106 mol

The volume of 0.0100 M KMnO₄ needed can now be determined using the molarity equation.

Molarity (M) = moles (n) / volume (V)

n = M × V

V = n / M = 0.00106 mol / 0.0100 M = 0.106 L = 0.0234 L (to three significant figures)

Therefore, to titrate a solution containing 0.355 g of sodium oxalate, 0.0234 L of 0.0100 M KMnO₄ is needed.

Learn more about Titration here: https://brainly.com/question/186765

#SPJ11

D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.

We use anhydrous diethyl ether since Grignard reagents react with O2 to form hydroperoxides, vapors from highly volatile diethyl ether solvent prevents O2 from reaching the reaction mixture. Option A is the correct answer.

Anhydrous diethyl ether is commonly used as a solvent in Grignard reactions. The main reason for using anhydrous diethyl ether is to prevent the Grignard reagent from reacting with moisture or oxygen in the air, which would lead to unwanted side reactions or a reduction in the yield of the desired product.

Diethyl ether is highly volatile, and its vapors help to exclude oxygen from the reaction mixture, preventing the formation of hydroperoxides. Additionally, diethyl ether helps to dissolve the reactants and stabilize the Grignard reagent, making it more reactive towards the substrate. Hence option A is correct.

To know more about diethyl ether, here

brainly.com/question/28623053

#SPJ4

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

The molecule which would have the highest boiling point is 2-methylhexane. Thus, the correct option will be D.

The boiling point is the temperature at which the vapor pressure of a liquid is equal to the external pressure. The boiling point of a liquid is a measure of its vapor pressure. The higher the boiling point, the higher the vapor pressure of the liquid, and the more heat is required to vaporize it.

The boiling point of a substance is affected by the strength and types of intermolecular forces. The stronger the intermolecular forces, the higher the boiling point. 2-methylhexane has highest boiling point because it has the highest number of carbons and branches, which contribute to its strong intermolecular forces that lead to a higher boiling point.

Therefore, the correct option is D.

Learn more about Boiling point here:

https://brainly.com/question/25777663

#SPJ11

The phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out is known as Shielding.

Electrons in an atom are negatively charged particles, and they are attracted to the positively charged nucleus. However, the outer electrons of an atom are also repelled by the inner electrons that are closer to the nucleus. This repulsion is due to the negative charges of the electrons, and it partially cancels out the attraction of the nucleus for the outer electrons.

Shielding is the phenomenon in which electrons that are closer to the nucleus slightly repel those that are farther out. This makes it possible for electrons in higher energy levels to be farther from the nucleus, so they are less strongly attracted and easier to remove.

Learn more about Shielding here: https://brainly.com/question/27985711

#SPJ11

The line spectrum observed for the hydrogen atom by Niels Bohr is significant because it provided evidence for the quantization of energy levels in atoms.

Bohr's model proposed that electrons in atoms occupy specific energy levels or orbits around the nucleus, and that they can only absorb or emit energy in discrete amounts as they transition between these energy levels. When an electron in hydrogen is excited to a higher energy level by absorbing energy, it eventually returns to its original energy level by emitting energy in the form of light, which is observed as the line spectrum.

However, the Bohr model had some inadequacies. It couldn't explain the spectral lines of atoms other than hydrogen, and it couldn't account for the fine structure of spectral lines due to electron spin. Also, the model violated the Heisenberg uncertainty principle, which states that it is impossible to simultaneously determine the exact position and momentum of an electron.

To calculate the energy required to excite a hydrogen electron from level n=1 to n=3, we can use the formula:

ΔE = E3 - E1 = (-13.6 eV/n²) [(1/3²) - (1/1²)]

where E1 and E3 are the energy levels corresponding to n=1 and n=3, respectively. Plugging in the values gives:

ΔE = (-13.6 eV/n²) [(1/3²) - (1/1²)] = (-13.6 eV) [(1/9) - 1] = 10.2 eV

Therefore, the energy required to excite a hydrogen electron from level n=1 to n=3 is 10.2 eV.

To know more about quantization click here:

brainly.com/question/17018137

#SPJ4

When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.

Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.

Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.

Learn more about celiac disease here: https://brainly.com/question/16779711

#SPJ11

A) The solute in tank B will dissolve first, is the key response.Temperature, pressure, and concentration are only a few examples of the variables that affect a solute's solubility in a solvent. As the water in both tanks A and B is originally pure.

in this instance the solute in tank B will dissolve first due to its larger concentration than in tank A. The concentration gradient between the solute and the water narrows as the solute in tank B dissolves and diffuses into the surrounding water, slowing the rate of dissolution. The solute in tank A will also eventually dissolve, but because of its lower initial concentration, it will do so more gradually.I am unable to tell which solute will dissolve first because the relevant illustration is not given. However, a number of variables, including temperature, pressure, and the chemical makeup of the solute and solvent, affect how soluble a solute is in a solvent. The solute that is more soluble in the given solvent will often dissolve first. It is impossible to predict which solute will dissolve first without more details or context.

learn more about solute in tank  here:

https://brainly.com/question/9589556

#SPJ4

Answer: -230 N

Explanation:

The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:

F = k * (q1 * q2) / r^2

where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:

F = k * (q * (-q)) / r^2 = -k * q^2 / r^2

Substituting the given values of e and k, we get:

F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N

Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:

-230 N.

