Answer:
0.75mol/LNaOH
Explanation:
Data: Soln:
M= ? M= n/ V(l)
n= 3moles. M= 3mol/ 4L
V= 4L. M = 0.75 mol/LNaOH
Boyle's Law states that when a sample of gas is compressed at a constant temperature, the pressure P and volume V satisfy the equation PV = C, where C is a constant. Suppose that at a certain instant the volume is 300 cm3, the pressure is 180 kPa, and the pressure is increasing at a rate of 30 kPa/min. At what rate is the volume decreasing at this instant?
Answer:
The gas is decreasing at a rate of 50 cubic centimeters per minute.
Explanation:
The Boyle's Law is represented by the following expression:
[tex]P\cdot V = k[/tex] (1)
Where:
[tex]P[/tex] - Pressure, in kilopascals.
[tex]V[/tex] - Volume, in cubic centimeters.
[tex]k[/tex] - Proportionality constant, in kilopascal-cubic centimeters.
By definitions of rate of change and implicit differentiation, we derive the following differential equation:
[tex]\dot P \cdot V + P\cdot \dot V = 0[/tex] (2)
Where:
[tex]\dot P[/tex] - Rate of change of the pressure, in kilopascals per minute.
[tex]\dot V[/tex] - Rate of change of the volume, in cubic centimeters per minute.
Then, we clear the rate of change of the volume within (2):
[tex]P\cdot \dot V = -\dot P\cdot V[/tex]
[tex]\dot V = -\left(\frac{\dot P}{P} \right) \cdot V[/tex]
If we know that [tex]P = 180\,kPa[/tex], [tex]\dot P = 30\,\frac{kPa}{min}[/tex] and [tex]V = 300\,cm^{3}[/tex], then the rate of change of the volume is:
[tex]\dot V = -\left(\frac{\dot P}{P} \right) \cdot V[/tex]
[tex]\dot V = -50\,\frac{cm^{3}}{min}[/tex]
The gas is decreasing at a rate of 50 cubic centimeters per minute.
If energy cannot be created or destroyed, what happens to the kinetic and potential energy?
Answer:
According to the law of conservation of energy, energy cannot be created or destroyed, although it can be changed from one form to another. KE + PE = constant. ... As the car coasts down the hill, it moves faster and so it's kinetic energy increases and it's potential energy decreases. hope this helps
Explanation:
Answer:
They cannot be destroyed or created however,
Explanation:
it can only be transformed or transferred from one form to another.
Predict the product of this reaction
Al(s) + N2(g)—->
HELP ASAP WHATS THE DEFINITION I NEED JT NKW
Answer:
1.Summer solstice 2.seasons 3. winter solstice 4. Equinox
Explanation:
I hope it helps!
Have a great day!
During a dry compression test, the first puff of the test shows 50 PSI and the maximum reading after 4 strokes is 150 PSI. This indicates A. that the cylinders are good. B. weak piston rings. C. a bad spark plug. D. a hole in the piston.
One of the basic engine-diagnostic procedures that can be run is an engine compression test. All of the cylinders must have the same compression for the engine to run smoothly. There are just three possible ways for air to leak out of an engine and cause compression loss.
Exhaust or intake valve Engine rings (or piston, if there is a hole) An engine's head gasketThe procedures for conducting a compression testThe engine should be warmed to its typical operating temperature before testing in order to achieve the best results. The following procedures should be followed for an accurate compression test:
STEP 1: Dispose of each spark plug. As a result, the engine can be turned up to the same speed. Label all spark plug wires accurately.STEP 2 is to block the throttle open. This enables the engine to pull in the most air possible. Additionally, this step guarantees reliable compression test results.STEP 3 After inserting a compression gauge into a spark plug hole, start the engine. Four compression strokes of engine cranking should be performed in total. A puffing sound is produced after each compression stroke.EXAMPLE-If the ultimate, maximum value is 150 PSI, for instance, the reading following the first puff should be greater than 75 PSI. Low first-puff readings could be a sign of weak piston rings.STEP 4 Keep track of the highest readings, then compare the outcomes.Learn more about compression test here https://brainly.com/question/13274092
#SPJ2
Which rank was NOT included in Linnaeus' taxonomy?
