If 2.18 g of sodium peroxide (Na2O2) react with water to produce sodium hydroxide abs oxygen, how many liters of oxygen will be produced at 17.7 Celsius abs 726 torr?

If 2.18 G Of Sodium Peroxide (Na2O2) React With Water To Produce Sodium Hydroxide Abs Oxygen, How Many

Answers

Answer 1

Answer:

0.350 L

Explanation:

2Na₂O₂ + 2H₂O → 4NaOH + O₂

First we convert 2.18 g of Na₂O₂ into moles, using its molar mass:

2.18 g ÷ 78 g/mol = 0.0279 mol Na₂O₂

Then we convert 0.0279 moles of Na₂O₂ into moles of O₂, using the stoichiometric coefficients of the reaction:

0.0279 mol Na₂O₂ * [tex]\frac{1molO_2}{2molNa_2O_2}[/tex] = 0.0140 mol O₂

Finally we use the PV=nRT formula to calculate the volume of oxygen produced:

P = 726 torrV = ?n = 0.0140 molR = 62.36 torr·L·mol⁻¹·K⁻¹T = 17.7 °C ⇒ 17.7 + 273.2 = 290.9 K

Inputting the data:

726 torr * V = 0.0140 mol * 62.36 torr·L·mol⁻¹·K⁻¹ * 290.9 KV = 0.350 L

Related Questions

The number of mol of oxygen in 2.5 mol of caffeine

Answers

Answer:

5.0molO

Explanation:

To find the moles of oxygen in 2.5 moles of caffeine, we will first research caffeine's molecular formula: C8H10N4O2. From the molecular formula, we can see there are 2 oxygen atoms in every 1 molecule of C8H10N4O2.We can therefore multiply by the following mole ratio to get the moles of oxygen.

2.5molC8H10N4O2×2molO/1molC8H10N4O2 = 5.0molO.

write Balance chemical reaction for preparation of chlorine with or without application heat

Answers

Answer:

2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)

Explanation:

Chlorine is a diatomic halogen gas known for its greenish-yellow colour. It has a pungent smell and is only moderately soluble in water.

It is a very reactive gas and is never found in free state in nature.

Chlorine can be prepared in the laboratory by oxidation of hydrochloric acid using KMnO4 as follows;

2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)

The set up does not need to be heated.

7.23 One equivalent of sodium methanethiolate is added to an electrophile that has two leaving groups. Which product will be major

Answers

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

A

Explanation:

We can see from the conditions of the reaction that the incoming nucleophile is -SCH3 and there are two possible leaving groups in the substrate.

First of all, we have to look at the conditions of the reaction. We can see that the reaction is taking place in DMF, a polar aprotoc solvent. This condition favours the SN2 synchronous mechanism over the SN1 ionic mechanism.

Hence, the nucleophile at the 1-position is preferentially substituted owing to the conditions of the reaction.

Thus, option A is the major product of the reaction.

A gas mixture is made by combining 8.7 g each of Ar, Ne, and an unknown diatomic gas. At STP, the mixture occupies a volume of 17.28 L. What is the molar mass of the unknown gas

Answers

Answer: Molar mass of the unknown gas is 73.153 g/mol.

Explanation:

Given: Mass of each gas = 8.7 g

Volume = 17.28 L

Let us assume that the molar mass of gas is m g/mol.

Molar mass of Ar is 40 g/mol and Ne is 20 g/mol.

Hence, total moles of each gas are as follows.

[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol[/tex]

At STP, the total volume of these gases is as follows.

[tex](\frac{8.7}{40} + \frac{8.7}{20} + \frac{8.7}{m}) mol \times 22.4 L = 17.28 L\\(\frac{8.7}{40} + \frac{8.7}{20})22.4 L + \frac{8.7}{m} \times 22.4 L = 17.28 L\\14.616 + \frac{8.7}{m} \times 22.4 L = 17.28 L\\\frac{8.7}{m} \times 22.4 L = (17.28 L - 14.616)\\\frac{8.7}{m} \times 22.4 L = 2.664 \\m = 73.153 g/mol[/tex]

Thus, we can conclude that molar mass of the unknown gas is 73.153 g/mol.