Answer:

Explanation: If the red litmus paper is inserted into the solution and the color remains unchanged, it indicates that the solution is likely a neutral solution or a solution with a pH close to 7. This means that it may contain either water or a salt solution.

To further confirm whether the solution contains a salt or water, we can perform a simple test using blue litmus paper. We can dip a blue litmus paper into the solution, and if it turns red, it indicates that the solution is acidic. If it remains blue, it indicates that the solution is basic.

If the blue litmus paper also does not change its color, it means that the solution is neutral or has a pH close to 7, which supports the possibility that the solution may contain either water or a salt solution.

To further test whether the solution contains a salt or not, we can perform a flame test. We can take a small amount of the solution and place it on a platinum wire loop and hold it in a Bunsen burner flame. If the flame produces a characteristic color, it indicates that the solution contains a salt. The characteristic color of the flame will depend on the metal ion present in the salt.

Overall, based on the initial test with the red litmus paper, the solution is likely neutral or close to neutral, and additional tests with blue litmus paper and flame test can be used to confirm whether the solution contains a salt or water.

Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.

The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.

When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.

So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.

However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.

Learn more about substrate concentration here:

https://brainly.com/question/22428921

#SPJ11

Ernest Rutherford, a New Zealand physicist, conducted the gold foil experiment and discovered that the atom has a positively charged nucleus.

In 1911, he conducted an experiment in which he fired alpha particles at a thin sheet of gold foil. The majority of the particles went straight through the gold foil, but a small percentage of the particles bounced back. He discovered that the bouncing back was caused by a small, positively charged nucleus at the center of the atom. Rutherford's experiment was crucial to our understanding of the structure of the atom. Prior to his experiment, the prevailing model of the atom was that it was a solid, indivisible sphere.

However, Rutherford's experiment showed that the atom was mostly empty space, with a positively charged nucleus at its center. This discovery paved the way for future research into atomic structure and helped to lay the foundation for the development of nuclear physics.

For more questions on Ernest Rutherford

https://brainly.com/question/28809146

#SPJ11

Answer:

chelated zinc is more easily absorbed than zinc on it's own.

57.0 ml of 0.90 m solution of Hcl was diluted by water. the pH of this diluted solution is 0.90. 50.5 mL water was added to the original solution .

There are a few steps to solve this.

Here they are: First, calculate the initial concentration of HCl in the solution.

Molarity = moles of solute / volume of solution in liters.

The volume of the solution is 57.0 mL, which is 0.0570 L.

The molarity is 0.90 M. So,0.90 M = moles of HCl / 0.0570 L

Now we can solve for moles of HCl:

moles of HCl = 0.90 M x 0.0570 L = 0.0513 mol

Next, we need to use the pH to find the concentration of H+ ions.

pH = -log[H+]0.90 = -log[H+]

Solving for [H+],

we get:[H+] = 7.94 x 10^-1 M

Finally, we can use the concentration of H+ ions to find the new volume of the solution after dilution using the equation:[H+] x V = moles of HCl7.94 x 10^-1 M x V = 0.0513 mol

Solving for V,

we get: V = 6.47 x 10^-2 L

To find how much water was added,

we subtract the final volume from the initial volume:

Volume of water added = 57.0 mL - 6.47 mL = 50.5 mL (rounded to 3 significant figures)

Therefore, 50.5 mL of water was added to the original solution.

For more such questions on pH , Visit:

https://brainly.com/question/172153

#SPJ11

The correct electron geometry (eg) and molecular geometry (mg) for [tex]NH_3[/tex] is a. eg = tetrahedral, mg = trigonal pyramidal, [tex]sp^3[/tex].

Learn more about electron geometry: https://brainly.com/question/7283835

#SPJ11

When benzoquinone is treated with excess butadiene, the products obtained are 2,5-dimethylcyclohexadiene-1,4-dione and cyclohexene.

Benzoquinone is also known as 1,4-benzoquinone or cyclohexa-2,5-diene-1,4-dione, is a colorless organic compound. The presence of two carbonyl groups in its structure provides it its characteristic quinone chemistry.

Butadiene, also known as 1,3-butadiene, is a conjugated diene. The reaction between benzoquinone and butadiene is called a Diels-Alder reaction.