Kingdom
Family
Domain
Order
Answer:
Domain
Explanation:
This is because Linnaeus taxonomy is a system of classification which was invented by a swedish Botanist called Carl Linnaeus and it is refered to hierarchy of grouping organisms called taxa. It involve 7 system of classifications and they include Kingdom, Phylum, Class, Order, Family, Genus, and Species.
Which compound is the conjugate base in the following reaction :H2SO4 + H2O —> HSO4 + H30+
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: HSO4-
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Uranium, an important component of both nuclear weapons and nuclearreactors, has two major isotopes, U-238, which has a half-life of approximately billion years, and U-235, which has a half-life of approximately million years. Both were present in equal amounts at the time of thecreation of the Earth, billion years ago. How many years after the creationof the Earth had the amount of radiation from uranium decayed to half theamount present at the time of the creation of the Earth
Answer:
Hello your question is poorly written below is the well written question
Uranium, an important component of both nuclear weapons and nuclear reactors, has two major isotopes, U-238, which has a half-life of approximately 4.5 billion years, and U-235, which has a half-life of approximately 700 million years. Both were present in equal amounts at the time of the creation of the Earth, 4.5 billion years ago. How many years after the creation of the Earth had the amount of radiation from uranium decayed to half the amount present at the time of the creation of the Earth
Answer : 140 billion years
Explanation:
Given that :
U-238 h1/2 = 4.5 billion years
U-235 h1/2 = 700 million years
At the beginning both Isotopes where present in equal amount
Determine the T years before the amount of Uranium decays to Half
T = ? N'2 = N1 / 2
we know that N = No ( 1/2 )^h where h = time / half-life time
attached below is the detailed solution of the given problem
What is the function of white blood cells?
A) immunity
b) carry nutrients, waste
C) blood clotting
Answer:
A
Explanation:
They help fight infection and other disease
Answer:
immunity is the answer for this question
Choose the best answer
1. Gas A diffuses twice as fast as another gas B. If the density of the gas A is 2, the molecular mass of
(a)2
(b) 4
(c) 8
(d) 16
i think it is
(b) 4
:) hope its correct :)
what does pen mean?.
Answer:
P = protons
E = electrons
N = neutrons
remember protons and neutrons (protons are positive and neutrons are neutral as you can already tell by their names) are found at the centre of the nucleus (positive mass). Whilst the electrons (negative) orbit around the shells
What is thePercent composition of dichlorine heptoxide?
Answer:
The percent composition of dichlorine heptoxide is 38.76% CI and 61.24% O
Answer:
38.76%cl and 61.24%o
Explanation:
the percent composition of dichlorine heptoxide is 38.76%Cl and 61.24%O
when are igneous rocks formed?
A. When layers of mud form inside Earth
B. When layers of mud are compressed
C. When melted rock solidifies
D. When solid rock melts
Answer:
C. When melted rock solidifies.
Consider the fatty acid. A carboxylate salt is attached to a 19 carbon chain, where double bonds are present between carbons 5 and 6, between carbons 8 and 9, between carbons 11 and 12, and between 14 and 15. The carboxylate carbon is carbon 1. All double bonds are cis. Which of the designations are accurate for the fatty acid
Answer:
ω-3 fatty acid and 19:4(Δ5,8,11,14)
Explanation:
From the image attached below:
We can see the structure of the delta nomenclature showing the numbers of carbons, numbers of double bonds, and the locations of the double bonds in the structure of the carboxylate salt.
Also, we can see the structure of the fatty acid where; the location of the first double bond from the methyl end is shown.
Hence, the designation which are accurate for these structures are:
ω-3 fatty acid and 19:4(Δ5,8,11,14)
At which point in its swing does the pendulum have the least gravitational potential energy
Answer:
a
Explanation:
a
When an atom is changed into an ion, the is changed
number of protons
b. number of neutrons
number of electrons
d. mass number
Answer:
the number of electrons will end up changing
You have three containers each of which is connected to a fourth empty container. Three of the containers contain pure gases. In the first container oxygen is at 2 atm, nitrogen at 4 atm is in the second container, and argon at 1 atm is in the third. When you open the valve and mix the gases in the forth container, what is the pressure, PT, in the forth container
Answer: The total pressure is 7 atm
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_A+p_B+p_C...[/tex]
Given : [tex]p_{total}[/tex] =total pressure of gases = ?
