if a bottle of vinegar has 4.78g of acetic acid (CH3COOH) per 100.0 g of solution (mixed with water, what is the molarity of the vinegar? Density of the solution is 1.00g/mL.

Explanation:

Saturated fats are defined as the fat where fatty acid chains contain only single bonds.

For example, stearic acid, palmitic acid etc.

Unsaturated fats are defined as the fat where fatty acids contain one or more number of double bonds on the carbon atoms.

For example, oleic acid, palmitoleic acid etc.

Answer:

The correct answer is - no not adhere to the law of mass conservation.

Explanation:

According to the law of mass conservation in an isolated system, the mass can not be created or destroyed and in a chemical or physical change, the mass of products should be always equal to the mass of reactants.

On the basis of the law the mass of the chemical reaction-

Mass of products = mass of reactants

33 g of methane + 289g of oxygen = 189g of carbon dioxide + 30g of water

322g ≠ 219 g

which means this reaction does not adhere to the law of conservation.

Answer:

1 ) Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Explanation:

1) To show that heat flows spontaneously from high temperature to low temperature

example :

Pick two(2) solid metal blocks with varying temperatures ( i.e. one solid block is hot and the other solid block is cold )

Place both blocks for time (t ) in an insulated system to reduce heat loss or gain to or from the environment

Check the temperature of both blocks after time ( t ) it will be observed that both blocks will have same temperature after time t ( first law of thermodynamics )

Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) Entropy change for Decomposition of mercuric oxide

2HgO (s) → 2Hg(l) + O₂ (g)

Δs = positive

there is transition from solid to liquid and the melting point of mercury ( the point at which reaction will take place ) = 500⁰C

hence ΔSdecomposition = S⁻ Hg  -  S⁻ HgO =

Δh of reaction = 181.6 KJ

Temp = 500 + 273 = 773 k

hence ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Answer:

True

Explanation:

The length of covalent bond depends upon the size of atoms and the bond order.

Answer:

The best existing methods of control—artemisinin-based drug treatment and insect control with chemical sprays and treated bednets—can reduce the burden of disease substantially, and can even eliminate the disease in some regions,

hope this will help you more

Saturated fatty acids lack double bonds between the individual carbon atoms, while in unsaturated fatty acids there is at least one double bond in the fatty acid chain. Saturated fats tend to be solid at room temperature and from animal sources, while unsaturated fats are usually liquid and from plant sources.

Answer:

hope it is helpful to you

☆☆☆☆☆☆☆☆☆

Answer:

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

Explanation:

The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.

Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

answer; 1/ 20_2[2-] +2e - ->0.

Answer:

the result for the following are (a) P is directly proportional to n

(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V

Answer:

19000 torr

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 0.150 L

Initial pressure (P₁) = 1520 torr

Final volume (V₂) = 0.012 L

Temperature = constant

Final pressure (P₂) =?

The final pressure of the gas can be obtained by using the Boyle's law equation as illustrated below:

P₁V₁ = P₂V₂

1520 × 0.150 = P₂ × 0.012

228 = P₂ × 0.012

Divide both side by 0.012

P₂ = 228 / 0.012

P₂ = 19000 torr

Thus, the final pressure of the gas is 19000 torr

Answer:

n = 2.23 moles

Explanation:

Given the following data;

Standard temperature = 273 K

Standard pressure = 101.325 kPa

Volume = 50 liter

R = 8.314 J/mol·K  

To find the number of moles, we would use the ideal gas law formula;

PV = nRT

Where;

Making n the subject of formula, we have;

[tex] n = \frac {PV}{RT} [/tex]

Substituting into the formula, we have;

[tex] n = \frac {101.325*50}{8.314*273} [/tex]

[tex] n = \frac {5066.25}{2269.722} [/tex]

n = 2.23 moles

Therefore, 2.23 moles of carbon dioxide at STP will fit in a 50 liter container.

Answer:

1.30 m

Explanation:

First we calculate the number of moles of solute in the solution, using the definition of molarity:

Then we calculate the mass of solvent, using the given volume and density:

Now we calculate the molality of the solution:

Answer:

Scientific method.

Explanation:

Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.

Explanation:

In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!

[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]

So, there are 3.8mol Cl

Acids have sour taste, low pH and dissolves metals.

The list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

An acid is a chemical substance that has the ability to donate hydrogen ions when involved in a chemical reaction.

The following are the characteristics or features of an acid:

Therefore, the list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

Learn more about acids here:

https://brainly.com/question/1302816

This question is incomplete, the complete question is;

A certain liquid X has a normal boiling point of 150.4 °C and a molar boiling point elevation constant kb is 0.60 °Ckgmol⁻¹.

A solution is prepared by dissolving some urea (NH22CO) in 750 g of X. This solution boils at 150.9 °C . Calculate the mass of urea that was dissolved. Round your answer to 3 significant digits.

Answer:

the mass of urea that was dissolved is 37.5 g

Explanation:

Given the data in the question;

normal boiling point of X; Tb⁰ = 150.4 °C

boiling point of solution Tb = 150.9 °C

Change in boiling point Δt = Tb - Tb⁰  = 150.9 °C - 150.4 °C = 0.5 °C

Kb = 0.6 °C.kg.mol⁻¹

V = 750 g

Now, we know that

Δt = Kb × molality

so

0.5 = 0.6 × molality

molality = 0.5 / 0.6

molality = 0.833

we know that molar mass of urea is 60 g/mol

so

molality = mass × 1000 / molar mass × volume( g )

we substitute

0.833 = ( mass × 1000 ) / ( 60 × 750 )

0.833 = ( mass × 1000 ) / 45000

0.833 × 45000 = mass × 1000

mass = ( 0.833 × 45000 ) / 1000

mass = 37485 / 1000

mass = 37.485 ≈ 37.5 g   { 3 significance figure }

Therefore, the mass of urea that was dissolved is 37.5 g

Answer:

Identify a process that is NOT reversible.