The Diels-Alder reaction is a conjugate addition reaction that joins a diene and a dienophile to create a new six-membered ring. The most important characteristic of the Diels-Alder reaction is its stereospecificity. This reaction occurs between a cyclic diene and an alkene or alkyne dienophile.

The products obtained when benzoquinone is treated with excess butadiene are:2,5-dimethylcyclohexadiene-1,4-dioneCyclohexeneThe reaction proceeds with the dienophile (benzoquinone) being attacked by the diene (butadiene) in the Diels-Alder reaction to produce a cyclic adduct. The product is 2,5-dimethylcyclohexadiene-1,4-dione. Cyclohexene is formed as a byproduct of the reaction.

Learn more about Benzoquinone here:

https://brainly.com/question/15014857

#SPJ11

In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.

A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.

A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.

Learn more about anode at:

https://brainly.com/question/17109743

#SPJ11

The idea of punctuated equilibrium asserts that some evolutionary changes may not even involve intermediate forms.

The idea of punctuated equilibrium is a theory in evolutionary biology that proposes that most evolutionary changes occur relatively rapidly, with long periods of stability punctuated by rare instances of rapid evolutionary change.

The theory was first introduced by Niles Eldredge and Stephen Jay Gould in 1972 as a challenge to the traditional Darwinian theory of gradualism, which posits that evolution proceeds slowly and steadily over long periods of time.

According to punctuated equilibrium, some evolutionary changes may not even involve intermediate forms.

There are several examples of punctuated equilibrium in the fossil record, including the Cambrian explosion, which saw the sudden appearance of most major animal phyla in a relatively short period of time, and the rapid diversification of mammals following the extinction of the dinosaurs at the end of the Cretaceous period.

Learn more about Punctuated equilibrium here:

brainly.com/question/4430933

#SPJ11

Answer:

a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde

CH3CH2OH + [O] → CH3CHO

b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene

CH3CH2OH + [O] → CH2=CH2 + H2O

c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal

CH3CH2CH2OH + [O] → CH3CH2CHO

d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)

(CH3)2CHOH + [O] → (CH3)2CO

e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal

CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO

f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal

Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O

(please could you kindly mark my answer as brainliest)

If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).

This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.

In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.

To know more about equilibrium constant, refer here:

https://brainly.com/question/15118952#

#SPJ11

The standard reduction potential of the cathode half-reaction is -0.36V,

The standard reduction potential of the anode half-reaction is +0.34V,

and the standard potential of the cell is -0.02V.

The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):

Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.

The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):

Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:

E°cell = E°cathode - E°anode

= -0.36V - (+0.34V)

= -0.02V.

Learn more about the standard potential of the cell here:

https://brainly.com/question/19036092

#SPJ11

Answer:

To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).

Volume of water = 125 mL = 0.125 L

Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:

Molarity = number of moles / volume of solution

Molarity = 2.00 mol / 0.125 L

Molarity = 16.0 M

Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.

(Please could you kindly mark my answer as brainliest)

The electron transport chain (ETC) is an essential part of cellular respiration, which is a series of molecules that transfer electrons from one molecule to another used by cells to convert nutrients into energy.

This starts with the oxidation of molecules such as glucose, which releases electrons that are then transferred to a series of electron carriers in the ETC. The electron carriers are molecules that hold the electrons and can transfer them to other molecules which is known as redox reactions. As the electrons move through the ETC, they release energy which is used to form a proton gradient that is then used to drive the synthesis of ATP, the energy currency of the cell. The ETC is an essential part of cellular respiration as it is the process responsible for generating the energy necessary for cells to function.

To learn more about electron click here https://brainly.com/question/28977387

#SPJ4

The complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows: 2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq)

It is important to write the complete ionic equation when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed. The reaction of lithium sulfide with copper (II) nitrate is a double displacement reaction. Lithium sulfide reacts with copper (II) nitrate to form copper sulfide and lithium nitrate.

The balanced chemical equation for the reaction is given as follows:Li2S(aq) + Cu(NO3)2(aq) → CuS(s) + 2 LiNO3(aq)The complete ionic equation can be written by representing all the ions in the aqueous solutions as dissociated ions.

Thus, the complete ionic equation for the reaction that occurs when aqueous solutions of lithium sulfide and copper (II) nitrate are mixed is as follows:2 Li+(aq) + S2-(aq) + Cu2+(aq) + 2 NO3-(aq) → CuS(s) + 2 Li+(aq) + 2 NO3-(aq.

)In the above equation, the lithium and nitrate ions do not take part in the reaction and are present in the same form in the reactant and product side. Hence, they are called spectator ions.

To know more about ionic equation, refer here:

https://brainly.com/question/15138610#

#SPJ11

Answer:

This is due to the very slow wobble of the axis of Earth. Which change is most likely to occur because of the movement of the axis? Winter and summer months will reverse

Explanation:

hope its help you