How many moles are contained in .984 molecules F2?

Answers

Answer:

1.6 x 10⁻²⁴ moles

Explanation:

We have 0.984 molecules of F₂. We know that 1 mol is equal to 6.022 x 10²³ molecules. Thus, we have a conversion factor: 1 mol/6.022 x 10²³ molecules

So, we multiply the molecules of F₂ by the conversion factor to calculate the moles:

0.984 molecules x  1 mol/6.022 x 10²³ molecules = 1.6 x 10⁻²⁴ moles

Which substrate is used in the last step of glycolysis

Answers

Pyruvate Kinase

Pyruvate Kinase performs a substrate level phosphorylation on ADP to generate an ATP and pyruvate, the final product of glycolysis.

PK dificiency is transmitted in an autosomal recessive disorder in which both alleles must contain the mutated gene, PK-LR.

Hope it helps you! \(^ᴥ^)/

Please help help please

Answers

Answer:  The correct answer is B.

Explanation:  Segregate most organic acids from oxidizing mineral acids. Keep oxidizers away from other chemicals, especially flammables.

Answer:

Segregate most organic acids from oxidizing mineral acids. Keep oxidizers away from other chemicals, especially flammables, combustibles, and toxic materials. Keep corrosives away from substances that they may react with and release corrosive, toxic, or flammable vapors.

define a fluid very sort answer ​

Answers

Answer:

A fluid is a medium that has a defined mass and volume, but no fixed shape, at a constant temperature and pressure. This may include gases, liquids, plasmas, and to some extent plastic solids. A fluid can flow and deform, preventing it from carrying loads in a static equilibrium.  A fluid is always compressible and internal frictional forces always occur due to the viscosity of the fluid.

Draw a Lewis structure for thiocyanic acid, HSCN, adding charges and lone electron pairs to the appropriate atoms.

Answers

Answer:

See explanation and image attached

Explanation:

Thiocyanic acid is made made up of hydrogen, sulphur, carbon and nitrogen atoms. Carbon is the central atom in the molecule.

The molecule has a total of sixteen valence electrons as shown in the image attached. There are no formal charges in the structure of the molecule as shown.

The molecule is linear in shape.

Which of the following elements is the largest in size
a. O
b. He
c. K
d. H

Answers

Answer:

C. K

i took this class before

Answer: The largest element is K

Explanation: As K has the largest radius among O,He and H

Consider the arrangement of gases shown below. If the value between the gases is opened and the temperature is held constant, determine the following.

Answers

Answer:

I don't know what to say . just for points

g Calculate the theoretical yield (in grams) of your product if you start with 0.50 grams of E-stilbene. The molecular weight of E-stilbene is 180.25 g/mol, and the molecular weight of the product is 340.058 g/mol. 0.5109 grams 0.9433 g 0.2342 g 0.6312 g

Answers

Answer:

0.9433g

Explanation:

Theoretical yield is defined as the mass produced assuming all reactant reacts producing the product.

Assuming the reaction is 1:1, we need to find the moles of E-stilbene (Reactant). If all reactant reacts, the moles of E-stilbene = Moles of product.

Using the molar mass of the product we can find the theoretical yield as follows:

Moles E-stilbene:

0.50g * (1mol/180.25g) = 0.00277 moles = Moles Product

Mass Product = Theoretical yield:

0.00277 moles * (340.058g/mol) = 0.9433g

compound of aspartame is a dipeptide that is often used as a sugar substitute which functional groups are present

Answers

Answer:

Carboxyl, primary amine, amide, ester, and phenyl.

Explanation:

The functional groups present in the compound of aspartame are carboxyl, primary amine, amide, ester, and phenyl. Aspartame is an artificial non-saccharide sweetener which is 200 times sweeter than sucrose. This aspartame is commonly used as a sugar substitute in many foods and beverages. It has the trade names such as NutraSweet, Equal, and Canderel.

Question 16(Multiple Choice Worth 5 points)

(04.01 LC) Which statement is true about the total mass of the reactants during a chemical change?

O It is destroyed during chemical reaction.
O It is less than the total mass of the products. O It is equal to the total mass of the products.
O It is greater than the total mass of the products.​

Answers

Answer:

It is equal to the total mass of the products.

Explanation:

Hope this helps :)

What is the volume of a gas 622.7 mL at 25.1 C if the temperature is increased to 60.7 C without changing the pressure, what is the new volume of the gas?
A. 697
B. 556
C. 1510
D. 9.35

Answers

Answer:

A) 697 mL

Explanation:

First convert degrees Celsius to Kelvin.

That gives;

For T1; temp 1 (273 + 25.1)

= 298.1K

T2; temp 2 (273+60.7)

=333.7K

From the formula, (V1/T1) = (V2/T2)

To find V2 = (V1/T1) × T2

= (622.7/298.1) × 333.7.

= 697.06mL

~~ 697mL

What is the volume of a flask containing 0.199mol of Cl2at a temperature of 313K and a pressure of 1.19atm

Answers

Answer:

43.0 L

Explanation:

Step 1: Given and required data

Moles of chlorine gas (n): 0.199 molTemperature (T): 313 KPressure (P): 1.19 atmIdeal gas constant (R): 0.0821 atm.L/mol.K

Step 2: Calculate the volume of the flask (V)

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L

The answer is 4.30 L

If mass of an empty 9.4 mL pycnometer is 10.3 and the mass of the same pycnometer with an unknown liquid is 20.1. Determine the density of the unknown liquid to the correct number of significant figures in g/mL

Answers

Answer:

1.04 g/mL

Explanation:

Applying,

D = (m-m')/V................. Equation 1

Where D = Density of the unknown liquid, m = mass of the pycnometer when filled with unkwon liquid, m' = mass of the empty pycnometer, V = volume of the empty pycnometer

From the question,

Assuming the mass are in grams

Given: m = 20.1 g, m' = 10.3 g, V = 9.4 mL

Substitute these values into equation 1

D = (20.1-10.3)/9.4

D = 9.8/9.4

D = 1.04 g/mL

What volume (mL) of the sweetened tea described in Example 1 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example

Answers

The question is incomplete, the complete question is:

What volume (mL) of the sweetened tea described in Example 3.14 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example. The example is attached below.

Answer: 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink

Explanation:

We first calculate the number of moles of soft drink in a volume of 10 mL

The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(1)

Taking the concentration of soft drink from the example be = 0.375 M

Volume of solution = 10 mL

Putting values in equation 1, we get:

[tex]0.375=\frac{\text{Moles of sugar in soft drink}\times 1000}{10}\\\\\text{Moles of sugar in soft drink}=\frac{0.375\times 10}{1000}=0.00375mol[/tex]

Calculating volume of sweetened tea:

Moles of sugar = 0.00375 mol

Molarity of sweetened tea = 0.05 M

Putting values in equation 1, we get:

[tex]0.05=\frac{0.00375\times 1000}{\text{Volume of sweetened tea}}\\\\\text{Volume of sweetened tea}=\frac{0.00375\times 1000}{0.05}=75mL[/tex]

Hence, 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink

Calculate the mass percent of carbon in the following molecule: Mn3[Mn(CO)4]3

Answers

Answer:

21.63 %

Explanation:

The molar mass of Mn₃[Mn(CO)₄]₃ is 665.64 g/mol.

Let's assume we have 1 mol of Mn₃[Mn(CO)₄]₃, if that were the case then we would have 665.64 grams.

There are 12 C moles per Mn₃[Mn(CO)₄]₃, with that in mind we calculate the weight of 12 C moles:

12 mol C * 12 g/mol = 144 g

Finally we calculate the mass percent of carbon:

144 g / 665.64 g * 100% = 21.63 %

One of the purposes of this lab is to determine the order of the reaction with respect to the Allura Red dye by creating first and second-order graphs for all four trials. The correct order of the reaction is the one where the slopes of the graphs for the four trials are roughly the same. Why is this important when choosing the order of the reaction

Answers

Answer: Hello the options related to your question are attached below

The slope is related to the rate constant so all four trials should have the same slope since the reactions are all the same ( Option C )

Explanation:

It is important when choosing the order of the reaction because the concentration of the bleaches used in the four trials are in excess hence their slopes have to be roughly the same and also because the reactions are similar and they where done at the same temperature, hence the slope of the first and second-order graphs will be the same.

What effect does hybridization have on chemical bond​

Answers

Effect of Hybridisation on Single, Double and Triple Bond Lengths of Carbon. Since the sp hybrid orbital contains more s-character (50%), it is closer to its nucleus; therefore, it forms shorter bonds. Because of the same reason sp2 hybrid orbital forms shorter bonds than sp3 hybrid orbitals.

Green plants use light from the Sun to drive photosynthesis, a chemical reaction in which liquid water and carbon dioxide gas form aqueous glucose (CH1206) and oxygen (O2) gas. Calculate the moles of glucose produced by the reaction of 2.40 mol of carbon dioxide. Be sure your answer has a unit symbol, if necessary, and round it to 3 significant digits.

Answers

Answer:

.

Explanation:

Calculate the average atomic mass for X

Answers

Answer:

39.0229 amu

Explanation:

Hello there!

In this case, according to given information, the idea here is to multiply the percent abundance by the mass number of each isotope and then add them all together as shown below:

[tex]=0.0967*38+0.7868*39+0.1134*40+0.0031*41\\\\=3.6746+30.6852+4.536+0.1271\\\\=39.0229amu[/tex]

Regards!

Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced. (You can edit both sides of the equation to balance it, if you need to.)

______________ → BaBr2 + H2O

Answers

Answer:

Ba(OH)₂ + 2 HBr ⇒ BaBr₂ + 2 H₂O

Explanation:

We have the products of a reaction and we have to predict the reactants. Since the products are binary salt and water, this must be a neutralization reaction. In neutralizations, acids react with bases. The acid that gives place to Br⁻ is HBr, while the base the gives place to Ba²⁺ is Ba(OH)₂. The balanced chemical equation is:

Ba(OH)₂ + 2 HBr ⇒ BaBr₂ + 2 H₂O

atomaticity of chlorine 1) 2, 2)1, 3) 32 , 4) 4.​

Answers

Answer:

ATOMICITY OF CHLORINE IS 2

Explanation:

Atomicity is defined as the total number of atoms present in a molecule.

What mass of NaOH would need to be dissolved in 500.0 mL of water to produce a solution with a pH of 12.40

Answers

Answer:

0.5024 g

Explanation:

Step 1: Calculate the concentration of H⁺

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -12.40 = 3.981 × 10⁻¹³ M

Step 2: Calculate the concentration of OH⁻

We will use the ionic product of water expression.

[H⁺] [OH⁻] = 10⁻¹⁴

[OH⁻] = 10⁻¹⁴/[H⁺] = 10⁻¹⁴/3.981 × 10⁻¹³ = 0.02512 M

Step 3: Calculate the initial concentration of NaOH

NaOH is a strong base and the molar ratio of NaOH to OH⁻is 1:1. Thus, the initial concentration of NaOH is 1/1 × 0.02512 M = 0.02512 M.

Step 4: Calculate the moles of NaOH

We will use the definition of molarity.

M = moles of NaOH/liters of solution

moles of NaOH = M × liters of solution

moles of NaOH = 0.02512 mol/L × 0.5000 L = 0.01256 mol

Step 5: Calculate the mass of 0.01256 moles of NaOH

The molar mass of NaOH is 40.00 g/mol.

0.01256 mol × 40.00 g/mol = 0.5024 g

What is the
energy
2) The energy transition from n = 1 →n= 3 in hydrogen is 12.09 eV (1.6022 X 10J= 1 eV)-
of light emitted from n = 3 →n=1?
E e fiz

Answers

Answer:

energy is the ability to do work

A sealed vessel initially contains 100 g of chlorine gas and 90 g of hydrogen gas. The two gases undergo reaction to form HCl. Which of the following statements is true?

a. 100 g HCl is produced
b. 190 g HCl is produced
c. less than 90 g HCl is produced
d. between 100 and 190 g of HCl is produced

Answers

Answer:

d.