Melting of snow

baking of bread

deposition of carbon dioxide

freezing water

melting of aluminum

Explanation:

A physical change is the one in which there is a change only in its physical state, color, the appearance of the substance. But the chemical composition of the substance remains unchanged.

It is a temporary change and can be reversed easily.

For example:

melting, freezing, deposition etc.

Baking is a permanent change and the chemical composition of the substance changes.

Hence, among the given options, baking of bread is not a reversible change.

Out of the following all are physical changes except baking of bread and physical changes are reversible so the process  which is not reversible is baking of bread.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ5

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

Electronegativity can be defined as the tendency of an atom to gain or attract an electron. The electronegativity has been dependent on the size of the atom, as well as the atomic number and valence electrons.

The atom with the requirement of a less number of atoms to complete its octet can easily gain the electron and thereby have high electronegativity. The atomic size also plays a role in the electronegativity of the atom.

The atom with a bigger size has the lesser force of attraction from the nucleus and thus has difficulty attracting the electron, however, the smaller size atom can easily attract the electron with the attraction force from the nucleus.

Thus, the elements with smaller sizes and a high number of valence electrons are more electronegative. In the periodic table, on moving from left to right the valence electrons increase, thus the electronegativity increases.

On moving down the group, the element size increase, thus the electronegativity decreases down the group.

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

For more information about electronegativity, refer to the link:

https://brainly.com/question/2060520

Answer:

Theoretical yield is 138.4 g

Explanation:

In the first step we determine the reaction:

3Mg + N₂ → Mg₃N₂

Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:

100 g . 1mol/ 24.3g = 4.11 moles of Mg.

Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride

Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂

We convert mass to moles, to find the theoretical yield:

1.37 mol . 100.9 g/mol = 138.2 g

Answer:

indicates the number of subshells

The question is incomplete, the complete question is:

A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.

Answer: The number of moles of solid iodine produced is 0.0327 moles

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of solid iodine = 8.31 g

Molar mass of solid iodine = 253.8089 g/mol

Plugging values in equation 1:

[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]

Hence, the number of moles of solid iodine produced is 0.0327 moles

Answer:

all light waves can be described in terms of their speed, frequency and wavelength

Explanation:

Hope it helps u.....

Sodium metal reacts rapidly with water to form a solution of sodium hydroxide (NaOH) and hydrogen gas (H2). This reaction is exothermic.

Equation:

2Na + 2H²0 --------}- 2NaOH + H²

Answer:

qualatatiev is fs-hj_jakakak

Answer:

For (1): The correct option is (a)

For (2): The correct option is (a) and 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts.

Explanation:

There are 2 types of reactions that are classified based on enthalpy change:

Endothermic reactions: These are the reactions where heat is absorbed by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is positive for these reactions.

Exothermic reactions: These are the reactions where heat is released by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is negative for these reactions.

For the given chemical reaction:

[tex]2NH_3(g)\rightarrow N_2(g)+3H_2(g);Delta H=160kJ[/tex]

As the change in enthalpy or heat of the reaction is positive. Thus, the reaction is an endothermic reaction because heat is absorbed by the reaction.

When ammonia reacts, some amount of heat will be absorbed by the reaction. Thus, we can say the heat will be absorbed.

The number of moles is calculated by using the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of ammonia = 70.9 g

Molar mass of ammonia = 17 g/mol

Using equation 1:

[tex]\text{Moles of ammonia}=\frac{70.9g}{17g/mol}=4.17mol[/tex]

By stoichiometry of the reaction:

If 2 mole of ammonia reacts, the heat absorbed is 160 kJ

So, if 4.17 moles of ammonia reacts, the heat absorbed will be = [tex]\frac{160kJ}{2mol}\times 4.17mol=333.6kJ[/tex]

Hence, 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts

The question is incomplete, the complete question is;

What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime

Answer:

imine

Explanation:

An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.

Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.

Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine

Answer:

Close to the calculated endpoint of a titration - Partially open

At the beginning of a titration - Completely open

Filling the buret with titrant - Completely closed

Conditioning the buret with the titrant - Completely closed

Explanation:

'Titration' is depicted as the process under which the concentration of some substances in a solution is determined by adding measured amounts of some other substance until a rection is displayed to be complete.

As per the question, the stopcock would remain completely open when the process of titration starts. After the buret is successfully placed, the titrant is carefully put through the buret in the stopcock which is entirely closed. Thereafter, when the titrant and the buret are conditioned, the stopcock must remain closed for correct results. Then, when the process is near the estimated end-point and the solution begins to turn its color, the stopcock would be slightly open before the reading of the endpoint for adding the drops of titrant for final observation.

Answer: the molecular formula of  trioxide is ClOClO3 or Cl2O4

hope its helps you.

keep smiling be happy stay safe

Answer:

3 > 2> 1

Explanation:

Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.

Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.

Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.

If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.