Answer:
The ping will change.
Explanation:
Assuming you mean ping from device with SIM card to another host (no mater what host), the ping will change. Ping changes even on the same device because network speed and performance of all the nodes on the route changes continuously. However, if two of your devices (phone & router) are configured differently (use different routing under the hood), then it will also affect the ping.
Type the correct answer in the box. Spell all words correctly.
Which testing requires coding the test cases into a scripting language?
testing requires coding the test cases into a scripting language.
Answer:
sorry I forgot it
Explanation:
because I am now in a last position
explain the working principle of computer? can anyone tell
Answer:
input process and output hehe
If you are to enhance the ICT used by your teachers, how will ypu do it? Will you use the same ICT or will you modify how it was integrated?
To enhance the ICT (Information Communication Technology) used by teachers, I will modify how the ICT was integrated.
The modification of how ICT is integrated will change the culture that places teaching over technology. Then, teachers will be taught how to use ICT to:
improve learning so that teachers become learning facilitatorsmotivate learners by fostering learning autonomy, making students less dependent on the teacherengage the learners by creating collaborative learningdiminish content learning so that students learn to think, create, and communicate effectivelymake learning a lifetime culture enhance the learning environment so that teachers become collaborators and co-learners with students.Thus, I will enhance the ICT used by teachers by modifying its integration to achieve better results for both teachers and learners.
Learn more about the importance of ICT here: https://brainly.com/question/13724249
How to prepare and draw a corresponding flowchart to compute the sum and product of all prime numbers between 1 and 50
Answer:
Create boxes with the following content
Initialize sum to 0, product to 1 and number to 1Check if number is a prime. If yes, update sum += number and product *= numberIncrease number by 1If number is <= 50, go back to "check" block.The check block has a diamond shape.
At the "yes" branch of the check block, you can create separate blocks for updating the sum and the product.
Connect the blocks using arrows.
Indicate the start and the end of the flow using the appropriate symbols.
The block to check if a number is a prime you could further decompose into the steps needed to do such a check.
What is indirect program memory addressing? Explain the working of the following instructions?
a) JMP AX
b) JMP LIST[DX]
c) JMP NEAR PTR[DI+3]
The instructions operate as follows:
a)
JMP AX :
The JMP instruction is being used to execute an unconditional jump.AX is indeed the label's name. JMP AX codes are being used to transfer control of the flow program to the AX label.b)
JMP LIST:
The JMP command can be used to execute an unconditional jump, JMP LIST[DX] is the label's name. The JMP LIST[DX] program is being used to transfer control of its flow programs to the specified section. It is the segment to which the flow control is transmitted.c)
JMP NEAR PTR[DI+3]:
Unconditional jumps could be done with the JMP command as you'll see, the label is JMP NEAR PTR[DI+3]. It's being used to transmit flow control to a particular section, throughout this case [DI+3]. The close keyword indicates that perhaps the code segment would be in the line of code being nearby.Learn more:
brainly.com/question/20320915
Components of micro computer with diagram
Answer:
CPU, Program memory, Data memory, Output ports, Input ports and Clock generator.
Explanation:
There are six basic components of a microcomputer which includes CPU, Program memory, Data memory, Output ports, Input ports and Clock generator. CPU is the central processing unit which is considered as the brain of the computer. It is the part of a computer that executes instructions. Data memory is the place where data is stored that is present in the CPU.
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah….
a. Margin
b. View
c. LayOut
d. Paragraph
Office 92 sering disebut juga dengan….
a. Office 3.0
b. Office 7.0
c. Office Xp
d. Office 2.0
Fasilitas untuk pengaturan batas kertas pada Microsoft Word adalah
B.View
Office 92 sering disebut juga dengan
A.Office 3.0
An error due to wrong input by the user
Answer:
when did it take place..
Instructions
Create a multimedia project that contains the text element and all the contents that you have studied about that element
Answer:
iiiio888887776558777u765
Write a program named lastname_firstname_cities.py that works with information about large cities. Your program will open the cities.txt downloadfile. Each line in the file has the name of a city, its country, and its population. The first few lines of the file look like this:
Answer and Explanation:
Open your text editor and open new file. Save new file file as lastname_firstname_cities.py. The program will open the file cities.txt downloadfile hence :
dfile= open(cities.txt, "r")
If we write this into our lastname_firstname_cities.py file it will open our cities.txt downloadfile in read mode and text mode(by default unless we specify binary mode which is for images)
explain computer coding in an understandable manner
Answer:
Coding is simply how we communicate with computers. Code tells a computer what actions to take, and writing code is like creating a set of instructions
Explanation:
Computer coding empowers kids to not only consume digital media and technology, but to create it. Instead of simply playing videogame or envision what their own website, or app might look like and they'll have the outlet for the expression
Discuss the DMA process
Answer:
Direct memory access (DMA) is a process that allows an input/output (I/O) device to send or receive data directly to or from the main memory, bypassing the CPU to speed up memory operations and this process is managed by a chip known as a DMA controller (DMAC).
Explanation:
A defined portion of memory is used to send data directly from a peripheral to the motherboard without involving the microprocessor, so that the process does not interfere with overall computer operation.
In older computers, four DMA channels were numbered 0, 1, 2 and 3. When the 16-bit industry standard architecture (ISA) expansion bus was introduced, channels 5, 6 and 7 were added.
ISA was a computer bus standard for IBM-compatible computers, allowing a device to initiate transactions (bus mastering) at a quicker speed. The ISA DMA controller has 8 DMA channels, each one of which associated with a 16-bit address and count registers.
ISA has since been replaced by accelerated graphics port (AGP) and peripheral component interconnect (PCI) expansion cards, which are much faster. Each DMA transfers approximately 2 MB of data per second.
A computer's system resource tools are used for communication between hardware and software. The four types of system resources are:
I/O addresses Memory addresses. Interrupt request numbers (IRQ). Direct memory access (DMA) channels.DMA channels are used to communicate data between the peripheral device and the system memory. All four system resources rely on certain lines on a bus. Some lines on the bus are used for IRQs, some for addresses (the I/O addresses and the memory address) and some for DMA channels.
A DMA channel enables a device to transfer data without exposing the CPU to a work overload. Without the DMA channels, the CPU copies every piece of data using a peripheral bus from the I/O device. Using a peripheral bus occupies the CPU during the read/write process and does not allow other work to be performed until the operation is completed.
With DMA, the CPU can process other tasks while data transfer is being performed. The transfer of data is first initiated by the CPU. The data block can be transferred to and from memory by the DMAC in three ways.
In burst mode, the system bus is released only after the data transfer is completed. In cycle stealing mode, during the transfer of data between the DMA channel and I/O device, the system bus is relinquished for a few clock cycles so that the CPU can perform other tasks. When the data transfer is complete, the CPU receives an interrupt request from the DMA controller. In transparent mode, the DMAC can take charge of the system bus only when it is not required by the processor.
However, using a DMA controller might cause cache coherency problems. The data stored in RAM accessed by the DMA controller may not be updated with the correct cache data if the CPU is using external memory.
Solutions include flushing cache lines before starting outgoing DMA transfers, or performing a cache invalidation on incoming DMA transfers when external writes are signaled to the cache controller.
Answer:
See explanation
Explanation:
DMA [tex]\to[/tex] Direct Memory Access.
The peripherals of a computer system are always in need to communicate with the main memory; it is the duty of the DMA to allow these peripherals to transfer data to and from the memory.
The first step is that the processor starts the DMA controller, then the peripheral is prepared to send or receive the data; lastly, the DMA sends signal when the peripheral is ready to carry out its operation.
Discuss the OSI Layer protocols application in Mobile Computing
Answer:
The OSI Model (Open Systems Interconnection Model) is a conceptual framework used to describe the functions of a networking system. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.
In the home tab under the paragraph group of options what are you unable to do?
Chất xơ có nhiều trong thực phẩm nào?
Answer: rau củ quả đều có lượng chất xơ nhiều hơn so với các loại thực phẩn khác
Explanation:
hi, please help me.solution.
Answer:
aahdbdnsjajaissjdjdhskakwjdhbebs
You have n warehouses and n shops. At each warehouse, a truck is loaded with enough goods to supply one shop. There are m roads, each going from a warehouse to a shop, and driving along the ith road takes d i hours, where d i is an integer. Design a polynomial time algorithm to send the trucks to the shops, minimising the time until all shops are supplied.
Following are the steps of the polynomial-time algorithm:
Split the routes according to their categorizationAssuming that mid = di of the middle road, low = road with the least di, and high = road with the highest di, we may do a binary search on the sorted list.All shops must be approachable only using these roads for every road, from low to mid.Check if all shops can be reached from[tex]\bold{ low \ to\ mid+1}[/tex] using only these roads.There is a solution if every shop can be reached by road only up to [tex]\bold{mid+1}[/tex], but not up to mid.You can [tex]\bold{set \ low = mid+1}[/tex] if all businesses aren't accessible using both [tex]\bold{mid\ and\ mid+1}[/tex] roads.If every shop could be reached using both mid and mid+1, then set high to mid-1.With these layouts of businesses and roads, no response can be given because [tex]\bold{ low > high}[/tex]You can do this by [tex]\bold{set\ mid = \frac{(low + high)}{2}}[/tex]The new low, mid, and high numbers are used in step (a).In a minimum amount of time, this algorithm will determine the best strategy to supply all shops.
Learn more:
polynomial-time algorithm: brainly.com/question/20261998
Explain the purpose of the open() and close() operations.
Answer:
The open() operation notifies the system that the named file is about to become active. The close() operation notifies the system that the named file is no longer in active use by the user who issued the close operation.
I connected to an external hard drive to transfer some photos from my vacation. When I try to drag the photo, it bounces right back and does not transfer. What is the likely cause of this issue?
a. hard drive is full
b. photos were taken in a different country
c. USB port is broken
d. the file structure of the 2 hard drives are not compatible
The answer is D, What is the likely cause of this issue is that the file structure of the two hard drives are not compatible.
The file structure or file system, of a hard drive, tells the disk how to read, write and store information on the drive. Some file systems do not allow the disk to store any files and often do not display error messages. If we try to drag a file onto a hard drive with this kind of file structure, the action would simply not be performed. This can be fixed by formatting the disk partition into a new file system.
Option B states that the issue may be that the photos were taken in a different country. This is not the cause of the problem because regardless of where the pictures are taken, they are all stored in common formats such as:
JPEGPNGJFIFAny external hard drive capable of storing images will have the ability to receive files in these formats as well as many other image formats. For this reason, option B is False.
The question states that you were able to connect the external Hard drive and drag files onto it, though unsuccessfully. This tells us that the USB port is working as intended, if it were not working, it would not display the Hard drive onto the computer and we would not be able to drag files to it. Therefore, option C is false
Insufficient Hard drive storage space is a common issue in not being able to transfer files between hard drives. However, if this were the case, the user would be shown a message displaying the error. The message may look like:
"Insufficient space on the disk.""The Disk is full.""Not enough memory to complete this action"The exact wording may vary depending on the operating system in use. Since the question states that the files simply "bounces back" without an error message displaying, we can infer that option A is false.
For more help with Hard drive issues see: https://brainly.com/question/14254444?referrer=searchResults
Which one is the result of the ouWhen you move a file to the Recycle Bin, it will be immediately deleted from your computer.
A. True
B. Fals
Answer:
B => false
Explanation:
it just keep it on recycle bin => not being removed
e) Point out the errors( if any) and correct them:-
class simple
{
inta,b,c;
double sumNumber
{
int d = a + b + c;
double e = d/5.6;
return e;
}
void show Number()
{
a = 10, b = 20, c=5;
System.out.println(d);
double f = sumNumber(a,b,c);
System.out.print(e);
}
}
Explanation:
double e-d/5.6;is wrong it should return to c
Select the scenario that describes a top-down approach to data warehouse design.
Cathy’s Cards and Gifts, which has three stores, creates data marts for its sales, marketing, and delivery departments to study the possibility of establishing a new store.
Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
Cynthia’s Florals, which is dealing with debt, creates new data marts for the service, delivery, and sales departments to develop a strategy to stay in business.