Explanation:

H2 + Cl2 = 2HCL

From the equation 2g hydrogen combine with 71g of chlorine.

So 35.5 g Cl2 combines with 1g of H2

There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g hydrogen.

This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.

The true statement is that d. between 100 and 190 g of HCl is produced.

How do find the mass of HCL?

To find mass of HCL:

H2 + Cl2 = 2HCL

From the equation, 2g of hydrogen combines with 71g of chlorine.

So 35.5 g Cl2 combines with 1g of H2

There are 100g of Cl2 so this will, by proportion, react with 100/35.5 g of hydrogen.

This is 2.8 g hydrogen so the mass of HCl formed = 102.8 g.

Hydrogen chloride may be formed by the direct combination of chlorine (Cl2) gas and hydrogen (H2) gas.

Learn more about Hydrogen chloride here: brainly.com/question/20323511

#SPJ2

ELECTROLYSIS OF MOLTEN NaCl IS DONE IN A DOWNS CELL OPERATING AT 7.0 VOLTS AND 4.0X10^4A. HOW MUCH Na(s) AND Cl2(g) CAN BE PRODUCED IN 8 HOURS IN SUCH A CELL?

Answers

Answer:

Mass of sodium produced = 2.74 × 10⁵ g of Na

Mass of chlorine produce = 4.24 × 10⁵ g of Cl₂

Explanation:

In the electrolysis of molten NaCl as described above, the quantity of charge used is given by the formula, Q = I × t

Where I isnthe current passed in amperes and t is time in seconds.

Q = 4.0 × 10⁴ A × (8 × 60 × 60) s = 1.152 × 10⁹ C

Equation for the discharge of sodium is; Na+ + e- ---> Na (s)

One mole of electrons is required to discharge one mole of Na

One mole of electron = 1 faraday = 96500 C

One mole of Na has a mass of 23 g

96500 C produces 23 g of Na

1.152 × 10⁹ C will produce 23 g × 1.152 × 10⁹ C / 96500 C = 2.74 × 10⁵ g of Na

Equation for the discharge of chlorine gas is; 2 Cl- ---> Cl₂(g) + 2e-

Two mole of electrons are required to discharge one mole of chlorine gas

Two moles of electron = 2 faraday = 2 × 96500 C = 193000

One mole of Cl₂ has a mass of 71 g

193000 C produces 71 g of Cl₂

1.152 × 10⁹ C will produce 71 g × 1.152 × 10⁹ C / 193000 C = 4.24 × 10⁵ g of Cl₂

The amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

Current passed through the cell = [tex]4.0\times10^4 A[/tex]

Time = 8 Hours

We have to calculate the amount of Na and [tex]Cl_2[/tex] produced in 8 hours in the downs cell.

What is a down cell?

The Downs process is an electrochemical method for the commercial preparation of metallic sodium, in which molten NaCl is electrolyzed in a special apparatus called the Downs cell.

The total charge passed through the cell is calculated by the given formula as

Charge(Q) = Current(I) × time(t)

Q = [tex]4.0\times10^4 A \times t[/tex]

[tex]t = 8 \times 60\times 60[/tex] sec

t = 28800 sec

Q = [tex]4.0\times10^4 A \times 28800[/tex] sec

Q = [tex]115200\times 10^4 A\ sec[/tex]

We know that, Ampere = Coulombs per sec

Q = [tex]115200\times 10^4\ C[/tex]

1 mol of electrons  96500 C charge

Therefore, the number of mols of electrons carries this [tex]115200\times 10^4\ C[/tex] charge = [tex]\frac{115200\times10^4}{96500}[/tex] = 1.1937 × 10⁴ = 11937 mol electrons

In the Down's cell

Half cell reactions are:

Reduction half-reaction: [tex]2Na^+(aq)+2e^- \to 2Na(s)[/tex]

Oxidation half-reaction: [tex]2Cl^-(aq)\to Cl_2(g) + 2e^-[/tex]