[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2 atm
[tex]p_{N_2}[/tex] = partial pressure of nitrogen = 4 atm
[tex]p_{Ar}[/tex] = partial pressure of argon = 1 atm
putting in the values we get:
[tex]p_{total}=2atm+4atm+1atm[/tex]
[tex]p_{total}=7atm[/tex]
Thus the total pressure is 7 atm
how proved that carbon is present in sugar?
In all living organisms, in substances like carbohydrate, starch, urea etc. To prove sugar contains carbon, take a little amount of sugar in spoon and heat it gently till it melts and turned into yellowish color. On further heating it changes into brown colored mass and then black, which is charcoal.
Answer: sugar treated with strong sulphur acid turns to black
Explanation: sulphur acid removes water from sugars and carbon is left in residue.
This should not to try at home. Water boils when high temperature is achieved.
Also smell of burned sugar occurs
Rank the following compounds in order of increasing solubility in water. Items (4 items) (Drag and drop into the appropriate area) No more items Items in order most soluble CaO BaO KCI KI
I have tried CaO> BaO > KCl > KI, this is incorrect.
Answer:
CaO < BaO < KCl <KI
Explanation:
Let us remember that the solubility of an ionic substance in water depends on the magnitude of the lattice energy and the hydration energy. If the hydration energy is equal to or is greater than the lattice energy, the substance dissolves in water.
However, the lattice energy depends on the size of the ions. The smaller the ions in the ionic compound, the higher the lattice energy and the lesser the solubility of the ionic compound.
KI has the least lattice energy and the highest solubility in water while CaO has the highest lattice energy and the least solubility in water.
can u identify a chemical equation for the saponification of olive oil as per your experiment?
I
What is a hot spot? Must be in your own words ( please hurry)
Answer:
It depends. what hot spot are you looking for?
Answer:
A hot spot is an area on Earth over a mantle plume or an area under the rocky outer layer of Earth, called the crust, where magma is hotter than surrounding magma. The magma plume causes melting and thinning of the rocky crust and widespread volcanic activity.
Explanation:
Hope this is what you mean be hot spot!
I hope this helps you!
What is the pressure inside a balloon that contains 10.0 g of helium at 25.0°C when the helium occupies a volume of 56.0 L?
A 10.9 atm
B 0.916 atm
C 11.1 atm
D 1.09 atm
Explanation is in the file
tinyurl.com/wpazsebu
In order to determine the answer to a chemistry problem, a student first converted the given percentages to mole by assuming the sample size was 100 grams. Then the student divide by the smallest mole amount of the elements present. Finally the student used the ratios to write a formula. Which of the following best describes the problem the student likely solved?
a. Determined percent composition
b. None of the above
c. Determining molecular formula
d. Determining empirical formula
Answer: d. Determining empirical formula
Explanation:
Molecular formula is the chemical formula which depicts the actual number of atoms of each element present in the compound.
Empirical formula is the simplest chemical formula which depicts the whole number of atoms of each element present in the compound.
Step 1: If percentage are given then we are taking total mass is 100 grams. So, the mass of each element is equal to the percentage given.
Step 2 : convert given masses into moles
Step 3 : For the mole ratio, divide each value of moles by the smallest number of moles calculated
Step 4: The mole ratio gives the empirical formula of the compund.