Connor’s Meat Market, which just opened, creates data marts to track the sale of each of the following meats: beef, pork, lamb, and fish.
Answer:
Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
The scenario defines a top-down approach to data warehouse design as "Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed".
What is a top-down approach to data warehouse design?In the "Top-Down" method system, a data warehouse exists defined as a subject-oriented, time-variant, non-volatile, and integrated data storage for the entire business data from various sources exist validated, reformatted, and saved in a normalized (up to 3NF) database as the data warehouse.
Therefore, the correct answer is option b) Crawford's Fabrics, which wants to expand its operations, combines data from the purchasing and sales departments into a central database, to be divided into new data marts as needed.
To learn more about warehouse design
https://brainly.com/question/25885061
#SPJ2
Argue whether we can infer anything about a candidate’s ability to work in a professional environment based on his or her resume’s formatting.
Compare how you would address a resume with wacky fonts to how you would respond to grammatical errors in a resume.
Answer:
when dressing feaded back is postive and then list areas of inprovmenr to met the job requirements
Explanation:
Write a program that asks the user to enter in a username and then examines that username to make sure it complies with the rules above. Here's a sample running of the program - note that you want to keep prompting the user until they supply you with a valid username:
user_in = input ("Please enter your username: " )
if user_in in "0123456789":
print ("Username cannot contain numbers")
elif user_in in "?":
print ("Username cannot continue special character")
else:
print (" Welcome to your ghetto, {0}! ".format(user_in))
Select the correct statement(s) regarding IP addressing.
a. IPv4 and IPv6 addressing is fully compatible with one another.
b. CIDR address format represents a Class C network only used within an intranet.
c. Subnet masks are used with both class and classless IP addresses.
d. all statements are correct.
Subnet masks are used with both class and classless IP addresses is the correct statement. Therefore, the correct option is C.
What is an IP address?A device on the internet or a local network may be identified by its IP address, which is a special address. The rules defining the format of data delivered over the internet or a local network are known as “Internet Protocol,” or IP.
Only C is correct, rest other statements are incorrect because:
a. IPv4 and IPv6 addressing is fully compatible with one another is incorrect. While IPv4 and IPv6 can coexist on the same network, they are not fully compatible with one another.
b. CIDR address format represents a Class C network only used within an intranet is incorrect. Classless Inter-Domain Routing (CIDR) is a technique used to allocate IP addresses more efficiently.
Therefore, subnet masks are used with both class and classless IP addresses is the correct statement. Therefore, the correct option is C.
Learn more about, here
https://brainly.com/question/3805118
#SPJ6
Mobile computing is growing in importance each and every day, and the IT manager must take that into account. Do some web research and develop a one-page description of the five most important things about HCI of mobile computing that the IT manager should know.
Answer:
phone grows everyday 82 percent
Explanation:
What do you do if your computer dies/malfunctions? Reboot (Restart) Shut Down Recovery CD and Recover your system Call a person to fix it
Answer:
Restart
Explanation:
Simply I may restart my pc if it dies/malfunctions. I'll not restart immediately, I'll wait for an hour and do restart my computer. If it doesn't work then maybe I'll Call a person to fix it.
T
N
O
?
You can insert only the row
only to
True or false
false
Explanation:
good luck bro
have a great day
Answer:
false
Explanation:
In order to print multiple worksheets, what needs to happen before printing?
Answer:
Explanation:
Click the File tab.
Click Print, or press the control p keyboard command.
On the Print screen, select the printer and other settings.
Click Print.
Give examples of applications that access files by each of the following methods:
+ Sequentially.
+ Random.
Answer:
Explanation:
Usually, applications would have the capability of using either one of these options. But for the sake of the question here are some that usually prefer one method over the other.
Any program that targets an API usually uses Sequential access. This is because API's contain all of the data as objects. Therefore, you need to access that object and sequentially navigate that object to the desired information in order to access the data required.
A music application would have access to an entire folder of music. If the user chooses to set the application to randomly play music from that folder, then the application will use a Random Access method to randomly choose the music file to load every time that a song finishes.