We know that no. of moles = [tex]\frac{given \ mass}{molar \ mass}[/tex]

Molar mass of Na = 23 g/mol

The mass of Na formed = 11937 mol × 23 g/mol = 274551 grams

The molar mass of Cl₂ = 71 g/mol

The mass of Cl₂ = [tex]\frac{11937}{2}\times 71 = 423763.5 \ grams[/tex]

Hence, the amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

To learn more about electrochemistry, click here:

https://brainly.com/question/13891856

There are four containers: a 100-mL beaker, 250-mL Erlenmeyer flask, a 500-mL beaker, and a 1-L Florence flask. They contain coffee, tea, water, and milk, although not in that order. Use the following facts to identify the beverage in each container.

a. the 500-mL container has a beverage commonly associated with breakfast.
b. the largest container has a colorless liquid (i.e. neither yellow nor orange).
c. the beverage in the smallest container is opaque. (you cannot see through it).
d. One clear liquid is in a container half the volume of a colored liquid.
e. The only combustible liquid has exactly twice the volume of an opaque liquid.

Answers

Answer:

There are four containers: a 100-mL beaker, 250-mL Erlenmeyer flask, a 500-mL beaker, and a 1-L Florence flask. They contain coffee, tea, water, and milk, although not in that order. Use the following facts to identify the beverage in each container.

a. the 500-mL container has a beverage commonly associated with breakfast.

b. the largest container has a colorless liquid (i.e. neither yellow nor orange).

c. the beverage in the smallest container is opaque. (you cannot see through it).

d. One clear liquid is in a container half the volume of a colored liquid.

e. The only combustible liquid has exactly twice the volume of an opaque liquid.

Explanation:

a. The 500-mL container has a beverage commonly associated with breakfast is coffee.

b. The largest container has a colorless liquid (i.e. neither yellow nor orange) water.

c. The beverage in the smallest container is opaque. (you cannot see through it) milk.

d. One clear liquid is in a container half the volume of a colored liquid tea.

The 500-mL container has a beverage commonly associated with breakfast is coffee. (rest answers are as follows)

How to indentify beverages ?

The Indentification of the beverages can be done by knowing the content and optical activity that uniquely identify the container.

The 500-mL container has a beverage commonly associated with breakfast is coffee.The largest container has a colorless liquid (i.e. neither yellow nor orange) water.The beverage in the smallest container is opaque. (you cannot see through it) milk.One clear liquid is in a container half the volume of a colored liquid tea.

Learn more about optical activity here ;

https://brainly.com/question/15892094

#SPJ5

Other Questions
Devaughn is 6 years older than Sydney. The sum of their ages is 56 . What is Sydney's age? Madame Leblanc est...... d'Hlne.la mrele professeur please help me can someone explain me this South Tropical weather prime factorization of 44231 give the serious answer Which set of equations is enough information to prove that lines c and d are parallel lines cut by transversal p? Based on the reaction below: [tex]N_2 + 3H_2[/tex] [tex]2NH_3 + heat[/tex]If we decrease the temperature, equilibrium will shift towards the...Please explain! which type of place is rich in biodiversity? BRAINLIEST for first correct answer! PLS HELP MEEEEE ASAP PLS!!! Can someone do #2? whats the volume the triangular prism? Which statement best explains the social contract theory? Strong leaders do the best job of ruling a country of diverse people. Countries are best served when their citizens take an active role in government. Leaders must maintain the rights of citizens even if it interferes with the interest of the country. People must submit their individual wills to the collective will to form a society. A forest has 800 pine trees, but a disease is introduced that kills a fourth of the pine trees in the forestevery year.Which graph shows the number y of pine trees remaining in the forest 2 years after the disease isintroduced?In a graph Calculate the no. of moles in 15g of CaCl2 Who's H.H. Holmes?Was he a serial killer?.... can anyone answer this? plans and policies of the of government make huge difference in health population. justify this statement ? Please help with this qns Who came first in the cross-country race ? A square has an area of 100 m squared. What is the length of each side? where is kalsubai peak????????