Ethanol in the body is oxidized to acetaldehyde by liver alcohol dehydrogenase (LADH). Other alcohols are also oxidized by LADH. For example, methanol, which is mildly intoxicating, is oxidized by LADH to the quite toxic product of formaldehyde. The toxic effects of ingesting methanol (a component of many commercial solvents) can be reduced by administering ethanol. The ethanol acts as a competitive inhibitor of methanol by displacing it from LADH. This provides sufficient time for the methanol to be harmlessly excreted by the kidneys. If an individual has ingested 30 mL of methanol (a lethal dose), how much 100 proof whiskey (50% ethanol by volume) must be imbibed to reduce the activity of her LADH towards methanol to 5% of its original value? The adult human body contains ~40L of aqueous fluids throughout which ingested alcohols are rapidly and uniformly mixed. The densities of ethanol and methanol are both 0.79 g/cm3. Assume the KM values of LADH for ethanol and methanol to be 10-3 M and 10-2 M, respectively, and that Ki = KM for ethanol
Answer: The changes are the mL of methanol ingestion (30mL) and the proof of the whiskey (40% ethanol; 80 proof), and the percentage of reduction (1%). I applied the formulas from the last post in reference to this question but am completely lost. The formulas used last time were: 2. Formulas Applied alpha=1 + ([etOH]/KetOH) (V[meOH]/V[etOH])= (Vmax*[meOH]/KmeOH+[meOH])/(Vmax*[meOH]/alpha*KmeOH+[meOH]) which reduces to (V[meOH]/V[etOH])=(alpha*KmeOH+[meOH])/(KmeOH+[meOH]) 3. My attempt Molarity of methanol: 30mL; which equates to 23.7g of methanol; in 40L that is equal to 0.5925 g/L Dividing the molecular weight by 32.04g/mol I get 0.0184925 which is approximately 0.02M; Km is 0.01M Since the molar mass of methanol and ethanol are two fold, I can multiply the g/l by 4. However, unlike the previous problem, I cannot multiply by 2 because I do not have 50% EtOH, so because 40 is less than 50 I assume to multiply by 2.5 yielding: (30mL)(4)(2.5)=300mL 300mL of EtOH to effectively reduce the Methanol to 1%.
What is 2AI(s) + FeO3(s) = Ai2O3(s) + 2Fe(s)
Answer:
it's a double displacement Reaction.
Please help I have no idea where to start
Answer:
Download Ptable, it will show all of the elements, and you can click on them, and it will show all the information you need about them!
Explanation:
I hope this helps!!!!!
When one gram of liquid water at its boiling point is changed into water vapor
1.
334 J/g is gained from the surrounding environment
2.
334 J/g is released into the surrounding environment
3
2260 J/g is gained from the surrounding environment
4
2260 J/g is released into the surrounding environment
Answer: 2260 J/g is gained from the surrounding environment
When one gram of liquid water at its boiling point is changed into water vapor, 2260 J/g of energy is gained from the surrounding environment.
What is heat of vaporization?Heat of vaporization is the amount of heat that is required by any body during their transition process from liquid state to vapor state, at a particular temperature i.e. no change in temperature during whole process.
During the transition of one gram of liquid water into water vapor at its boiling point of 100°C, 2260 J/g energy is absorbed by the water for the formation of vapor.
Hence, option (3) is correct.
To know more about heat of vaporization, visit the below link:
https://brainly.com/question/26306578
2C2H2 + 502 = 4CO2 + 2H20
when 20000g of 2C2H2 + 5O2 = how much 4CO2?
Answer:
6.761 × 10⁴ g
Explanation:
Step 1: Write the balanced combustion reaction
2 C₂H₂ + 5 O₂ ⇒ 4 CO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 20000 g of C₂H₂
The molar mass of C₂H₂ is 26.038 g/mol.
20000 g × 1 mol/26.038 g = 768.11 mol
Step 3: Calculate the moles of CO₂ produced from 768.11 moles of C₂H₂
The molar ratio of C₂H₂ to CO₂ is 2:4.
768.11 mol C₂H₂ × 4 mol CO₂/2 mol C₂H₂ = 1536.2 mol CO₂
Step 4: Calculate the mass corresponding to 1536.2 moles of CO₂
The molar mass of CO₂ is 44.01 g/mol.
1536.2 mol × 44.01 g/mol = 6.761 × 10⁴ g
help people i really need this
1L = 1000 mL
Molarity (M) = moles of solute / L of solution
Calculate the moles of NaCl required to prepare 250 mL of 1.5 M aqueous solution.
Answer:· 44 g NaCl Explanation: The problem provides you with the molarity and volume of the target
Explanation:
